Carbon capture in polymer-based electrolytes

Nanoparticle organic hybrid materials (NOHMs) have been proposed as excellent electrolytes for combined CO2 capture and electrochemical conversion due to their conductive nature and chemical tunability. However, CO2 capture behavior and transport properties of these electrolytes after CO2 capture have not yet been studied. Here, we use a variety of nuclear magnetic resonance (NMR) techniques to explore the carbon speciation and transport properties of branched polyethylenimine (PEI) and PEI-grafted silica nanoparticles (denoted as NOHM-I-PEI) after CO2 capture. Quantitative 13C NMR spectra collected at variable temperatures reveal that absorbed CO2 exists as carbamates (RHNCOO- or RR'NCOO-) and carbonate/bicarbonate (CO32-/HCO3-). The transport properties of PEI and NOHM-I-PEI studied using 1H pulsed-field-gradient NMR, combined with molecular dynamics simulations, demonstrate that coulombic interactions between negatively and positively charged chains dominate in PEI, while the self-diffusion in NOHM-I-PEI is dominated by silica nanoparticles. These results provide strategies for selecting adsorbed forms of carbon for electrochemical reduction.

Polymerized and Colloidal Ionic Liquids─Syntheses and Applications

The breadth and importance of polymerized ionic liquids (PILs) are steadily expanding, and this review updates advances and trends in syntheses, properties, and applications over the past five to six years. We begin with an historical overview of the genesis and growth of the PIL field as a subset of materials science. The genesis of ionic liquids (ILs) over nano to meso length-scales exhibiting 0D, 1D, 2D, and 3D topologies defines colloidal ionic liquids, CILs, which compose a subclass of PILs and provide a synthetic bridge between IL monomers (ILMs) and micro to macro-scale PIL materials. The second focus of this review addresses design and syntheses of ILMs and their polymerization reactions to yield PILs and PIL-based materials. A burgeoning diversity of ILMs reflects increasing use of nonimidazolium nuclei and an expanding use of step-growth chemistries in synthesizing PIL materials. Radical chain polymerization remains a primary method of making PILs and reflects an increasing use of controlled polymerization methods. Step-growth chemistries used in creating some CILs utilize extensive cross-linking. This cross-linking is enabled by incorporating reactive functionalities in CILs and PILs, and some of these CILs and PILs may be viewed as exotic cross-linking agents. The third part of this update focuses upon some advances in key properties, including molecular weight, thermal properties, rheology, ion transport, self-healing, and stimuli-responsiveness. Glass transitions, critical solution temperatures, and liquidity are key thermal properties that tie to PIL rheology and viscoelasticity. These properties in turn modulate mechanical properties and ion transport, which are foundational in increasing applications of PILs. Cross-linking in gelation and ionogels and reversible step-growth chemistries are essential for self-healing PILs. Stimuli-responsiveness distinguishes PILs from many other classes of polymers, and it emphasizes the importance of segmentally controlling and tuning solvation in CILs and PILs. The fourth part of this review addresses development of applications, and the diverse scope of such applications supports the increasing importance of PILs in materials science. Adhesion applications are supported by ionogel properties, especially cross-linking and solvation tunable interactions with adjacent phases. Antimicrobial and antifouling applications are consequences of the cationic nature of PILs. Similarly, emulsion and dispersion applications rely on tunable solvation of functional groups and on how such groups interact with continuous phases and substrates. Catalysis is another significant application, and this is an historical tie between ILs and PILs. This component also provides a connection to diverse and porous carbon phases templated by PILs that are catalysts or serve as supports for catalysts. Devices, including sensors and actuators, also rely on solvation tuning and stimuli-responsiveness that include photo and electrochemical stimuli. We conclude our view of applications with 3D printing. The largest components of these applications are energy related and include developments for supercapacitors, batteries, fuel cells, and solar cells. We conclude with our vision of how PIL development will evolve over the next decade.

