Diiron Complexes with Rigid and Conjugated S-to-S Bridges for Electrocatalytic Reduction of CO2

Electroreduction of CO2 to value-added low-carbon chemicals is a promising way for carbon neutrality and CO2 utilization. It was found that the diiron complex [(μ-bdt)Fe2(CO)6] (bdt = benzene-1,2-dithiolate) has high catalytic activity for electrocatalytic CO2 reduction. To further study the effect of the S-to-S bridge on the catalytic performances of diiron complexes for electrochemical CO2 reduction, four diiron complexes 1-4 with different rigid and conjugated S-to-S bridges were either selected or designed. The electrocatalytic studies showed that under optimal conditions, 2 with a 2,3-naphthalenedithiolato bridge exhibited the lowest catalytic onset potential (Eonset = -1.75 V vs Fc+/0), while 4 with a diphenyl-1,2-vinylidene bridge displayed the highest catalytic activity (TOFmax = 295 s-1), which is 1.5 times that of [(μ-bdt)Fe2(CO)6]. The controlled potential electrolysis experiments of 4 in 0.1 M MeOH/MeCN at -2.35 V vs Fc+/0 gave a total faradaic yield close to 100%, with selectivities of 77%, 9%, and 14% for HCOOH, CO, and H2, respectively. The mechanism for CO2 reduction was studied using density functional theory, IR spectroelectrochemistry, and electrochemical methods. The results indicate that modifying the structure of the S-to-S bridge is an effective strategy to improve the catalytic performance of diiron complexes for electrocatalytic CO2 reduction.

Heteropolymetallic [FeFe]-Hydrogenase Mimics: Synthesis and Electrochemical Properties

The synthesis and electrochemical properties of tetranuclear [Fe2S2]-hydrogenase mimic species containing Pt(II), Ni(II), and Ru(II) complexes have been studied. To this end, a new tetranuclear [Fe2S2] complex containing a 5,5'-diisocyanide-2,2'-bipyridine bridging ligand has been designed and coordinated to the metal complexes through the bipyridine moiety. Thus, the tetranuclear [Fe2S2] complex (6) coordinates to Pt(II), Ni(II) and Ru(II) yielding the corresponding metal complexes. The new metal center in the bipyridine linker modulates the electronic communication between the redox-active [Fe2S2] units. Thus, electrochemical studies and DFT calculations have shown that the presence of metal complexes in the structure strongly affect the electronic communication between the [Fe2S2] centers. In the case of diphosphine platinum compounds 10, the structure of the phosphine ligand plays a crucial role to facilitate or to hinder the electronic communication between [Fe2S2] moieties. Compound 10a, bearing a dppe ligand, shows weak electronic communication (ΔE = 170 mV), whereas the interaction is much weaker in the Pt-dppp derivative 10b (ΔE = 80 mV) and virtually negligible in the Pt-dppf complex 10c. The electronic communication is facilitated by incorporation of a Ru-bis(bipyridine) complex, as observed in the BF4 salt 12 (ΔE = 210 mV) although the reduction of the [FeFe] centers occurs at more negative potentials. Overall, the experimental-computational procedure used in this work allows us to study the electronic interaction between the redox-active centers, which, in turn, can be modulated by a transition metal.

Non-Covalent Integration of a [FeFe]-Hydrogenase Mimic to Multiwalled Carbon Nanotubes for Electrocatalytic Hydrogen Evolution

Surface integration of molecular catalysts inspired from the active sites of hydrogenase enzymes represents a promising route towards developing noble metal-free and sustainable technologies for H₂ production. Efficient and stable catalyst anchoring is a key aspect to enable this approach. Herein, we report the preparation and electrochemical characterization of an original diironhexacarbonyl complex including two pyrene groups per catalytic unit in order to allow for its smooth integration, through π-interactions, onto multiwalled carbon nanotube-based electrodes. In this configuration, the grafted catalyst could reach turnover numbers for H₂ production (TON_H2 ) of up to 4±2×10³ within 20 h of bulk electrolysis, operating at neutral pH. Post operando analysis of catalyst functionalized electrodes revealed the degradation of the catalytic unit occurred via loss of the iron carbonyl units, while the anchoring groups and most part of the ligand remained attached onto multiwalled carbon nanotubes.

