Manipulating morphology and composition in colloidal heterometallic nanopods and nanodendrites

Branched Pt nanoparticles represent an exciting class of nanomaterials with high surface areas suitable for applications in electrocatalysis. Introducing a second metal can enhance performance and reduce cost. External factors such as capping agents and temperature have been used to offer insights into nanopod formation and to encourage their kinetic evolution. More recently, nanodendrites have been reported, though synthesis has generally been empirical; making controlled variation of morphology while maintaining bimetallic composition an elusive target. We report the combination of Pt with Fe under a range of conditions, yielding individually bimetallic nanoparticles whose construction sheds new light on nanopod and/or nanodendrite formation. Fine control of metal precursor reduction through modulating capping agents, reagents, and temperature initially directs nanopod synthesis. Morphology control is retained while composition is then varied from Pt-rich to Pt-poor. Additionally, conditions are identified that promote the collision-based branching of nanopod arms. This allows synthesis to be redirected for the selective growth of compositionally controlled nanodendrites in predictable fashion.

In Situ Surface-Enhanced Raman Spectroscopy Characterization of Electrocatalysis with Different Nanostructures

As energy demands increase, electrocatalysis serves as a vital tool in energy conversion. Elucidating electrocatalytic mechanisms using in situ spectroscopic characterization techniques can provide experimental guidance for preparing high-efficiency electrocatalysts. Surface-enhanced Raman spectroscopy (SERS) can provide rich spectral information for ultratrace surface species and is extremely well suited to studying their activity. To improve the material and morphological universalities, researchers have employed different kinds of nanostructures that have played important roles in the development of SERS technologies. Different strategies, such as so-called borrowing enhancement from shell-isolated modes and shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS)-satellite structures, have been proposed to obtain highly effective Raman enhancement, and these methods make it possible to apply SERS to various electrocatalytic systems. Here, we discuss the development of SERS technology, focusing on its applications in different electrocatalytic reactions (such as oxygen reduction reactions) and at different nanostructure surfaces, and give a brief outlook on its development.

Growth kinetic control over MgFe2O4 to tune Fe occupancy and metal–support interactions for optimum catalytic performance

For the first time, the growth behavior with size-dependent Fe occupancies at different sites of MgFe₂O₄ was examined. Hybrid catalysts of Pt/MgFe₂O₄ with a support size of 20.6 nm exhibited an optimal performance of CO oxidation.

Tailored Design of Mesoporous PdCu Nanospheres with Different Compositions Using Polymeric Micelles

Mesoporous metals have attracted a lot of interest due to their wide range of applications, particularly in catalysis. We previously reported the preparation of mesoporous Pd using block copolymer micelle templates (Chem. Sci. 2019, 10, 4054). Here we extend this synthetic concept to generate alloyed spherical palladium-copper (PdCu) nanoparticles with an open porous network and uniform morphology. This one-pot synthesis is initiated by water-induced micellization of the block copolymer, followed by the chemical reduction, nucleation, and growth of mesoporous spherical alloy nanoparticles. Porosity enables accessibility to numerous active sites throughout the interior and exterior surfaces of the nanoparticles. Mesoporous nanoparticles composed of Pd and Cu alloy exhibit enhanced electrocatalytic activity and stability in the ethanol oxidation reaction (EOR) and the oxygen reduction reaction (ORR).

