Complexes of a Noncyclic Carbazole-based N5-donor Schiff base: Structures, Redox, EPR and Poor Activity as Hydrogen Evolution Electrocatalysts

A new noncyclic pentadentate N5-donor Schiff-base ligand, HL2Etpyr (1,1'-(3,6-ditert-butyl-9H-carbazole-1,8-diyl)bis(N-(2-(pyridin-2-yl)ethyl)methanimine)), prepared from 1,8-diformyl-3,6-ditertbutyl-carbazole (HUtBu) and two equivalents of 2-(2-pyridyl)ethylamine, along with four tetrafluoroborate complexes, [MIIL2Etpyr](BF4), where M = Co, Ni, Cu, and Zn, and two [CoIIL2EtPyr]·1/2[CoIIX4] complexes where X = NCS or Cl, isolated as solvates, are reported. All six complexes were structurally characterized, revealing the cations to be isostructural, with M(II) in a trigonal bipyramidal N5-donor environment. Only the Zn(II) complex is fluorescent. Cyclic voltammograms of [MIIL2Etpyr](BF4) in MeCN reveal reversible redox processes at positive potentials: 0.61 (Zn), 0.62 (Cu), 0.57 (Ni), and 0.25 V (Co), and for the cobalt complex a second quasi-reversible process occurs at 0.92 V vs Fc+/Fc. EPR data for the first oxidation product clearly demonstrate that the Zn complex undergoes a ligand centered oxidation, and support this being the case for the Ni and Cu complexes, although this is not definitively shown. After both oxidations the EPR data shows that the Co complex is best described as a low spin Co(III)-ligand radical. In the presence of 80 mM acetic acid, controlled potential electrolysis carried out on [MIIL2Etpyr](BF4) at -1.68 V in MeCN shows some electrocatalytic hydrogen evolution reaction (HER) performance in the order Ni(II) > Cu(II) > Co(II) - but the control, Ni(II) tetrafluoroborate, is more active than all three of the complexes.

Electrocatalytic Hydrogen Evolution of Immobilized Copper Complex on Carbonaceous Materials: From Neutral Water to Seawater

Electrochemical hydrogen evolution reaction (HER) is an appealing strategy to utilize renewable electricity to produce green H2. Moreover, use of neutral-pH electrolyte such as water and seawater for the HER has long been desired for eco-friendly energy production that aligns with net zero emission goal. Herein, new heterogeneous catalysts were developed by dispersing an HER-active copper complex containing N4-Schiff base macrocycle (CuL) on carbonaceous materials, i. e. multi-walled carbon nanotube (CNT) and graphene oxide (GO), via non-covalent interaction and investigated their HER performance. It was found that CuL/GO exhibited higher HER activity than CuL/CNT, possibly due to its significantly larger amount of CuL immobilized onto GO. In addition, CuL/GO showed satisfactory HER performance in a neutral (pH 7) NaCl electrolyte solution. Notably, the performances of CuL/GO were boosted up when performed in natural seawater sample with the faradaic efficiency of 70 % and 3 times higher amount of H2 at -0.6 V vs reversible hydrogen electrode (RHE), in comparison to the HER in a NaCl electrolyte. Furthermore, it possessed a low overpotential of 139 mV at -10 mA/cm2. This demonstrated the potential use of CuL/GO as an effective HER catalyst in seawater for further sustainable development.

