Comparative Passivation of Si(100) by H2 and D2 Atmospheres under Simultaneous Xe+ Bombardment: An X-ray Photoelectron Spectroscopy Analysis

This study presents a comparison of H2 and D2 passivation on Si(100) under simultaneous Xe+ ion bombardment. The impact of Xe+ ions causes significant damage to the substrate surface, leading to an increase in H2 (D2) retention as Si-H (Si-D) bonds. The ion bombardment conditions are precisely controlled using a Kaufman ion gun. The atomic concentrations on the surface of the sample were investigated by quasi-in situ X-ray photoelectron spectroscopy. A simple methodology is employed to estimate the H (D) chemical concentration and the cover ratio of the sample, with regard to the oxygen concentration through residual water chemisorption present in the vacuum vessel. Differences in passivation are expected when using H2 or D2 atmospheres because their retained scission energies and physisorption properties differ. The results indicate an increase of the sticking coefficient for D2 and H2 under the ion bombardment. It is also found that the flux of H2 (D2) impinging on the surface contributes to play an important role in the whole process. Finally, a model is proposed to describe the phenomenon of the passivation of Si under Xe+ ion bombardment in the presence of H2 (D2).

Progress and Advances in Porous Silica-based Scaffolds for Enhanced Solid-state Hydrogen Storage: A Systematic Literature Review

Hydrogen plays a crucial role in the future energy landscape owing to its high energy density. However, finding an ideal storage material is the key challenge to the success of the hydrogen economy. Various solid-state hydrogen storage materials, such as metal hydrides, have been developed to realize safe, effective, and compact hydrogen storage. However, low kinetics and thermodynamic stability lead to a high working temperature and a low hydrogen sorption rate of the metal hydrides. Using scaffolds made from porous materials like silica to confine the metal hydrides is necessary for better and improved hydrogen storage. Therefore, this article reviews porous silica-based scaffolds as an ideal material for improved hydrogen storage. The outcome showed that confining the metal hydrides using scaffolds based on porous silica significantly increases their storage capacities. It was also found that the structural modifications of the silica-based scaffold into a hollow structure further improved the storage capacity and increased the affinity and confinement ability of the metal hydrides, which prevents the agglomeration of metal particles during the adsorption/desorption process. Hence, the structural modifications of the silica material into a fibrous and hollow material are recommended to be crucial for further enhancing the metal hydride storage capacity.

Water-assisted hydrogen spillover in Pt nanoparticle-based metal-organic framework composites

Hydrogen spillover is the migration of activated hydrogen atoms from a metal particle onto the surface of catalyst support, which has made significant progress in heterogeneous catalysis. The phenomenon has been well researched on oxide supports, yet its occurrence, detection method and mechanism on non-oxide supports such as metal-organic frameworks (MOFs) remain controversial. Herein, we develop a facile strategy for efficiency enhancement of hydrogen spillover on various MOFs with the aid of water molecules. By encapsulating platinum (Pt) nanoparticles in MOF-801 for activating hydrogen and hydrogenation of C=C in the MOF ligand as activated hydrogen detector, a research platform is built with Pt@MOF-801 to measure the hydrogenation region for quantifying the efficiency and spatial extent of hydrogen spillover. A water-assisted hydrogen spillover path is found with lower migration energy barrier than the traditional spillover path via ligand. The synergy of the two paths explains a significant boost of hydrogen spillover in MOF-801 from imperceptible existence to spanning at least 100-nm-diameter region. Moreover, such strategy shows universality in different MOF and covalent organic framework materials for efficiency promotion of hydrogen spillover and improvement of catalytic activity and antitoxicity, opening up new horizons for catalyst design in porous crystalline materials.

Hydrogen spillover effects in the Fischer–Tropsch reaction over carbon nanotube supported cobalt catalysts

Support (CNTs) surface defect-induced hydrogen spillover significantly impacted the catalytic activity (turnover frequency, TOF) and methane selectivity evolution in cobalt-based Fischer–Tropsch synthesis.

