Kinetics and Mechanism of In(III) Ions Electroreduction on Cyclically Renewable Liquid Silver Amalgam Film Electrode: Significance of the Active Complexes of In(III)—Acetazolamide

The results of kinetic measurements revealed an accelerating effect of acetazolamide (ACT) on the multistep In(III) ions electroreduction in chlorates(VII) on a novel, cyclically renewable liquid silver amalgam film electrode (R–AgLAFE). The kinetic and thermodynamic parameters were determined by applying the DC polarography, square-wave (SWV) and cyclic voltammetry (CV), as well as electrochemical impedance spectroscopy (EIS). It was shown that ACT catalyzed the electrode reaction (“cap-pair” effect) by adsorbing on the surface of the R–AgLAFE electrode. The catalytic activity of ACT was explained as related to its ability to form active In(III)- acetazolamide complexes on the electrode surface, facilitating the electron transfer process. The active complexes constitute a substrate in the electroreduction process and their different structures and properties are responsible for differences in the catalytic activity. The determined values of the activation energy ΔH≠ point to the catalytic activity of ACT in the In(III) ions electroreduction process in chlorates(VII). Analysis of the standard entropy values ΔS0 confirm changes in the dynamics of the electrode process.

A quinoline-benzothiazole-based chemosensor coupled with a smartphone for the rapid detection of In3+ ions

A newly designed quinoline-benzothiazole probe 2-((Z)-((E)-benzo[d]thiazol-2(3H)-ylidenehydrazono)methyl)quinolin-8-ol (L) was synthesized by reacting 8-hydroxyquinoline-2-carbaldehyde with 2-hydrazinobenzothiazole and structurally characterized by various spectroscopic techniques. The sensing ability of probe L was studied with various cations using colorimetry, test paper strips, a red-green-blue (RGB) model and UV-visible spectrophotometry in DMSO : H₂O (3 : 7, v/v). The pale yellow colour of L turns into orange on contact with In³⁺ ions, whereas other tested metal ions did not show any change in colour. The probe L exhibits an absorbance band at 360 nm due to ligand-to-ligand charge transfer (LLCT); upon interaction with In³⁺ ions, it exhibits a band at 445 nm due to ligand-to-metal charge transfer (LMCT). The probe L binds In³⁺ in a 2 : 1 ratio with an association constant of 8.1 × 10⁵ M^-1 and this is established using the Job's and Benesi-Hildebrand (B-H) methods. The probe L can work in the pH range of 4-8 without interfering with other competing ions. It can be used to detect quantities as low as 2.3 ppb and 85 ppb by spectrophotometry and RGB, respectively. The binding mechanism was studied by ¹H NMR titration, ESI mass and FT-IR spectral analysis and well supported by theoretical studies. Overall, probe L demonstrates promising potential for the detection of In³⁺ ions in the semi-aqueous phase and this is its first report as a colorimetric chromogenic probe.

Selective ratiometric red-emission detection of In3+ in aqueous solutions and in live cells using a fluorescent peptidyl probe and metal chelating agent

Indium has been regarded as one of the most rarely used metal ions; however, the consumption of indium has increased intensively due to its increasing use in electrodes of liquid crystal displays (LCDs). In recent years, warnings have been issued about the toxicity of indium to aquatic ecosystems and humans. Thus, the development of efficient and selective detection methods for In³⁺ in aquatic environments as well as in live cells is highly required. However, the selective and sensitive detection of In³⁺ in the presence of trivalent metal ions and other metal ions is highly challenging. In the present study, we synthesized a fluorescent probe (1) for In³⁺ and Al³⁺ based on an unnatural peptide receptor and an aggregation-induced emission fluorophore and developed a selective fluorescent detection method for In³⁺ in aqueous solutions and live cells using the probe and a metal chelating agent. 1 recognized In³⁺ and Al³⁺ selectively among 19 metal ions in aqueous solutions depending on pH by the enhancement of the red emission at 600 nm and decrease in the green emission at 530 nm. 1 sensitively detected In³⁺ and Al³⁺ by ratiometric response in a wide pH range (3.5-7.4), and the ratiometric response was complete within 20 seconds in an aqueous buffered solution at pH 5.0. Interestingly, the addition of EDTA to the complex of 1 with In³⁺ or Al³⁺ did not induce the Al³⁺-free spectrum but instead induced the In³⁺-free spectrum; thus, In³⁺ and Al³⁺ could be easily differentiated. The detection limit of 1 for In³⁺ ions was 211 nM (R² = 0.981) in purely aqueous solutions. The fluorescence ratiometric detection method using 1 could quantify low concentrations of In³⁺ in ground water and tap water. Fluorescence cell image studies revealed that the probe was cell-permeable, and low concentrations of In³⁺ inside the cells could be recognized by the enhancement of the red emission at 600 nm. The binding mode study via NMR, IR, and CD spectroscopy revealed how the peptide receptor of 1 interacted with In³⁺ and resulted in the enhancement of the red emission in an aqueous solution.

