Photosensitized addition of isopropanol to furanones in a 365 nm UV-LED microchip

Photochemical reactions of biomass derived platform chemicals

Platform chemicals obtained from biomass will play an important role in chemical industry. Already existing compounds or not yet established chemicals are produced from this renewable feedstock. Using photochemical reactions as sustainable method for the conversion of matter furthermore permits to develop processes that are interesting from the ecological and economical point of view. Furans or levoglucosenone are thus obtained from carbohydrate containing biomass. Photochemical rearrangements, photooxygenation reactions or photocatalytic radical reactions can be carried out with such compounds. Also, sugars such pentoses or hexoses can be more easily transformed into heterocyclic target compounds when such photochemical reactions are used. Lignin is an important source for aromatic compounds such as vanillin. Photocycloaddition of these compounds with alkenes or the use light supported multicomponent reactions yield interesting target molecules. Dyes, surfactants or compounds possessing a high degree of molecular diversity and complexity have been synthesized with photochemical key steps. Alkenes as platform chemicals are also produced by fermentation processes, for example, with cyanobacteria using biological photosynthesis. Such alkenes as well as terpenes may further be transformed in photochemical reactions yielding, for example, precursors of jet fuels.

Daylight LED promotes photochemical ring contraction of 2-amine-4H-pyran-3-carbonitriles with consequent loss of their antifungal activity

The initial objective of our work was to synthesize a series of 2-amino-4H-pyran-3-carbonitriles to be tested for their antifungal activities against economically relevant phytopathogenic fungi. Fourteen compounds were prepared in up to 94% yield and shown percentages of Botrytis cinerea inhibition above 70%. Despite the promising biological results, we observed that stock solutions prepared for biological tests showed color changing when kept for a few days on the laboratory bench, under room conditions, illuminated by common LED daylight tubes (4500-6000 k). This prompted us to investigate the possible photo-induced degradation of our compounds. FT-IR ATR experiments evidenced variations in the expected bands for functional of -amino-4H-pyran-3-carbonitriles stored under LED daylight. Following, HPLC-UV analysis showed reductions in the intensity of chromatographic peaks of 2-amino-4H-pyran-3-carbonitriles, and but not for solutions kept in the dark. A solution of (E)-2-amino-8-(4-nitrobenzylidene)-4-(4-nitrophenyl)-5,6,7,8-tetrahydro-4H-chromene-3-carbonitrile underwent 84.4% of conversion after 72 h of exposure to continuous LED daylight in a BOD chamber, and the reaction product was isolated in 36% yield and characterized as (E)-7-cyano-5-(4-nitrobenzylidene)-8-(4-nitrophenyl)bicyclo[4.2.0]oct-1(6)-ene-7-carboxamide (7*). Despite freshly prepared solutions of 2-amino-4H-pyran-3-carbonitriles produced antifungal activities, these solutions lost biological activity when left on the bench for a week. Besides, compound 7* formed from photo-induced degradation of 7 also showed no antifungal activity. With this, we hope to bring two contributions: (1) production of cyclobutenes through photochemical reactions of 2-amino-4H-pyran-3-carbonitriles can be carried out through exposure to simple white LED daylight; (2) biological applications of such 2-amino-4H-pyran-3-carbonitriles may be impaired by their poor photostability.

Direct Photocatalyzed Hydrogen Atom Transfer (HAT) for Aliphatic C-H Bonds Elaboration

Direct photocatalyzed hydrogen atom transfer (d-HAT) can be considered a method of choice for the elaboration of aliphatic C–H bonds. In this manifold, a photocatalyst (PC_HAT) exploits the energy of a photon to trigger the homolytic cleavage of such bonds in organic compounds. Selective C–H bond elaboration may be achieved by a judicious choice of the hydrogen abstractor (key parameters are the electronic character and the molecular structure), as well as reaction additives. Different are the classes of PCs_HAT available, including aromatic ketones, xanthene dyes (Eosin Y), polyoxometalates, uranyl salts, a metal-oxo porphyrin and a tris(amino)cyclopropenium radical dication. The processes (mainly C–C bond formation) are in most cases carried out under mild conditions with the help of visible light. The aim of this review is to offer a comprehensive survey of the synthetic applications of photocatalyzed d-HAT.

Dawn of a new era in industrial photochemistry: the scale-up of micro- and mesostructured photoreactors

Photochemical activation routes are gaining the attention of the scientific community since they can offer an alternative to the traditional chemical industry that mainly utilizes thermochemical activation of molecules. Photoreactions are fast and selective, which would potentially reduce the downstream costs significantly if the process is optimized properly. With the transition towards green chemistry, the traditional batch photoreactor operation is becoming abundant in this field. Process intensification efforts led to micro- and mesostructured flow photoreactors. In this work, we are reviewing structured photoreactors by elaborating on the bottleneck of this field: the development of an efficient scale-up strategy. In line with this, micro- and mesostructured bench-scale photoreactors were evaluated based on a new benchmark called photochemical space time yield (mol·day⁻¹·kW⁻¹), which takes into account the energy efficiency of the photoreactors. It was manifested that along with the selection of the photoreactor dimensions and an appropriate light source, optimization of the process conditions, such as the residence time and the concentration of the photoactive molecule is also crucial for an efficient photoreactor operation. In this paper, we are aiming to give a comprehensive understanding for scale-up strategies by benchmarking selected photoreactors and by discussing transport phenomena in several other photoreactors.

