Triazolated calix[4]semitubes: assembling strategies towards long multicalixarene architectures

Cone and 1,3-alternate calix[4]arenes bearing pairs of 2-azidoethyl or propargyl groups, and 1,3-alternate calix[4]arenes having four 2-azidoethyl, four propargyl groups or pairs of 2-azidoethyl and silylated propargyl groups were explored...

Supramolecular-induced regiocontrol over the photochemical [4 + 4] cyclodimerization of NHC- or azole-substituted anthracenes

Thanks to the impressive control that microenvironments within enzymes can have over substrates, many biological reactions occur with high regio- and stereoselectivity. However, comparable regio- and stereoselectivity is extremely difficult to achieve for many types of reactions, particularly photochemical cycloaddition reactions in homogeneous solutions. Here, we describe a supramolecular templating strategy that enables photochemical [4 + 4] cycloaddition of 2,6-difunctionalized anthracenes with unique regio- and stereoselectivity and reactivity using a concept known as the supramolecular approach. The reaction of 2,6-azolium substituted anthracenes H₄-L(PF₆)₂ (L = 1a–1c) with Ag₂O yielded complexes anti-[Ag₂L₂](PF₆)₄ featuring an antiparallel orientation of the anthracene groups. Irradiation of complexes anti-[Ag₂L₂](PF₆)₄ proceeded under [4 + 4] cycloaddition linking the two anthracene moieties to give cyclodimers anti-[Ag₂(2)](PF₆)₂. Reaction of 2,6-azole substituted anthracenes with a dinuclear complex [Cl-Au-NHC–NHC-Au-Cl] yields tetranuclear assemblies with the anthracene moieties oriented in syn-fashion. Irradiation and demetallation gives a [4 + 4] syn-photodimer of two anthracenes. The stereoselectivity of the [4 + 4] cycloaddition between two anthracene moieties is determined by their orientation in the metallosupramolecular assemblies.

A supramolecular templating strategy that enables the photochemical [4 + 4] cycloaddition of 2,6-difunctionalized anthracene derivatives with unique stereoselectivity has been developed based on metal-NHC units.

Organic Cages as Building Blocks for Mechanically Interlocked Molecules: Towards Molecular Machines

The research on systems able to perform controllable motions under external stimuli arises great interest in the scientific community. Over the years, a library of innovative devices has been produced, classified in different categories according to the molecular or supramolecular level of motion. This minireview aims to highlight some representative studies, in which organic cages are used as building blocks for mechanically interlocked molecules, and in which intramolecular motions are triggered by external input. However, the application of organic cages in the construction of molecular machines is hardly achieved. A good compromise must actually be reached, between flexibility and rigidity of the cage's framework for an effective control of the intra- and/or intermolecular motion in the final mechanical device. Our final goal is to stimulate researchers' curiosity towards cage-like molecules, so that they take on the challenge of converting a cage into a molecular machine.

Polyaromatic nanocapsules as photoresponsive hosts in water

Molecular containers that provide both stimuli-responsive assembly/disassembly properties and wide-ranging host capabilities in aqueous medium still remain a current synthetic challenge. Herein we report polyaromatic nanocapsules assembled from V-shaped amphiphilic molecules bearing a photoresponsive ortho-dianthrylbenzene unit in water. Unlike previously reported supramolecular capsules and cages, the nanocapsules quickly and quantitatively disassemble into monomeric species by a non-invasive light stimulus through structural conversion from the open to the closed form of the amphiphiles. Regeneration of the nanocapsules is demonstrated by light irradiation or heating of the closed amphiphiles. With the aid of the wide-ranging host capability, the photo-induced release of various encapsulated guest molecules (e.g., Nile red, Cu(II)-phthalocyanine, and fullerene C₆₀) can be achieved by using the present nanocapsule in water. This feature can furthermore be utilized to switch the fluorescence of encapsulated coumarin guests through their controlled release.

Photoresponsive molecular capsules that can be used in water are rare. Here, the authors construct polyaromatic nanocapsules via self-assembly from photoswitch-bearing amphiphilic molecules in water. Light induces a structural change in the amphiphiles, triggering the capsule to disassemble into monomers and release encapsulated guests.

Analysis of reaction kinetics in the photomechanical molecular crystal 9-methylanthracene using an extended Finke-Watzky model

In order to develop an improved description of the photomechanical response of 9-methylanthracene (9MA) microcrystals, a detailed study of its solid-state photochemical reaction kinetics is performed. The reaction progress is monitored through the decrease in absorption of an optically microcrystalline thin film. The evolution of the time-dependent photoluminescence during the reaction is also measured. Both the photochemical reaction and nonradiative relaxation rates increase as more photoproduct is formed. In order to analyze the data, an extended version of the Finke-Watzky kinetic model for photochemical reactions is derived, denoted the FW-P model. This extended version enables a systematic analysis of photochemical reaction kinetics in solid-state molecular systems at varying levels of approximation. The FW-P model describes the non-exponential decrease in reactant and also correctly predicts the magnitude of the observed decrease in photoluminescence lifetime over the course of the reaction. The lifetime analysis is complicated by the fact that the microcrystalline 9MA sample contains multiple emitting species, and the extended FW-P model fails to capture the exact dependence of the photoluminescence on product formation. Analysis of the 9MA data indicates that both the photodimerization and the nonradiative relaxation rates can be accelerated by a factor of 10 over the course of the reaction. The results in this paper demonstrate that autocatalytic photodimerization kinetics are present in crystalline 9MA and may influence its photomechanical response.