Ni(OH)2 Decorated Pt-Cu Octahedra for Ethanol Electrooxidation Reaction

Here we report the synthesis of 9 nm Ni(OH)2 decorated Pt-Cu octahedra (Ni(OH)2-PtCu) in one-pot synthesis for ethanol oxidation reaction (EOR) electrocatalysis in acidic electrolyte. To prepare Ni(OH)2-PtCu octahedra, CO gas was directly introduced in a reaction process as selective capping agents on the PtCu(111) facet. Ni(OH)2 was naturally deposited on the Pt-Cu octahedra during the synthesis. Carbon supported Ni(OH)2-PtCu (Ni(OH)2-PtCu/C) as an EOR catalyst showed enhanced CO tolerance due to the existence of oxophilic Ni(OH)2 on the surface of Pt-Cu, facilitating water dissolution to produce OH adsorption and to promote complete CO oxidation to CO2. In addition, Pt-Cu alloy composition also showed improvement of CO tolerance because of modified d-band structure of the Pt atoms, thereby weakening the binding strength of CO on the catalysts. Therefore, the Ni(OH)2-PtCu/C showed enhanced EOR activity and durability compared to the Pt-Cu octahedra and commercial Pt/C counterparts.

Surface Structure Characterization of Shape and Size Controlled Pd Nanoparticles by Cu UPD: A Quantitative Approach

The search for new surface sensitive probes that characterize the surface structure of shape and size-controlled nanoparticles is an interesting topic to properly understand the correlations between electrocatalytic properties and surface structure at the nanoscale. Herein, we report the use of Cu UPD to characterize, not only qualitatively but also quantitatively, the surface structure of different Pd nanoparticles with controlled particle shape and size. Thus, Pd nanoparticles with cubic, octahedral and rhombic dodecahedral shapes, that is, with preferential {100}, {111}, and {110} surface structures, respectively, were prepared. In addition, cubic Pd nanoparticles with different particles sizes and spherical (2–3 nm) Pd nanoparticles were also synthesized. Based on the Cu UPD results on Pd single crystals, a new approach is proposed to qualitatively and quantitatively determine the percentages of {100}, {111}, and {110} surface domains present at the surface of the different shape and size controlled Pd nanoparticles. The results reported clearly show the benefits of this Cu UPD to get detailed information of the surface structure of the nanoparticles according to their particle shape and size.

Rapid synthesis of ultrasmall platinum nanoparticles supported on macroporous cellulose fibers for catalysis

Herein, we report a facile method for the synthesis of platinum nanoparticles (PtNPs) about 2.25 nm in size by heating a solution of chloroplatinic acid and sodium rhodizonate. The PtNPs were synthesized in about 5 min. The PtNPs were supported on macroporous cellulose fibers that were obtained from Kimwipe paper (KWP). The cellulose fiber-supported PtNPs (PtNPs@KWP) exhibited excellent catalytic activity towards the reduction of organic pollutants [e.g. methyl orange (MO)] in the presence of hydrogen (H₂) gas and formic acid (FA). FA and H₂ gas were utilized as clean and alternative reducing agents. The reduction of MO was performed in two different types of water matrices viz. deionized water (DIW) and simulated fresh drinking water (FDW). In both water matrices, the FA mediated reduction of MO was found to be faster than the H₂ gas-bubbled one. The PtNPs@KWP demonstrated excellent cycling stability without leaching the PtNPs or platinum ions into the solution for at least five cycles.

Synthesis and Catalytic Properties of Modified Electrodes by Pulsed Electrodeposition of Pt/PANI Nanocomposite

In this study, the modification of glassy carbon electrodes by potentiostatic pulsed deposition of platinum nanoparticles and potentiostatic pulsed polymerization of polyaniline nanofibers was investigated. During the preparation of the nano-composite materials, the control of the potentiostatic pulsed deposition and potentiostatic pulsed polymerization parameters, such as pulse potential, pulse width time, duty cycle, and platinum precursor concentration allowed the optimization of the size, shape, and distribution of the deposited Pt nanoparticles. It is noteworthy that the polymerization method, cyclic voltammetry method, or potentiostatic pulsed polymerization method show an important effect in the morphology of the deposited polyaniline (PANI) film. The obtained modified electrodes, with highly uniform and well dispersed platinum nanoparticles, exhibit good electrocatalytic properties towards methanol oxidation.