Insights on hydrogen spillover on carbonaceous supports

Hydrogen spillover is important in solid-phase catalytic hydrogenation reactions, as well as in hydrogen storage and scavenging. The present study explores the nature of this phenomenon by examining the effects of hydrogen pressure and addition of carbonaceous additives, such as carbon nanotubes (CNT) and C₆₀ fullerene, on hydrogenation reaction kinetics and its products distribution. For these purposes, a solid-phase hydrogenation reaction was studied, where 1,4-bis-(phenyl-ethynyl)benzene (PEB) was used as a hydrogen acceptor. To the best of our knowledge, this is the first study in which both the reaction kinetics and products distribution of the solid-phase organic hydrogen acceptor were analyzed. A demonstration of hydrogen spillover phenomenon was provided on the basis of the combined interpretation of kinetics and hydrogenated organic products distribution, under different reaction conditions. The results were explained in terms of hydrogen active species availability, distribution and relative migration distance of these species through the carbonaceous media. The insights into the hydrogen spillover chemistry obtained in this research allow for a better understanding of this phenomenon and its implementation in the future hydrogen storage and transportation, and hydrogen-generating devices, including safety aspects of all these applications.

Hydrogen Spillover-Enhanced Heterogeneously Catalyzed Hydrodeoxygenation for Biomass Upgrading

Hydrodeoxygenation (HDO) is regarded as a promising technology for biomass upgrading to obtain sustainable and competitive chemicals and fuels. In fact, biomass HDO over heterogeneous solid catalysts is often accompanied by the phenomenon of hydrogen spillover, which further affects the catalytic performance. Thus, it is necessary to gain in-depth understand the promoting effect of hydrogen spillover in the biomass HDO process to obtain desired conversion and selectivity. This Review summarized the extensive research on hydrogen spillover in biomass refining and discussed in detail the regulation mechanism of hydrogen spillover in biomass HDO process, mainly by regulating different active center sites on catalyst supports, such as metal sites, acid sites, surface functional groups, and defective sites, which exhibit independent and synergistic characteristics promoting catalyst activity, selectivity, and stability. Finally, the prospective of hydrogen spillover in biomass HDO applications was critically evaluated, and the key technical challenges in developing "hydrogen-free" HDO and upgrading biofuels were highlighted. The presentation of hydrogen spillover-enhanced catalytic biomass HDO in this Review will hopefully provide insight and guidance for further development of efficient catalysts and preparation of high-value chemicals in the future.

Palladium Nanoparticles Hardwired in Carbon Nanoreactors Enable Continually Increasing Electrocatalytic Activity During the Hydrogen Evolution Reaction

Catalysts typically lose effectiveness during operation, with much effort invested in stabilising active metal centres to prolong their functional lifetime for as long as possible. In this study palladium nanoparticles (PdNP) supported inside hollow graphitised carbon nanofibers (GNF), designated as PdNP@GNF, opposed this trend. PdNP@GNF exhibited continuously increasing activity over 30000 reaction cycles when used as an electrocatalyst in the hydrogen evolution reaction (HER). The activity of PdNP@GNF, expressed as the exchange current density, was always higher than activated carbon (Pd/C), and after 10000 cycles PdNP@GNF surpassed the activity of platinum on carbon (Pt/C). The extraordinary durability and self-improving behaviour of PdNP@GNF was solely related the unique nature of the location of the palladium nanoparticles, that is, at the graphitic step-edges within the GNF. Transmission electron microscopy imaging combined with spectroscopic analysis revealed an orchestrated series of reactions occurring at the graphitic step-edges during electrocatalytic cycling, in which some of the curved graphitic surfaces opened up to form a stack of graphene layers bonding directly with Pd atoms through Pd-C bonds. This resulted in the active metal centres becoming effectively hardwired into the electrically conducting nanoreactors (GNF), enabling facile charge transport to/from the catalytic centres resulting in the dramatic self-improving characteristics of the electrocatalyst.

Electrochemical Storage of Atomic Hydrogen on Single Layer Graphene

If hydrogen can be stored and carried safely at a high density, hydrogen-fuel cells offer effective solutions for vehicles. The stable chemisorption of atomic hydrogen on single layer graphene (SLG) seems a perfect solution in this regard, with a theoretical maximum storage capacity of 7.7 wt %. However, generating hydrogenated graphene from H₂ requires extreme temperatures and pressures. Alternatively, hydrogen adatoms can easily be produced under mild conditions by the electroreduction of protons in solid/liquid systems. Graphene is electrochemically inert for this reaction, but H-chemisorption on SLG can be carried out under mild conditions via a novel Pt-electrocatalyzed "spillover-surface diffusion-chemisorption" mechanism, as we demonstrate using dynamic electrochemistry and isotopic Raman spectroscopy. The apparent surface diffusion coefficient (∼10^-5 cm² s^-1), capacity (∼6.6 wt %, ∼85.7% surface coverage), and stability of hydrogen adatoms on SLG at room temperature and atmospheric pressure are significant, and they are perfectly suited for applications involving stored hydrogen atoms on graphene.

