Nucleophilic Aromatic Substitution of Halobenzenes and Phenols with Catalysis by Arenophilic π Acids

ConspectusLewis π acids, particularly high-valent transition metals with vacant orbitals, can coordinate with unsaturated compounds such as alkynes and alkenes by means of π-bonding. The coordination enhances the electrophilicity of the bound compounds, thereby facilitating reactions─such as nucleophilic addition─that take place at the ligated carbon-carbon multiple bonds. This activation phenomenon occurs at the ligand rather than at the metal atom, and it has been extensively utilized in the development of catalytic methods. In addition to alkynes and alkenes, aromatic compounds featuring a phenyl ring can be activated by an electrophilic transition-metal unit (e.g., Cr(CO)3, [Mn(CO)3]+, [CpFe]+, or [CpRu]+, where Cp = cyclopentadienyl) through π coordination. Over the past several decades, remarkable advances have been achieved in the development of reactions occurring on bound arenes, capitalizing on the highly electron-withdrawing nature of these transition-metal units and on the thermodynamic stability of η6-arene complexes. A prime example is the extension of nucleophilic aromatic substitution (SNAr) reactions to electron-neutral and -rich halobenzenes. Such arenes, which are normally inert to classical SNAr, can undergo sequences involving complex formation, substitution, and complex decomposition. Despite the successes achieved through the utilization of preformed complexes, the application of reversible arene coordination to catalytic systems has seen only limited progress. Consequently, in π-coordination activation, transition-metal units are commonly considered to be components of bound arene complexes rather than π-acid catalysts.In this Account, we summarize our recent research on catalytic SNAr reactions of halobenzenes and phenols enabled by reversible π-coordination of the arenes with electrophilic Ru or Rh catalysts, which we refer to as arenophilic π-acids. First, we developed a method for SNAr amination of fluorobenzenes with catalysis by a Ru(II) complex with a hemilabile P,O-bidentate ligand. The use of the hemilabile ligand significantly enhanced catalytic efficiency, allowing electron-rich and -neutral arenes to undergo amination without the need of excess fluorobenzenes. In a subsequent study of hydroxylation and alkoxylation reactions, we found that Rh(III) catalysts bearing a Cp-type ligand had a substantial activating effect. In addition, by isolating an η5 complex as the reaction intermediate, we obtained evidence in support of the long-standing hypothesis that SNAr of η6-arene complexes proceeds via a stepwise mechanism. Next, we extended the Rh-catalyzed SNAr to chloro- and bromobenzenes, which are abundant and readily available but are less reactive than corresponding fluorides toward SNAr. When the weakly nucleophilic alcohol hexafluoroisopropanol was used as a reaction partner, we were able to synthesize hexafluoroisopropyl aryl ethers, which are challenging to obtain by means of conventional approaches. Beyond halobenzenes, we successfully applied π-coordination strategy to achieve umpolung substitution reactions of phenols, which are typically nucleophilic. We found that an arenophilic Rh or Ru catalyst activated the phenol ring by π coordination instead of κ-O coordination, generating transient η5-phenoxo complexes that subsequently underwent carbonyl-amine condensation to produce anilines without the need for an exogenous oxidant or reductant. We anticipate that our research on catalyst development and reactions involving π-coordination activation will facilitate further advances in the application of arenophilic π acids.

Synthesis of Hexafluoroisopropyl Aryl Ethers via Dual Photoredox/Nickel-Catalyzed C-O Coupling

Herein we report a photoredox/nickel-catalyzed cross-coupling of aryl bromides with 1,1,1,3,3,3-hexafluoroisopropanol for the construction of hexafluoroisopropyl aryl ethers. The mild reaction conditions employed allow for the applicability of a wide range of aryl and heteroaryl bromides. Late-stage functionalization and preliminary mechanistic studies have been demonstrated.

