Innovative Insights into Water-Oxidation Mechanism: Investigating Birnessite's Reaction with Cerium(IV) Ammonium Nitrate

Developing Mn-based water-oxidation reaction (WOR) catalysts is key for renewable energy storage, utilizing Mn's abundance, cost-effectiveness, and natural role. Cerium(IV) ammonium nitrate (CAN) has been widely utilized as a sacrificial oxidant in the exploration of WOR catalysts. In this study, advanced techniques, such as X-ray absorption spectroscopy (XAS), in situ Raman spectroscopy, and in situ electron paramagnetic resonance (EPR), to delve into the WOR facilitated by CAN and birnessite were employed. XANES analysis has demonstrated that the average oxidation states (AOSs) of Mn in birnessite, a birnessite/CAN mixture, and in the birnessite/CAN mixture postwater addition are 3.7, 3.8, and 3.9, respectively. In situ Raman spectroscopy performed in the presence of birnessite and CAN revealed a distinct peak at 784 cm-1, which is attributed to Mn(IV)═O. A shift of this peak to 769 cm-1 in H218O confirms its association with Mn(IV)═O. No change in this peak was observed in D2O, further supporting the notion that it is linked to Mn(IV)═O rather than Mn-OH (D). Furthermore, EPR spectroscopy shows the presence of Mn(IV). It is suggested that the WOR mechanism initiates with the oxidation of birnessite by CAN, which enhances the concentration of Mn(IV) sites in the birnessite structure. Under acidic conditions, birnessite, enriched in Mn(IV), facilitates oxygen evolution and subsequently transitions into a form with reduced Mn(IV) levels. This process highlights the critical function of the Mn (hydr)oxide structure, similar to its role in the water-oxidizing complex of Photosystem II, where it serves as charge storage for oxidizing equivalents from CAN, paving the way for a four-electron reaction that drives the WOR.

Evolution in the Design of Water Oxidation Catalysts with Transition-Metals: A Perspective on Biological, Molecular, Supramolecular, and Hybrid Approaches

Increased demand for a carbon-neutral sustainable energy scheme augmented by climatic threats motivates the design and exploration of novel approaches that reserve intermittent solar energy in the form of chemical bonds in molecules and materials. In this context, inspired by biological processes, artificial photosynthesis has garnered significant attention as a promising solution to convert solar power into chemical fuels from abundantly found H2O. Among the two redox half-reactions in artificial photosynthesis, the four-electron oxidation of water according to 2H2O → O2 + 4H+ + 4e- comprises the major bottleneck and is a severe impediment toward sustainable energy production. As such, devising new catalytic platforms, with traditional concepts of molecular, materials and biological catalysis and capable of integrating the functional architectures of the natural oxygen-evolving complex in photosystem II would certainly be a value-addition toward this objective. In this review, we discuss the progress in construction of ideal water oxidation catalysts (WOCs), starting with the ingenuity of the biological design with earth-abundant transition metal ions, which then diverges into molecular, supramolecular and hybrid approaches, blurring any existing chemical or conceptual boundaries. We focus on the geometric, electronic, and mechanistic understanding of state-of-the-art homogeneous transition-metal containing molecular WOCs and summarize the limiting factors such as choice of ligands and predominance of environmentally unrewarding and expensive noble-metals, necessity of high-valency on metal, thermodynamic instability of intermediates, and reversibility of reactions that create challenges in construction of robust and efficient water oxidation catalyst. We highlight how judicious heterogenization of atom-efficient molecular WOCs in supramolecular and hybrid approaches put forth promising avenues to alleviate the existing problems in molecular catalysis, albeit retaining their fascinating intrinsic reactivities. Taken together, our overview is expected to provide guiding principles on opportunities, challenges, and crucial factors for designing novel water oxidation catalysts based on a synergy between conventional and contemporary methodologies that will incite the expansion of the domain of artificial photosynthesis.

