Electrochemical detection of selected heavy metals in water: a case study of African experiences

The safety of water resources throughout the globe has been compromised by various human activities and climate change over the last decades.

The amino - functionalized magnetic graphene oxide combined with graphite furnace atomic absorption spectrometry for determination of trace inorganic arsenic species in water samples

A novel adsorbent of magnetic graphene oxide (GO) chemically modified by cysteamine hydrochloride (Fe₃O₄@SiO₂/GO-NH₂) through thiol-ene click chemistry reaction was synthesized. The prepared Fe₃O₄@SiO₂/GO-NH₂ exhibit selective adsorption to As(V) with high adsorption capacity (52.66 mg g^-1). Taking Fe₃O₄@SiO₂/GO-NH₂ as the adsorbents, a new method of magnetic solid phase extraction (MSPE) combined with graphite furnace atomic absorption spectrometry (GFAAS) was developed in determining trace-level inorganic arsenic species (As(III) and As(V)) in environmental water and bottled water samples. Various experimental parameters affecting the MSPE have been optimized. Under the optimal experimental parameters, the limit of detection of the established method for As(V) was 1.02 ng L^-1, the relative standard deviations were 7.9% (intra-day, c = 50 ng L^-1, n = 5) and 4.6% (inter-day, c = 50 ng L^-1, n = 7), respectively, and the enrichment factor of the method was 392. GBW08666 and GBW08667 (certified reference material) were analyzed to confirm the accuracy of the method, and the results were matched well with the certified values. The established MSPE-GFAAS method was successfully applied in analyzing trace/ultratrace As(III) and As(V) in real water samples.

Gold/SH-functionalized nanographene oxide/polyamidamine/poly(ethylene glycol) nanocomposites for enhanced non-enzymatic hydrogen peroxide detection

Hydrogen peroxide (H₂O₂) is an important mediator in biological medicine, disease diagnosis and environmental analyses and therefore it is essential to develop a detection approach for H₂O₂ in physical environments. Herein, we designed and prepared a series of AuNP-containing nanocomposites (AuNPs@NGO-PEG, AuNPs@G1-PAMAM-NGO-PEG and AuNPs@G3-PAMAM-NGO-PEG) for enhanced non-enzymatic H₂O₂ detection. We firstly demonstrated functionalized nanographene oxide (NGO) based materials, which combined advantages of biocompatible poly(ethylene glycol) (PEG), hyperbranched polyamidamine (PAMAM) dendrimer and thiol active site, as compatible platforms. Gold nanoparticles (AuNPs) were then aptly in situ grown on these functionalized NGO based materials via the reduction of HAuCl₄ under mild conditions, i.e. AuNPs@NGO-PEG, AuNPs@G1-PAMAM-NGO-PEG and AuNPs@G3-PAMAM-NGO-PEG nanocomposites, which possess stable and uniform AuNPs standing on the functionalized NGO sheets. For H₂O₂ detection, these nanocomposites were cast on a glassy carbon electrode (GCE) conveniently, i.e. GCE/AuNPs@NGO-PEG, GCE/AuNPs@G1-PAMAM-NGO-PEG and GCE/AuNPs@G3-PAMAM-NGO-PEG. It is evident that these GCEs could be applied as efficient non-enzymatic H₂O₂ detectors resulting from the corresponding cyclic voltammetric curves and typical ready-state amperometric curves. GCE/AuNPs@G1-PAMAM-NGO-PEG exhibited the fastest electron transfer rate among these modified GCEs. We envisage that these GCEs could provide efficient sensors for H₂O₂ detection and a new strategy for sensor design.

Gold nanoparticles standing on PEG/PAMAM/thiol-functionalized nanographene oxide as aqueous catalysts

Gold nanoparticles were aptly in situ grown on PEG/PAMAM/thiol-functionalized nanographene oxide platforms for aqueous catalysis.

A facile PEG/thiol-functionalized nanographene oxide carrier with an appropriate glutathione-responsive switch

A novel nanographene oxide/PEG-based bioreduction-responsive smart drug delivery system with a GSH-responsive disulfide linker as the controlled release switch can selectively release anti-cancer drugs in cancer cells.