Organocatalyzed Asymmetric Conjugate Addition of Alcohols to β-Fluoroalkyl Vinylsulfones by Bifunctional Phosphonium Salt Catalyst

Chiral secondary alcohols, serving as essential structural motifs, hold significant potential for diverse applications. The exploration of effective synthetic strategies toward these compounds is both attractive and challenging. Herein, we present an asymmetric oxa-Michael reaction involving aliphatic alcohols as nucleophiles and β-fluoroalkyl vinylsulfones catalyzed by bifunctional phosphonium salt (BPS), achieving high yields and excellent enantioselectivities (up to 98 % yield and 98 % ee). Additionally, a sequential process including asymmetric oxa-Michael and debenzylation, facilitated by BPS/Lewis acid cooperation, was revealed for synthesizing diverse chiral secondary alcohol compounds in high yields (81-88 %) with consistent stereoselectivities. Furthermore, mechanistic explorations and subsequent results unveiled that the enantioselectivity originates from hydrogen-bonding and ion-pair interactions between the BPS catalyst and the substrates.

Synthesis of Sterically Hindered Dialkyl Ethers via Palladium-Catalyzed Fluoro-alkoxylation of gem-Difluoroalkenes

Organofluorine compounds are of high value in medicinal and agricultural chemistry. Herein, we report a palladium-catalyzed fluoro-alkoxylation of gem-difluoroalkenes for the synthesis of much more challenging sterically hindered ethers. This reaction represents a direct synthesis method for α-trifluoromethyl ethers with a broad functional group tolerance and excellent regioselectivity. This system employs N-fluorobenzenesulfonimide (NFSI) as an electrophilic fluorine source and alcohols as nucleophilic donors, including but not limited to sterically hindered tert-substituted alcohols.

The development of cage phosphine 'DalPhos' ligands to enable nickel-catalyzed cross-couplings of (hetero)aryl electrophiles

Nickel-catalyzed cross-couplings of (hetero)aryl electrophiles with a diversity of nucleophiles (nitrogen, oxygen, carbon, and others) have evolved into competitive alternatives to well-established palladium- and copper-based protocols for the synthesis of (hetero)aryl products, including (hetero)anilines and (hetero)aryl ethers. A survey of the literature reveals that the use of cage phosphine (CgP) 'DalPhos' (DALhousie PHOSphine) bisphosphine-type ligands operating under thermal conditions currently offers the most broad substrate scope in nickel-catalyzed cross-couplings of this type, especially involving (hetero)aryl chlorides and phenol-derived electrophiles. The development and application of these DalPhos ligands is described in a ligand-specific manner that is intended to serve as a guide for the synthetic chemistry end-user.

Photo-Induced Generation of Oxygenated Quaternary Centers via EnT Enabled Singlet O2 Addition to C3-Maleimidated Quinoxaline: A Reagent-Less Approach

Demonstrated here is an external photo-sensitizer-free (auto-sensitized) singlet oxygen-enabled solvent-dependent tertiary hydroxylation and aryl-alkyl spiro-etherification of C3-maleimidated quinoxalines. Such "reagent-less" photo-oxygenation at Csp3-H and etherification involving Csp3-H/Csp2-H are unparalleled. Possibly, the highly π-conjugated N-H tautomer allows the substrate to get excited by irradiation, and subsequently, it attains the triplet state via ISC. This excited triplet-state sensitized molecule then transfers its energy to a triplet-state oxygen (3O2) generating reactive singlet oxygen (1O2) for hydroxylation and spirocyclization depending on the solvent used. In HFIP, the generated alkoxy radical accepts a proton via HAT giving hydroxylated product. In contrast, in an aprotic PhCl it underwent a radical addition at the ortho-position of the C2 aryl to provide spiro-ether. An unprecedented orthogonal spiro-etherification was observed via the displacement of o-substitutents for ortho (-OEt, -OMe, -F, -Cl, -Br) substituted substrates. The order of ipso substitution follows the trend -OMe>-OEt>-F>-H>-Cl>-Br. Both these oxygenation reactions can be carried out with nearly equal ease using direct sunlight without the requirement of any elaborate reaction setup. Demonstration of large-scale synthesis and a few interesting transformations have also been realized. Furthermore, several insightful control experiments and quantum chemical computations were performed to unravel the mechanism.

