Thioflavin T forms a non-fluorescent complex with α-helical poly-L-glutamic acid

Metal Ion-Induced Unusual Stability of the Metastable Vesicle-like Intermediates Evolving during the Self-Assembly of Phenylalanine: Prominent Role of Surface Charge Inversion

The underlying mechanism and intermediate formation in the self-assembly of aromatic amino acids, peptides, and proteins remain elusive despite numerous reports. We, for the first time, report that one can stabilize the intermediates by tuning the metal ion-amino acid interaction. Microscopic and spectroscopic investigations of the self-assembly of carboxybenzyl (Z)-protected phenylalanine (ZF) reveal that the bivalent metal ions eventually lead to the formation of fibrillar networks similar to blank ZF whereas the trivalent ions develop vesicle-like intermediates that do not undergo fibrillation for a prolonged time. The time-lapse measurement of surface charge reveals that the surface charge of blank ZF and in the presence of bivalent metal ions changes from a negative value to zero, implying unstable intermediates leading to the fibril network. Strikingly, a prominent charge inversion from an initial negative value to a positive value in the presence of trivalent metal ions imparts unusual stability to the metastable intermediates.

Light-activated, dual-mode fluorescence and colorimetric detection of estradiol with high fidelity based on aptamer's special recognition

The intake of estradiol residue from food will lead to health problems, so the rapid and reliable detection of estradiol residue is essential. Multi-mode assays are inherently self-correcting and self-validating, providing more reliable, interference-resistant, high-fidelity results. Here, we developed a dual-mode method to achieve a rapid, reliable, and sensitive detection of estradiol. The binding of thioflavin T to the cavity sites of estradiol aptamer not only generates a strong fluorescence signal, but also provides light-activated oxidase activity to produce a blue oxidation product. But the specific binding between aptamer and estradiol will compete with the above process. Thus a dual-mode fluorescence and colorimetric detection of estradiol was realized with a detection limit of 0.15 μM or 0.27 μM. Besides, the dual-mode method showed a good selectivity for estradiol detection. The method could detect estradiol in meat food, showing a good application potential to monitor endocrine-disrupting chemical.

Photocatalytic Aptamer Chemiluminescent System for a Homogeneous, Reliable, Label-Free, Generic Assay of Small Molecules

Chemiluminescence is a powerful analytical technique with many advantages, while aptamers are well-known as good molecular recognition units. However, many aptamer-based chemiluminescence assays employed interface sensing, which often needed several immobilization, separation, and washing steps. To minimize the risks of contamination and false-positive, we for the first time proposed a photocatalytic aptamer chemiluminescent system for a homogeneous, label-free, generic assay of small molecules. After binding to a DNA aptamer, thioflavin T has a unique photocatalytic oxidase activity to activate the system's luminol chemiluminescence. Then, the specific binding between the aptamer and target molecules will compete with the above process. Therefore, we can realize the efficient assay of different analytes including estradiol and adenosine. Such a homogeneous chemiluminescent system allowed a direct assay of small molecules with limits of detection in a nM level. Several control tests were carried out to avoid possible false-positive results, which were originated from the interactions between analytes and sensing interfaces previously. This homogeneous chemiluminescent system provides a useful strategy to reliably assay various analytes in the pharmacy or biology field.

Gelation Behaviour of Pluronic F127/Polysaccharide Systems Revealed via Thioflavin T Fluorescence

Fast, reliable methods for characterizing the micelle-to-gel transition in emerging Pluronic F127/polysaccharide materials are essential for tailoring their applications as in situ gelling delivery systems. This study describes a simple fluorimetric method based on the response to gelation of the molecular probe thioflavin T (ThT). The techniques employed are (second derivative) steady-state and synchronous fluorescence. The capabilities of ThT as gelation reporter are tested for three model systems: Pluronic F127 (P16.6%), Pluronic F127/alginate (P16.6%ALG2%) and Pluronic F127/hyaluronic acid (P16.6%HA0.5%). We demonstrate that the changes in the short and long wavelength emissions of ThT allow accurate determination of the critical gelation temperatures in the investigated systems. The spectroscopic data providing information at molecular level are complemented with differential scanning microcalorimetric results revealing additional macroscopic insight into the micellization process. The gelation study is preceded by a solvatochromic analysis of ThT.