Copper-based electrocatalyst for hydrogen evolution in water

In aqueous pH 7 phosphate buffer, during controlled potential electrolysis (CPE) at -1.10 V vs. Ag|AgCl the literature square planar copper complex, [CuIILEt]BF4 (1), forms a heterogeneous deposit on the glassy carbon working electrode (GCWE) that is a stable and effective hydrogen evolution reaction (HER) electrocatalyst. Specifically, CPE for 20 hours using a small GCWE (A = 0.071 cm2) gave a turnover number (TON) of 364, with ongoing activity. During CPE the brownish-yellow colour of the working solution fades, and a deposit is observed on the small GCWE. Repeating this CPE experiment in a larger cell with a larger GCWE (A = 2.7 cm2), connected to a gas chromatograph, resulted in a TON of 2628 after 2.6 days, with FE = 93%, and with activity ongoing. After this CPE, the working solution had faded to nearly colourless, and visual inspection of the large GCWE showed a material had deposited on the surface. In a 'rinse and repeat test', this heterogeneous deposit was used for further CPE, in a freshly prepared working solution minus fresh catalyst, which resulted in similar ongoing HER activity to before, consistent with the surface deposited material being the active HER catalyst. EDS, PXRD and SEM analysis of this deposit shows that copper and oxygen are the main components present, most likely comprising copper and copper(I) oxide ((Cu2O)n) formed from 1. The use of 1 leads to a deposit that is more catalytically active than that formed when starting with a simple copper salt (control), likely due to it forming a more robustly attached deposit, which also enables the observed long-lived catalytic activity.

Molecularly dispersed nickel complexes on N-doped graphene for electrochemical CO2 reduction

In this work, new hybrid catalysts based on molecularly dispersed nickel complexes on N-doped graphene were developed for electrochemical CO2 reduction (ECR). Nickel(II) complexes (1-Ni, 2-Ni), and a new crystal structure ([2-Ni]Me), featuring N4-Schiff base macrocycles, were synthesized and investigated for their potential in ECR. Cyclic voltammetry (CV) in NBu4PF6/CH3CN solution demonstrated that the nickel complexes bearing N-H groups (1-Ni and 2-Ni) showed a substantial current enhancement in the presence of CO2, while the absence of N-H groups ([2-Ni]Me) resulted in an almost unchanged voltammogram. This indicated the necessity of the N-H functionality towards ECR in aprotic media. All three nickel complexes were successfully immobilized on nitrogen-doped graphene (NG) via non-covalent interactions. All three Ni@NG catalysts exhibited satisfactory CO2-to-CO reduction in aqueous NaHCO3 solution with the faradaic efficiency (FE) of 60-80% at the overpotential of 0.56 V vs. RHE. The ECR activity of [2-Ni]Me@NG also suggested that the N-H moiety from the ligand is less important in the heterogeneous aqueous system owing to viable hydrogen-bond formation and proton donors from water and bicarbonate ions. This finding could pave the way for understanding the effects of modifying the ligand framework at the N-H position toward fine tuning the reactivity of hybrid catalysts through molecular-level modulation.

Mono-copper far more active than analogous di-copper complex for electrocatalytic hydrogen evolution

The di-copper(II) analogue, [CuII2(bis-LEt)](BF4)2 (2), of the previously reported mono-copper(II) complex [CuIILEt]BF4 (1) which resulted in long lived electrocatalytic hydrogen evolution reaction (HER), has been prepared, characterised and tested for...

Electroactive Metal Complexes Covalently Attached to Conductive PEDOT Films: A Spectroelectrochemical Study

