Chain length of bioinspired polyamines affects size and condensation of monodisperse silica particles

Polyamines play a major role in biosilicification reactions in diatoms and sponges. While the effects of polyamines on silicic acid oligomerization and precipitation are well known, the impact of polyamines chain length on silica particle growth is unclear. We studied the effects of polyamine chain length on silica particle growth and condensation in a known, simple, and salt-free biphasic reaction system; with tetraethyl orthosilicate as organic phase and polyamine dissolved in the aqueous phase. The particles at various growth stages were characterized by Cryo- Transmission Electron Microscopy, Scanning Electron Microscopy, Thermogravimetric Analysis, Zeta Potential, and solid-state NMR analysis. Polyamines were found co-localized within silica particles and the particle diameter increased with an increase in polyamine chain length, whereas silica condensation showed the opposite trend. Particle growth is proposed to progress via a coacervate intermediate while the final particles have a core shell structure with an amine-rich core and silica-rich shell. The results presented in this paper would of interest for researchers working in the field of bioinspired materials.

TiO2thin-walled nanofiber burst tube doped with Fe2O3nanograss for efficient degradation of levofloxacin: effect of precursor

By means of electrospinning combined with impregnation and calcination, the thin-walled TiO₂nano-burst tubes with Fe₂O₃nanograss on the surface were synthesized. The effects of precursor properties and concentration on the morphology, structure and photochemical properties of the prepared nanostructures were studied. Adding K₃[Fe(C₂O₄)₃]·3H₂O into the electrospinning solution as the precursor can not only realize the preparation of nanograss and thin-walled nano-burst tubes, but also achieve better degradation effect than that of FeCl₃. However, the composite prepared by adding 2% K₃[Fe(C₂O₄)₃]·3H₂O has the best synergistic effect, showing the best photoresponse performance and catalytic efficiency, and achieving the degradation of 94% levofloxacin within 90 min. In this study, a simple and economical synthesis strategy was proposed, that is, TiO₂/Fe₂O₃heterostructure with special structure was prepared by introducing a small amount of acid or metallic acid salts into the precursor as a high-performance photocatalyst.

Preparation of thick silica coatings on carbon fibers with fine-structured silica nanotubes induced by a self-assembly process

A facile method to coat carbon fibers with a silica shell is presented in this work. By immobilizing linear polyamines on the carbon fiber surface, the high catalytic activity of polyamines in the sol-gel-processing of silica precursors is used to deposit a silica coating directly on the fiber's surface. The surface localization of the catalyst is achieved either by attaching short-chain polyamines (e.g., tetraethylenepentamine) via covalent bonds to the carbon fiber surface or by depositing long-chain polyamines (e.g., linear poly(ethylenimine)) on the carbon fiber by weak non-covalent bonding. The long-chain polyamine self-assembles onto the carbon fiber substrate in the form of nanoscopic crystallites, which serve as a template for the subsequent silica deposition. The silicification at close to neutral pH is spatially restricted to the localized polyamine and consequently to the fiber surface. In case of the linear poly(ethylenimine), silica shells of several micrometers in thickness can be obtained and their morphology is easily controlled by a considerable number of synthesis parameters. A unique feature is the hierarchical biomimetic structure of the silica coating which surrounds the embedded carbon fiber by fibrillar and interconnected silica fine-structures. The high surface area of the nanostructured composite fiber may be exploited for catalytic applications and adsorption purposes.

Bioinspired synthesis of a soft-nanofilament-based coating consisting of polysilsesquioxanes/polyamine and its divergent surface control

The synthesis of polysilsesquioxanes coating with controllable one-dimensional nanostructure on substrates remains a major long-term challenge by conventional solution-phase method. The hydrolytic polycondensation of organosilanes in solution normally produces a mixture of incomplete cages, ladderlike, and network structures, resulting in the poor control of the formation of specific nanostructure. This paper describes a simple aqueous process to synthesize nanofilament-based coatings of polysilsesquioxanes possessing various organo-functional groups (for example, thiol, methyl, phenyl, vinyl, and epoxy). We utilized a self-assembled nanostructured polyamine layer as a biomimetically catalytic scaffold/template to direct the formation of one-dimensional nanofilament of polysilsesquioxanes by temporally and spatially controlled hydrolytic polycondensation of organosilane. The surface nanostructure and morphology of polysilsesquioxane coating could be modulated by changing hydrolysis and condensation reaction conditions, and the orientation of nanofilaments of polysilsesquioxanes on substrates could be controlled by simply adjusting the self-assembly conditions of polyamine layer. The nanostructure and polyamine@polysilsesquioxane hybrid composition of nanofilament-based coatings were examined by means of scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). The template role of nanostructured polyamine layer for the formation of polysilsesquioxane nanofilament was confirmed by combining thin film X-ray diffraction (XRD) and XPS measurements. Moreover, these nanotextured coatings with various organo-functional groups could be changed into superhydrophobic surfaces after surface modification with fluorocarbon molecule.

Approaches to nanostructure control and functionalizations of polymer@silica hybrid nanograss generated by biomimetic silica mineralization on a self-assembled polyamine layer

We report the rational control of the nanostructure and surface morphology of a polyamine@silica nanoribbon-based hybrid nanograss film, which was generated by performing a biomimetic silica mineralization reaction on a nanostructured linear polyethyleneimine (LPEI) layer preorganized on the inner wall of a glass tube. We found that the film thickness, size and density of the nanoribbons and the aggregation/orientation of the nanoribbons in the film were facile to tune by simple adjustment of the biomimetic silicification conditions and LPEI self-assembly on the substrate. Our LPEI-mediated nanograss process allows the facile and programmable generation of a wide range of nanostructures and surface morphologies without the need for complex molecular design or tedious techniques. This ribbon-based nanograss has characteristics of a LPEI@silica hybrid structure, suggesting that LPEI, as a polymeric secondary amine, is available for subsequent chemical reaction. This feature was exploited to functionalize the nanograss film with three representative species, namely porphyrin, Au nanoparticles and titania. Of particular note, the novel silica@titania composite nanograss surface demonstrated the ability to convert its wetting behavior between the extreme states (superhydrophobic-superhydrophilic) by surface hydrophobic treatment and UV irradiation. The anatase titania component in the nanograss film acts as a highly efficient photocatalyst for the decomposition of the low-surface-energy organic components attached to the nanosurface. The ease with which the nanostructure can be controlled and facilely functionalized makes our nanograss potentially important for device-based application in microfluidic, microreactor and biomedical fields.