Chemical Design of Palladium-Based Nanoarchitectures for Catalytic Applications

Palladium (Pd) plays an important role in numerous catalytic reactions, such as methanol and ethanol oxidation, oxygen reduction, hydrogenation, coupling reactions, and carbon monoxide oxidation. Creating Pd-based nanoarchitectures with increased active surface sites, higher density of low-coordinated atoms, and maximized surface coverage for the reactants is important. To address the limitations of pure Pd, various Pd-based nanoarchitectures, including alloys, intermetallics, and supported Pd nanomaterials, have been fabricated by combining Pd with other elements with similar or higher catalytic activity for many catalytic reactions. Herein, recent advances in the preparation of Pd-based nanoarchitectures through solution-phase chemical reduction and electrochemical deposition methods are summarized. Finally, the trend and future outlook in the development of Pd nanocatalysts toward practical catalytic applications are discussed.

Shape-controlled metal nanoparticles for electrocatalytic applications

The application of shape-controlled metal nanoparticles is profoundly impacting the field of electrocatalysis. On the one hand, their use has remarkably enhanced the electrocatalytic activity of many different reactions of interest. On the other hand, their usage is deeply contributing to a correct understanding of the correlations between shape/surface structure and electrochemical reactivity at the nanoscale. However, from the point of view of an electrochemist, there are a number of questions that must be fully satisfied before the evaluation of the shaped metal nanoparticles as electrocatalysts including (i) surface cleaning, (ii) surface structure characterization, and (iii) correlations between particle shape and surface structure. In this chapter, we will cover all these aspects. Initially, we will collect and discuss about the different practical protocols and procedures for obtaining clean shaped metal nanoparticles. This is an indispensable requirement for the establishment of correct correlations between shape/surface structure and electrochemical reactivity. Next, we will also report how some easy-to-do electrochemical experiments including their subsequent analyses can enormously contribute to a detailed characterization of the surface structure of the shaped metal nanoparticles. At this point, we will remark that the key point determining the resulting electrocatalytic activity is the surface structure of the nanoparticles (obviously, the atomic composition is also extremely relevant) but not the particle shape. Finally, we will summarize some of the most significant advances/results on the use of these shaped metal nanoparticles in electrocatalysis covering a wide range of electrocatalytic reactions including fuel cell-related reactions (electrooxidation of formic acid, methanol and ethanol and oxygen reduction) and also CO2 electroreduction.

Graphical Abstract:

Citrate-Coated, Size-Tunable Octahedral Platinum Nanocrystals: A Novel Route for Advanced Electrocatalysts

The development of green and scalable syntheses for the preparation of size- and shape-controlled metal nanocrystals is of high interest in many areas, including catalysis, electrocatalysis, nanomedicine, and electronics. In this work, a new synthetic approach based on the synergistic action of physical parameters and reagents produces size-tunable octahedral Pt nanocrystals, without the use of catalyst-poisoning reagents and/or difficult-to-remove coatings. The synthesis requires sodium citrate, ascorbic acid, and fine control of the reduction rate in aqueous environment. Pt octahedral nanocrystals with particle size as low as 7 nm and highly developed {111} facets have been achieved, as demonstrated by transmission electron microscopy, X-ray diffraction, and electrochemical methods. The absence of sticky molecules together with the high quality of the surface makes these nanocrystals ideal candidates in electrocatalysis. Notably, 7 nm bismuth-decorated octahedral nanocrystals exhibit superior performance for the electrooxidation of formic acid in terms of both specific and mass activities.