Boosted Cross-Linking and Characterization of High-Performing Self-Assembling Peptides

Tissue engineering (TE) strategies require the design and characterization of novel biomaterials capable of mimicking the physiological microenvironments of the tissues to be regenerated. As such, implantable materials should be biomimetic, nanostructured and with mechanical properties approximating those of the target organ/tissue. Self-assembling peptides (SAPs) are biomimetic nanomaterials that can be readily synthesized and customized to match the requirements of some TE applications, but the weak interactions involved in the self-assembling phenomenon make them soft hydrogels unsuited for the regeneration of medium-to-hard tissues. In this work, we moved significant steps forward in the field of chemical cross-linked SAPs towards the goal of stiff peptidic materials suited for the regeneration of several tissues. Novel SAPs were designed and characterized to boost the 4-(N-Maleimidomethyl) cyclohexane-1-carboxylic acid 3-sulpho-N-hydroxysuccinimide ester (Sulfo-SMCC) mediated cross-linking reaction, where they reached G′ values of ~500 kPa. An additional orthogonal cross-linking was also effective and allowed to top remarkable G′ values of 840 kPa. We demonstrated that cross-linking fastened the pre-existing self-aggregated nanostructures, and at the same time, a strong presence of ß-structures is necessary for an effective cross-linking of (LKLK)₃-based SAPs. Combining strong SAP design and orthogonal cross-linking reactions, we brought SAP stiffness closer to the MPa threshold, and as such, we opened the door of the regeneration of skin, muscle and lung to biomimetic SAP technology.

Thioflavin T: Electronic Circular Dichroism and Circularly Polarized Luminescence Induced by Amyloid Fibrils

The circularly polarized luminescence (CPL) spectrum of thioflavin T (ThT) bound to insulin amyloid fibrils has been measured for the first time. It has been found that the samples exhibiting induced circular dichroism (CD) retain the optical activity in the CPL spectra, with the same sign of the rotatory strength. The fluorescence dissymmetry factor is substantial (of the order of magnitude 10(-2) ). Unlike in the corresponding CD and absorption spectra, there is no shift of the CPL band with respect to the fluorescence band. It has been verified that the measured CPL spectra are free from artifacts from circularly polarized scattering of emitted light by conducting additional measurements in a medium with a refractive index similar to insulin (methylsalicylate). The CD and CPL spectra have been interpreted by means of density functional calculations carried out for ThT in its ground and first excited states in different dielectric environments and for ThT interacting with an aromatic ring. It has been found that the presence of an aromatic ring close to the ThT molecule induces Cotton effects of the same order of magnitude as the stabilization of one enantiomeric conformer. Thus, it is expected that both mechanisms contribute to the induced CD and CPL effect to a similar degree.

Nano-rods of doxorubicin with poly(l-glutamic acid) as a carrier-free formulation for intratumoral cancer treatment

Nano-rods of doxorubicin (DOX) were prepared by co-assembly with poly(l-glutamic acid) (PGA) and demonstrated a desired release profile for intratumoral administration that significantly prolonged the survival time of tumor-bearing mice.

A RET-supported logic gate combinatorial library to enable modeling and implementation of intelligent logic functions

A logic gate combinatorial library, including basic logic gates, a single three-input NOR gate, and combinatorial gates to realize intelligent logic functions (keypad-lock, parity checker) is constructed.