Functionalized Carbon Materials for Electronic Devices: A Review

Carbon-based materials, including graphene, single walled carbon nanotubes (SWCNTs), and multi walled carbon nanotubes (MWCNTs), are very promising materials for developing future-generation electronic devices. Their efficient physical, chemical, and electrical properties, such as high conductivity, efficient thermal and electrochemical stability, and high specific surface area, enable them to fulfill the requirements of modern electronic industries. In this review article, we discuss the synthetic methods of different functionalized carbon materials based on graphene oxide (GO), SWCNTs, MWCNTs, carbon fibers (CFs), and activated carbon (AC). Furthermore, we highlight the recent developments and applications of functionalized carbon materials in energy storage devices (supercapacitors), inkjet printing appliances, self-powered automatic sensing devices (biosensors, gas sensors, pressure sensors), and stretchable/flexible wearable electronic devices.

Graphene-derived nanomaterials as recognition elements for electrochemical determination of heavy metal ions: a review

This review (with 155 refs.) summarizes the progress made in the past few years in the field of electrochemical sensors based on graphene-derived materials for the determination of heavy metal ions. Following an introduction of this field and a discussion of the various kinds of modified graphenes including graphene oxide and reduced graphene oxide, the review covers graphene based electrodes modified (or doped) with (a) heteroatoms, (b) metal nanoparticles, (c) metal oxides, (d) small organic molecules, (e) polymers, and (f) ternary nanocomposites. Tables are provided that afford an overview of representative methods and materials for fabricating electrochemical sensors. Furthermore, sensing mechanisms are discussed. A concluding section presents new perspectives, opportunities and current challenges. Graphical Abstract Schematic illustration of electrochemical sensor for heavy metal ion sensing based on heteroatom-doped graphene, metal-modified graphene, metal-oxide-modified graphene, organically modified graphene, polymer-modified graphene, and ternary graphene based nanocomposites.

Novel carbon nanotube (CNT)-based ultrasensitive sensors for trace mercury(II) detection in water: A review

Infamous for "Mad hatter syndrome" and "Minamata disease", mercury (Hg) is ranked high on the Agency for Toxic Substances and Disease Registry's priority list of hazardous substances for its potent neurologic, renal, and developmental toxicities. Most typical exposures are via contaminated water and food. Although regulations and advisories are exercised at various levels, Hg pollution from both natural and anthropogenic sources has remained a major public health and safety concern. Rapid detection of solvated aqueous Hg²⁺ ions at low levels is critical for immediate response and protection of those who are vulnerable (young children, pregnant and breast-feeding women) to acute and chronic exposures to Hg²⁺. Various types of sensors capable of detecting Hg in water have been developed. In particular, the novel use of engineered carbon nanotubes (CNTs) has garnered attention due to their specificity and sensitivity towards Hg²⁺ detection in solution. In this focused review, we describe the sensitivity, selectivity and mechanisms of Hg²⁺ ion sensing at trace levels by employing CNT-based various sensor designs, and appraise the open literature on the currently applied and "proof-of-concept" methods. Five different types of CNT-based sensor systems are described: potentiometric, DNA-based fluorescence, surface plasmon resonance (SPR), colorimetric, and stripping voltammetric assays. In addition, the recognized merits and shortcomings for each type of electrochemical sensors are discussed. The knowledge from this succinct review shall guide the development of the next generation CNT-based biochemical sensors for rapid Hg²⁺ detection in the environment, which is a significant first step towards human health risk analysis of this legacy toxicant.

Silver nanowires decorated with silver nanoparticles for low-haze flexible transparent conductive films

Silver nanowires have attracted much attention for use in flexible transparent conductive films (TCFs) due to their low sheet resistance and flexibility. However, the haze was too high for replacing indium-tin-oxide in high-quality display devices. Herein, we report flexible TCFs, which were prepared using a scalable bar-coating method, with a low sheet resistance (24.1 Ω/sq at 96.4% transmittance) and a haze (1.04%) that is comparable to that of indium-tin-oxide TCFs. To decrease the haze and maintain a low sheet resistance, small diameter silver nanowires (~20 nm) were functionalized with low-temperature surface-sintering silver nanoparticles (~5 nm) using bifunctional cysteamine. The silver nanowire-nanoparticle ink stability was excellent. The sheet resistance of the TCFs was decreased by 29.5% (from 34.2 to 24.1 Ω/sq) due to the functionalization at a low curing temperature of 85 °C. The TCFs were highly flexible and maintained their stability for more than 2 months and 10,000 bending cycles after coating with a protective layer.