Alcohols as Substrates in Transition-Metal-Catalyzed Arylation, Alkylation, and Related Reactions

Alcohols are abundant and attractive feedstock molecules for organic synthesis. Many methods for their functionalization require them to first be converted into a more activated derivative, while recent years have seen a vast increase in the number of complexity-building transformations that directly harness unprotected alcohols. This Review discusses how transition metal catalysis can be used toward this goal. These transformations are broadly classified into three categories. Deoxygenative functionalizations, representing derivatization of the C-O bond, enable the alcohol to act as a leaving group toward the formation of new C-C bonds. Etherifications, characterized by derivatization of the O-H bond, represent classical reactivity that has been modernized to include mild reaction conditions, diverse reaction partners, and high selectivities. Lastly, chain functionalization reactions are described, wherein the alcohol group acts as a mediator in formal C-H functionalization reactions of the alkyl backbone. Each of these three classes of transformation will be discussed in context of intermolecular arylation, alkylation, and related reactions, illustrating how catalysis can enable alcohols to be directly harnessed for organic synthesis.

Room-Temperature Copper-Catalyzed Etherification of Aryl Bromides

We disclose the development of a Cu-catalyzed C-O coupling method utilizing a new N1,N2-diarylbenzene-1,2-diamine ligand, L8. Under optimized reaction conditions, structurally diverse aryl and heteroaryl bromides underwent efficient coupling with a variety of alcohols at room temperature using an L8-based catalyst. Notably, the L8-derived catalyst exhibited enhanced activity when compared to the L4-based system previously disclosed for C-N coupling, namely the ability to functionalize aryl bromides containing acidic functional groups. Mechanistic studies demonstrate that C-O coupling utilizing L8 ⋅ Cu involves rate-limiting alkoxide transmetallation, resulting in a mechanism of C-O bond formation that is distinct from previously described Pd-, Cu-, or Ni-based systems. This lower energy pathway leads to rapid C-O bond formation; a 7-fold increase relative to what is seen with other ligands. The results presented in this report overcome limitations in previously described C-O coupling methods and introduce a new ligand that we anticipate may be useful in other Cu-catalyzed C-heteroatom bond-forming reactions.

Total Syntheses of Borolithochromes A, D and G

Total syntheses of borolithochromes A, D and G, red pigments isolated from fossils of Jurassic putative red alga Solenopora jurassica, have been achieved. The benzo[gh]tetraphene skeletons of the borate ligands in these substances were constructed using Diels-Alder reactions of aryl dienes with naphthoquinone, followed by intramolecular Corey-Chaykovsky reactions. Complexation of these ligands with trimethyl borate generated homocomplexes, which upon sequential O-demethylation produced borolithochromes A and G. In the route to borolithochrome D, a heterocomplex was prepared by stepwise complexation of the ligands with 2-(dimethylamino)ethyl dimethyl borate. The strategy devised to accomplish the first total synthesis of borolithochromes A, D and G should be applicable to the preparation of other borolithochromes as well as spiroborates possessing two fused polycyclic aromatic ligands.

Hydroxylation of Aryl Sulfonium Salts for Phenol Synthesis under Mild Reaction Conditions

Hydroxylation of aryl sulfonium salts could be realized by utilizing acetohydroxamic acid and oxime as hydroxylative agents in the presence of cesium carbonate as a base, leading to a variety of structurally diverse hydroxylated arenes in 47-95% yields. In addition, the reaction exhibited broad functionality tolerance, and a range of important functional groups (e.g., cyano, nitro, sulfonyl, formyl, keto, and ester) could be well amenable to the mild reaction conditions.

