Growth behaviour and plasmon resonance properties of photocatalytically deposited Cu nanoparticles

The effect of a polymer capping agent on electrodeposited silver nanoparticles in a silver deposition-based electrochromic device

In this study, polyvinylpyrrolidone (PVP) was introduced into an Ag deposition-based electrochromic (EC) device as a capping agent for electrodeposited Ag nanoparticles (AgNPs) to improve the coloration characteristics of EC devices and to precisely control the size and shape of the AgNPs. Through the coordination of PVP molecules with Ag+ ions in the EC electrolyte, the critical voltage for the deposition of AgNPs decreased, resulting in a lower operating voltage of the EC device in comparison with the conventional one. Because particle growth and AgNP aggregation were suppressed by the capping effect of PVP, uniform electrodeposition of AgNPs was achieved. Aggregation suppression enabled vivid cyan, yellow, and red coloration using a simple driving procedure. The suppression of AgNP aggregation by PVP was demonstrated even in an electrochemical system. Furthermore, the capping effect of PVP also improved image retention. Better color retention properties were achieved even without the use of any counter-modified electrode cells.

Small Copper Nanoclusters Synthesized through Solid-State Reduction inside a Ring-Shaped Polyoxometalate Nanoreactor

Cu nanoclusters exhibit distinctive physicochemical properties and hold significant potential for multifaceted applications. Although Cu nanoclusters are synthesized by reacting Cu ions and reducing agents by covering their surfaces using organic protecting ligands or supporting them inside porous materials, the synthesis of surface-exposed Cu nanoclusters with a controlled number of Cu atoms remains challenging. This study presents a solid-state reduction method for the synthesis of Cu nanoclusters employing a ring-shaped polyoxometalate (POM) as a structurally defined and rigid molecular nanoreactor. Through the reduction of Cu2+ incorporated within the cavity of a ring-shaped POM using H2 at 140 °C, spectroscopic studies and single-crystal X-ray diffraction analysis revealed the formation of surface-exposed Cu nanoclusters with a defined number of Cu atoms within the cavities of POMs. Furthermore, the Cu nanoclusters underwent a reversible redox transformation within the cavity upon alternating the gas atmosphere (i.e., H2 or O2). These Cu nanoclusters produced active hydrogen species that can efficiently hydrogenate various functional groups such as alkenes, alkynes, carbonyls, and nitro groups using H2 as a reductant. We expect that this synthesis approach will facilitate the development of a wide variety of metal nanoclusters with high reactivity and unexplored properties.

An improvement in the coloration properties of Ag deposition-based plasmonic EC devices by precise control of shape and density of deposited Ag nanoparticles

Ag nanoparticles exhibit various colors depending on their localized surface plasmon resonance (LSPR). Based on this phenomenon, Ag deposition-based electrochromic devices can represent various optical states in a single device such as the three primary colors (cyan, magenta, and yellow), silver mirror, black and transparent. A control of the morphology of Ag nanoparticles can lead to dramatic changes in color, as their size and shape influence the LSPR band. In this research, we focused on the diffusion rate of Ag⁺ ions when Ag nanoparticles are electrochemically deposited. Consequently, well-isolated Ag nanoparticles were obtained due to the slow growth rate by using an electrolyte with a low concentration of Ag⁺ ions, resulting in an improvement in the color quality of cyan and magenta. Additionally, spherical Ag nanoparticles were deposited in the same device by optimizing their voltage application conditions, which represented yellow and green colors. In particular, green coloration is a unique phenomenon because it can appear by the combination of two absorption peaks of LSPR. As a result of investigating the finite-difference time-domain method, it was observed that the LSPR band in the long wavelength region was originated from the effects of the connection between Ag particles.