Cleavage-based hybridization chain reaction for electrochemical detection of thrombin

In the present work, we constructed a new label-free "inter-sandwich" electrochemical aptasensor for thrombin (TB) detection by employing a cleavage-based hybridization chain reaction (HCR). The designed single-stranded DNA (defined as binding DNA), which contained the thrombin aptamer binding sequence, a DNAzyme cleavage site and a signal reporter sequence, was first immobilized on the electrode. In the absence of a target TB, the designed DNAzymes could combine with the thrombin aptamer binding sequence via complementary base pairing, and then Cu(2+) could cleave the binding DNA. In the presence of a target TB, TB could combine with the thrombin aptamer binding sequence to predominantly form an aptamer-protein complex, which blocked the DNAzyme cleavage site and prevented the binding DNA from being cleaved by Cu(2+)-dependent DNAzyme. As a result, the signal reporter sequence could leave the electrode surface to trigger HCR with the help of two auxiliary DNA single-strands, A1 and A2. Then, the electron mediator hexaammineruthenium (III) chloride ([Ru(NH3)6](3+)) was embedded into the double-stranded DNA (dsDNA) to produce a strong electrochemical signal for the quantitative measurement of TB. For further amplification of the electrochemical signal, graphene reduced by dopamine (PDA-rGO) was introduced as a platform in this work. With this strategy, the aptasensor displayed a wide linearity in the range of 0.0001 nM to 50 nM with a low detection limit of 0.05 pM. Moreover, the resulting aptasensor exhibited good specificity and acceptable reproducibility and stability. Because of these factors, the fabrication protocol proposed in this work may be extended to clinical application.

Highly Sensitive Detection and Removal of Lead Ions in Water Using Cysteine-Functionalized Graphene Oxide/Polypyrrole Nanocomposite Film Electrode

We synthesized cysteine-functionalized graphene oxide (sGO) using carbonyldiimidazole as a cross-linker via amide and carbamate linkages. The sGO/polypyrrole (PPy) nanocomposite film was grown on the working electrode surface of a screen-printed electrode (SPE) via controlled one-step electrochemical deposition. The sGO/PPy-SPE was used to detect lead ions (Pb(2+)) in water by first depositing Pb(2+) on the working electrode surface for 10 min at -1.2 V, and then anodic stripping by differential pulse voltammetry (DPV). The DPV signals were linear in the ranges of 1.4-28 ppb (R(2) = 0.994), 28-280 ppb (R(2) = 0.997), and 280-14 000 ppb (R(2) = 0.990) Pb(2+). The measurable detection limit of the sensor is 0.07 ppb (S/N = 3), which is more than 2 orders of magnitude below the 10 ppb threshold for drinking water set by the World Health Organization. The average removal efficiency of Pb(2+) deposited on the electrode was 99.2% (S/N = 3), with relative standard deviation (RSD) of 3.8%. Our results indicate good affinity of sGO/PPy nanocomposite to Pb(2+), which can be used to effectively adsorb and remove Pb(2+) in water samples. Therefore, sGO/PPy nanocomposite we synthesized is useful for highly sensitive on-site and real-time monitoring of heavy metal ions and water treatment.

Toward selective, sensitive, and discriminative detection of Hg2+ and Cd2+via pH-modulated surface chemistry of glutathione-capped gold nanoclusters

Heavy metal pollution can exert severe effects on the environment and human health.

Amperometric sensing of urea using edge activated graphene nanoplatelets

In this study, we demonstrate efficient amperometric sensing of urea using graphene nanoplatelets.

Graphene oxide-based electrochemical sensor: a platform for ultrasensitive detection of heavy metal ions

Facile functionalization of graphene oxide sheets on gold surface results in complexation-enhanced electrochemical detection of heavy metal ions, shown here for Pb²⁺, Cu²⁺ and Hg²⁺, with improved detection limits by two orders of magnitude relative to the control electrode.

Facile synthesis of nickel hydroxide–graphene nanocomposites for insulin detection with enhanced electro-oxidation properties

This study describes a facile and effective one-pot route to synthesize structurally uniform and electrochemically active nickel hydroxide–graphene nanocomposites (Ni(OH)₂–GN) and investigates the electrocatalytic activity toward the oxidation of insulin.