Bicyclopentylation of Alcohols with Thianthrenium Reagents

Herein we present the first method for the synthesis of bicyclo[1.1.1]pentyl (BCP) alkyl ethers from alcohols. The reaction uses BCP-thianthrenium reagents and is catalyzed by a dual copper/photoredox catalyst system. Unlike known alkylations of tertiary alcohols via carbocation intermediates, our Cu-mediated radical process circumvents the labile BCP carbocations. The approach demonstrates a broad tolerance for functional groups when applied to primary, secondary, and even tertiary alcohols. In addition, we highlight the utility of this method in late-stage functionalizations of both natural products and pharmaceuticals as well as in the rapid construction of BCP analogs of known pharmaceuticals that would otherwise be difficult to access.

Eco-Friendly Homo- and Cross-Etherification of Benzyl Alcohols Catalyzed by Iron(II/III) Chloride in Propylene Carbonate as a Green and Recyclable Solvent

A new catalytic approach toward the symmetrical and nonsymmetrical etherification of benzyl alcohols was developed. The symmetrical etherification reaction was carried out in the presence of FeCl3·6H2O (5 mol %) as the catalyst and propylene carbonate as a green and recyclable solvent and led to the corresponding symmetrical ethers in 53 to 91% yields. The nonsymmetrical etherification of benzylic alcohols was achieved by using FeCl2·4H2O (10 mol %) in the presence of a pyridine bis-thiazoline ligand (12 mol %) and allowed for high selectivity and in 52 to 89% yields. These methods take advantage of eco-friendly conditions.

Emerging Trends in Copper-Promoted Radical-Involved C-O Bond Formations

The C-O bond is ubiquitous in biologically active molecules, pharmaceutical agents, and functional materials, thereby making it an important functional group. Consequently, the development of C-O bond-forming reactions using catalytic strategies has become an increasingly important research topic in organic synthesis because more conventional methods involving strong base and acid have many limitations. In contrast to the ionic-pathway-based methods, copper-promoted radical-mediated C-O bond formation is experiencing a surge in research interest owing to a renaissance in free-radical chemistry and photoredox catalysis. This Perspective highlights and appraises state-of-the-art techniques in this burgeoning research field. The contents are organized according to the different reaction types and working models.

Photoredox catalysis harvesting multiple photon or electrochemical energies

Photoredox catalysis (PRC) is a cutting-edge frontier for single electron-transfer (SET) reactions, enabling the generation of reactive intermediates for both oxidative and reductive processes via photon activation of a catalyst. Although this represents a significant step towards chemoselective and, more generally, sustainable chemistry, its efficacy is limited by the energy of visible light photons. Nowadays, excellent alternative conditions are available to overcome these limitations, harvesting two different but correlated concepts: the use of multi-photon processes such as consecutive photoinduced electron transfer (conPET) and the combination of photo- and electrochemistry in synthetic photoelectrochemistry (PEC). Herein, we review the most recent contributions to these fields in both oxidative and reductive activations of organic functional groups. New opportunities for organic chemists are captured, such as selective reactions employing super-oxidants and super-reductants to engage unactivated chemical feedstocks, and scalability up to gram scales in continuous flow. This review provides comparisons between the two techniques (multi-photon photoredox catalysis and PEC) to help the reader to fully understand their similarities, differences and potential applications and to therefore choose which method is the most appropriate for a given reaction, scale and purpose of a project.

Nickel-Carbon Bond Oxygenation with Green Oxidants via High-Valent Nickel Species