The successful covalent attachment, via copper(I)-catalyzed azide alkyne cycloaddition (CuAAC), of alkyne-functionalized nickel(II) and copper(II) macrocyclic complexes onto azide (N₃)-functionalized poly(3,4-ethylenedioxythiophene) (PEDOT) films on ITO-coated glass electrodes is reported. To investigate the surface attachment of the selected metal complexes, which are analogues of the cobalt-based complex previously reported to be a molecular catalyst for hydrogen evolution, first, three different PEDOT films were formed by electropolymerization of pure PEDOT or pure N₃-PEDOT, and last, 1:2N₃-PEDOT:PEDOT were formed by co-polymerizing a 1:4 mixture of N₃-EDOT:EDOT monomers. The successful surface immobilization of the complexes on the latter two azide-functionalized films, by CuAAC, was confirmed by X-ray photoelectron spectroscopy (XPS) and electrochemistry as well as by UV-vis-NIR and resonance Raman spectroelectrochemistry. The ratio between the N₃ groups, and hence, the number of surface-attached metal complexes after CuAAC functionalization, in pristine N₃-PEDOT versus 1:2N₃-PEDOT:PEDOT is expected to be 3:1 and seen to be 2.86:1 with a calculated surface coverage of 3.28 ± 1.04 and 1.15 ± 0.09 nmol/cm², respectively. The conversion, to the metal complex attached films, was lower for the N₃-PEDOT films (Ni 74%, Cu 76%) than for the copolymer 1:2N₃-PEDOT:PEDOT films (Ni 83%, Cu 91%) due to the former being more sterically congested. The Raman and UV-vis-NIR results were simulated using density functional theory (DFT) and time-dependent DFT (TD-DFT), respectively, and showed good agreement with the experimental data. Importantly, the spectroelectrochemical behavior of both anchored metal complexes is analogous to that of the free metal complexes in solution. This proves that PEDOT films are promising conducting scaffolds for the covalent immobilization of metal complexes, as the existing electrochromic features of the complexes are preserved on immobilization, which is important for applications in electrocatalytic proton and carbon dioxide reduction, optoelectronics, and sensing.

Copper catalysts for photo- and electro-catalytic hydrogen production

Square planar 1, square pyramidal 2 and trigonal bipyramidal 3 copper complexes are poor catalysts for hydrogen evolution (HER) under photocatalytic conditions, whereas 1 is, or forms, a good and enduring electrocatalyst for HER, but 2 and 3 do not.

A theoretical insight into non-covalent supramolecular interactions in the solid state structures of two octahedral iron(iii) complexes

The nature and characteristics of the C–H⋯π interactions that play an important role in crystal packing of two iron(iii) complexes have been discussed. The DFT calculations have been conducted to determine the interaction energies in these complexes.

Structural investigation of a new cadmium coordination compound prepared by sonochemical process: Crystal structure, Hirshfeld surface, thermal, TD-DFT and NBO analyses

A new nanostructured cadmium complex containing a tridentate Schiff base ligand was sonochemically synthesized and characterized by XRPD, FT/IR, NMR, and single crystal X-ray crystallography. Structural data showed that cadmium(II) ion is surrounded by three nitrogen atoms of Schiff base ligand and two iodide anions. The crystal packing was contained the intermolecular interactions such as CH⋯O, CH⋯I and π⋯π interactions organizing the self-assembly process. Hirshfeld surfaces and corresponding fingerprint plots have been used for investigation of the nature and proportion of interactions in the crystal packing. FT/IR, NMR and XRD data were in agreement with the X-ray structure and confirm the phase purity of the prepared sample. The molecular structure of the complex was optimized by density functional theory (DFT) calculation at the B3LYP/LANL2DZ level of theory and the results were compared with experimental ones. For more concise study of structure and spectral aspects of the complex, natural bond orbital (NBO) analysis and time-dependent density functional theory (TD-DFT) have been also performed. Thermal stability of the cadmium iodide complex was investigated by thermogravimetric analysis (TGA). Finally, cadmium oxide nanoparticles was prepared by direct calcination of CdLI₂ complex as a new precursor.

Three Manganese Complexes of Anionic N4-Donor Schiff-Base Macrocycles: Monomeric MnII and MnIII, and dimeric MnIV

