Recent Advances in Polymers Bearing Activated Esters for the Synthesis of Glycopolymers by Postpolymerization Modification

Glycopolymers are functional polymers with saccharide moieties on their side chains and are attractive candidates for biomaterials. Postpolymerization modification can be employed for the synthesis of glycopolymers. Activated esters are useful in various fields, including polymer chemistry and biochemistry, because of their high reactivity and ease of reaction. In particular, the formation of amide bonds caused by the reaction of activated esters with amino groups is of high synthetic chemical value owing to its high selectivity. It has been employed in the synthesis of various functional polymers, including glycopolymers. This paper reviews the recent advances in polymers bearing activated esters for the synthesis of glycopolymers by postpolymerization modification. The development of polymers bearing hydrophobic and hydrophilic activated esters is described. Although water-soluble activated esters are generally unstable and hydrolyzed in water, novel polymer backbones bearing water-soluble activated esters are stable and useful for postpolymerization modification for synthesizing glycopolymers in water. Dual postpolymerization modification can be employed to modify polymer side chains using two different molecules. Thiolactone and glycine propargyl esters on the polymer backbone are described as activated esters for dual postpolymerization modification.

Metabolomics analysis of peony root using NMR spectroscopy and impact of the preprocessing method for NMR data in multivariate analysis

Peony root is an important herbal drug used as an antispasmodic analgesic. To evaluate peony roots with different botanical origins, producing areas, and post-harvest processing, 1H NMR-based metabolomics analysis was employed. Five types of monoterpenoids, including albiflorin (4), paeoniflorin (6), and sulfonated paeoniflorin (25), and six other compounds, including 1,2,3,4,6-penta-O-galloyl-β-D-glucose (18), benzoic acid (21), gallic acid (22), and sucrose (26) were detected in the extracts of peony root samples. Among them, compounds 4, 6, 18, and total monoterpenoids including 21 were quantified by quantitative 1H NMR (qHNMR). Compound 25 was detected in 1H NMR spectra of sulfur-fumigated white peony root (WPR) extracts indicating that 1H NMR was a fast and effective method for identifying sulfur-fumigated WPR. The content of 26, the main factor affecting extract yield, increased significantly in peony root after low-temperature storage for one month, whereas that in WPR did not increase due to the boiling treatment after harvesting. We investigated the impact of preprocessing methods to such analysis for NMR data from commercial samples, resulting that the data matrix transformed from qHNMR spectra and normalized to internal standard were optimum for multivariate analysis. The multivariate analysis demonstrated that among commercial samples derived from P. lactiflora, peony root samples in Japanese market (PR) had high contents of 18 and 22, and red peony root (RPR) samples had high content of monoterpenoids represented by 6; and among RPR samples, those derived from P. veitchii showed higher contents of 18 and 22 than those from P. lactiflora. The 1H NMR-based metabolomics method coupled with qHNMR was useful for evaluation of peony root and would be applicable for other crude drugs.

Metabolite profiling of Drynariae Rhizoma using 1H NMR and HPLC coupled with multivariate statistical analysis

Drynariae Rhizoma has been used to treat bone diseases and kidney deficiency in traditional medicine. Recently its aqueous extract was reported to enhance memory function. Although the Japanese standards for non-Pharmacopoeial crude drugs 2022 prescribed Drynaria roosii as the botanical origin, some counterfeits and both raw and stir-fired crude drugs are available in markets. To distinguish Drynariae Rhizoma derived from D. roosii appropriately from others and verify the validity of uses of stir-fried ones, 1H NMR-based metabolite profiling coupled with HPLC were performed. Raw samples derived from D. roosii contained naringin (1), neoeriocitrin (2), 5,7-dihydroxychromone-7-O-neohesperidoside (3), caffeic acid 4-O-β-D-glucoside (4), protocatechuic acid (5), trans-p-coumaric acid 4-O-β-D-glucoside (6), and kaempferol 3-O-α-L-rhamnoside 7-O-β-D-glucoside (8). Stir-fried samples were characterized by presence of 5-hydroxymethyl-2-furaldehyde (13), and were divided into two types; one possessing similar composition to raw samples (Type I) and another without above components except 5 (Type II). Quantitative analyses using qHNMR and HPLC, followed by principal component analysis demonstrated that the raw samples had higher contents of 1 (0.93-9.86 mg/g), 2 (0.74-7.59 mg/g), 3 (0.05-2.48 mg/g), 4 (0.27-2.51 mg/g), 6 (0.14-1.26 mg/g), and 8 (0.04-0.52 mg/g), and Type II had a higher content of 5 (0.84-1.32 mg/g). The counterfeit samples derived from Araiostegia divaricata var. formosana were characterized by higher content of ( -)-epicatechin 3-O-β-D-allopyranoside (10) (1.44-11.49 mg/g) without 1 and 2. These results suggested that Drynariae Rhizoma samples derived from other botanical origins and Type II stir-fried samples cannot substitute for D. roosii rhizome.