Described herein is the synthesis of the Ni^II complex (^tBuMe₂tacn)Ni^II(cycloneophyl) (^tBuMe₂tacn = 1-tert-butyl-4,7-dimethyl-1,4,7-triazacyclononane, cycloneophyl = -CH₂CMe₂-o-C₆H₄-) and its reactivity with dioxygen and peroxides. The new ^tBuMe₂tacn ligand is designed to enhance the oxidatively induced bond-forming reactivity of high-valent Ni intermediates. Tunable chemoselectivity for Csp²-O vs Csp²-Csp³ bond formation was achieved by selecting the appropriate solvent and reaction conditions. Importantly, the use of cumene hydroperoxide and meta-chloroperbenzoic acid suggests a heterolytic O-O bond cleavage upon reaction with (^tBuMe₂tacn)Ni^II(cycloneophyl). Mechanistic studies using isotopically labeled H₂O₂ support the generation of a high-valent Ni-oxygen species via an inner-sphere mechanism and subsequent reductive elimination to form the Csp²-O bond. Kinetic studies of the exceptionally fast Csp²-O bond-forming reaction reveal a first-order dependence on both (^tBuMe₂tacn)Ni^II(cycloneophyl) and H₂O₂, and thus an overall second-order reaction. Eyring analysis further suggests that the oxidation of the Ni^II complex by H₂O₂ is the rate-determining step, which can be modulated by the presence of coordinating solvents. Moreover, computational studies fully support the conclusions drawn from experimental results. Overall, this study reveals for the first time the ability to control the oxidatively induced C-C vs C-O bond formation reactions at a Ni center. Importantly, the described system merges the known organometallic reactivity of Ni with the biomimetic oxidative transformations resembling oxygenases and peroxidases, and involving high-valent metal-oxygen intermediates, which is a novel approach that should lead to unprecedented oxidative catalytic transformations.

Palladium-Catalyzed Chemoselective Oxygenation of C(sp2)-H and C(sp3)-H Bonds in Isatins

The palladium-catalyzed chemoselective C(sp²)-H and C(sp³)-H bond oxygenation of substituted isatin derivatives is reported. This mild protocol exhibits the C5 C(sp²)-H oxygenation of isatins through electrophilic intermolecular C-H palladation in concentrated solutions using PhI(OAc)₂ or Selectfluor as an oxidant, whereas it exhibits-N-CH₃ C(sp³)-H oxygenation in dilute solutions via carbonyl-assisted intramolecular palladation in the presence of K₂S₂O₈. This oxygenation reaction provides a direct and unified approach for synthesizing diverse oxygenated isatins with sensitive functionalities, including biorelevant compounds.

Utilization of Aryl(TMP)iodonium Salts for Copper-Catalyzed N-Arylation of Isatoic Anhydrides: An Avenue to Fenamic Acid Derivatives and N,N'-Diarylindazol-3-ones

Herein, we report a general method for copper-catalyzed N-arylation of isatoic anhydrides with unsymmetrical iodonium salts at room temperature. The developed catalytic protocol is mild and operationally simple, and aryl(TMP)iodonium trifluoroacetate is employed as the arylating partner. The methodology offers the broad applicability of both structurally and electronically diverse aryl groups from aryl(TMP)iodonium salts to access N-arylated isatoic anhydrides in moderate to excellent yields (53-92%). Moreover, the substituted isatoic anhydrides are equally compatible with the protocol too. To demonstrate the synthetic utilities of the N-arylation process, we also report an alternative approach for biologically relevant fenamic acid derivatives and N,N'-diarylindazol-3-ones in a one-pot step economical system. In addition, the scale-up synthesis of flufenamic acid is also illustrated.

Palladium-catalysed site-selective arene ortho C-H fluoroalkoxylation of 4-aryl-pyrrolo[2,3-d]pyrimidines

A palladium-catalysed direct arene C-H fluoroalkoxylation of 4-aryl-pyrrolo[2,3-d]pyrimidine derivatives with fluorinated alcohols is described. Highly site-selective mono- or bis-fluoroalkoxylation can be achieved by tuning the reaction conditions, affording various fluoroalkoxylated pyrrolo[2,3-d]pyrimidine derivatives in moderate to good yields, which offer rational tailoring of their biological activity for their application in the field of pharmaceutical chemistry.

Synthesis of Aryl-methylene Ethers through Pd(0)-Catalyzed Coupling between Hydrobenzoxazoles and Dichloromethane

Using dichloromethane (DCM) as the C1 feedstock, the first Pd(0)-catalyzed synthesis of aryl-methylene ether motifs from hydrobenzoxazoles (hydrothiazoles) has been reported. This protocol has exhibited an ample substrate scope (38 examples) and wide functional group tolerance. Aryl-methylene ether adducts have been successfully engaged in coupling with isocyanate to provide bis-iminoisoindolinones. In this reaction, DCM has served as a twofold electrophile for reaction with hydrobenzoxazoles via double C-Cl bond cleavage.