Interfacial-interaction induced modifications in segmental dynamics and free volume of the poly(ethyleneimine) canopy in nanoparticle-organic hybrid materials: an investigation by temperature dependent broadband dielectric and positron annihilation spectroscopy

Broadband dielectric spectroscopy, positron annihilation lifetime spectroscopy and differential scanning calorimetry are used to investigate the molecular dynamics, free volume and thermal behaviour of a poly(ethyleneimine), PEI, canopy in liquid-like nanoparticle-organic hybrid materials (NOHMs) consisting of alumina nanoparticles and nanorods as inorganic nanocores. It is confirmed that the highly branched PEI canopy in liquid-like NOHMs possesses an ordered structure having less entanglements of the side chains as compared to neat PEI. The size of the free volumes associated with the PEI canopy for nanoparticle- and nanorod-based NOHMs is larger and smaller, respectively, as compared to neat PEI. The time scales characterizing the segmental dynamics and side chain relaxations of the canopy in the nanorod-based NOHM are slowed down drastically as compared to the nanoparticle-based NOHM and neat PEI. These results confirm that the shape of the inorganic cores plays a deterministic role toward the structural arrangement (free volume) and segmental dynamics of the canopy polymer in liquid-like NOHMs.

Advances in Nanomaterials for Sustainable Gas Separation and Storage: Focus on Clathrate Hydrates

ConspectusClathrate hydrates, also known as gas hydrates, are a type of inclusion compound formed in highly developed nanoporous lattice spaces created by water molecules, where gas molecules such as CO2, H2, CH4, and other low-molecular-weight liquid molecules are trapped. The nanoporous cage formed by water molecules serves as the "host", while the trapped gas or low-molecular-weight liquid molecules such as tetrahydrofuran act as "guests". Early on, clathrate hydrates drew attention as a potential replacement for conventional natural gas due to their natural gas hydrate form, which contains natural gases as guests and exists in permafrost or sea floors. Recently, based on the unique physicochemical properties of clathrate hydrates, efforts are being made to utilize synthetic clathrate hydrates in various separation processes such as post- and pre-combustion CO2 capture, H2 storage, natural gas storage and transportation, wastewater desalination, and more. While it is undeniable that clathrate hydrates are based on principles that are beneficial for the separation and storage of gas molecules, there are several challenges that must be addressed for their practical application. These challenges include (i) the limitation of gas storage capacity due to the confined size of nanoporous cages, (ii) the relatively high-pressure and low-temperature thermodynamic storage conditions typically required for clathrate hydrate formation, and (iii) slow formation kinetics and low gas hydrate conversion, which are also essential issues that need to be resolved for the meaningful implementation of clathrate hydrates. In this Account, we aim to introduce recent noteworthy research findings, including those from our research team, focusing on addressing these challenges. We explored the untapped potential of clathrate hydrates by bridging the gap between macroscopic and microscopic properties. This has led to breakthroughs in sustainable gas separation and storage applications. By revealing the hidden nature of these hydrates, we have effectively mitigated their inherent limitations, setting the stage for more feasible and efficient H2 storage solutions through the introduction of hydrogen-natural gas blends to clathrate hydrates. Additionally, we have demonstrated the tuning effect on all naturally formed hydrate structures, offering new insights into their underlying properties and macroscopic behavior. Furthermore, our research has proposed a highly efficient hydrate-based pre-combustion CO2 capture approach that leverages porous media with appropriate wettability and considers the implications of microstructure properties. This emphasizes the crucial connection between nano-structure and macroscopic properties, underscoring the significance of understanding their interplay for economic feasibility. We believe that our efforts to unveil the hidden nature of gas hydrates provide strategies to address challenges and lay the groundwork for practical applications.

Characterizing the interaction between micro(nano)plastics and simulated body fluids and their impact on human lung epithelial cells

Micro(nano)plastics are considered an emerging threat to human health because they can interact with biological systems. In fact, these materials have already been found in the human body, such as in the lungs. However, limited data are available on the behavior of these materials under biological conditions and their impact on human cells, specifically on alveolar epithelial cells. In this study, micro(nano)plastics were exposed to various simulated biological fluids (artificial lysosomal fluids and Gamble's solution) for 2-80 h. Pristine and treated plastic particles were characterized based on their surface chemistry, zeta potentials, and elemental composition. Various toxicological endpoints (mitochondrial membrane potential, lactate dehydrogenase, protein, and antioxidant levels) were examined using A549 lung carcinoma cells. The surface characteristics of the treated micro(nano)plastics and the toxicological endpoints of A549 cells were found to be influenced by the simulated biological media, specifically with high concentrations of the treated micro(nano)plastics and increasing exposure under biological conditions. Moreover, the toxicological endpoints were strongly linked to the chemistry of plastics and included multiple processes in response to the plastics; different biological pathways were obtained in artificial lysosomal fluid and Gamble's solution.