Alkali Metal Adducts of an Iron(0) Complex and Their Synergistic FLP-Type Activation of Aliphatic C-X Bonds

We report the formation and full characterization of weak adducts between Li⁺ and Na⁺ cations and a neutral iron(0) complex, [Fe(CO)₃(PMe₃)₂] (1), supported by weakly coordinating [BAr^F₂₀] anions, [1·M][BAr^F₂₀] (M = Li, Na). The adducts are found to synergistically activate aliphatic C-X bonds (X = F, Cl, Br, I, OMs, OTf), leading to the formation of iron(II) organyl compounds of the type [FeR(CO)₃(PMe₃)₂][BAr^F₂₀], of which several were isolated and fully characterized. Stoichiometric reactions with the resulting iron(II) organyl compounds show that this system can be utilized for homocoupling and cross-coupling reactions and the formation of new C-E bonds (E = C, H, O, N, S). Further, we utilize [1·M][BAr^F₂₀] as a catalyst in a simple hydrodehalogenation reaction under mild conditions to showcase its potential use in catalytic reactions. Finally, the mechanism of activation is probed using DFT and kinetic experiments that reveal that the alkali metal and iron(0) center cooperate to cleave C-X via a mechanism closely related to intramolecular FLP activation.

[FeFe]-Hydrogenases: maturation and reactivity of enzymatic systems and overview of biomimetic models

[FeFe]-hydrogenases recieved increasing interest in the last decades. This review summarises important findings regarding their enzymatic reactivity as well as inorganic models applied as electro- and photochemical catalysts.

Unraveling the mechanism of biomimetic hydrogen fuel production – a first principles molecular dynamics study

The Fe₂(bdt)(CO)₆ [bdt = benzenedithiolato] complex, a synthetic mimic of the [FeFe] hydrogenase enzyme can electrochemically convert protons into molecular hydrogen. The free energy landscape reveals a different mechanism for the biomimetic cycle.

A DFT study of structure and electrochemical properties of diiron-hydrogenase models with benzenedithiolato and benzenediselenato ligands

The chalcogen atom substitution in the Fe₂(bdt)(CO)₆ complex results in higher and lower proton affinities of iron and chalcogen atoms, respectively.

Direct Spectroscopic Detection of Key Intermediates and the Turnover Process in Catalytic H2 Formation by a Biomimetic Diiron Catalyst

[FeFe(Cl₂ -bdt)(CO)₆ ] (1; Cl₂ -bdt=3,6-dichlorobenzene-1,2-dithiolate), inspired by the active site of FeFe-hydrogenase, shows a chemically reversible 2 e^- reduction at -1.20 V versus the ferrocene/ferrocenium couple. The rigid and aromatic bdt bridging ligand lowers the reduction potential and stabilizes the reduced forms, compared with analogous complexes with aliphatic dithiolates; thus allowing details of the catalytic process to be characterized. Herein, time-resolved IR spectroscopy is used to provide kinetic and structural information on key catalytic intermediates. This includes the doubly reduced, protonated complex 1H^- , which has not been previously identified experimentally. In addition, the first direct spectroscopic observation of the turnover process for a molecular H₂ evolving catalyst is reported, allowing for straightforward determination of the turnover frequency.

Spectroscopic and theoretical investigation of the [Fe2(bdt)(CO)6] hydrogenase mimic and some catalyst intermediates

In [Fe–Fe] hydrogenase mimic systems the ene-1,2-dithiolene ligands play an important role in the stabilisation of the redox-active metal center.

Energy-Efficient Hydrogen Evolution by Fe-S Electrocatalysts: Mechanistic Investigations

The intrinsic catalytic property of a Fe-S complex toward H₂ evolution was investigated in a wide range of acids. The title complex exhibited catalytic events at -1.16 and -1.57 V (vs Fc⁺/Fc) in the presence of trifluoromethanesulfonic acid (HOTf) and trifluoroacetic acid (TFA), respectively. The processes corresponded to the single reduction of the Fe-hydride-S-proton and Fe-hydride species, respectively. When anilinium acid was used, the catalysis occurred at -1.16 V, identical with the working potential of the HOTf catalysis, although the employment of anilinium acid was only capable of achieving the Fe-hydride state on the basis of the spectral and calculated results. The thermodynamics and kinetics of individual steps of the catalysis were analyzed by density functional theory (DFT) calculations and electroanalytical simulations. The stepwise CCE or CE (C, chemical; E, electrochemical) mechanism was operative from the HOTf or TFA source, respectively. In contrast, the involvement of anilinium acid most likely initiated a proton-coupled electron transfer (PCET) pathway that avoided the disfavored intermediate after the initial protonation. Via the PCET pathway, the heterogeneous electron transfer rate was increased and the overpotential was decreased by 0.4 V in comparison with the stepwise pathways. The results showed that the PCET-involved catalysis exhibited substantial kinetic and thermodynamic advantages in comparison to the stepwise pathway; thus, an efficient catalytic system for proton reduction was established.