Research on engineered electrocatalysts for efficient water splitting: a comprehensive review

Water electrolysis plays an interesting role toward hydrogen generation for overcoming global environmental crisis and solving the energy storage problem. However, there is still a deficiency of efficient electrocatalysts to overcome sluggish kinetics for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). Great efforts have been employed to produce potential catalysts with low overpotential, rapid kinetics, and excellent stability for HER and OER. At present, hydrogen economy is driven by electrocatalysts with excellent characteristics; thus, systematic design strategy has become the driving force to exploit earth-abundant transition metal-based electrocatalysts toward H₂ economy. In this review, the recent progress on newer materials including metals, alloys, and transition metal oxides (manganese oxides, cobalt oxides, nickel oxides, PBA-derived metal oxides, and metal complexes) as photocatalysts/electrocatalysts has been overviewed together with some methodologies for efficient water splitting. Metal-organic framework (MOF)-based electrocatalysts have been highly exploited owing to their interesting functionalities. The photovoltaic-electrocatalytic (PV-EC) process focused on harvesting high solar-to-hydrogen efficiency (STH) among various solar energy conversion as well as storage systems. Electrocatalysts/photocatalysts with high efficiency have become an urgent need for overall water splitting. Also, cutting-edge achievements in the fabrication of electrocatalysts along with theoretical consideration have been discussed.

Dual enzymes-mimic activity of nanolayered manganese-calcium oxide for fluorometric determination of metformin

There are different analytical methods available for the determination of metformin, as an oral hypoglycemic and antidiabetic drug, in biological samples. However, most of these methods suffer from some drawbacks, including high-priced materials and equipment, damaging chemical reagents, time-consuming nature, and tedious operation procedures. So, in this work a new, sensitive and simple method was reported for the detection of metformine. In this regard, nanolayered manganese-calcium oxide (NL-MnCaO₂) were synthesized and characterized using scanning electron microscopy (SEM), fourier transform infrared (FTIR) spectroscopy, and X-ray powder diffraction (XRD) techniques. Also, we studied the enzyme-like activity of synthesized particles and reported a bifunctional nanozyme, which performs the dual roles for peroxidase and catalase-mimicking. The results demonstrated the hindering effect of metformin on the peroxidase-mimic activity of NL-MnCaO₂ and this effect was increased by raising metformin concentration. So, a sensitive fluorometric detection system was designed for the analytical assay of metformin, based on the terephthalic acid (TA)-H₂O₂ reaction with NL-MnCaO₂. An acceptable linearity was observed between the metformin concentration and fluorescence quenching of the system in the range of 0.07-0.77 mM. Limit of detection (LOD) and limit of quantification (LOQ) were 0.17 μM and 0.96 μM, respectively. The proposed system was applied for the estimation of metformin concentration in serum samples by recoveries of 86.68-106%. So, the proposed fluorometric method provides some main advantages such as wide linear range, low detection limit, rapid detections, high sensitivity, and good practicability for the determination of metformin in biological samples.

Efficient solid-state synthesis of biomineralized vaterite-derived pure CaMnO3 perovskite for effective photocatalysis

Biomineralized vaterite-based synthesis of the perovskite CaMnO₃ for effective photocatalytic dye degradation.

An ultrasensitive label-free colorimetric biosensor for the detection of glucose based on glucose oxidase-like activity of nanolayered manganese-calcium oxide

During the last years, enzyme-based biosensors have gained much more attention among the researchers and have had great success in the determination of different biological macromolecules. Nanomaterials with intrinsic enzyme-mimic activity are widely used in biomedicine as artificial enzymes. Here, we report glucose oxidase-mimic activity of nanolayered manganese-calcium (Mn-Ca) oxide nanoparticles (NL-MnCaO₂). In this work, NL-MnCaO₂nanoparticles were synthesized and characterized using different techniques including transmission electron microscopy (TEM), scanning electron microscopy (SEM), fourier-transform infrared spectroscopy (FTIR) and powder X-ray diffraction (XRD). Also, the ability of these compounds for the glucose and hydrogen peroxide (H₂O₂) determination was investigated. A non-enzymatic strategy for the colorimetric detection of glucose and H₂O₂ was reported which can be utilized not only for the rapid detection and analysis of glucose by the naked eye but also the quantitative assay of glucose by spectrophotometry. The in situ generated H₂O₂ and gluconic acid (GA) from the oxidation of glucose through the glucose oxidase-mimicking activity of NL-MnCaO₂ was detected using a colorimetric method. Also, the results confirmed the application of these compounds for the detection of glucose in human serum samples with a detection limit (LOD) of 6.12 × 10^-6 M. The results showed that NL-MnCaO₂ can be used as an alternative for the natural enzymes and act as a simple, sensitive and enzyme-free biosensor for the detection of glucose in real samples. The proposed strategy shows some advantages including sensitivity, short detection time and low detection limit.