Enthalpic Interactions and Solution Behaviors of Solvent-Free Polymer Brushes

We performed molecular dynamics simulations to characterize the role of enthalpic interaction in impacting the static and dynamic properties of solvent-free polymer brushes. The intrinsic enthalpic interaction in the simulation was introduced using different attraction strengths between distinct species. Two model systems were considered: one consisting of binary brushes of two different polymer types and the other containing a mixture of homopolymer brushes and free molecules. In the first system, we observed that, when two originally incompatible polymers were grafted to opposing surfaces, the miscibility between them was significantly enhanced. A less favorable intrinsic enthalpic interaction in the brushes resulted in a more stretched chain configuration, a lower degree of inter-brush penetration, and faster segmental relaxation. In the second system, we characterized the solvent capacity of the homopolymer brushes from variations in the energy components of the system as a function of the number of free molecules. We determined that molecular absorption was driven by the release of the entropic frustration for the grafted chains in conjunction with the chemical affinity between the solutes and polymers. The solute distribution function within the inter-wall space showed that solute-polymer mixing in the middle of the gap occurred preferentially when the enthalpic interaction was more favorable. When this was not the case, absorption was predominantly localized near the grafting surface. From the mean square displacement of the solute, we found that the brush profiles restrained the molecular diffusion perpendicular to the grafting wall; the weaker the attraction from the brush, the higher the solute mobility.

Mechanistic Study of Controlled Zinc Electrodeposition Behaviors Facilitated by Nanoscale Electrolyte Additives at the Electrode Interface

Nanoparticle organic hybrid materials (NOHMs) are liquid-like materials composed of an inorganic core to which a polymeric canopy is ionically tethered. NOHMs have unique properties including negligible vapor pressure, high oxidative thermal stability, and the ability to bind to reactive species of interest due to the tunability of their polymeric canopy. This makes them promising multifunctional materials for a wide range of energy and environmental technologies, including electrolyte additives for electrochemical energy storage (e.g., flow batteries) and the electrochemical conversion of CO₂ to chemicals and fuels. Due to their unique transport behaviors in fluid systems, an understanding of the near-electrode surface behavior of NOHMs in electrolyte solutions and their effect on electrochemical reactions is still lacking. In this work, the complexation of zinc (Zn) by NOHMs with an ionically tethered polyetheramine canopy (HPE) (NOHM-I-HPE) was studied using attenuated total reflectance Fourier transform infrared and Carbon-13 nuclear magnetic resonance spectroscopy. Additionally, various electrochemical techniques were employed to discern the role of NOHM-I-HPE during zinc electrodeposition, and the results were compared to those of the electrochemical system containing untethered HPE polymers. Our findings confirmed that NOHM-I-HPE and HPE reversibly complex zinc in the aqueous electrolyte. NOHM-I-HPE and HPE were found to block some of the electrode active sites, reducing the overall current density during electrodeposition, while facilitating the formation of smooth zinc deposits, as revealed by surface imaging and diffraction techniques. Observed variations in the current density responses and the degree of passivation created by the NOHM-I-HPE and HPE adsorbed on the electrode surface revealed that their different packing behaviors at the electrode-electrolyte interface influence the zinc deposition mechanism. The presence of the nanoparticle and ordering offered by the NOHMs as well as the structured conformation of the polymeric canopy allowed the formation of void spaces and free volumes for enhanced transport behaviors. These findings provided insights into how structured electrolyte additives such as NOHMs can allow for advancements in electrolyte design for controlled deposition of metal species from energy-dense electrolytes or for other electrochemical reactions.

Nanoscale Hybrid Electrolytes with Viscosity Controlled Using Ionic Stimulus for Electrochemical Energy Conversion and Storage

As renewable energy is rapidly integrated into the grid, the challenge has become storing intermittent renewable electricity. Technologies including flow batteries and CO₂ conversion to dense energy carriers are promising storage options for renewable electricity. To achieve this technological advancement, the development of next generation electrolyte materials that can increase the energy density of flow batteries and combine CO₂ capture and conversion is desired. Liquid-like nanoparticle organic hybrid materials (NOHMs) composed of an inorganic core with a tethered polymeric canopy (e.g., polyetheramine (HPE)) have a capability to bind chemical species of interest including CO₂ and redox-active species. In this study, the unique response of NOHM-I-HPE-based electrolytes to salt addition was investigated, including the effects on solution viscosity and structural configurations of the polymeric canopy, impacting transport behaviors. The addition of 0.1 M NaCl drastically lowered the viscosity of NOHM-based electrolytes by up to 90%, reduced the hydrodynamic diameter of NOHM-I-HPE, and increased its self-diffusion coefficient, while the ionic strength did not alter the behaviors of untethered HPE. This study is the first to fundamentally discern the changes in polymer configurations of NOHMs induced by salt addition and provides a comprehensive understanding of the effect of ionic stimulus on their bulk transport properties and local dynamics. These insights could be ultimately employed to tailor transport properties for a range of electrochemical applications.