Interplay between Terminal and Bridging Diiron Hydrides in Neutral and Oxidized States

This study describes the structural, spectroscopic, and electrochemical properties of electronically unsymmetrical diiron hydrides. The terminal hydride Cp*Fe(pdt)Fe(dppe)(CO)H ([1(t-H)]⁰, Cp*^- = Me₅C₅^-, pdt^2- = CH₂(CH₂S^-)₂, dppe = Ph₂PC₂H₄PPh₂) was prepared by hydride reduction of [Cp*Fe(pdt)Fe(dppe)(CO)(NCMe)]⁺. As established by X-ray crystallography, [1(t-H)]⁰ features a terminal hydride ligand. Unlike previous examples of terminal diiron hydrides, [1(t-H)]⁰ does not isomerize to the bridging hydride [1(μ-H)]⁰. Oxidation of [1(t-H)]⁰ gives [1(t-H)]⁺, which was also characterized crystallographically as its BF₄^- salt. Density functional theory (DFT) calculations indicate that [1(t-H)]⁺ is best described as containing an Cp*Fe^III center. In solution, [1(t-H)]⁺ isomerizes to [1(μ-H)]⁺, as anticipated by DFT. Reduction of [1(μ-H)]⁺ by Cp₂Co afforded the diferrous bridging hydride [1(μ-H)]⁰. Electrochemical measurements and DFT calculations indicate that the couples [1(t-H)]^+/0 and [1(μ-H)]^+/0 differ by 210 mV. Qualitative measurements indicate that [1(t-H)]⁰ and [1(μ-H)]⁰ are close in free energy. Protonation of [1(t-H)]⁰ in MeCN solution affords H₂ even with weak acids via hydride transfer. In contrast, protonation of [1(μ-H)]⁰ yields 0.5 equiv of H₂ by a proposed protonation-induced electron transfer process. Isotopic labeling indicates that μ-H/D ligands are inert.

Catalyst accessibility to chemical reductants in metal-organic frameworks

This study of catalyst accessibility inside metal–organic frameworks demonstrates that pore dimensions, catalyst loadings, concentration of reductant, and reaction times all influence the proportion of catalysts within MOFs that engage in redox chemistry.

A molecular H₂-evolving catalyst, [Fe₂(cbdt)(CO)₆] ([FeFe], cbdt = 3-carboxybenzene-1,2-dithiolate), has been attached covalently to an amino-functionalized MIL-101(Cr) through an amide bond. Chemical reduction experiments reveal that the MOF channels can be clogged by ion pairs that are formed between the oxidized reductant and the reduced catalyst. This effect is lessened in MIL-101-NH-[FeFe] with lower [FeFe] loadings. On longer timescales, it is shown that large proportions of the [FeFe] catalysts within the MOF engage in photochemical hydrogen production and the amount of produced hydrogen is proportional to the catalyst loading.

Synthesis, Characterization, and Photocatalytic H2-Evolving Activity of a Family of [Co(N4Py)(X)](n+) Complexes in Aqueous Solution