Vis-Responsive Copper-Modified Titania for Decomposition of Organic Compounds and Microorganisms

Seven commercial titania (titanium(IV) oxide; TiO2) powders with different structural properties and crystalline compositions (anatase/rutile) were modified with copper by two variants of a photodeposition method, i.e., methanol dehydrogenation and water oxidation. The samples were characterized by diffuse reflectance spectroscopy (DRS), X-ray powder diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS). Although zero-valent copper was deposited on the surface of titania, oxidized forms of copper, post-formed in ambient conditions, were also detected in dried samples. All samples could absorb visible light (vis), due to localized surface plasmon resonance (LSPR) of zero-valent copper and by other copper species, including Cu2O, CuO and CuxO (x:1-2). The photocatalytic activities of samples were investigated under both ultraviolet (UV) and visible light irradiation (>450 nm) for oxidative decomposition of acetic acid. It was found that titania modification with copper significantly enhanced the photocatalytic activity, especially for anatase samples. The prolonged irradiation (from 1 to 5 h) during samples’ preparation resulted in aggregation of copper deposits, thus being detrimental for vis activity. It is proposed that oxidized forms of copper are more active under vis irradiation than plasmonic one. Antimicrobial properties against bacteria (Escherichia coli) and fungi (Aspergillus niger) under vis irradiation and in the dark confirmed that Cu/TiO2 exhibits a high antibacterial effect, mainly due to the intrinsic activity of copper species.

Generation of reactive oxygen species and charge carriers in plasmonic photocatalytic Au@TiO2 nanostructures with enhanced activity

The combination of semiconductor and plasmonic nanostructures, endowed with high efficiency light harvesting and surface plasmon confinement, has been a promising way for efficient utilization of solar energy. Although the surface plasmon resonance (SPR) assisted photocatalysis has been extensively studied, the photochemical mechanism, e.g. the effect of SPR on the generation of reactive oxygen species and charge carriers, is not well understood. In this study, we take Au@TiO2 nanostructures as a plasmonic photocatalyst to address this critical issue. The Au@TiO2 core/shell nanostructures with tunable SPR property were synthesized by the templating method with post annealing thermal treatment. It was found that Au@TiO2 nanostructures exhibit enhanced photocatalytic activity in either sunlight or visible light (λ > 420 nm). Electron spin resonance spectroscopy with spin trapping and spin labeling was used to investigate the enhancing effect of Au@TiO2 on the photo-induced reactive oxygen species and charge carriers. The formation of Au@TiO2 core/shell nanostructures resulted in a dramatic increase in light-induced generation of hydroxyl radicals, singlet oxygen, holes and electrons, as compared with TiO2 alone. This enhancement under visible light (λ > 420 nm) irradiation may be dominated by SPR induced local electrical field enhancement, while the enhancement under sunlight irradiation is dominated by the higher electron transfer from TiO2 to Au. These results unveiled that the superior photocatalytic activity of Au@TiO2 nanostructures correlates with enhanced generation of reactive oxygen species and charge carriers.

Oxidation-stable plasmonic copper nanoparticles in photocatalytic TiO2 nanoarchitectures

Ultraporous copper/titanium dioxide (Cu/TiO₂) aerogels supporting <5 nm diameter copper nanoparticles are active for surface plasmon resonance (SPR)-driven photocatalysis. The extended nanoscale Cu‖TiO₂ junctions in Cu/TiO₂ composite aerogels-which arise as a result of photodepositing copper at the surface of the nanoparticulate-bonded TiO₂ aerogel architecture-stabilize Cu against oxidation to an extent that preserves the plasmonic behavior of the nanoparticles, even after exposure to oxidizing conditions. The metallicity of the Cu nanoparticles within the TiO₂ aerogel is verified by aberration-corrected scanning transmission electron microscopy, electron energy-loss spectroscopy, and infrared spectroscopy using CO binding as a probe to distinguish Cu(0) from Cu(i). In contrast, photoreduction of Cu(ii) at a commercial nanoscale anatase TiO₂ powder with primary particle sizes significantly larger than those in the aerogel results in a copper oxide/TiO₂ composite that exhibits none of the plasmonic character of Cu nanoparticles. We attribute the persistence of plasmonic Cu nanoparticles without the use of ligand stabilizers to the arrangement of Cu and TiO₂ within the aerogel architecture where each Cu nanoparticle is in contact with multiple nanoparticles of the reducing oxide. The wavelength dependence of the photoaction spectra for Cu/TiO₂ aerogel films reveals visible-light photocatalytic oxidation activity initiated by an SPR-driven process-as opposed to photo-oxidation initiated by excitation of narrow-bandgap copper oxides.