Transition Metal-Catalyzed C-H Functionalization Through Electrocatalysis

Electrochemically promoted transition metal-catalyzed C-H functionalization has emerged as a promising area of research over the last few decades. However, development in this field is still at an early stage compared to traditional functionalization reactions using chemical-based oxidizing agents. Recent reports have shown increased attention on electrochemically promoted metal-catalyzed C-H functionalization. From the standpoint of sustainability, environmental friendliness, and cost effectiveness, electrochemically promoted oxidation of a metal catalyst offers a mild, efficient, and atom-economical alternative to traditional chemical oxidants. This Review discusses advances in the field of transition metal-electrocatalyzed C-H functionalization over the past decade and describes how the unique features of electricity enable metal-catalyzed C-H functionalization in an economic and sustainable way.

Anaerobic Hydroxylation of C(sp3)-H Bonds Enabled by the Synergistic Nature of Photoexcited Nitroarenes

A photoexcited-nitroarene-mediated anaerobic C-H hydroxylation of aliphatic systems is reported. The success of this reaction is due to the bifunctional nature of the photoexcited nitroarene, which serves as the C-H bond activator and the oxygen atom source. Compared to previous methods, this approach is cost- and atom-economical due to the commercial availability of the nitroarene, the sole mediator of the reaction. Because of the anaerobic conditions of the transformation, a noteworthy expansion in substrate scope can be obtained compared to prior reports. Mechanistic studies support that the photoexcited nitroarenes engage in successive hydrogen atom transfer and radical recombination events with hydrocarbons, leading to N-arylhydroxylamine ether intermediates. Spontaneous fragmentation of these intermediates leads to the key oxygen atom transfer products.

Stereoselective Construction of Tertiary Homoallyl Alcohols and Ethers by Nucleophilic Substitution at Quaternary Carbon Stereocenters

An efficient method for the stereoselective construction of tertiary C-O bonds via a stereoinvertive nucleophilic substitution at the quaternary carbon stereocenter of cyclopropyl carbinol derivatives using water, alcohols and phenols as nucleophiles has been developed. This substitution reaction proceeds under mild conditions and tolerates several functional groups, providing a new access to the stereoselective formation of highly congested tertiary homoallyl alcohols and ethers.

Transition-metal-catalyzed C-H bond activation as a sustainable strategy for the synthesis of fluorinated molecules: an overview

The last decade has witnessed the emergence of innovative synthetic tools for the synthesis of fluorinated molecules. Among these approaches, the transition-metal-catalyzed functionalization of various scaffolds with a panel of fluorinated groups (XR_F, X = S, Se, O) offered straightforward access to high value-added compounds. This review will highlight the main advances made in the field with the transition-metal-catalyzed functionalization of C(sp²) and C(sp³) centers with SCF₃, SeCF₃, or OCH₂CF₃ groups among others, by C-H bond activation. The scope and limitations of these transformations are discussed in this review.

Ni(I)-Catalyzed Hydroxylation of Aryl Halides with Water under Thermal Catalysis

A highly efficient hydroxylation of (hetero)aryl halides using water as a hydroxyl source via Ni catalysis promoted by PhSiH₃ under thermal catalysis is reported. This methodology provides a general procedure to obtain diverse multifunctional pharmaceutically phenols and polyphenols, some of which are proven challenging to be synthesized using literature methods. Mechanism studies demonstrated that the addition of PhSiH₃ led to the generation of active Ni(I) species, which catalyze the hydroxylation via a Ni(I)-Ni(III) pathway.