Research Advances of Amorphous Metal Oxides in Electrochemical Energy Storage and Conversion

Amorphous metal oxides (AMOs) have aroused great enthusiasm across multiple energy areas over recent years due to their unique properties, such as the intrinsic isotropy, versatility in compositions, absence of grain boundaries, defect distribution, flexible nature, etc. Here, the materials engineering of AMOs is systematically reviewed in different electrochemical applications and recent advances in understanding and developing AMO-based high-performance electrodes are highlighted. Attention is focused on the important roles that AMOs play in various energy storage and conversion technologies, such as active materials in metal-ion batteries and supercapacitors as well as active catalysts in water splitting, metal-air batteries, and fuel cells. The improvements of electrochemical performance in metal-ion batteries and supercapacitors are reviewed regarding the enhancement in active sites, mechanical strength, and defect distribution of amorphous structures. Furthermore, the high electrochemical activities boosted by AMOs in various fundamental reactions are elaborated on and they are related to the electrocatalytic behaviors in water splitting, metal-air batteries, and fuel cells. The applications in electrochromism and high-conducting sensors are also briefly discussed. Finally, perspectives on the existing challenges of AMOs for electrochemical applications are proposed, together with several promising future research directions.

Architecture of Biomimetic Water Oxidation Catalyst with Mn4CaO5 Clusterlike Structure Unit

Mn₄CaO₅ cluster in green plant is considered as the ideal structure for water oxidation catalysis. However, this structure is difficult to be constructed in heterogeneous catalyst because of its distorted spatial structure and unique electronic state. Herein, we report the synthesis of two-dimensional biomimetic Ca-Mn-O catalyst with Mn₄CaO₅ clusterlike structure through ultrasonic-assisted reduction treatment toward Ca-birnessite. The synergistic effect between ultrasonic and reduction successfully reduced the Mn oxidation state in Ca-birnessite without breaking the structure of MnO₂ monolayers, forming a regular two-dimensional structure with Mn₄CaO₅ cubanelike structure unit for the first time. The biomimetic catalyst shows a superior water oxidation activity (turnover frequency = 3.43 s^-1), which is the best in manganese-based heterogeneous catalyst to date. This work provides a new strategy for the precise synthesis of specific structure and exhibits a great prospect of biomimic in heterogeneous catalyst.

Nanolayered manganese oxides: insights from inorganic electrochemistry

The electrochemistry of nanolayered Mn oxides in the presence of LiClO₄ at pH = 6.3 under different conditions was studied.

Manganese Compounds as Water-Oxidizing Catalysts: From the Natural Water-Oxidizing Complex to Nanosized Manganese Oxide Structures

All cyanobacteria, algae, and plants use a similar water-oxidizing catalyst for water oxidation. This catalyst is housed in Photosystem II, a membrane-protein complex that functions as a light-driven water oxidase in oxygenic photosynthesis. Water oxidation is also an important reaction in artificial photosynthesis because it has the potential to provide cheap electrons from water for hydrogen production or for the reduction of carbon dioxide on an industrial scale. The water-oxidizing complex of Photosystem II is a Mn-Ca cluster that oxidizes water with a low overpotential and high turnover frequency number of up to 25-90 molecules of O2 released per second. In this Review, we discuss the atomic structure of the Mn-Ca cluster of the Photosystem II water-oxidizing complex from the viewpoint that the underlying mechanism can be informative when designing artificial water-oxidizing catalysts. This is followed by consideration of functional Mn-based model complexes for water oxidation and the issue of Mn complexes decomposing to Mn oxide. We then provide a detailed assessment of the chemistry of Mn oxides by considering how their bulk and nanoscale properties contribute to their effectiveness as water-oxidizing catalysts.