Three manganese macrocyclic complexes of two anionic N4-donor [1+1] Schiff-base macrocycles that differ in ring size (14 versus 16 membered), HLEt and HLPr (obtained from condensation of diphenylamine-2,2′-dicarboxaldehyde and either diethylenetriamine or dipropylenetriamine), are reported. Specifically, a pair of monomeric complexes MnIILEt(NCS)(H2O) and [MnIIILPr(NCS)2]·0.5H2O, plus a dimeric complex [MnIV2LEt2(O)2](ClO4)2·3DMF have been synthesised and characterised. Single crystal structure determinations on [MnIIILPr(NCS)2]·0.5H2O and [MnIV2LEt2(O)2](ClO4)2·3DMF revealed octahedral manganese centres in both cases: N6-coordinated Jahn–Teller distorted MnIII in the former and a pair of N4O2-coordinated MnIV in the latter. UV-Vis, IR, and electron paramagnetic resonance spectroscopy as well as magnetic measurements are reported. These macrocyclic complexes feature a simple and original design, and could find future uses as models for manganese catalase or as building blocks for the assembly of larger supramolecular architectures.

Improved Access to 1,8-Diformyl-carbazoles Leads to Metal-Free Carbazole-Based [2 + 2] Schiff Base Macrocycles with Strong Turn-On Fluorescence Sensing of Zinc(II) Ions

Development of a new and high yielding synthetic route to 1,8-diformyl-carbazoles 3 (3a 3,6-di- tert-butyl substituted; 3b 3,6-unsubstituted) is reported. Use of a Heck coupling reaction, followed by ozonolysis, has greatly facilitated the preparation of these interesting head units in useful quantities. An initial foray into the new generations of Schiff base macrocycles that ready access to these head units (3) opens up, has led to the direct (i.e., metal-free) synthesis of two [2 + 2] macrocycles from 3a or 3b with 1,2-diaminoethane, H₂L^tBu (4a) and H₂L^H (4b), respectively, obtained as yellow powders in high yields (87-88%). The dizinc complex [Zn₂L^H(OAc)₂] (5b) was isolated as a bright yellow solid in 83% yield, by 1:2:2 reaction of H₂L^H with zinc(II) acetate and triethylamine. Aldehydes 3a and 3b, macrocycle H₂L^H, and complex [Zn₂L^H(OAc)₂] (5b) have been structurally characterized. The carbazole NH makes bifurcated hydrogen bonds with the pair of flanking 1,8-diformyl-moieties in 3, or 1,8-diimine-moieties in H₂L^H, leading to a flat, all- cis conformation. The stepped conformation of the metal-free macrocycle H₂L^H is retained in [Zn₂L^H(OAc)₂], despite deprotonation and binding of two zinc(II) centers within the two tridentate pockets. The N₃O₂ coordination of the zinc ions is completed by one μ_1,1- and one μ_1,3- bridging acetate anion. Excitation of nanomolar [Zn₂L^H(OAc)₂] in DMF at 335 nm results in clearly visible blue fluorescence (λ_max = 460 nm). Further studies on the H₂L^H macrocycle revealed turn-on fluorescence, with selectivity (over Ca²⁺, Mg²⁺ and a range of 3d dications) and nanomolar sensitivity for zinc(II) ions, highlighting one of the many potential applications for these new carbazole-based Schiff base macrocycles.

Carbazole-based N4-donor Schiff base macrocycles: obtained metal free and as Cu(ii) and Ni(ii) complexes

Practical multi-step routes to 1,8-diformylcarbazole head units, and the first examples of Schiff base macrocycles derived from them, are reported. Like porphyrins, both macrocycles are shown to impose a strong ligand field.

Synthesis, X-ray crystal structures and thermal analyses of some new antimicrobial zinc complexes: New configurations and nano-size structures