Sensitized [2 + 2] intramolecular photocycloaddition of unsaturated enones using UV LEDs in a continuous flow reactor: kinetic and preparative aspects

A photocatalysed cycloaddition by benzophenone derivatives under flow and UVA LED irradiation is described.

High-Power 365 nm UV LED Mercury Arc Lamp Replacement for Photochemistry and Chemical Photolithography

Ultraviolet light emitting diodes (UV LEDs) have become widespread in chemical research as highly efficient light sources for photochemistry and photopolymerization. However, in more complex experimental setups requiring highly concentrated light and highly spatially resolved patterning of the light, high-pressure mercury arc lamps are still widely used because they emit intense UV light from a compact arc volume that can be efficiently coupled into optical systems. Advances in the deposition and p-type doping of gallium nitride have recently permitted the manufacture of UV LEDs capable of replacing mercury arc lamps also in these applications. These UV LEDs exceed the spectral radiance of mercury lamps even at the intense I-line at 365 nm. Here we present the successful exchange of a high-pressure mercury arc lamp for a new generation UV LED as a light source in photolithographic chemistry and its use in the fabrication of high-density DNA microarrays. We show that the improved light radiance and efficiency of these LEDs offer substantial practical, economic and ecological advantages, including faster synthesis, lower hardware costs, very long lifetime, an >85-fold reduction in electricity consumption and the elimination of mercury waste and contamination.

A calibrated UV-LED based light source for water purification and characterisation of photocatalysis

Photocatalysis can become a cost effective industrial process for water cleaning. This paper describes the design and performance of a novel LED-based light engine for this purpose.

Studies in organic and physical photochemistry - an interdisciplinary approach

Traditionally, organic photochemistry when applied to synthesis strongly interacts with physical chemistry. The aim of this review is to illustrate this very fruitful interdisciplinary approach and cooperation. A profound understanding of the photochemical reactivity and reaction mechanisms is particularly helpful for optimization and application of these reactions. Some typical reactions and particular aspects are reported such as the Norrish-Type II reaction and the Yang cyclization and related transformations, the [2 + 2] photocycloadditions, particularly the Paternò-Büchi reaction, photochemical electron transfer induced transformations, different kinds of catalytic reactions such as photoredox catalysis for organic synthesis and photooxygenation are discussed. Particular aspects such as the structure and reactivity of aryl cations, photochemical reactions in the crystalline state, chiral memory, different mechanisms of hydrogen transfer in photochemical reactions or fundamental aspects of stereoselectivity are discussed. Photochemical reactions are also investigated in the context of chemical engineering. Particularly, continuous flow reactors are of interest. Novel reactor systems are developed and modeling of photochemical transformations and different reactors play a key role in such studies. This research domain builds a bridge between fundamental studies of organic photochemical reactions and their industrial application.

Applications of Continuous-Flow Photochemistry in Organic Synthesis, Material Science, and Water Treatment

Continuous-flow photochemistry in microreactors receives a lot of attention from researchers in academia and industry as this technology provides reduced reaction times, higher selectivities, straightforward scalability, and the possibility to safely use hazardous intermediates and gaseous reactants. In this review, an up-to-date overview is given of photochemical transformations in continuous-flow reactors, including applications in organic synthesis, material science, and water treatment. In addition, the advantages of continuous-flow photochemistry are pointed out and a thorough comparison with batch processing is presented.

Photochemically induced radical reactions with furanones

Radicals are easily generated via hydrogen transfer form secondary alcohols or tertiary amines using photochemical sensitization with ketones. They can subsequently add to the electron deficient double bond of furanones. The addition of the alcohols is particularly efficient. Therefore, this reaction was used to characterize and to compare the efficiency of different photochemical continuous flow microreactors. A range of micro-structured reactors were tested and their performances evaluated. The enclosed microchip enabled high space-time-yields but its microscopic dimensions limited its productivity. In contrast, the open microcapillary model showed a greater potential for scale-up and reactor optimization. A 10-microcapillary reactor was therefore constructed and utilized for typical R&D applications. Compared to the corresponding batch processes, the microreactor systems gave faster conversions, improved product qualities and higher yields. Similar reactions have also been carried out with electronically excited furanones and other α,β-unsaturated ketones. In this case, hydrogen is transferred directly to the excited olefin. This reaction part may occur either in one step, i.e., electron and proton are transferred simultaneously, or it may occur in two steps, i.e., the electron is transferred first and the proton follows. In the first case, a C–C bond is formed in the α position of the α,β-unsaturated carbonyl compound and in the second case this bond is formed in the β position. For the first reaction, the influence of stereochemical elements of the substrate on the regioselectivity of the hydrogen abstraction on the side chain has been studied.