Electrochemical processes on solid shaped nanoparticles with defined facets

This 2007 Chemistry Nobel prize update covers scientific advances of the past decade in our understanding of electrocatalytic processes on surfaces of nanoscale shape-controlled polyhedral solids. It is argued that the field of chemical reaction processes on solid surfaces has recently been paying increasing attention to the fundamental understanding of electrified solid-liquid interfaces and toward the operando study of the minute fraction of catalytically active, structurally dynamic non-equilibrium Taylor-type surface sites. Meanwhile, despite mounting evidence of acting as structural proxies in some cases, the concept of catalytic structure sensitivity of well-defined nanoscale solid surfaces continues to be a key organizing principle for the science of shape-controlled nanocrystals and, hence, constitutes a central recurring theme in this review. After addressing key aspects and recent progress in the wet-chemical synthesis of shaped nanocatalysts, three areas of electrocatalytic processes on solid shape-controlled nanocrystals of current scientific priority are discussed in more detail: the oxygen electroreduction on shape-controlled Pt-Ni polyhedra with its technological relevance for low temperature fuel cells, the CO₂ electroreduction to hydrocarbons on Cu polyhedra and the puzzling interplay between chemical and structural effects, and the electrocatalytic oxygen evolution reaction from water on shaped transition metal oxides. The review closes with the conclusion that Surface Science and thermal catalysis, honored by Ertl's Nobel prize a decade ago, continue to show major repercussions on the emerging field of Interface Science.

Synthesis of ultrathin platinum nanoplates for enhanced oxygen reduction activity

Ultrathin Pt nanostructures exposing controlled crystal facets are highly desirable for their superior activity and cost-effectiveness in the electrocatalytic oxygen reduction reaction (ORR), and they are conventionally synthesized by epitaxial growth of Pt on a limited range of templates, such as Pd nanocrystals, resulting in a high cost and less structural diversity of the ultrathin Pt nanostructures. To solve this problem, we demonstrate that ultrathin Pt nanostructures can be synthesized by templating conveniently available Ag nanocrystals without involving galvanic replacement, which enables a much-reduced cost and controllable new morphologies, such as ultrathin Pt nanoplates that expose the {111} facets. The resulting ultrathin Pt nanoplates are ∼1-2 nm in thickness, which show an ∼22-fold increase in specific activity (5.3 mA cm-2), an ∼9.5-fold increase in mass activity (1.62 A mg-1) and significantly enhanced catalytic stability in the ORR, compared with the commercial Pt/C catalyst. We believe this strategy opens a door to a highly extendable family of ultrathin noble metal nanostructures, thus promising excellent activity and stability in a broad range of catalytic applications.

Synthesis of Ultrasmall Platinum Nanoparticles on Polymer Nanoshells for Size-Dependent Catalytic Oxidation Reactions

It is highly desirable for the synthesis and stabilization of noble metal nanoparticles of uniform, precisely tunable sizes, especially in the range of angstroms to a few nanometers, for many catalytic applications in pursuit of optimal activity and selectivity. Herein, we report a novel strategy for the synthesis of uniform platinum (Pt) nanoparticles of ultrasmall sizes (average size: 0.9-2.3 nm), which are stabilized on hollow polymer nanoshells formed by polymerization of sodium dodecyl benzenesulfonate (SDBS) at the interface of an ethanol/water emulsion. The resulting composite represents a highly active catalyst for effective oxidation of alcohols under ambient conditions. Strong size-dependent catalytic activity of Pt nanoparticles has been revealed in aerobic oxidation of 1-phenylethanol to yield acetophenone, demonstrating a volcano-shape profile, with Pt nanoparticles of ∼1.7 nm showing the highest activity. The size effect has been attributed to the size-dependent d-band electron structure of the Pt nanoparticles. This work reveals the size effect of Pt nanoparticles in general organic oxidation reactions, and thus provides a general methodology and a lot of opportunities in the design of metal-nanoparticle-based catalysts for fine-chemical production.

Chloride (Cl(-)) ion-mediated shape control of palladium nanoparticles

The shape control of Pd nanoparticles is investigated using chloride (Cl(-)) ions as capping agents in an aqueous medium in the temperature range of 60-100 °C. With weakly adsorbing and strongly etching Cl(-) ions, oxygen plays a crucial role in shape control. The experimental factors considered are the concentration of the capping agents, reaction time and reaction atmosphere. Thus, Pd nanoparticles of various shapes with high selectivity can be synthesized. Moreover, the removal of Cl(-) ions from the nanoparticle surface is easier than that of Br(-) ions (moderately adsorbing and etching) and I(-) ions (strongly adsorbing and weakly etching). The cleaned Cl(-) ion-mediated shape-controlled Pd nanoparticles are electrochemically characterized and the order of the half-wave potential of the oxygen reduction reaction in oxygen-saturated 0.1 M HClO4 solution is of the same order as that observed with single-crystal Pd surfaces.