Reduced texaphyrin: A ratiometric optical sensor for heavy metals in aqueous solution

We report here a water-soluble metal cation sensor system based on the as-prepared or reduced form of an expanded porphyrin, texaphyrin. Upon metal complexation, a change in the redox state of the ligand occurs that is accompanied by a color change from red to green. Although long employed for synthesis in organic media, we have now found that this complexation-driven redox behavior may be used to achieve the naked eye detectable colorimetric sensing of several number of less-common metal ions in aqueous media. Exposure to In(III), Hg(II), Cd(II), Mn(II), Bi(III), Co(II), and Pb(II) cations leads to a colorimetric response within 10 min. This process is selective for Hg(II) under conditions of competitive analysis. Furthermore, among the subset of response-producing cations, In(III) proved unique in giving rise to a ratiometric change in the ligand-based fluorescence features, including an overall increase in intensity. The cation selectivity observed in aqueous media stands in contrast to what is seen in organic solvents, where a wide range of texaphyrin metal complexes may be prepared. The formation of metal cation complexes under the present aqueous conditions was confirmed by reversed phase high-performance liquid chromatography, ultra-violet-visible absorption and fluorescence spectroscopies, and high-resolution mass spectrometry.

A selective “turn-on” sensor for recognizing In3+ and Zn2+ in respective systems based on imidazo[2,1-b]thiazole

An imidazo[2,1-b]thiazole-based compound (X) was designed and synthesized as an “off–on–off” sensor for the multiple recognition of In³⁺ and Zn²⁺ in different systems.

A fluorescence probe based on 6-phenylimidazo[2,1-b]thiazole and salicylaldehyde for the relay discerning of In3+ and Cr3+

A new fluorescence probe, (E)-N′-(2-hydroxybenzylidene)-6-phenylimidazo[2,1-b]thiazole-3-carbohydrazide (LB1), based on 6-phenylimidazo[2,1-b]thiazole and salicylaldehyde was designed and synthesized.

Double Schiff base from thiophene-2,5-dicarboxylic acid as an “off–on–off” fluorescence sensor for the sequential detection of In3+ and PPi

A double Schiff base T as acceptor for metal ions derived from thiophene-2,5-dicarboxylic acid was designed and synthesized, and showed a high selectivity for In³⁺ in a DMF/H₂O buffer solution.

A hydrazono-quinoline-based chemosensor sensing In3+ and Zn2+via fluorescence turn-on and ClO−via color change in aqueous solution

A multi-target sensor, based on hydrazono-quinoline, was developed for fluorescence turn-on detection of In³⁺ and Zn²⁺ and colorimetric detection of ClO⁻.

Integrated pyrazolo[1,5-a]pyrimidine-hemicyanine system as a colorimetric and fluorometric chemosensor for cyanide recognition in water

A new probe for cyanide detection based on the integrated pyrazolo[1,5-a]pyrimidine-hemicyanine (PpHe) system was synthesized in an efficient and straightforward manner using microwave-assisted heating. Photophysical studies in a 100% aqueous solution demonstrated high cyanide selectivity and detection limits as low as 600 and 86 nmol L^-1 for UV-vis absorption and fluorescence emission, respectively. Both values are well below 1900 nmol L^-1, which is the maximum concentration permitted for drinking water by the World Health Organization (WHO). HRMS analysis and NMR experiments were performed to confirm the mechanism of detection based on blocking the ICT phenomenon via nucleophilic addition of CN^- on the C˭N⁺ bond (iminium salt moiety) of the probe.