Dynamic Mixing Behaviors of Ionically Tethered Polymer Canopy of Nanoscale Hybrid Materials in Fluids of Varying Physical and Chemical Properties

An emerging area of sustainable energy and environmental research is focused on the development of novel electrolytes that can increase the solubility of target species and improve subsequent reaction performance. Electrolytes with chemical and structural tunability have allowed for significant advancements in flow batteries and CO₂ conversion integrated with CO₂ capture. Liquid-like nanoparticle organic hybrid materials (NOHMs) are nanoscale fluids that are composed of inorganic nanocores and an ionically tethered polymeric canopy. NOHMs have been shown to exhibit enhanced conductivity making them promising for electrolyte applications, though they are often challenged by high viscosity in the neat state. In this study, a series of binary mixtures of NOHM-I-HPE with five different secondary fluids, water, chloroform, toluene, acetonitrile, and ethyl acetate, were prepared to reduce the fluid viscosity and investigate the effects of secondary fluid properties (e.g., hydrogen bonding ability, polarity, and molar volume) on their transport behaviors, including viscosity and diffusivity. Our results revealed that the molecular ratio of secondary fluid to the ether groups of Jeffamine M2070 (λ_SF) was able to describe the effect that secondary fluid has on transport properties. Our findings also suggest that in solution, the Jeffamine M2070 molecules exist in different nanoscale environments, where some are more strongly associated with the nanoparticle surface than others, and the conformation of the polymer canopy was dependent on the secondary fluid. This understanding of the polymer conformation in NOHMs can allow for the better design of an electrolyte capable of capturing and releasing small gaseous or ionic species.

Molecular Dynamics Study of the Dispersion Stability and Fluidity of Porous Liquids with Different Canopy Structures

Porous liquids (PLs) as a new class of materials have broad application prospects in many areas such as gas separation and storage, air separation, and homogeneous catalysis. Here, molecular dynamics simulations were used to advance the understanding of PLs with different canopy structures. PLs composed of hollow SiO₂ molecules, which were functionalized with polymer chains containing coronas and canopies to make them liquid at accessible temperatures, were quite different from pure SiO₂ nanoparticles. It was found that linear and long canopy structures were better for dispersion of PLs, which was mainly due to the steric hindrance effect instead of electrostatic (charge) repulsion. In addition, simulation results demonstrated that PLs with long and linear polymer chains tended to have smaller relative entanglement depth, which means lower viscosity and better fluidity. Moreover, to keep intrinsic pores empty, PLs should possess long and linear canopies.

Structural and Dynamical Coupling in Solvent-Free Polymer Brushes Elucidated by Molecular Dynamics Simulations

We investigate the chain configuration and segmental dynamics in interacting solvent-free polymer brushes using molecular dynamics simulations. The brush systems are designed to mimic the interstitial space between a pair of neighboring polymer-grafted nanoparticles in solvent-free nanoparticle-organic hybrid materials. Each brush consists of uniformly grafted chains formed by a given number of monomer beads. In monodisperse systems, two opposing brushes have the same chain length and grafting density. In mixed conditions, we consider binary systems with two surfaces being separately grafted with polymers of distinct chain lengths at different grafting densities as well as bidisperse systems with polymers of two different lengths being tethered to the surfaces at a fixed grafting density. We demonstrate that the brush configuration and interpenetration are both governed by the need that monomer beads have to uniformly fill the space. For systems with longer chain lengths and/or higher grafting densities, the larger interwall separation yields more stretched brush conformations and reduced extents of interbrush mixing. As a result, the polymer configurational entropy is generally decreased and the segment-to-segment relaxation dynamics is slowed down accordingly. The grafting of chains at a high density not only makes the relaxation dynamics deviate from the standard Rouse prediction but also leads to distinct relaxation times for the free and tethered segments. The more slowly relaxing tethered segments play a more important role in determining the overall end-to-end fluctuations. Moreover, the two distinct relaxation processes are consistent with the two-stage decay in the Rouse mode fluctuation autocorrelation function. In the presence of brush bidispersity, the collaboration between polymers of different lengths is evidently observed in the brush profiles. The variations of the chain configuration for the two polymers are complementary, and the associated relaxation dynamics of the two species are significantly coupled.