Boolean logic gates integrate multiple digital inputs into a digital output. Among these, logic gates based on nucleic acids have attracted a great deal of attention due to the prospect of controlling living systems in the way we control electronic computers. Herein, by employing Thioflavin T (ThT) as a signal transducer, we integrated multiple components based on RET (a type of proto-oncogene) into a logic gate combinatorial library, including basic logic gates (NOR, INHIBIT, IMPLICATION), a single three-input NOR gate, and combinatorial gates (INHIBIT–OR, NOT–AND–NOR). In this library, gates were connected in series where the output of the previous gate was the input for the next gate. Subsequently, by taking advantage of the library, some intelligent logic functions were realized. Expectedly, a biocomputing keypad-lock security system was designed by sequential logic operations. Moreover, a parity checker which can identify even numbers and odd numbers from natural numbers was established successfully. This work helps elucidate the design rules by which simple logic can be harnessed to produce diverse and complex calculations by rewiring communication between different gates. Together, our system may serve as a promising proof of principle that demonstrates increased computational complexity by linking multiple logic gates together.

Probing structural changes of self assembled i-motif DNA

We report an i-motif structural probing system based on Thioflavin T (ThT) as a fluorescent sensor. This probe can discriminate the structural changes of RET and Rb i-motif sequences according to pH change.

Amyloidogenic Properties of Short α-L-Glutamic Acid Oligomers

Poly-L-glutamic acid (PLGA) forms amyloid-like β2-fibrils with the main spectral component of vibrational amide I' band unusually shifted below 1600 cm(-1). This distinct infrared feature has been attributed to the presence of bifurcated hydrogen bonds coupling C═O and N-D (N-H) groups of the main chains to glutamate side chains. Here, we investigate how decreasing the chain length of PLGA affects its capacity to form β2-fibrils. A series of acidified aqueous solutions of synthetic (l-Glu)n peptides (n ≈ 200, 10, 6, 5, 4, and 3) were incubated at high temperature. We observed that n = 4 is the critical chain length for which formation of aggregates with the β2-like infrared features is still observed under such conditions. Interestingly, according to atomic force microscopy (AFM), the self-assembly of (L-Glu)n chains varying vastly in length produces fibrils with rather uniform diameters of approximately 4-6 nm. Kinetic experiments on (L-Glu)5 and (L-Glu)200 peptides indicate that the fibrillation is significantly accelerated not only in the presence of homologous seeds but also upon cross-seeding, suggesting thereby a common self-assembly theme for (L-Glu)n chains of various lengths. Our results are discussed in the context of mechanisms of amyloidogenic fibrillation of homopolypeptides.

Highly amyloidogenic two-chain peptide fragments are released upon partial digestion of insulin with pepsin

Proteases play a well recognized role in the emergence of highly aggregation-prone protein fragments in vivo, whereas in vitro limited proteolysis is often employed to probe different phases of amyloidogenic pathways. Here, we show that addition of moderate amounts of pepsin to acidified bovine insulin at close to physiological temperature results in an abrupt self-assembly of amyloid-like fibrils from partially digested insulin fragments. Biochemical analysis of the pepsin-induced fibrils implicates peptide fragments (named H) consisting of the 13 or 15 N-terminal residues of the A-chain and 11 or 13 N-terminal residues of the B-chain linked by the disulfide bond between Cys-7A-Cys-7B as the main constituents. There are up to eight pepsin-cleavage sites remaining within the double chain peptide, which become protected upon fast fibrillation unless concentration of the enzyme is increased resulting in complete digestion of insulin. Controlled re-association of H-peptides leads to "explosive" fibrillation only under nonreducing conditions implying the key role of the disulfide bond in their amyloidogenicity. Such re-assembled amyloid is similar in terms of morphology and infrared features to typical bovine insulin fibrils, although it lacks the ability to seed the intact protein.