Catalytic Activity and Impedance Behavior of Screen-Printed Nickel Oxide as Efficient Water Oxidation Catalysts

We report that films screen printed from nickel oxide (NiO) nanoparticles and microballs are efficient electrocatalysts for water oxidation under near-neutral and alkaline conditions. Investigations of the composition and structure of the screen-printed films by X-ray diffraction, X-ray absorption spectroscopy, and scanning electron microscopy confirmed that the material was present as the cubic NiO phase. Comparison of the catalytic activity of the microball films to that of films fabricated by using NiO nanoparticles, under similar experimental conditions, revealed that the microball films outperform nanoparticle films of similar thickness owing to a more porous structure and higher surface area. A thinner, less-resistive NiO nanoparticle film, however, was found to have higher activity per Ni atom. Anodization in borate buffer significantly improved the activity of all three films. X-ray photoelectron spectroscopy showed that during anodization, a mixed nickel oxyhydroxide phase formed on the surface of all films, which could account for the improved activity. Impedance spectroscopy revealed that surface traps contribute significantly to the resistance of the NiO films. On anodization, the trap state resistance of all films was reduced, which led to significant improvements in activity. In 1.00 m NaOH, both the microball and nanoparticle films exhibit high long-term stability and produce a stable current density of approximately 30 mA cm(-2) at 600 mV overpotential.

The effect of lanthanum(III) and cerium(III) ions between layers of manganese oxide on water oxidation

Manganese oxide structure with lanthanum(III) or cerium(III) ions between the layers was synthesized by a simple method. The ratio of Mn to Ce or La in samples was 0.00, 0.04, 0.08, 0.16, 0.32, 0.5, 0.82, or 1.62. The compounds were characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction studies, and atomic absorption spectroscopy. The compounds show efficient catalytic activity of water oxidation in the presence of cerium(IV) ammonium nitrate with a turnover frequency of 1.6 mmol O2/mol Mn.s. In contrast to the water-oxidizing complex in Photosystem II, calcium(II) has no specific role to enhance the water-oxidizing activity of the layered manganese oxides and other cations can be replaced without any significant decrease in water-oxidizing activities of these layered Mn oxides. Based on this and previously reported results from oxygen evolution in the presence of H 2 (18) O, we discuss the mechanism and the important factors influencing the water-oxidizing activities of the manganese oxides.

Manganese oxides supported on gold nanoparticles: new findings and current controversies for the role of gold

We synthesized manganese oxides supported on gold nanoparticles (diameter <100 nm) by the reaction of KMnO4 with gold nanoparticles under hydrothermal conditions. In this green method Mn oxide is deposited on the gold nanoparticles. The compounds were characterized by scanning electron microscopy, energy-dispersive spectrometry, high-resolution transmission electron microscopy, X-ray diffraction, UV-Vis spectroscopy, Fourier transform infrared spectroscopy, and atomic absorption spectroscopy. In the next step, the water-oxidizing activities of these compounds in the presence of cerium(IV) ammonium nitrate as a non-oxo transfer oxidant were studied. The results show that these compounds are good catalysts toward water oxidation with a turnover frequency of 1.0 ± 0.1 (mmol O2/(mol Mn·s)). A comparison with other previously reported Mn oxides and important factors influencing the water-oxidizing activities of Mn oxides is also discussed.

A very simple and high-yield method to synthesize nanolayered Mn oxide

Nanolayered Mn oxides have been prepared by a very simple, low-cost and high-yield method using soap, KOH, MnCl2 and H2O2. Scanning electron microscopy, transmission electron microscopy, dynamic light scattering, thermogravimetric analysis, Fourier transform infrared spectroscopy, and X-ray diffraction spectrometry have been used to characterize the phase and the morphology of the nanolayered Mn oxide. The nanolayered Mn oxide shows good catalytic activity toward water oxidation in the presence of cerium(iv) ammonium nitrate.

Nanolayered manganese oxide/C(60) composite: a good water-oxidizing catalyst for artificial photosynthetic systems

For the first time, we considered Mn oxide/C60 composites as water-oxidizing catalysts. The composites were synthesized by easy and simple procedures, and characterized by some methods. The water-oxidizing activities of these composites were also measured in the presence of cerium(iv) ammonium nitrate. We found that the nanolayered Mn oxide/C60 composites show promising activity toward water oxidation.