Spectroscopic Investigation of Entropic Canopy-Canopy Interactions of Nanoparticle Organic Hybrid Materials

Nanoparticle organic hybrid materials (NOHMs) are self-suspended liquid-like nanoparticle-based functional materials consisting of a surface-functionalized inorganic nanocore and oligomeric or polymeric chains. They often exhibit complex intermolecular and intramolecular interactions among their constituents, resulting in versatile physicochemical characteristics that range from glassy solids to solvent-free nanoparticle fluids. A variety of applications involving NOHMs have been investigated thus far, including thermal management fluids, lubricants, magnetic fluids, nanocomposites, electrolytes, water treatment and biomass pretreatment chemicals, and CO₂ capture solvents. In particular, NOHMs have recently been recognized as a promising CO₂ capture and utilization medium. To capture CO₂ more effectively, a variety of specific functional groups of strong chemical affinity to CO₂ can be added to the polymeric canopy (enthalpic contribution), and various steric considerations induced by attractive/repulsive interactions among the nanocores and canopies can be introduced (entropic contribution). These occur while maintaining negligible vapor pressure and enhanced thermal stability. Here, we investigated the canopy dynamics of NOHMs with different-sized SiO₂ nanocores, aiming to reveal the hidden nature of the entropic interaction occurring in NOHMs. Pulse-field gradient nuclear magnetic resonance spectroscopy (with ¹H) was employed to investigate the canopy dynamics of the NOHMs synthesized using 7, 12, and 22 nm SiO₂ particles, and these results were compared with those from a ternary mix of all three sizes of SiO₂ nanocores. The self-diffusion coefficient and thermal diffusivity were also evaluated.

Entropic Effects in Solvent-Free Bidisperse Polymer Brushes Investigated Using Density Functional Theories

Solvent-free polymer-functionalized nanoparticles form a special type of colloid composed of inorganic cores self-suspended by their grafted coronas. In the absence of intervening solvent molecules, the fluidity of the system is provided by these tethered polymers as they fill the space. Here, we study the structure and interaction of neighboring polymer-grafted surfaces in the solvent-free condition using mean-field density functional theories. For opposing flat surfaces, the brush configuration and the associated energy landscape are semianalytically investigated given the incompressibility of the tethered entropic chains. The effect of brush polydispersity (including variations in both chain length and surface grafting density) is considered by two bidisperse models corresponding to different physical scenarios: one for opposing brushes uniformly mixed with two species at a fixed grafting density, and the other for opposing brushes with distinct chain lengths and grafting densities. The space-filling capabilities of the neighboring coronas differ not only by their ratio of radii of gyration for the composing polymers but also by their ratio of grafting densities. We show that the system energy depicts a steric repulsion as the brushes are compressed, which is typical for hairy particles in a solvent. However, as the interwall separation increases, the cooperative stretching of the chains leads to an entropic attraction between them, a unique characteristic of solventless systems. The corresponding brush profiles change from a bell-like shape to a more step-function-like feature as the interwall spacing increases significantly. The interwall separation associated with the overall free energy minimum therefore characterizes the favorable interparticle spacing for solvent-free polymer-functionalized particles. The limiting accessible parameter space of polymer sizes and grafting densities subjected to the space-filling constraint is comprehensively explored for representative interparticle spacing characterizing the compressed, relaxed, and stretched regimes for a given polymer species, respectively. Such information would be useful for guiding the design of experimental solvent-free polymer-functionalized nanoparticles.