A series of [Co(III)(N4Py)(X)](ClO4)n (X = Cl(-), Br(-), OH(-), N3(-), NCS(-)-κN, n = 2: X = OH2, NCMe, DMSO-κO, n = 3) complexes containing the tetrapyridyl N5 ligand N4Py (N4Py = 1,1-di(pyridin-2-yl)-N,N-bis(pyridin-2-ylmethyl)methanamine) has been prepared and fully characterized by infrared (IR), UV-visible, and NMR spectroscopies, high-resolution electrospray ionization mass spectrometry (HRESI-MS), elemental analysis, X-ray crystallography, and electrochemistry. The reduced Co(II) and Co(I) species of these complexes have been also generated by bulk electrolyses in MeCN and characterized by UV-visible and EPR spectroscopies. All tested complexes are catalysts for the photocatalytic production of H2 from water at pH 4.0 in the presence of ascorbic acid/ascorbate, using [Ru(bpy)3](2+) as a photosensitizer, and all display similar H2-evolving activities. Detailed mechanistic studies show that while the complexes retain the monodentate X ligand upon electrochemical reduction to Co(II) species in MeCN solution, in aqueous solution, upon reduction by ascorbate (photocatalytic conditions), [Co(II)(N4Py)(HA)](+) is formed in all cases and is the precursor to the Co(I) species which presumably reacts with a proton. These results are in accordance with the fact that the H2-evolving activity does not depend on the chemical nature of the monodentate ligand and differ from those previously reported for similar complexes. The catalytic activity of this series of complexes in terms of turnover number versus catalyst (TONCat) was also found to be dependent on the catalyst concentration, with the highest value of 230 TONCat at 5 × 10(-6) M. As revealed by nanosecond transient absorption spectroscopy measurements, the first electron-transfer steps of the photocatalytic mechanism involve a reductive quenching of the excited state of [Ru(bpy)3](2+) by ascorbate followed by an electron transfer from [Ru(II)(bpy)2(bpy(•-))](+) to the [Co(II)(N4Py)(HA)](+) catalyst. The reduced catalyst then enters into the H2-evolution cycle.

Mononuclear, Dinuclear, and Trinuclear Iron Complexes Featuring a New Monoanionic SNS Thiolate Ligand

The new tridentate ligand, S(Me)N(H)S = 2-(2-methylthiophenyl)benzothiazolidine, prepared in a single step from commercial precursors in excellent yield, undergoes ring-opening on treatment with Fe(OTf)2 in the presence of base affording a trinuclear iron complex, [Fe3(μ2-S(Me)NS(-))4](OTf)2 (1) which is fully characterized by structural and spectroscopic methods. X-ray structural data reveal that 1 contains four S(Me)NS(-) ligands meridionally bound to two pseudooctahedral iron centers each bridged by two thiolates to a distorted tetrahedral central iron. The combined spectroscopic (UV-vis, Mössbauer, NMR), magnetic (solution and solid state), and computational (DFT) studies indicate that 1 includes a central, high-spin Fe(II) (S = 2) with two low-spin (S = 0) peripheral Fe(II) centers. Complex 1 reacts with excess PMePh2, CNxylyl (2,6-dimethylphenyl isocyanide), and P(OMe)3 in CH3CN to form diamagnetic, thiolate-bridged, dinuclear Fe(II) complexes {[Fe(μ-S(Me)NS(-))L2]2}(OTf)2 (2-4). These complexes are characterized by elemental analysis; (1)H NMR, IR, UV-vis, and Mössbauer spectroscopy; and single crystal X-ray diffraction. Interestingly, addition of excess P(OMe)3 to complex 1 in CH2Cl2 produces primarily the diamagnetic, mononuclear Fe(II) complex, {Fe(S(Me)NS(-))[P(OMe)3]3}(OTf) (5).

A computational mechanistic investigation of hydrogen production in water using the [RhIII(dmbpy)2Cl2]+/[RuII(bpy)3]2+/ascorbic acid photocatalytic system

The involvement of the Rh^III(H) and Rh^II(H) hydride species in the mechanism of H₂ production could explain the high efficiency of the photocatalytic system.

Hydrogen generation: aromatic dithiolate-bridged metal carbonyl complexes as hydrogenase catalytic site models

The design, syntheses and characteristics of metal carbonyl complexes with aromatic dithiolate linkers reported as bioinspired hydrogenase catalytic site models are described and reviewed. Among these the complexes capable of hydrogen generation have been discussed in detail. Comparisons have been made with carbonyl complexes having alkyl dithiolates as linkers between metal centers.

[FeFe] hydrogenase active site modeling: a key intermediate bearing a thiolate proton and Fe hydride

The first di-protonated [FeFe] hydrogenase model relevant to key intermediates in catalytic hydrogen production is reported. The complex bearing the S-proton and Fe-hydride is structurally and spectroscopically characterized as well as studied by DFT calculations. The results show that the thiolate sulfur can accept protons during the catalytic routes.