Synopsis of Factors Affecting Hydrogen Storage in Biomass-Derived Activated Carbons

Hydrogen (H2) is largely regarded as a potential cost-efficient clean fuel primarily due to its beneficial properties, such as its high energy content and sustainability. With the rising demand for H2 in the past decades and its favorable characteristics as an energy carrier, the escalating USA consumption of pure H2 can be projected to reach 63 million tons by 2050. Despite the tremendous potential of H2 generation and its widespread application, transportation and storage of H2 have remained the major challenges of a sustainable H2 economy. Various efforts have been undertaken by storing H2 in activated carbons, metal organic frameworks (MOFs), covalent organic frameworks (COFs), etc. Recently, the literature has been stressing the need to develop biomass-based activated carbons as an effective H2 storage material, as these are inexpensive adsorbents with tunable chemical, mechanical, and morphological properties. This article reviews the current research trends and perspectives on the role of various properties of biomass-based activated carbons on its H2 uptake capacity. The critical aspects of the governing factors of H2 storage, namely, the surface morphology (specific surface area, pore volume, and pore size distribution), surface functionality (heteroatom and functional groups), physical condition of H2 storage (temperature and pressure), and thermodynamic properties (heat of adsorption and desorption), are discussed. A comprehensive survey of the literature showed that an “ideal” biomass-based activated carbon sorbent with a micropore size typically below 10 Å, micropore volume greater than 1.5 cm3/g, and high surface area of 4000 m2/g or more may help in substantial gravimetric H2 uptake of >10 wt% at cryogenic conditions (−196 °C), as smaller pores benefit by stronger physisorption due to the high heat of adsorption.

In situ anodic dissolution–cathodic deposition route for preparation of the Pt–SiW11Co/SiW11Co–CNP/GC electrode: application as an efficient electrode for the hydrogen evolution reaction

A novel nanohybrid based on carbon nanoparticles, platinum nanoparticles, and SiW₁₁Co polyoxometalate is introduced as an efficient electrocatalyst for the hydrogen evolution reaction (HER).

Thermal Modification Effect on Supported Cu-Based Activated Carbon Catalyst in Hydrogenolysis of Glycerol

Glycerol hydrogenolysis to 1,2-propanediol (1,2-PDO) was performed over activated carbon supported copper-based catalysts. The catalysts were prepared by impregnation using a pristine carbon support and thermally-treated carbon supports (450, 600, 750, and 1000 °C). The final hydrogen adsorption capacity, porous structure, and total acidity of the catalysts were found to be important descriptors to understand catalytic performance. Oxygen surface groups on the support controlled copper dispersion by modifying acidic and adsorption properties. The amount of oxygen species of thermally modified carbon supports was also found to be a function of its specific surface area. Carbon supports with high specific surface areas contained large amount of oxygen surface species, inducing homogeneous distribution of Cu species on the carbon support during impregnation. The oxygen surface groups likely acted as anchorage centers, whereby the more stable oxygen surface groups after the reduction treatment produced an increase in the interaction of the copper species with the carbon support, and determined catalytic performances.

Toward Green Production of Chewing Gum and Diet: Complete Hydrogenation of Xylose to Xylitol over Ruthenium Composite Catalysts under Mild Conditions

Xylitol is one of the most famous chemicals known to people as the essential ingredient of chewing gum and as the sugar alternative for diabetics. Catalytic hydrogenation of biomass-derived xylose with H₂ to produce high-value xylitol has been carried out under harsh reaction conditions. Herein, we exhibit the combination of Ru NPs with an environmentally benign MOF (ZIF-67) to afford a heterogeneous composite catalyst. Complete conversion of xylose with 100% selectivity to xylitol was achieved at 50°C and 1 atm H₂. This is the first successful attempt to produce xylitol with ambient pressure H₂ as well as the first time to achieve a 100% selectivity of xylitol for applicable catalysts. We also proved the universality of the Ru@ZIF-67 towards other hydrogenation processes. Under 1 atm H₂, we achieved 100% conversion and >99% selectivity of 1-phenylethanol at 50°C for the hydrogenation of acetophenone. This is also the first report of hydrogenating acetophenone to 1-phenylethanol under 1 atm H₂, which confirms that our result not only contributes to enhance the industrial yields of xylitol and reduces both the economical and energy costs but also provides new perspectives on the other hydrogenation process with H₂.