Review of liquid nano-absorbents for enhanced CO2 capture

Liquid nano-absorbents have become a topic of interest as a result of their enhanced mass-transfer performance for CO₂ capture. They are believed to have revolutionized the conventional CO₂ chemisorption process by largely improving CO₂ capture kinetics and reducing the energy requirement for solvent regeneration. Two classes of nanomaterial-based CO₂ capture absorbents, amine-based nanoparticle suspensions (nanofluids) and nanoparticle organic hybrid materials (NOHMs), have been developed, with significant progress achieved in recent decades. This review addresses two key questions for these two state-of-the-art nanomaterials: how are the physical and chemical properties of the prepared liquid nano-absorbents transformed relative to those of the base fluids? And how does the transformation of the properties affect the CO₂ capture behavior? While the current synthesis procedure for liquid nano-absorbents is quite straightforward, more advanced synthesis methods for long-term nanoparticle stability have been suggested for the future. Nanofluids have been shown to increase the CO₂ uptake by over 20% and the CO₂ capture rate by 2-93% compared with the values observed with neat amine solvents. Nanoparticles with catalytic effects on CO₂ capture can significantly increase the CO₂ desorption rate by as high as 4000%. NOHMs exhibit the interesting feature of enhanced mass transfer in CO₂ capture because of the unique pathway network that is created in them for CO₂ to reach specific functional groups. NOHMs promise an effect of combined CO₂ capture and conversion, and can be used especially as electrolytes for CO₂ electro-reduction. However, there are still some challenges for the application of these materials in real life, such as poor stability and high viscosity. Therefore, efficient CO₂ capture processes using these solvents need to be urgently developed and studied in the future.

Solvent-free nanofluid with three structure models based on the composition of a MWCNT/SiO2 core and its adsorption capacity of CO2

A series of core/shell nanoparticle organic/inorganic hybrid materials (NOHMs) with different weight ratios of two components, consisting of multi-walled carbon nanotubes (MWCNTs) and silicon dioxide (SiO₂) as the core were synthesized. The NOHMs display a liquid-like state in the absence of solvent at room temperature. Five NOHMs were categorized into three kinds of structure states based on different weight ratio of two components in the core, named the power strip model, the critical model and the collapse model. The capture capacities of these NOHMs for CO₂ were investigated at 298 K and CO₂ pressures ranging from 0 to 5 MPa. Compared with NOHMs having a neat MWCNT core, it was revealed that NOHMs with the power strip model show better adsorption capacity toward CO₂ due to its lower viscosity and more reactive groups that can react with CO₂. In addition, the capture capacities of NOHMs with the critical model were relatively worse than the neat MWCNT-based NOHM. The result is attributed to the aggregation of SiO₂ in these samples, which may cause the consumption and hindrance of reactive groups. However, the capture capacity of NOHMs with the collapse model was the worst of all the NOHMs, owing to its lowest content of reactive groups and hollow structure in MWCNTs. In addition, they presented non-interference of MWCNTs and SiO₂ without aggregation state.

Particle localization and hyperuniformity of polymer-grafted nanoparticle materials

The properties of materials largely reflect the degree and character of the localization of the molecules comprising them so that the study and characterization of particle localization has central significance in both fundamental science and material design. Soft materials are often comprised of deformable molecules and many of their unique properties derive from the distinct nature of particle localization. We study localization in a model material composed of soft particles, hard nanoparticles with grafted layers of polymers, where the molecular characteristics of the grafted layers allow us to "tune" the softness of their interactions. Soft particles are particular interesting because spatial localization can occur such that density fluctuations on large length scales are suppressed, while the material is disordered at intermediate length scales; such materials are called "disordered hyperuniform". We use molecular dynamics simulation to study a liquid composed of polymer-grafted nanoparticles (GNP), which exhibit a reversible self-assembly into dynamic polymeric GNP structures below a temperature threshold, suggesting a liquid-gel transition. We calculate a number of spatial and temporal correlations and we find a significant suppression of density fluctuations upon cooling at large length scales, making these materials promising for the practical fabrication of "hyperuniform" materials.

Investigation of a power strip-like composite nanoparticle derivative with liquid-like behaviour on capturing carbon dioxide

Liquid-like power strip NOHMs based on a composite core of MWCNT/SiO₂are beneficial for CO₂captureviachemisorption and physisorption.