Photochemical transformations accelerated in continuous-flow reactors: basic concepts and applications

Continuous-flow photochemistry is used increasingly by researchers in academia and industry to facilitate photochemical processes and their subsequent scale-up. However, without detailed knowledge concerning the engineering aspects of photochemistry, it can be quite challenging to develop a suitable photochemical microreactor for a given reaction. In this review, we provide an up-to-date overview of both technological and chemical aspects associated with photochemical processes in microreactors. Important design considerations, such as light sources, material selection, and solvent constraints are discussed. In addition, a detailed description of photon and mass-transfer phenomena in microreactors is made and fundamental principles are deduced for making a judicious choice for a suitable photomicroreactor. The advantages of microreactor technology for photochemistry are described for UV and visible-light driven photochemical processes and are compared with their batch counterparts. In addition, different scale-up strategies and limitations of continuous-flow microreactors are discussed.

OLEDs as prospective light sources for microstructured photoreactors

The use of OLEDs to initiate photochemical reactions is demonstrated for the first time by conducting photooxygenations in a modular microstructured photoreactor.

OLEDs as prospective light sources for microstructured photoreactors

The use of OLEDs to initiate photochemical reactions is demonstrated for the first time by conducting photooxygenations in a modular microstructured photoreactor.

From 'Lab & Light on a Chip' to Parallel Microflow Photochemistry

Continuous-flow microreactors offer major advantages for photochemical applications. This mini-review summarizes the technological development of microflow devices in the Applied and Green Photochemistry Group at James Cook University, and its associates, from fixed microchips for microscale synthesis to flexible multicapillary systems for parallel photochemistry. Whereas the enclosed microchip offered high space–time-yields, the open capillary-type reactor showed a greater potential for further modifications. Consequently, a 10-microcapillary reactor was constructed and used successfully for process optimization, reproducibility studies, scale-up, and library synthesis. To demonstrate the superiority of microflow photochemistry over conventional batch processes, the reactors were systematically evaluated using alcohol additions to furanones as model reactions. In all cases, the microreactor systems furnished faster conversions, improved product qualities, and higher yields. UVC-induced [2+2] cycloadditions of furanone with alkenes were exemplarily examined in a capillary reactor, thus proving the broad applicability of this reactor type.

Tandem dienone photorearrangement-cycloaddition for the rapid generation of molecular complexity

A tandem dienone photorearrangement-cycloaddition (DPC) reaction of novel cyclohexadienone substrates tethered with various 2π and 4π reaction partners resulted in the formation of polycyclic, bridged frameworks. In particular, use of alkynyl ether-tethered substrates led to (3 + 2) cycloaddition to afford strained alkenes which could be further elaborated by intra- and intermolecular cycloaddition chemistry to produce complex, polycyclic chemotypes.

Microflow photochemistry: UVC-induced [2 + 2]-photoadditions to furanone in a microcapillary reactor

[2 + 2]-Cycloadditions of cyclopentene and 2,3-dimethylbut-2-ene to furanone were investigated under continuous-flow conditions. Irradiations were conducted in a FEP-microcapillary module which was placed in a Rayonet chamber photoreactor equipped with low wattage UVC-lamps. Conversion rates and isolated yields were compared to analogue batch reactions in a quartz test tube. In all cases examined, the microcapillary reactor furnished faster conversions and improved product qualities.

Flow photochemistry: Old light through new windows

Synthetic photochemistry carried out in classic batch reactors has, for over half a century, proved to be a powerful but under-utilised technique in general organic synthesis. Recent developments in flow photochemistry have the potential to allow this technique to be applied in a more mainstream setting. This review highlights the use of flow reactors in organic photochemistry, allowing a comparison of the various reactor types to be made.

Recent advances in microflow photochemistry

This review summarizes recent advances in microflow photochemical technologies and transformations. The portfolio of reactions comprises homogeneous and heterogeneous types, among them photoadditions, photorearrangements, photoreductions, photodecarboxylations, photooxygenations and photochlorinations. While microflow photochemistry is most commonly employed as a micro-scale synthesis tool, scale-up and technical production processes have already been developed.

Microphotochemistry: 4,4'-Dimethoxybenzophenone mediated photodecarboxylation reactions involving phthalimides

A series of 4,4'-dimethoxybenzophenone mediated intra- and intermolecular photodecarboxylation reactions involving phthalimides have been examined under microflow conditions. Conversion rates, isolated yields and chemoselectivities were compared to analogous reactions in a batch photoreactor. In all cases investigated, the microreactions gave superior results thus proving the superiority of microphotochemistry over conventional technologies.

Microphotochemistry: a reactor comparison study using the photosensitized addition of isopropanol to furanones as a model reaction

Three types of micro-photoreactor setups were investigated using DMBP-sensitized additions of isopropanol to furanones as model reactions. The results were compared to experiments using a conventional batch reactor. Based on conversion rates, reactor geometries and energy efficiency calculations the microsystems showed superior performances over the batch process. Of the three micro setups examined, the LED-driven microchip gave the best overall results.