Mannose-based surfactant as biofunctional nanoemulsion stabilizer

The development and implementation of new amphiphiles based on natural resources rather than petrochemical precursors is an essential requirement due to their feedstock depletion and adverse environmental impacts. In addition, the use of bio-based surfactants can provide unique characteristics and improve the properties and versatility of the colloidal systems in which they are applied, such as emulsions. Here, the emulsification properties of a synthesized biocompatible mannose-based surfactant were investigated. Its behavior was evaluated in the presence of four different natural oils (castor, sunflower, olive and soybean) as well as two different aqueous phases (pure water and phosphate-buffered saline). The results highlighted its interest as surfactant in O/W nanoemulsions for all tested oil and aqueous phases, using a low-energy preparation protocol and relatively low surfactant concentrations. Furthermore, the mannose groups present on the polar head of the surfactant and adsorbed on the surface of the emulsion droplets were shown to retain their native biological properties. The specific mannose-concanavalin A binding was observed in vitro by the designed nanoemulsions, revealing the biorecognition properties of the surfactant and its potential applicability as a nanocarrier.

Hyaluronan (HA)-inspired glycopolymers as molecular tools for studying HA functions

Hyaluronic acid (HA), the only non-sulphated glycosaminoglycan, serves numerous structural and biological functions in the human body, from providing viscoelasticity in tissues to creating hydrated environments for cell migration and proliferation. HA is also involved in the regulation of morphogenesis, inflammation and tumorigenesis through interactions with specific HA-binding proteins. Whilst the physicochemical and biological properties of HA have been widely studied for decades, the exact mechanisms by which HA exerts its multiple functions are not completely understood. Glycopolymers offer a simple and precise synthetic platform for the preparation of glycan analogues, being an alternative to the demanding synthetic chemical glycosylation. A library of homo, statistical and alternating HA glycopolymers were synthesised by reversible addition-fragmentation chain transfer polymerisation and post-modification utilising copper alkyne-azide cycloaddition to graft orthogonal pendant HA monosaccharides (N-acetyl glucosamine: GlcNAc and glucuronic acid: GlcA) onto the polymer. Using surface plasmon resonance, the binding of the glycopolymers to known HA-binding peptides and proteins (CD44, hyaluronidase) was assessed and compared to carbohydrate-binding proteins (lectins). These studies revealed potential structure-binding relationships between HA monosaccharides and HA receptors and novel HA binders, such as Dectin-1 and DEC-205 lectins. The inhibitory effect of HA glycopolymers on hyaluronidase (HAase) activity was also investigated suggesting GlcNAc- and GlcA-based glycopolymers as potential HAase inhibitors.

Core-functionalized nanoaggregates: preparation via polymerization-induced self-assembly and their applications

Core-functionalized nanoaggregates can be prepared by a combination of polymerization-induced self-assembly (PISA) and post-polymerization modification.