Zinc Oxide-Supported Copper Clusters with High Biocidal Efficacy for Escherichia coli and Bacillus cereus

Cu clusters on ZnO have been prepared by a simple low-temperature solid-state reaction from their respective acetate precursors. The formation of metallic Cu along with a small quantity of CuO was influenced by the presence of the zinc acetate precursor. Although there is a lack of formation of any metallic Cu in the absence of zinc acetate, increase in the heating duration helps in the formation of increased metallic Cu. A mechanism for formation of the Cu@ZnO nanocomposite has been suggested. The prepared Cu@ZnO nanocomposite, with metallic Cu, was identified by X-ray diffraction studies followed by confirmation of clusters of the kind Cu9 and Cu18 by transmission electron microscopy and matrix-assisted laser desorption ionization time-of-flight mass spectrometry. The photoelectron spectroscopy is able to clearly distinguish the Cu from CuO, which is very well complimented by electron spin resonance analysis. The morphological feature of ZnO changes from flakes to rods on increasing the duration of heating, as shown by scanning electron microscopy (SEM) analysis. The observed Cu plasmonic band in UV-vis diffuse reflectance gets blue-shifted to 463 nm from its normally observed position of 550-580 nm possibly due to cluster formation and interaction with ZnO, the band gap of the latter getting red-shifted to 3.2-3.0 eV. The antibacterial activity of the synthesized Cu cluster-ZnO nanocomposites was investigated against Escherichia coli ATCC-25922 for Gram-negative and Bacillus cereus ATCC-10876 for Gram-positive bacteria. Tests were performed on a nutrient agar medium and liquid broth supplemented with different concentrations of nanoparticles. SEM analysis of the native and treated Gram-positive and Gram-negative bacteria established a high efficacy of biocide activity in 24 h, with 200 μg/mL of Cu@ZnO nanocomposites.

Synthesis of mesoporous silica-supported Ag nanorod-based bimetallic catalysts and investigation of their plasmonic activity under visible light irradiation

Bimetallic Ag nanorod-based heterogeneous plasmonic nanocatalysts were synthesized for obtaining excellent catalytic performances under visible light irradiation.

A very simple method for the preparation of Au/TiO2plasmonic photocatalysts working under irradiation of visible light in the range of 600–700 nm

Partially spherical Au/TiO₂worked as plasmonic photocatalyst under irradiation of red light.

High performance Au-Cu alloy for enhanced visible-light water splitting driven by coinage metals

A Au-Cu alloy strategy is, for the first time, demonstrated to be effective in enhancing visible-light photocatalytic H2 evolution via promoting metal interband transitions. Au3Cu/SrTiO3, in which oxidation of Cu was successfully restrained, showed the highest visible-light H2 evolution activity.