A dual target chemosensor for the fluorometric detection of In3+ and colorimetric detection of Fe3

A new dual target chemosensor 1, 1,1'‑((1E,1'E)‑((thiobis(ethane‑2,1‑diyl))bis(azanylylidene))bis(methanylylidene))bis(naphthalen‑2‑ol), was prepared by the reaction of a hydroxy-naphthaldehyde and a thiobis(ethylamine). Sensor 1 detected In³⁺ with turn-on fluorescence and Fe³⁺ via the change of color from colorless to pale violet. The sensing behaviors of 1 toward In³⁺ and Fe³⁺ were studied through photophysical experiments, ESI-mass, NMR titration, and theoretical calculations. In particular, 1 can discriminate In³⁺ from Al³⁺ and Fe³⁺ from Fe²⁺. Limits of detection for the analysis of In³⁺ and Fe³⁺ ions turned out to be 5.89 μM and 0.30 μM, respectively. In addition, sensor 1 functioned practically as a naked-eye test strip for Fe³⁺ and could be recycled by using EDTA for In³⁺ and DFO for Fe³⁺.

A Highly Selective Fluorescent Chemosensor for Detecting Indium(III) with a Low Detection Limit and its Application

A highly selective chemosensor BHC ((E)-N-benzhydryl-2-((2-hydroxynaphthalen-1-yl)methylene)hydrazine-1-carbothioamide) for detecting indium(III) was synthesized. Sensor BHC can detect In(III) by a fluorescence turn-on method. The detection limit was analyzed to be 0.89 μM. Importantly, this value is the lowest among those previously known for fluorescent turn-on In(III) chemosensors. Based on the analytical methods like ESI-mass, Job plot, and theoretical calculations, the detection mechanism for In(III) was illustrated to be chelation-enhanced fluorescence (CHEF) effect. Additionally, sensor BHC was successfully applied to test strips.

Asymmetric total synthesis of talienbisflavan A

The first asymmetric total syntheses of talienbisflavan A and bis-8,8'-epicatechinylmethane as well as a facile synthesis of bis-8,8'-catechinylmethane has been accomplished from readily available starting materials by using a newly developed direct regioselective methylenation of catechin derivatives as one of the key steps.

A multifunctional selective “turn-on” fluorescent chemosensor for detection of Group IIIA ions Al3+, Ga3+ and In3+

A versatile chemosensor was developed for highly distinguishable and selective recognition of group IIIA metal ions (Al³⁺, Ga³⁺ and In³⁺).

Synthesis and evaluation of the antitumor activity of highly functionalised pyridin-2-ones and pyrimidin-4-ones

The methods for selective synthesis of two novel types of compounds including pyridin-2-ones 3 and pyrimidin-4-ones 4 were developed. The antitumor bioactivity screening showed that certain compounds had potent antitumor activity.

Regioselective electrophilic aromatic bromination: theoretical analysis and experimental verification

Electrophilic aromatic bromination is the most common synthetic method used to prepare aryl bromides, which are very useful intermediates in organic synthesis. To understand the experimental results in electrophilic aromatic brominations, ab initio calculations are used here for a tentative analysis of the positional selectivity. The calculated results agree well with the corresponding experimental data, and the reliability of the resulting positional selectivity was verified by the corresponding experimental data.

Synthesis of functional 4H-chromenes from phenols and acetophenones under solvent- and metal-free conditions

Sulfuric-acid-promoted tandem reaction of phenols with acetophenones under solvent- and metal-free conditions has been developed, which afforded functional 4H-chromenes in good yields with water as the side product.

Water-promoted ortho-selective monohydroxymethylation of phenols in the NaBO2 system

Water-promoted ortho-selective monohydroxymethylation of phenols in the NaBO₂ system generates salicyl alcohols in excellent yields.

Synthetic Studies on Potent Marine Drugs: Synthesis and the Crystal Structure of 6-tert-butyl-4-phenyl-4H-chromene-2-carboxylic Acid

4H-Chromene-2-carboxylic acid ester derivatives of renieramycin M might be of use for the structural-activity relationship studies of antitumor antibiotic tetrahydroisoquinoline natural products. Accordingly, 6-tert-butyl-4-phenyl-4H-chromene-2-carboxylic acid, one key intermediate, was synthesized via the condensation of (3E)-2-oxo-4-phenylbut-3-enoate methyl ester with 4-tert-butylphenol in the presence of AuCl3/3AgOTf (5 mol%), followed by cyclodehydration and aqueous hydrolysis. The product was unambiguously shown to the 4H-chromene-2-carboxylic acid by spectroscopy and X-ray crystallographic analysis. A packing diagram of the crystal structure shows that aromaticπ-stacking interactions and O–H⋯O hydrogen bond stabilize the structure in the solid.