Nonionic Dendritic and Carbohydrate Based Amphiphiles: Self-Assembly and Transport Behavior

Herein, a new series of non-ionic dendritic and carbohydrate based amphiphiles is synthesized employing biocompatible starting materials and studied for supramolecular aggregate formation in aqueous solution. The dendritic amphiphiles 12 and 13 possessing poly(glycerol) [G2.0] as hydrophilic unit and C-10 and C-18 hydrophobic alkyl chains, respectively, exhibit low critical aggregation concentration (CAC) in the order of 10^-5 m and hydrodynamic diameters in the 8-10 nm range and supplemented by cryogenic transmission electron microscopy. Ultraviolet-visible (UV-Vis) and fluorescence spectroscopy suggests the effective solubilization of hydrophobic guests by the self-assembled architectures, with the nanotransporters 12 and 13 possessing the highest encapsulation efficiency of 80.74 and 98.03% for curcumin. Efficient uptake of encapsulated curcumin in adenocarcinomic human alveolar basal epithelial (A549) cells is observed by confocal laser scanning microscopy. Amphiphiles 12 and 13 are non-cytotoxic at the concentrations studied, however, curcumin encapsulated samples efficiently reduce the viability of A549 cells in vitro. Experimental studies indicate the ability of amphiphile 13 to encapsulate 1-anilinonaphthalene-8-sulfonic acid (ANS) and curcumin with binding constant of 1.16 × 105⁵ m^-1 and 1.43 × 10⁶ m^-1 , respectively. Overall, our findings demonstrate the potential of these dendritic amphiphiles for the development of prospective nanocarriers for the solubilization of hydrophobic drugs.

Specific and Differential Binding of N-Acetylgalactosamine Glycopolymers to the Human Macrophage Galactose Lectin and Asialoglycoprotein Receptor

A range of glycopolymers composed of N-acetylgalactosamine were prepared via sequential Cu(I)-mediated polymerization and alkyne-azide click (CuAAC). The resulting polymers were shown, via multichannel surface plasmon resonance, to interact specifically with human macrophage galactose lectin (MGL; CD301) with high affinity (K_D = 1.11 μM), but they did not bind to the mannose/fucose-selective human lectin dendritic-cell-specific intercellular adhesion molecule-3-grabbing nonintegrin (DC-SIGN; CD209). The effect of sugar ligand valency on the binding (so-called "glycoside cluster effect") of poly(N-acetylgalactosamine) to MGL was investigated by varying first the polymer chain length (DP: 100, 64, 40, 23, 12) and then the architecture (4- and 8-arm star glycopolymers). The chain length did not have a significant effect on the binding to MGL (K_D = 0.17-0.52 μM); however, when compared to a hepatic C-type lectin of a similar monosaccharide specificity, the asialoglycoprotein receptor (ASGPR), the binding affinity was more noticeably affected (K_D = 0.37- 6.65 μM). These data suggest that known differences in the specific configuration/orientation of the carbohydrate recognition domains of MGL and ASGPR are responsible for the differences in binding observed between the different polymers of varied chain length and architecture. In the future, this model has the potential to be employed for the development of tissue-selective delivery systems.

Antiviral Agents from Multivalent Presentation of Sialyl Oligosaccharides on Brush Polymers

Bioinspired brush polymers containing α-2,6-linked sialic acids at the side chain termini were synthesized by protection-group-free, ring-opening metathesis polymerization. Polymers showed strain-selective antiviral activity through multivalent presentation of the sialosides. The multivalent effect was further controlled by independently varying the degree of polymerization, the number density of sialic acids, and the length of side chains in the brush polymers. Optimizing the three-dimensional sialoside spacing for better binding to hemagglutinin trimers was of critical importance to enhance the multivalent effect and the antiviral activity determined by hemagglutination inhibition assays and in vitro infection assays. By taking advantage of their structural similarities with native mucins, these brush polymers can be used as model systems to dissect the intricate design principles in natural mucins.

Polyacrylamide backbones for polyvalent bioconjugates using “post-click” chemistry

This paper reports the synthesis and application of acrylamide-type neoglycoconjugates interacting with practical targets.

Protecting-Group-Free Synthesis of Glycopolymers and Their Binding Assay with Lectin and Influenza Virus

Typical synthetic methods for glycopolymers are laborious and require multistep processes, including protection and deprotection steps. Here we describe a facile protecting-group-free synthetic approach to glycopolymers bearing oligosaccharides from free saccharides by direct azidation and click chemistry methods, followed by reversible addition-fragmentation chain transfer polymerization. This method can be applied not only to mono- and disaccharides, but also to large biologically relevant oligosaccharides having sialic acids. Due to the glycocluster effect, the glycopolymers strongly bind with the corresponding lectin and influenza A virus, as analyzed by the quartz crystal microbalance method and hemagglutination inhibition assay.