Covalent defects restrict supramolecular self-assembly of homopolypeptides: case study of β2-fibrils of poly-L-glutamic acid

Poly-L-glutamic acid (PLGA) often serves as a model in studies on amyloid fibrils and conformational transitions in proteins, and as a precursor for synthetic biomaterials. Aggregation of PLGA chains and formation of amyloid-like fibrils was shown to continue on higher levels of superstructural self-assembly coinciding with the appearance of so-called β2-sheet conformation manifesting in dramatic redshift of infrared amide I' band below 1600 cm(-1). This spectral hallmark has been attributed to network of bifurcated hydrogen bonds coupling C = O and N-D (N-H) groups of the main chains to glutamate side chains. However, other authors reported that, under essentially identical conditions, PLGA forms the conventional in terms of infrared characteristics β1-sheet structure (exciton-split amide I' band with peaks at ca. 1616 and 1683 cm(-1)). Here we attempt to shed light on this discrepancy by studying the effect of increasing concentration of intentionally induced defects in PLGA on the tendency to form β1/β2-type aggregates using infrared spectroscopy. We have employed carbodiimide-mediated covalent modification of Glu side chains with n-butylamine (NBA), as well as electrostatics-driven inclusion of polylysine chains, as two different ways to trigger structural defects in PLGA. Our study depicts a clear correlation between concentration of defects in PLGA and increasing tendency to depart from the β2-structure toward the one less demanding in terms of chemical uniformity of side chains: β1-structure. The varying predisposition to form β1- or β2-type aggregates assessed by infrared absorption was compared with the degree of morphological order observed in electron microscopy images. Our results are discussed in the context of latent covalent defects in homopolypeptides (especially with side chains capable of hydrogen-bonding) that could obscure their actual propensities to adopt different conformations, and limit applications in the field of synthetic biomaterials.

Thioflavin T Promotes Aβ(1-40) Amyloid Fibrils Formation

Fibrillogenesis of the small peptide Aβ(1-40) is considered to be the hallmark of Alzheimer's disease. Some evidence indicates small oligomers, rather than mature fibrils, as the key cytotoxic agents. The fluorescent dye Thioflavin T (ThT) is often used to detect amyloid deposits in both in vivo and in vitro experiments, and it is used to study kinetic measurements, under the fundamental hypothesis that this probe does not influence the aggregation processes. We report experimental data showing that ThT may promote the Aβ(1-40) peptide amyloid aggregation changing solvent-peptide interactions and stabilizing more ordered β-like conformation. This finding has a two-fold importance: It is a fundamental warning in all fibrillation experiments where ThT is used as fluorescent probe, and it suggests that ThT, accelerating fibril formation, could be used to reduce the presence of transient small oligomers, thus interfering with the pathogenic impact of Aβ peptide.

An FT-IR study on packing defects in mixed β-aggregates of poly(L-glutamic acid) and poly(D-glutamic acid): a high-pressure rescue from a kinetic trap

Under favorable conditions of pH and temperature, poly(L-glutamic acid) (PLGA) adopts different types of secondary and quaternary structures, which include spiral assemblies of amyloid-like fibrils. Heating of acidified solutions of PLGA (or PDGA) triggers formation of β(2)-type aggregates with morphological and tinctorial properties typical for amyloid fibrils. In contrast to regular antiparallel β-sheet (β(1)), the amide I' vibrational band of β(2)-fibrils is unusually red-shifted below 1600 cm(-1), which has been attributed to bifurcated hydrogen bonds coupling C═O and N-D groups of the main chains to glutamic acid side chains. However, unlike for pure PLGA, the amide I' band of aggregates precipitating from racemic mixtures of PLGA and PDGA (β(1)) is dominated by components at 1613 and 1685 cm(-1)-typically associated with intermolecular antiparallel β-sheets. The coaggregation of PLGA and PDGA chains is slower and biphasic and leads to less-structured assemblies of fibrils, which is reflected in scanning electron microscopy images, sedimentation properties, and fluorescence intensity after staining with thioflavin T. The β(1)-type aggregates are metastable, and they slowly convert to fibrils with the infrared characteristics of β(2)-type fibrils. The process is dramatically accelerated under high pressure. This implies the presence of void volumes within structural defects in racemic aggregates, preventing the precise alignment of main and side chains necessary to zip up ladders of bifurcated hydrogen bonds. As thermodynamic costs associated with maintaining void volumes within the racemic aggregate increase under high pressure, a hyperbaric treatment of misaligned chains leads to rectifying the packing defects and formation of the more compact form of fibrils.