Nanostructured manganese oxide/carbon nanotubes, graphene and graphene oxide as water-oxidizing composites in artificial photosynthesis

Herein, we report on nano-sized Mn oxide/carbon nanotubes, graphene and graphene oxide as water-oxidizing compounds in artificial photosynthesis. The composites are synthesized by different and simple procedures and characterized by a number of methods. The water-oxidizing activities of these composites are also considered in the presence of cerium(IV) ammonium nitrate. Some composites are efficient Mn-based catalysts with TOF (mmol O2 per mol Mn per second) ~ 2.6.

Uncovering structure-activity relationships in manganese-oxide-based heterogeneous catalysts for efficient water oxidation

Artificial photosynthesis by harvesting solar light into chemical energy could solve the problems of energy conversion and storage in a sustainable way. In nature, CO2 and H2 O are transformed into carbohydrates by photosynthesis to store the solar energy in chemical bonds and water is oxidized to O2 in the oxygen-evolving center (OEC) of photosystem II (PS II). The OEC contains CaMn4 O5 cluster in which the metals are interconnected through oxido bridges. Inspired by biological systems, manganese-oxide-based catalysts have been synthesized and explored for water oxidation. Structural, functional modeling, and design of the materials have prevailed over the years to achieve an effective and stable catalyst system for water oxidation. Structural flexibility with eg(1) configuration of Mn(III) , mixed valency in manganese, and higher surface area are the main requirements to attain higher efficiency. This Minireview discusses the most recent progress in heterogeneous manganese-oxide-based catalysts for efficient chemical, photochemical, and electrochemical water oxidation as well as the structural requirements for the catalyst to perform actively.

Nano-sized Mn3O4 and β-MnOOH from the decomposition of β-cyclodextrin-Mn: 2. The water-oxidizing activities

Nano-sized Mn oxides contain Mn3O4, β-MnOOH and Mn2O3 have been prepared by a previously reported method using thermal decomposition of β-cyclodextrin-Mn complexes. In the next step, the water-oxidizing activities of these Mn oxides using cerium(IV) ammonium nitrate as a chemical oxidant are studied. The turnover frequencies for β-MnO(OH) and Mn3O4 are 0.24 and 0.01-0.17 (mmol O2/mol Mns), respectively. Subsequently, water-oxidizing activities of these compounds are compared to the other previously reported Mn oxides. Important factors affecting water oxidation by these Mn oxides are also discussed.

Gold nanorods or nanoparticles deposited on layered manganese oxide: new findings

Our results show that nano-sized gold has no significant effect on the water-oxidation activity of the Mn oxide phase in the presence of Ce(iv).

Nano-sized Mn oxides on halloysite or high surface area montmorillonite as efficient catalysts for water oxidation with cerium(iv) ammonium nitrate: support from natural sources

We used halloysite, a nano-sized natural mineral and high surface area montmorillonite as supports for nano-sized Mn oxides to synthesize efficient water-oxidising catalysts.

Visible light promoted photocatalytic water oxidation: effect of metal oxide catalyst composition and light intensity

Simply prepared low-cost nanoparticulate transition metal oxides were used as catalysts in visible light promoted water oxidations. The activity using daylight equivalent light intensities was assessed.

Self-healing for nanolayered manganese oxides in the presence of cerium(iv) ammonium nitrate: new findings

We used multivariate chemometrics methods to analyze the concentration profiles of cerium(iv) ammonium nitrate and MnO₄⁻during the water oxidation reaction.

A nano-sized manganese oxide in a protein matrix as a natural water-oxidizing site

The purpose of this review is to present recent advances in the structural and functional studies of water-oxidizing center of Photosystem II and its surrounding protein matrix in order to synthesize artificial catalysts for production of clean and efficient hydrogen fuel.

Synthetic cluster models of biological and heterogeneous manganese catalysts for O2 evolution