Carbohydrate-Specific Uptake of Fucosylated Polymeric Micelles by Different Cancer Cell Lines

Inspired by upregulated levels of fucosylated proteins on the surfaces of multiple types of cancer cells, micelles carrying β-l-fucose and β-d-glucose were prepared. A range of block copolymers were synthesized by reacting a mixture of 2-azidoethyl β-l-fucopyranoside (FucEtN3) and 2-azideoethyl β-d-glucopyranoside (GlcEtN3) with poly(propargyl methacrylate)-block-poly(n-butyl acrylate) (PPMA-b-PBA) using copper-catalyzed azide-alkyne cycloaddition (CuAAC). Five block copolymers were obtained ranging from 100 mol % fucose to 100% glucose functionalization. The resulting micelles had hydrodynamic diameters of around 30 nm. In this work, we show that fucosylated micelles reveal an increased uptake by pancreatic, lung, and ovarian carcinoma cell lines, whereas the uptake by the healthy cell lines (CHO) is negligible. This finding suggests that these micelles can be used for targeted drug delivery toward cancer cells.

Biocompatible polymer-Peptide hybrid-based DNA nanoparticles for gene delivery

Currently, research on polymers to be used as gene delivery systems is one of the most important directions in both polymer science and biomedicine. In this report, we describe a five-step procedure to synthesize a novel polymer-peptide hybrid system for gene transfection. The block copolymer based on the biocompatible polymer poly(2-methyl-2-oxazoline) (PMOXA) was combined with the biocleavable peptide block poly(aspartic acid) (PASP) and finally modified with diethylenetriamine (DET). PMOXA-b-PASP(DET) was produced in high yield and characterized by (1)H NMR and FT-IR. Our biopolymer complexed plasmid DNA (pDNA) efficiently, and highly uniform nanoparticles with a slightly negative zeta potential were produced. The polymer-peptide hybrid system was able to efficiently transfect HEK293 and HeLa cells with GFP pDNA in vitro. Unlike the commonly used polymer, 25 kDa branched poly(ethylenimine), our biopolymer had no adverse effects on cell growth and viability. In summary, the present work provides valuable information for the design of new polymer-peptide hybrid-based gene delivery systems with biocompatible and biodegradable properties.

Lignocellulosic biomass: a sustainable platform for the production of bio-based chemicals and polymers

The ongoing research activities in the field of lignocellulosic biomass for production of value-added chemicals and polymers that can be utilized to replace petroleum-based materials are reviewed.

Protecting-group-free one-pot synthesis of glycoconjugates directly from reducing sugars

The conversion of sugars into glycomimetics typically involves multiple protecting-group manipulations. The development of methodology allowing the direct aqueous conversion of free sugars into glycosides, and mimics of oligosaccharides and glycoconjugates in a high-yielding and stereoselective process is highly desirable. The combined use of 2-azido-1,3-dimethylimidazolinium hexafluorophosphate and the Cu-catalyzed Huisgen cycloaddition allowed the synthesis of a range of glycoconjugates in a one-step reaction directly from reducing sugars under aqueous conditions. The reaction, which is completely stereoselective, may be applied to the convergent synthesis of triazole-linked glycosides, oligosaccharides, and glycopeptides. The procedure provides a method for the one-pot aqueous ligation of oligosaccharides and peptides bearing alkyne side chains.

Synthesis and Aggregation of Double Hydrophilic Diblock Glycopolymers via Aqueous SET-LRP

A chemically unprotected mannose-containing acrylate (ManA) monomer was synthesized and polymerized by Cu(0)-mediated radical polymerization in water (SET-LRP). One-pot block copolymerization was achieved upon addition of a solution of N-isopropylacrylamide (NIPAm) or diethylene glycol ethyl ether acrylate (DEGEEA) forming thermoresponsive double hydrophilic diblock glycopolymers which revealed self-assembly properties in aqueous solution forming well-defined, sugar-decorated nanoparticles.