Hydrogen spillover through Matryoshka-type (ZIFs@)n-1ZIFs nanocubes

Hydrogen spillover phenomenon is well-documented in hydrogenation catalysis but still highly disputed in hydrogen storage. Until now, the existence of hydrogen spillover through metal–organic frameworks (MOFs) remains a topic of ongoing debate and how far the split hydrogen atoms diffuse in such materials is unknown. Herein we provide experimental evidence of the occurrence of hydrogen spillover in microporous MOFs at elevated temperatures, and the penetration depths of atomic hydrogen were measured quantitatively. We have made Matryoshka-type (ZIFs@)_n−1ZIFs (where ZIFs = ZIF-8 or ZIF-67) nanocubes, together with Pt nanoparticles loaded on their external surfaces to produce atomic hydrogen. Within the (ZIFs@)_n−1ZIFs, the ZIF-8 shell served as a ruler to measure the travelling distance of H atoms while the ZIF-67 core as a terminator of H atoms. In addition to the hydrogenolysis at normal pressure, CO₂ hydrogenation can also trace the migration of H atoms over the ZIF-8 at high pressure.

Hydrogen spillover is well-documented in hydrogenation catalysis, but its existence through metalorganic frameworks (MOFs) remains controversial. Here, the authors provide evidence of the occurrence of hydrogen spillover in microporous MOFs at elevated temperatures, and measure quantitatively the penetration depths of atomic hydrogen.

Microscopic Evidence for Strong Interaction between Pd and Graphene Oxide that Results in Metal-Decoration-Induced Reduction of Graphene Oxide

Graphene oxide (GO) is reduced spontaneously when palladium nanoparticles are decorated on the surface. The oxygen functional groups at the GO surface near the nanoparticles are absorbed to the palladium to produce a palladium oxide interlayer. Palladium therefore grows on the GO with preferred orientations, resulting in unique microstructural and electrical properties.

First-principles prediction of a new planar hydrocarbon material: half-hydrogenated 14,14,14-graphyne

A new strictly planar semiconducting hydrocarbon, formed by hydrogenating half of the sp-hybridized carbon atoms in 14,14,14-graphyne, is predicted.

Activated carbon derived from waste coffee grounds for stable methane storage

An activated carbon material derived from waste coffee grounds is shown to be an effective and stable medium for methane storage. The sample activated at 900 °C displays a surface area of 1040.3 m(2) g(-1) and a micropore volume of 0.574 cm(3) g(-1) and exhibits a stable CH4 adsorption capacity of ∼4.2 mmol g(-1) at 3.0 MPa and a temperature range of 298 ± 10 K. The same material exhibits an impressive hydrogen storage capacity of 1.75 wt% as well at 77 K and 100 kPa. Here, we also propose a mechanism for the formation of activated carbon from spent coffee grounds. At low temperatures, the material has two distinct types with low and high surface areas; however, activation at elevated temperatures drives off the low surface area carbon, leaving behind the porous high surface area activated carbon.

Nanoalloying bulk-immiscible iridium and palladium inhibits hydride formation and promotes catalytic performances

The hydrogen sorption properties of oxide-supported Ir-Pd nanoalloys have been determined for the first time, and correlated with their catalytic behavior. The addition of Ir to Pd suppresses hydride formation and leads to improved catalytic performances with respect to pure metals in the preferential oxidation of CO in H2 excess (PROX).