Self-assembly of polymer-grafted nanoparticles in solvent-free conditions

Grafting of polymer chains onto the surface of spherical nanoparticles leads to a hybrid type of fluid that exhibits properties of both particle suspensions and melts of star polymers-these properties being controlled by the relative dimensions of the grafted polymer chains to the nanoparticle diameter, D, and the number of the number of chains grafted on the nanoparticle surface, f. While polymer-grafted nanoparticles (GNP) of this kind typically have a spherical average shape after grafting even a moderate number of chains, their instantaneous molecular shape can fluctuate significantly due to the deformation of the grafted chains. Both simulations and measurements have previously revealed that these "conformationally polarizable" particles can exhibit self-assembly into large scale polymeric structures in both solution and in polymer melts, and we simulate polymer-grafted nanoparticles with D and temperature (T) variations without a dispersing solvent to better understand the nature of this self-assembly process. We observe a reversible self-assembly into linear and branched dynamic GNP structures, where the extent of the assembly and geometry depend on D and T, and we constructed a map capturing the GNP structural behavior with D and T variations. Since the shape of the GNPs appeared to be correlated with the occurrence of the GNP self-assembly, we quantified the average shape and a measure of shape fluctuations to better understand how molecular shape influences their propensity to self-assemble into different structural forms. Based on this framework, we describe the clustering process of the GNPs as an equilibrium polymerization phenomenon and we calculate the order parameter governing the dynamic clustering behavior of GNPs, the average mass of the clusters, size distribution, and the apparent fractal dimension of the clusters.

Comparison studies of rheological and thermal behaviors of ionic liquids and nanoparticle ionic liquids

Novel nanoparticle ionic liquids (NILs) are prepared by grafting modified nanoparticles with long-chain ionic liquids (ILs).

Porous liquids: a promising class of media for gas separation

A porous liquid containing empty cavities has been successfully fabricated by surface engineering of hollow structures with suitable corona and canopy species. By taking advantage of the liquid-like polymeric matrices as a separation medium and the empty cavities as gas transport pathway, this unique porous liquid can function as a promising candidate for gas separation. Moreover, such a facile synthetic strategy can be further extended to the fabrication of other types of nanostructure-based porous liquid, opening up new opportunities for preparation of porous liquids with attractive properties for specific tasks.

25th anniversary article: polymer-particle composites: phase stability and applications in electrochemical energy storage

Polymer-particle composites are used in virtually every field of technology. When the particles approach nanometer dimensions, large interfacial regions are created. In favorable situations, the spatial distribution of these interfaces can be controlled to create new hybrid materials with physical and transport properties inaccessible in their constituents or poorly prepared mixtures. This review surveys progress in the last decade in understanding phase behavior, structure, and properties of nanoparticle-polymer composites. The review takes a decidedly polymers perspective and explores how physical and chemical approaches may be employed to create hybrids with controlled distribution of particles. Applications are studied in two contexts of contemporary interest: battery electrolytes and electrodes. In the former, the role of dispersed and aggregated particles on ion-transport is considered. In the latter, the polymer is employed in such small quantities that it has been historically given titles such as binder and carbon precursor that underscore its perceived secondary role. Considering the myriad functions the binder plays in an electrode, it is surprising that highly filled composites have not received more attention. Opportunities in this and related areas are highlighted where recent advances in synthesis and polymer science are inspiring new approaches, and where newcomers to the field could make important contributions.

Thermal stability, swelling behavior and CO2 absorption properties of Nanoscale Ionic Materials (NIMs)

Nanoscale Ionic Materials (NIMs) consist of a nanoscale core, a corona of charged brushes tethered on the surface of the core, and a canopy of the oppositely charged species linked to the corona.

Design and characterization of liquidlike POSS-based hybrid nanomaterials synthesized via ionic bonding and their interactions with CO2

Liquidlike nanoparticle organic hybrid materials (NOHMs) were designed and synthesized by ionic grafting of polymer chains onto nanoscale silica units called polyhedral oligomeric silsesquioxane (POSS). The properties of these POSS-based NOHMs relevant to CO2 capture, in particular thermal stability, swelling, viscosity, as well as their interactions with CO2, were investigated using thermogravimetric analyses, differential scanning calorimetry, and NMR and ATR FT-IR spectroscopies. The results indicate that POSS units significantly enhance the thermal stability of the hybrid materials, and their porous nature also contributes to the overall CO2 capture capacity of NOHMs. The viscosity of the synthesized NOHMs was comparable to those reported for ionic liquids, and rapidly decreased as the temperature increased. The sorption of CO2 in POSS-based NOHMs also reduced their viscosities. The swelling behavior of POSS-based NOHMs was similar to that of previously studied nanoparticle-based NOHMs, and this generally resulted in less volume increase in NOHMs compared to their corresponding polymers for the same amount of CO2 loading.