Some new five coordinated ZnLX2 complexes, where L is N3-Schiff base ligand obtained by condensation reaction between diethylenetriamine and (E)-3-(2-nitrophenyl)acrylaldehyde and X (Cl(-), Br(-), I(-), N3(-) and NCS(-)), were synthesized and characterized by FT-IR, (1)H and (13)CNMR, UV-visible, ESI-mass spectra and molar conductivity measurements. The structures of zinc iodide and thiocyanate complexes were determined by X-ray crystallographic analysis. The X-ray results showed that the Zn (II) center in these complexes is five-coordinated in a distorted trigonal-bipyramidal configuration. Zinc iodide and thiocyanate complexes crystallize in the monoclinic and triclinic systems with space groups of C2/c and P1- with eight and two molecules per unit cell respectively. The crystal packing of the complexes consists of intermolecular interactions such as C-H(…)O and C-H(…)I, C-H(···)S, N(…)O, together with π-π stacking and some other unexpected interactions. The mentioned interactions cause three-dimensional supramolecular structure in the solid state. Zinc complexes were also prepared in nano-structure by sonochemical method confirmed by XRD, SEM and TEM analyses. Moreover, ZnO nanoparticles were synthesized by direct thermolysis of zinc iodide complex. Furthermore, antimicrobial and thermal properties of the compounds were completely investigated.

Macrocyclic Dizinc(II) Alkyl and Alkoxide Complexes: Reversible CO2 Uptake and Polymerization Catalysis Testing

The synthesis of three new dizinc(II) complexes bearing a macrocyclic [2 + 2] Schiff base ligand is reported. The bis(anilido)tetraimine macrocycle reacts with diethylzinc to form a bis(ethyl)dizinc(II) complex, [L(Et)Zn2Et2] (1). The reaction of complex 1 with isopropyl alcohol is reported, forming a bis(isopropyl alkoxide)dizinc complex, [L(Et)Zn2((i)PrO)2] (2). Furthermore, complex 1, with 2 equiv of alcohol, is applied as an initiator for racemic lactide ring-opening polymerization. It shows moderately high activity, resulting in a pseudo-first-order rate coefficient of 9.8 × 10(-3) min(-1), with [LA] = 1 M and [initiator] = 5 mM at 25 °C and in a tetrahydrofuran solvent. Polymerization occurs with good control, as evidenced by the linear fit to a plot of molecular weight versus conversion, the narrow dispersities, and the limited transesterification. The same initiating system is inactive for the ring-opening copolymerization of carbon dioxide (CO2) and cyclohexene oxide at 80 °C and 1 bar of CO2 pressure. However, stoichiometric reactions between complex 2 and CO2, at 1 bar pressure, result in the reversible formation of new dizinc carbonate species, [L(Et)Zn2((i)PrO)((i)PrOCO2)] (3a) and [L(Et)Zn2((i)PrOCO2)2] (3b), and the reaction was studied using density functional theory calculations. All of the new complexes, 1-3b, are fully characterized, including NMR spectroscopy, elemental analysis, and single-crystal X-ray diffraction.

Synthesis, spectral identification, electrochemical behavior and theoretical investigation of new zinc complexes of bis((E) 3-(2-nitrophenyl)-2-propenal)propane-1,2-diimine

Synthesis, spectroscopic, electrochemical behavior and theoretical investigation of some zinc complexes of a new Schiff base ligand of bis((E) 3-(2-nitrophenyl)-2-propenal)propane-1,2-diimine (L) with a general formula of ZnLX(2)(X=Cl(-), Br(-), I(-), SCN(-) and N(3)(-)) are described. The ligand and its complexes were identified by elemental analysis, molar conductivity, UV-Visible spectra, FT-IR spectra, (1)H NMR and (13)C NMR spectra. The complexes were found to be molecular and non-electrolyte based on conductivity measurement. The spectral data confirm coordination of ligand and anions(X(-)) to zinc ion center. Electrochemical behavior of ligand and complexes were investigated by cyclic voltammetry technique exhibiting different redox behavior of complexes with respect to free ligand so that the ligand and complexes showed quasi-reversible and irreversible electron transfer processes respectively. Molecular structures of the ligand and complexes have been optimized at the UB3LYP/LANL2MB(*) level of theory. Accordingly some theoretical thermodynamical and/or structural parameters such as HF-energy, Gibbs free energy, enthalpy, selected bond distances, bond angles and torsion angles of optimized structures are presented.