Artificial photosynthesis has emerged as an important strategy toward clean and renewable fuels. Catalytic oxidation of water to O2 remains a significant challenge in this context. A mechanistic understanding of currently known heterogeneous and biological catalysts at a molecular level is highly desirable for fundamental reasons as well as for the rational design of practical catalysts. This Award Article discusses recent efforts in synthesizing structural models of the oxygen-evolving complex of photosystem II. These structural motifs are also related to heterogeneous mixed-metal oxide catalysts. A stepwise synthetic methodology was developed toward achieving the structural complexity of the targeted active sites. A geometrically restricted multinucleating ligand, but with labile coordination modes, was employed for the synthesis of low-oxidation-state trimetallic species. These precursors were elaborated to site-differentiated tetrametallic complexes in high oxidation states. This methodology has allowed for structure-reactivity studies that have offered insight into the effects of different components of the clusters. Mechanistic aspects of oxygen-atom transfer and incorporation from water have been interrogated. Significantly, a large and systematic effect of redox-inactive metals on the redox properties of these clusters was discovered. With the pKa value of the redox-inactive metal-aqua complex as a measure of the Lewis acidity, structurally analogous clusters display a linear dependence between the reduction potential and acidity; each pKa unit shifts the potential by ca. 90 mV. Implications for the function of the biological and heterogeneous catalysts are discussed.

Water exchange in manganese-based water-oxidizing catalysts in photosynthetic systems: from the water-oxidizing complex in photosystem II to nano-sized manganese oxides

The water-oxidizing complex (WOC), also known as the oxygen-evolving complex (OEC), of photosystem II in oxygenic photosynthetic organisms efficiently catalyzes water oxidation. It is, therefore, responsible for the presence of oxygen in the Earth's atmosphere. The WOC is a manganese-calcium (Mn₄CaO₅(H₂O)₄) cluster housed in a protein complex. In this review, we focus on water exchange chemistry of metal hydrates and discuss the mechanisms and factors affecting this chemical process. Further, water exchange rates for both the biological cofactor and synthetic manganese water splitting are discussed. The importance of fully unveiling the water exchange mechanism to understand the chemistry of water oxidation is also emphasized here. This article is part of a special issue entitled: photosynthesis research for sustainability: keys to produce clean energy.

Nano-sized layered manganese oxide in a poly-L-glutamic acid matrix: a biomimetic, homogenized, heterogeneous structural model for the water-oxidizing complex in photosystem II

Here, we report a nano-sized layered Mn–Ca oxide in poly-L-glutamic acid as a structural model for a biological water-oxidizing site in plants, algae and cyanobacteria.

Mn oxide/nanodiamond composite: a new water-oxidizing catalyst for water oxidation

Herein, we reported nanosized Mn oxide/nanodiamond composites as water-oxidizing compounds.

Nanolayered manganese oxides as water-oxidizing catalysts: the effects of Cu(ii) and Ni(ii) ions

We synthesized nanolayered manganese oxides in the presence of copper(ii) or nickel(ii) ions, and considered the water oxidizing activities of them.

Gold or silver deposited on layered manganese oxide: a functional model for the water-oxidizing complex in photosystem II

In this report, gold or silver deposited on layered manganese oxide has been synthesized by a simple method and characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction spectrometry, atomic absorption spectroscopy, and energy-dispersive X-ray mapping. The gold deposited on layered manganese oxide showed efficient catalytic activity toward water oxidation in the presence of cerium(IV) ammonium nitrate. The properties associated with this compound suggest it is a functional model for the water-oxidizing complex in photosystem II.

A 2-(2-hydroxyphenyl)-1H-benzimidazole-manganese oxide hybrid as a promising structural model for the tyrosine 161/histidine 190-manganese cluster in photosystem II

In this communication, we report the synthesis, characterization, and electrochemistry of a 2-(2-hydroxyphenyl)-1H-benzimidazole-manganese oxide hybrid. Our results suggest that this compound is a promising model for the manganese cluster together with tyrosine-161 and histidine-190 in photosystem II of plants, algae and cyanobacteria.

Energetic basis of catalytic activity of layered nanophase calcium manganese oxides for water oxidation

Previous measurements show that calcium manganese oxide nanoparticles are better water oxidation catalysts than binary manganese oxides (Mn3O4, Mn2O3, and MnO2). The probable reasons for such enhancement involve a combination of factors: The calcium manganese oxide materials have a layered structure with considerable thermodynamic stability and a high surface area, their low surface energy suggests relatively loose binding of H2O on the internal and external surfaces, and they possess mixed-valent manganese with internal oxidation enthalpy independent of the Mn(3+)/Mn(4+) ratio and much smaller in magnitude than the Mn2O3-MnO2 couple. These factors enhance catalytic ability by providing easy access for solutes and water to active sites and facile electron transfer between manganese in different oxidation states.