Reactions of [FeFe]-hydrogenase models involving the formation of hydrides related to proton reduction and hydrogen oxidation

[FeFe]-hydrogenases are enzymes in nature that catalyze the reduction of protons and the oxidation of H2 at neutral pH with remarkably high activities and incredibly low overpotential. Structural and functional biomimicking of the active site of [FeFe]-hydrogenases can provide helpful hints for elucidating the mechanism of H2 evolution and uptake at the [FeFe]-hydrogenase active site and for designing bioinspired catalysts to replace the expensive noble metal catalysts for H2 generation and uptake. This perspective focuses on the recent progress in the formation and reactivity of iron hydrides closely related to the processes of proton reduction and hydrogen oxidation mediated by diiron dithiolate complexes. The second section surveys the bridging and terminal hydride species formed from various diiron complexes as well as the intramolecular proton transfer. The very recent progress in H2 activation by diiron dithiolate models are reviewed in the third section. In the concluding remarks and outlook, the differences in structure and catalytic mechanism between the synthetic models and the native [FeFe]-H2ase active site are compared and analyzed, which may cause the need for a significantly larger driving force and may lead to lower activities of synthetic models than the [FeFe]-H2ases for H2 generation and uptake.

Mixed-valence [Fe(I)Fe(II)] hydrogenase active site model complexes stabilized by a bidentate carborane bis-phosphine ligand

A series of [FeFe]-hydrogenase active site analogues, with the general formula [Fe(2)(dt)(CO)(4)(BC)] 1-3 (dt = dithiolate, pdt = propyl-1,3-dt (1), bdt = benzene-1,2-dt (2), edt = ethyl-1,2-dt (3); BC = 1,2-bisdiphenylphosphine-1,2-o-carborane), has been prepared and structurally characterized. While the electrochemical reductions of 1-3 are largely invariant to the different nature of their dt bridges, the oxidations differ by more than 120 mV in between the series. Remarkably, all three compounds are reversibly oxidized, with complex 1 that contains the most electron-donating pdt ligand at the mildest potential of -0.09 V vs. Fc/Fc(+). The one-electron oxidized state 1(ox) is stable for several minutes and was spectroscopically characterized by FTIR and EPR. EPR spectroscopy provided evidence that in the mixed-valence [Fe(I)Fe(II)] state most of the spin density is located on the iron with the BC-ligand. This is monitored through the strong (31)P hyperfine coupling of the phenyl groups of the BC ligand, while further delocalization into the o-carborane unit is negligible.

Tetranuclear iron complexes bearing benzenetetrathiolate bridges as four-electron transformation templates and their electrocatalytic properties for proton reduction

Two tetranuclear iron-sulfur complexes, (μ,μ-pbtt)[Fe(2)(CO)(6)](2) (pbtt = benzene-1,2,4,5-tetrathiolato, 3) and (μ,μ-obtt)[Fe(2)(CO)(6)](2) (obtt = benzene-1,2,3,4-tetrathiolato, 4), were prepared from reaction of Fe(3)(CO)(12) and the corresponding tetramercaptobenzene in THF, respectively. Complexes 5 and 6, (μ,μ-pbtt)[Fe(2)(CO)(5)L(1)][Fe(2)(CO)(5)L(2)] (L(1) = CO, L(2) = PPyr(3) (Pyr = N-pyrrolyl), 5; L(1) = L(2) = PPyr(3), 6) were obtained by controlling CO displacement of 3 with PPyr(3). Molecular structures of 3-6 were determined by spectroscopic and single-crystal X-ray analyses. All-CO Fe(4)S(4) complexes 3 and 4 each display four-electron reduction processes in consecutive chemically reversible two-electron reduction events with relatively narrow potential spans in the cyclic voltammograms. Phosphine-substituted Fe(4)S(4) complexes 5 and 6 exhibit two consecutive two-electron reduction events, which are not fully reversible. The electrocatalytic properties of 3 and 4 for proton reduction were studied using a series of carboxylic acids of increasing strength (CH(3)COOH, CH(2)ClCOOH, CHCl(2)COOH, CCl(3)COOH, and CF(3)COOH). The mechanisms for electrochemical proton reduction to hydrogen catalyzed by complex 3 as a function of acid strength are discussed.

Multielectron-transfer templates via consecutive two-electron transformations: iron-sulfur complexes relevant to biological enzymes

[FeFe] hydrogenase mimics: two polynuclear iron-sulfur complexes (1 and 2) were prepared and structurally characterized. They are potentially effective and stable multielectron-transfer relays for mediating four- and six-electron transformations via a cascade of reversible two-electron redox steps with relatively narrow potential spans.