Recent Advances in Alkenyl sp2 C-H and C-F Bond Functionalizations: Scope, Mechanism, and Applications

Alkenes and their derivatives are featured widely in a variety of natural products, pharmaceuticals, and advanced materials. Significant efforts have been made toward the development of new and practical methods to access this important class of compounds by selectively activating the alkenyl C(sp²)-H bonds in recent years. In this comprehensive review, we describe the state-of-the-art strategies for the direct functionalization of alkenyl sp² C-H and C-F bonds until June 2022. Moreover, metal-free, photoredox, and electrochemical strategies are also covered. For clarity, this review has been divided into two parts; the first part focuses on currently available alkenyl sp² C-H functionalization methods using different alkene derivatives as the starting materials, and the second part describes the alkenyl sp² C-F bond functionalization using easily accessible gem-difluoroalkenes as the starting material. This review includes the scope, limitations, mechanistic studies, stereoselective control (using directing groups as well as metal-migration strategies), and their applications to complex molecule synthesis where appropriate. Overall, this comprehensive review aims to document the considerable advancements, current status, and emerging work by critically summarizing the contributions of researchers working in this fascinating area and is expected to stimulate novel, innovative, and broadly applicable strategies for alkenyl sp² C-H and C-F bond functionalizations in the coming years.

Microwave-Assisted Cu-Catalyzed Diaryletherification for Facile Synthesis of Bioactive Prenylated Diresorcinols

Prenylated diresorcinols exhibit various bioactivities, including cytotoxic, antibacterial, and antifungal activities. Therefore, establishing facile and efficient synthetic routes for prenylated diresorcinols facilitates their development as chemical probes or drugs with a novel mode of action. In this study, microwave-assisted copper catalysis was explored as a cost-effective and environmentally friendly method for the cross-coupling of sterically hindered ortho-prenylated phenols and aryl halides to produce bioactive prenylated diresorcinols, diorcinol I and leotiomycene B. Notable advantages of microwave-assisted catalysis include not only operational simplicity and rapid heating but also shorter reaction times and higher chemical yields. In addition, highly regioselective prenylation of phenol was achieved for the preparation of ortho-prenyl phenol via directed lithiation and subsequent alkylation. This study provides valuable insights for the preparation of other bioactive prenylated diresorcinols. Furthermore, considering that prenylated benzenoids are biosynthetic precursors of various polycyclic natural products, this synthetic route could be expanded to more complex bioactive compounds possessing diaryl ethers.

Ligand-Enabled C-H Hydroxylation with Aqueous H2O2 at Room Temperature

With the large number of Pd(II)-catalyzed C-H activation reactions of native substrates developed in the past decade, the development of catalysts to enable the use of green oxidants under safe and practical conditions has become an increasingly important challenge. Notably, the compatibility of Pd(II) catalysts with sustainable aqueous H2O2 has been a long-standing challenge in catalysis including Wacker-type oxidations. We report herein a bifunctional bidentate carboxyl-pyridone (CarboxPyridone) ligand that enables room-temperature Pd-catalyzed C-H hydroxylation of a broad range of benzoic and phenylacetic acids with an industry-compatible oxidant, aqueous hydrogen peroxide (35% H2O2). The scalability of this methodology is demonstrated by a 1000 mmol scale reaction of ibuprofen (206 g) using only a 1 mol % Pd catalyst loading. The utility of this protocol is further illustrated through derivatization of the products and synthesis of polyfluorinated natural product coumestan and pterocarpene from phenol intermediates prepared using this methodology.

HFIP in Organic Synthesis

1,1,1,3,3,3-Hexafluoroisopropanol (HFIP) is a polar, strongly hydrogen bond-donating solvent that has found numerous uses in organic synthesis due to its ability to stabilize ionic species, transfer protons, and engage in a range of other intermolecular interactions. The use of this solvent has exponentially increased in the past decade and has become a solvent of choice in some areas, such as C-H functionalization chemistry. In this review, following a brief history of HFIP in organic synthesis and an overview of its physical properties, literature examples of organic reactions using HFIP as a solvent or an additive are presented, emphasizing the effect of solvent of each reaction.