Water-mediated cooperative migration of chemisorbed hydrogen on graphene

The kinetics associated with the migration of chemisorbed hydrogen on a graphene sheet is studied using density-functional theory. Chemisorbed H atoms interact strongly through the carbon sheet and each chemisorbed H atom must form a pair with a H atom bound on the opposite side of the sheet in order to lower the energy with respect to the free H2 state. The two H atoms in a pair are correlated and migrate cooperatively. Because of the strong C-H bonds, the barrier to H cooperative migration is higher than 2.0 eV. However, when mediated by H2O molecules, the barrier can be reduced to less than 0.8 eV. The H pairing up leads to distinctive behavior of graphene hydrogenation, different from H chemisorption on a graphite surface. This study also demonstrates the superior effectiveness of water activation of C-H bonds and uncovers the mystery of fast kinetics of H spillover [Y. W. Li and R. T. Yang, J. Am. Chem. Soc. 128, 8136 (2006).

Equiatomic ternary chalcogenide: PdPS and its reduced graphene oxide composite for efficient electrocatalytic hydrogen evolution

The PdPS–rGO composite is an excellent catalyst for HER.

Insights into H2 formation in space from ab initio molecular dynamics

Hydrogen formation is a key process for the physics and the chemistry of interstellar clouds. Molecular hydrogen is believed to form on the carbonaceous surface of dust grains, and several mechanisms have been invoked to explain its abundance in different regions of space, from cold interstellar clouds to warm photon-dominated regions. Here, we investigate direct (Eley-Rideal) recombination including lattice dynamics, surface corrugation, and competing H-dimers formation by means of ab initio molecular dynamics. We find that Eley-Rideal reaction dominates at energies relevant for the interstellar medium and alone may explain observations if the possibility of facile sticking at special sites (edges, point defects, etc.) on the surface of the dust grains is taken into account.

Hydrogen spillover mechanism on covalent organic frameworks as investigated by ab initio density functional calculation

The hydrogen spillover mechanism, including the H chemisorption, diffusion, and H(2) associative desorption on the surface of COFs and H atoms migration from metal catalyst to COFs, have been studied via density functional theory (DFT) calculation. The results described herein show that each sp(2) C atom on COFs' surface can adsorb one H atom with the bond length d(C-H) between 1.11 and 1.14 Å, and the up-down arrangement of the adsorbed H atoms is the most stable configuration. By counting the chemisorption binding sites for these COFs, we can predict the saturation storage densities. High hydrogen storage densities show that the gravimetric uptakes of COFs are in the range of 5.13-6.06 wt%. The CI-NEB calculations reveal that one H atom diffusing along the C-C path on HHTP surface should overcome the 1.41-2.16 eV energy barrier. We chose tetrahedral Pt(4) cluster and HHTP as the representative catalyst and substrate, respectively, to study the H migration from metal cluster to COFs. At most, two H atoms can migrate from Pt(4) cluster to HHTP substrate. The migration reaction is an endothermic process, undergoing an activation barrier of 1.87 eV and 0.57 eV for the first and second H migration process, respectively. Three types of H(2) associative desorption from hydrogenated COFs were studied: (I) the two H adatoms recombining to one H(2) molecule with a recombination barrier of 4.28 eV, (II) the abstraction of adsorbed H atoms by gas-phase hydrogen atoms through ER type recombination reactions with a recombination barrier of 1.05 eV, (III) the H(2) desorption through the reverse spillover mechanism with an energy barrier of 2.90 eV.

Progress on first-principles-based materials design for hydrogen storage

This article briefly summarizes the research activities in the field of hydrogen storage in sorbent materials and reports our recent works and future directions for the design of such materials. Distinct features of sorption-based hydrogen storage methods are described compared with metal hydrides and complex chemical hydrides. We classify the studies of hydrogen sorbent materials in terms of two key technical issues: (i) constructing stable framework structures with high porosity, and (ii) increasing the binding affinity of hydrogen molecules to surfaces beyond the usual van der Waals interaction. The recent development of reticular chemistry is summarized as a means for addressing the first issue. Theoretical studies focus mainly on the second issue and can be grouped into three classes according to the underlying interaction mechanism: electrostatic interactions based on alkaline cations, Kubas interactions with open transition metals, and orbital interactions involving Ca and other nontransitional metals. Hierarchical computational methods to enable the theoretical predictions are explained, from ab initio studies to molecular dynamics simulations using force field parameters. We also discuss the actual delivery amount of stored hydrogen, which depends on the charging and discharging conditions. The usefulness and practical significance of the hydrogen spillover mechanism in increasing the storage capacity are presented as well.