Glycopolymers with secondary binding motifs mimic glycan branching and display bacterial lectin selectivity in addition to affinity

Polymer architecture is exploited as an alternative to glycan synthesis to enhance selectivity towards pathogenic lectins.

Synthetic mimics of carbohydrate-based anticancer vaccines: preparation of carbohydrate polymers bearing unimolecular trivalent carbohydrate ligands by controlled living radical polymerization

Under the conditions of nitroxide-mediated polymerizations, novel carbohydrate polymers bearing unimolecular trivalent carbohydrate ligands could be achieved through a living radical process.

Synthesis of a Novel Polyaniline Glycopolymer and its Lectin Binding Studies

We report the multistep synthesis and polymerisation of a novel aniline derivative with a pendant α-d-mannose substituent. The α-D-mannose functionality was successfully introduced before polymerisation via copper-catalysed azide alkyne click chemistry and the resulting monomer was polymerised using general oxidative polymerisation conditions, producing a water soluble mannosylated polyaniline. The polymer was characterised by several techniques and compared with standard polyaniline. The selective binding of the polymer to Concanavalin A (ConA) was successfully demonstrated by the precipitation of polymer–ConA aggregates. Potential applications of these novel polyaniline glycopolymers could include the development of electroactive biomaterials with the ability to bind mannose receptors, or as sensors for proteins or microbes.

A Detailed Study on Understanding Glycopolymer Library and Con A Interactions

Synthetic glycopolymers are important natural oligosaccharides mimics for many biological applications. To develop glycopolymeric drugs and therapeutic agents, factors that control the receptor-ligand interaction need to be investigated. A library of well-defined glycopolymers has been prepared by the combination of copper mediated living radical polymerization and CuAAC click reaction via post-functionalization of alkyne-containing precursor polymers with different sugar azides. Employing Concanavalin A as the model receptor, we explored the influence of the nature and densities of different sugars residues (mannose, galactose, and glucose) on the stoichiometry of the cluster, the rate of the cluster formation, the inhibitory potency of the glycopolymers, and the stability of the turbidity through quantitative precipitation assays, turbidimetry assays, inhibitory potency assays, and reversal aggregation assays. The diversities of binding properties contributed by different clustering parameters will make it possible to define the structures of the multivalent ligands and densities of binding epitopes tailor-made for specific functions in the lectin-ligand interaction. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2588-2597.

Sweet block copolymer nanoparticles: preparation and self-assembly of fully oligosaccharide-based amphiphile

The preparation of biocompatible nanocarriers that have potential applications in the cosmetic and health industries is highly desired. The self-assembly of amphiphilic block copolymers displaying biosourced polysaccharides at the surface is one of the most promising approaches. In the continuity of our works related to the preparation of "hybrid" amphiphilic oligosaccharide-based block copolymers, we present here the design of a new generation of self-assembled nanoparticles composed entirely of oligosaccharide-based amphiphilic block co-oligomers (BCO). These systems are defined by a covalent linkage of the two saccharidic blocks through their reducing end units, resulting in a sweet "head-to-head" connection. As an example, we have prepared and studied a BCO in which the hydrophilic part is composed of a free maltoheptaosyl derivative clicked to a hydrophobic part composed of a peracetylated maltoheptaosyl derivative. This amphiphilic BCO self-assembles to form spherical micelles in water with an average diameter of 30 nm. The efficient enzymatic hydrolysis of the maltoheptaose that constitutes the shell of the micelles was followed by light scattering and colorimetric methods.

Controlled Alternate Layer-by-Layer Assembly of Lectins and Glycopolymers Using QCM-D

Layer-by-layer (LBL) assembly of concanavalin A (Con A), peanut agglutinin (PNA) plant lectins, and well-defined synthetic glycopolymers via their biological affinities have been prepared using a quartz crystal microbalance with dissipation monitoring (QCM-D). We demonstrate the use of mannose/galactose glycopolymers as lectin binders due to their selective binding to Con A/PNA, respectively. A detailed analysis of the adsorption processes and the adsorbed layer are provided and tuning the composition of multilayers using a series of well-defined glycopolymers differing only in the pendant sugar ratio is discussed.