Advances and recent trends in heterogeneous photo(electro)-catalysis for solar fuels and chemicals

In the context of a future renewable energy system based on hydrogen storage as energy-dense liquid alcohols co-synthesized from recycled CO2, this article reviews advances in photocatalysis and photoelectrocatalysis that exploit solar (photonic) primary energy in relevant endergonic processes, viz., H2 generation by water splitting, bio-oxygenate photoreforming, and artificial photosynthesis (CO2 reduction). Attainment of the efficiency (>10%) mandated for viable techno-economics (USD 2.00-4.00 per kg H2) and implementation on a global scale hinges on the development of photo(electro)catalysts and co-catalysts composed of earth-abundant elements offering visible-light-driven charge separation and surface redox chemistry in high quantum yield, while retaining the chemical and photo-stability typical of titanium dioxide, a ubiquitous oxide semiconductor and performance "benchmark". The dye-sensitized TiO2 solar cell and multi-junction Si are key "voltage-biasing" components in hybrid photovoltaic/photoelectrochemical (PV/PEC) devices that currently lead the field in performance. Prospects and limitations of visible-absorbing particulates, e.g., nanotextured crystalline α-Fe2O3, g-C3N4, and TiO2 sensitized by C/N-based dopants, multilayer composites, and plasmonic metals, are also considered. An interesting trend in water splitting is towards hydrogen peroxide as a solar fuel and value-added green reagent. Fundamental and technical hurdles impeding the advance towards pre-commercial solar fuels demonstration units are considered.

A special Ag/AgCl network-nanostructure for selective catalytic degradation of refractory chlorophenol contaminants

Ag/AgCl network-structures exhibit high photocatalytic performance for the selective degradation of 4-CP under UV-light, suggesting potential application for organic pollutant elimination.

Hierarchical visible-light-response Ag/AgCl@TiO2 plasmonic photocatalysts for organic dye degradation

A plasmonic photocatalyst of Ag/AgCl@TiO2 nanoparticles (NPs) was directly prepared by a one-step sonochemical method. Both Ag NPs and AgCl were co-deposited on TiO2 NPs to form Ag@TiO2 and Ag/AgCl@TiO2 using the method. Due to the localized surface plasmonic effects of Ag NPs, the visible-light absorbance of the Ag/AgCl@TiO2 photocatalyst was dramatically increased and the photocatalytic activity to decompose Rhodamine B was much improved under visible light. In addition, due to the advantages of the sonochemical approach, only a very small amount of Ag is required to obtain a high photocatalytic activity in the plasmonic catalyst. The mechanism for the enhancement of the visible-light-driven photocatalytic activities was also analyzed.

Hierarchically plasmonic photocatalysts of Ag/AgCl nanocrystals coupled with single-crystalline WO₃ nanoplates

The hierarchical photocatalysts of Ag/AgCl@plate-WO₃ have been synthesized by anchoring Ag/AgCl nanocrystals on the surfaces of single-crystalline WO₃ nanoplates that were obtained via an intercalation and topochemical approach. The heterogeneous precipitation process of the PVP-Ag⁺-WO₃ suspensions with a Cl⁻ solution added drop-wise was developed to synthesize AgCl@WO₃ composites, which were then photoreduced to form Ag/AgCl@WO₃ nanostructures in situ. WO₃ nanocrystals with various shapes (i.e., nanoplates, nanorods, and nanoparticles) were used as the substrates to synthesize Ag/AgCl@WO₃ photocatalysts, and the effects of the WO₃ contents and photoreduction times on their visible-light-driven photocatalytic performance were investigated. The techniques of TEM, SEM, XPS, EDS, XRD, N₂ adsorption-desorption and UV-vis DR spectra were used to characterize the compositions, phases and microstructures of the samples. The RhB aqueous solutions were used as the model system to estimate the photocatalytic performance of the as-obtained Ag/AgCl@WO₃ nanostructures under visible light (λ ≥ 420 nm) and sunlight. The results indicated that the hierarchical Ag/AgCl@plate-WO₃ photocatalyst has a higher photodegradation rate than Ag/AgCl, AgCl, AgCl@WO₃ and TiO₂ (P25). The contents and morphologies of the WO₃ substrates in the Ag/AgCl@plate-WO₃ photocatalysts have important effects on their photocatalytic performance. The related mechanisms for the enhancement in visible-light-driven photodegradation of RhB molecules were analyzed.