Bio-inspired polynorepinephrine based nanocoatings for reduced graphene oxide/gold nanoparticles composite for high-performance biosensing of Mycobacterium tuberculosis

Polydopamine (PDA) has established itself as a promising grafting and coating material, particularly for functional group-deprived electrochemically active nanomaterials such as graphene, MXene, CNT, metal nanoparticles, and so on, and has proven its extensive applicability in the design and development of electrochemical biosensor devices. However, polynorepinephrine (PNE), a sister compound of PDA, having additional -OH groups and greater coating uniformity and biocompatibility, has never been studied in the field of biosensors. Herein, we investigated PNE as a coating material for reduced graphene oxide (RGO) and gold nanoparticles (Au) in order to build an electrochemical genosensor for Mycobacterium tuberculosis (MTB) detection. Biotin-Avidin chemistry was used to covalently immobilize probe DNA (ssDNA) specific to MTB to the nanocomposite surface on glassy carbon electrode (GCE) in order to construct biosensing electrodes. The formation of RGO/PNE and RGO/PNE/Au nanocomposite as well as the immobilization of ssDNA onto the bioelectrodes are both corroborated by UV-Visible, Raman, and XRD studies with FE-SEM and HR-TEM analysis. The electrochemical studies performed using cyclic voltammetry (CV) and linear sweep voltammetry (LSV) showed the significant enhancement in charge transfer kinetics of RGO/PNE/GCE and RGO/PNE/Au/GCE electrode compared to GO/GCE electrode. The biosensing investigations performed using ssDNA/avidin/RGO/PNE/Au/GCE bioelectrode showed high sensitivity (2.3 × 10^-3 mA μM^-1), low detection limit (0.1 × 10^-7 μM), broad detection range (0.1 × 10^-2 to 0.1 × 10^-7 μM) with good selectivity and low response time (5 s) of the developed sensor. In comparison to the analogous RGO/PDA/Au material system, RGO/PNE/Au demonstrated increased enzyme loading, improved electrochemical responsiveness, and superior biosensing performance.

Development of electrochemical biosensor based on CNT-Fe3O4 nanocomposite to determine formaldehyde adulteration in orange juice

An electrochemical biosensor was developed to determine formaldehyde (HCHO) adulteration commonly found in food. The current responses of various electrodes based on multiwalled carbon nanotubes (CNTs) and synthesized nanocomposite (CNT-Fe3O4) were measured using cyclic voltammetry. The nanocomposite based biosensor shows comparatively high sensitivity (527 µA mg/L-1 cm-2), low detection limit (0.05 mg/L) in linear detection range 0.05-0.5 mg/L for formaldehyde detection using formaldehyde dehydrogenase (FDH) enzyme. In real sample analysis, the low obtained RSD values (less than 1.79) and good recovery rates (more than 90%) signify an efficient and precise sensor for the selective quantification of formaldehyde in orange juice. The developed biosensor has future implications for determining formaldehyde adulteration in citrus fruit juices and other liquid foods in agri-food chain to further resolve global food safety concerns, control unethical business practices of adulteration and reduce the widespread food borne illness outbreaks.

Gelatin methacrylate (GelMA) mediated electrochemical DNA biosensor for DNA hybridization

In this study, an electrochemical biosensor system for the detection of DNA hybridization by using gelatin methacrylate (GelMA) modified electrodes was developed. Electrochemical behavior of GelMA modified Pencil Graphite Electrode (PGE) that serve as a functional platform was investigated by using Cyclic Voltammetry (CV) and Electrochemical Impedance Spectroscopy (EIS) and compared with those of the bare PGE. Hybridization was achieved in solution phase and guanine oxidation signal changes were evaluated. The decrease in the guanine oxidation peak currents at around +1.0 V was used as an indicator for the DNA hybridization. Also, more interestingly GelMA intrinsic oxidation peaks at around +0.7 V changed substantially by immobilization of different oligonucleotides such as probe, hybrid and control sequences to the electrode surface. It is the first study of using GelMA as a part of an electrochemical biosensor system. The results are very promising in terms of using GelMA as a new DNA hybridization indicator. Additionally, GelMA modified electrodes could be useful for detecting ultra low quantity of oligonucleotides by providing mechanical support to the bio-recognition layer. The detection limit of this method is at present 10(-12)mol. Signal suppressions were increased from 50% to 93% for hybrid with using GelMA when it was compared to bare electrode which facilitates the hybridization detection.

Novel and high-performance asymmetric micro-supercapacitors based on graphene quantum dots and polyaniline nanofibers

In comparison with graphene sheets, graphene quantum dots (GQDs) exhibit novel chemical/physical properties including nanometer-size, abundant edge defects, good electrical conductivity, high mobility, chemical inertia, stable photoluminescence and better surface grafting, making them promising for fabricating various novel devices. In the present work, an asymmetric micro-supercapacitor, using GQDs as negative active material and polyaniline (PANI) nanofibers as positive active material, is built for the first time by a simple and controllable two-step electro-deposition on interdigital finger gold electrodes. Electrochemical measurements reveal that the as-made GQDs//PANI asymmetric micro-supercapacitor has a more excellent rate capability (up to 1000 V s(-1)) than previously reported electrode materials, as well as faster power response capability (with a very short relaxation time constant of 115.9 μs) and better cycling stability after 1500 cycles in aqueous electrolyte. On this basis, an all-solid-state GQDs//PANI asymmetric micro-supercapacitor is fabricated using H3PO4-polyvinyl alcohol gel as electrolyte, which also exhibits desirable electrochemical capacitive performances. These encouraging results presented here may open up new insight into GQDs with highly promising applications in high-performance energy-storage devices, and further expand the potential applications of GQDs beyond the energy-oriented application of GQDs discussed above.

Electrophoretic deposition of the thiophene-based copolymer and its composites with C60

Electrophoretic deposition is a useful and efficient technique to deposit conjugated polymers, if suitable suspension of the target polymer is obtained. Unfortunately, neither general theory nor universal procedure for the preparation of a suspension suitable for electrophoretic deposition has seemed to be established yet. Thus, accumulation of individual knowledge is still important in this area. Here, the preparation of suspensions of a thiophene-based polymer poly(3-octylthiophene-2,5-diyl-co-3-decyloxythiophene-2,5-diyl) (POT-co-DOT) and their application to the electrophoretic deposition have been reported. The suspensions of POT-co-DOT with various good/poor solvents ratios were easily obtained by mixing a toluene solution of the polymer and acetonitrile. The composition of the dispersion medium significantly affects the surface morphology of the film prepared by the electrophoretic deposition in the suspension. Composite films consisting of POT-co-DOT and C(60) have also been successfully prepared by electrophoretic deposition. Because the optical absorption peak at 333 nm in C(60) showed neither significant broadening nor a red shift, C(60) molecules were expected to be well-dispersed in the composite films. A photovoltaic device with a composite film prepared from a POT-co-DOT/C(60) = 2:1 suspension showed 10 times larger short-circuit current density and 5 times larger power conversion efficiency than a device with pure POT-co-DOT, although further work is required to improve the device performance.