Single-Phase Photo-Cross-Linkable Bioinspired Adhesive for Precise Control of Adhesion Strength

A bioinspired, modular terpolymer adhesive, poly(N-methacryloyl-3,4-dihydroxyl-l-phenylalanine-co-9-(acryloyloxy)butyl anthracene-9-carboxylate-co-acrylic acid), has been synthesized containing three different functionalities: a photo-cross-linking segment, a wet interfacial adhesion segment, and a water-soluble segment. The synthesized adhesive polymer is the first example of a single-phase, photo-cross-linkable adhesive which does not require additional photoinitiator or other cross-linking agents. The terpolymer demonstrates strong adhesion when it swells in water and/or ethanol. The terpolymer is composed of three repeating units: N-methacryloyl-3,4-dihydroxyl-l-phenylalanine (MDOPA), which has been known to generate strong adhesion under wet conditions, poly(acrylic acid), which has been known to increase water solubility of polymers, and a photo-cross-linking segment consisting of an anthracene-based monomer used for enhancement of cohesion properties via UV irradiation (352 nm). A photomediated [4 + 4] cycloaddition reaction of anthracene results in the cross-linking of individual polymer chains after interfacial adhesion between substrates and adhesive polymers. Chemically, the covalent photo-cross-linking was confirmed by UV-vis, ¹H NMR, and gel permeation chromatography (GPC). The cross-linking-fortified cohesion of the adhesive polymer network yields strengthened cohesion properties of the bulk material. The photoreaction was conveniently controlled via the duration of UV-irradiation. The adhesion properties of new adhesives were characterized by lap shear strength on transparent Mylar film and glasses after the adhesive was swollen in biologically friendly solvents including water and ethanol. The adhesion strength (J/m²) was enhanced by 850% under 352 nm UV-irradiation. Multiple application variables were tested to determine the optimal conditions, such as solvent, concentration, polymer composition, and substrate. The best adhesion properties were obtained from a 1:1 weight ratio of polymer:solvent in water on a Mylar film surface. As a single-phase system, the synthesized terpolymer is very convenient to use, and its adhesion strength can be easily modified by UV light. Additionally, the terpolymer's high water compatibility makes it ideally suited for application in the biomedical field.

Light-responsive molecular containers

This review highlights relevant studies of light-controlled molecular containers able to catch and release small molecules.

Light- and heat-triggered reversible luminescent materials based on polysiloxanes with anthracene groups

Reversible silicone elastomers were successfully developed by light-triggered dimerization and heat depolymerization which happened to the anthryl groups.

Polyalkynylanthracenes--syntheses, structures and their behaviour towards UV irradiation

A series of bis- and tris[(trimethylsilyl)ethynyl]anthracenes (1,5-, 1,8-, 9,10- and 1,8,10-) has been synthesised by multistep (cross coupling) reactions and the behaviour of the SiMe3-functionalised alkynylanthracene derivatives towards UV irradiation was qualitatively studied by NMR spectroscopy. In the case of 9,10-bis[(trimethylsilyl)ethynyl]anthracene we observed a photodimerisation upon UV irradiation; the third example was reported for a symmetrically 9,10-difunctionalised anthracene derivative, besides those with small fluorine- and methyl-substituents. The anthracene dimerisation is completely thermally reversible and the temperature dependence of the cycloelimination reaction was studied by (1)H VT-NMR experiments. The (deprotected) 1,5- and 1,8-diethynylanthracenes were converted with (dimethylamino)trimethylstannane to obtain the corresponding SnMe3-functionalised alkynes, potentially useful as highly conjugated building blocks in Stille cross coupling reactions. The new anthracene compounds were completely characterised by multinuclear NMR spectroscopy, (high resolution) mass spectrometry and - in most cases - by X-ray diffraction experiments.

Self-assembled capsules based on tetrafunctionalized calix[4]resorcinarene cavitands

The hemispherical structures of calix[4]resorcinarene cavitands are suitable for forming capsular assemblies with guest encapsulations through various intermolecular interactions.

Photoresponsive self-assembled hexameric capsules based on calix[4]resorcinarenes bearing azobenzene dendron conjugates as side chains

Calix[4]resorcinarenes with azobenzene dendron conjugates achieve control of the assembly–disassembly–reassembly process of the hydrogen-bonded hexameric capsules by a light stimulus.