Palladium catalyzed radical relay for the oxidative cross-coupling of quinolines

Traditional approaches for transition-metal catalyzed oxidative cross-coupling reactions rely on sp²-hybridized starting materials, such as aryl halides, and more specifically, homogeneous catalysts. We report a heterogeneous Pd-catalyzed radical relay method for the conversion of a heteroarene C(sp³)–H bond into ethers. Pd nanoparticles are supported on an ordered mesoporous composite which, when compared with microporous activated carbons, greatly increases the Pd d charge because of their strong interaction with N-doped anatase nanocrystals. Mechanistic studies provide evidence that electron-deficient Pd with Pd–O/N coordinations efficiently catalyzes the radical relay reaction to release diffusible methoxyl radicals, and highlight the difference between this surface reaction and C–H oxidation mediated by homogeneous catalysts that operate with cyclopalladated intermediates. The reactions proceed efficiently with a turn-over frequency of 84 h⁻¹ and high selectivity toward ethers of >99%. Negligible Pd leaching and activity loss are observed after 7 catalytic runs.

Traditional approaches for transition-metal catalyzed oxidative cross-coupling reactions rely on sp²-hybridized starting materials. Here the authors report a heterogeneous Pd-catalyzed radical relay method for the conversion of a heteroarene C(sp³)–H bond into ethers.

Branching out: redox strategies towards the synthesis of acyclic α-tertiary ethers

Acyclic α-tertiary ethers represent a highly prevalent functionality, common to high-value bioactive molecules, such as pharmaceuticals and natural products, and feature as crucial synthetic handles in their construction. As such their synthesis has become an ever-more important goal in synthetic chemistry as the drawbacks of traditional strong base- and acid-mediated etherifications have become more limiting. In recent years, the generation of highly reactive intermediates via redox approaches has facilitated the synthesis of highly sterically-encumbered ethers and accordingly these strategies have been widely applied in α-tertiary ether synthesis. This review summarises and appraises the state-of-the-art in the application of redox strategies enabling acyclic α-tertiary ether synthesis.

Organocatalytic Synthesis of Phenols from Diaryliodonium Salts with Water under Metal-Free Conditions

The metal-free synthesis of phenols from diaryliodonium salts with water was developed by using N-benzylpyridin-2-one as an organocatalyst. In this process, sterically congested, functionalized, and heterocycle-containing iodonium salts were smoothly converted to the desired products, and the clofibrate and mecloqualone derivatives were also synthesized in high yields. In addition, the gram-scale experiment was successfully carried out with 10 mmol of a sterically congested substrate.

Hydrodechlorination of Aryl Chlorides Under Biocompatible Conditions

Developing nonenzymatic chemistry that is nontoxic to microbial organisms creates the potential to integrate synthetic chemistry with metabolism and offers new remediation strategies. Chlorinated organic compounds known to bioaccumulate and cause harmful environmental impact can be converted into less damaging derivatives through hydrodehalogenation. The hydrodechlorination of substituted aryl chlorides using Pd/C and ammonium formate in biological media under physiological conditions (neutral pH, moderate temperature, and ambient pressure) is reported. The reaction conditions were successful for a range of aryl chlorides with electron-donating and -withdrawing groups, limited by the solubility of substrates in aqueous media. Soluble substrates gave good yields (60-98%) of the reduction product within 48 h. The relative toxicities of each reaction component were tested separately and together against bacteria, and the reaction proceeded in bacterial cultures containing an aryl chloride with robust cell growth. This work offers an initial step toward the removal of aryl chlorides from waste streams that currently use bacterial degradation to remove pollutants.

Iridium-catalyzed reductive etherification of α,β-unsaturated ketones and aldehydes with alcohols

An iridium complex-catalyzed reductive etherification of α,β-unsaturated ketones and aldehydes with primary alcohols is presented, affording allyl ethers in excellent yields. Deuterated and control experiments showed that this etherification transformation proceeded through a cascade transfer hydrogenation and alcohol condensation process. Moreover, the utility of this protocol is evidenced by the gram-scale performance.