Shape-selective synthesis of NiO nanostructures for hydrazine oxidation as a nonenzymatic amperometric sensor

In this work, we demonstrate the shape-dependent electrocatalytic activity of NiO NPs towards hydrazine oxidation.

Elemental Anisotropic Growth and Atomic-Scale Structure of Shape-Controlled Octahedral Pt-Ni-Co Alloy Nanocatalysts

Multimetallic shape-controlled nanoparticles offer great opportunities to tune the activity, selectivity, and stability of electrocatalytic surface reactions. However, in many cases, our synthetic control over particle size, composition, and shape is limited requiring trial and error. Deeper atomic-scale insight in the particle formation process would enable more rational syntheses. Here we exemplify this using a family of trimetallic PtNiCo nanooctahedra obtained via a low-temperature, surfactant-free solvothermal synthesis. We analyze the competition between Ni and Co precursors under coreduction "one-step" conditions when the Ni reduction rates prevailed. To tune the Co reduction rate and final content, we develop a "two-step" route and track the evolution of the composition and morphology of the particles at the atomic scale. To achieve this, scanning transmission electron microscopy and energy dispersive X-ray elemental mapping techniques are used. We provide evidence of a heterogeneous element distribution caused by element-specific anisotropic growth and create octahedral nanoparticles with tailored atomic composition like Pt1.5M, PtM, and PtM1.5 (M = Ni + Co). These trimetallic electrocatalysts have been tested toward the oxygen reduction reaction (ORR), showing a greatly enhanced mass activity related to commercial Pt/C and less activity loss than binary PtNi and PtCo after 4000 potential cycles.

Structure and morphology of shape-controlled Pd nanocrystals

Pd nanocrystals were produced with uniform truncated-cube shape and a narrow size distribution, yielding controlled surface area fractions from low Miller index ({100}, {110}, {111}) crystalline facets. Details on the structure and morphology of the nanocrystals were obtained by combining X-ray powder diffraction line profile analysis, high-resolution transmission electron microscopy and surface electrochemistry based on Cu underpotential deposition.

Electrochemical Investigations of 4-Methoxypyridine Adsorption on Au(111) Predict Its Suitability for Stabilizing Au Nanoparticles

A thermodynamic analysis of the adsorption of 4-methoxypyridine (MOP) on Au(111) surfaces is presented in an effort to determine its propensity to stabilize metal nanoparticles. The adsorption of MOP is compared and contrasted to the adsorption of 4-dimethylaminopyridine (DMAP), the latter of which is well-known to form stable Au nanoparticles. Electrochemical studies show that MOP, like most pyridine derivatives, can exhibit two different adsorption states. The electrical state of the metal, the pH of the solution, and the surface crystallography determine whether MOP adopts a low-coverage, π-bonded orientation or a high-coverage, σ-type orientation. A modified Langmuir adsorption isotherm is used to extract free energies of adsorption which are roughly 10% stronger for DMAP compared to MOP at equivalent conditions when expressed on a rational basis. The higher adsorption strength is attributed to DMAP's greater Lewis basicity. Qualitatively, MOP and DMAP adsorption are found to be completely analogous, implying that MOP-protected gold particles should be stable under conditions that favor the high-coverage adsorption state. Using a previously reported, single-phase synthesis, this is shown to be the case.

Recent Electroanalytical Studies of Metal-Organic Frameworks: A Mini-Review

Metal-organic frameworks (MOFs) are attracting considerable attention because of their unique structural properties, such as high surface areas, tunable pore sizes, and open metal sites, which enable them to have potential applications in gas storage, catalysis, sensors, drug release, and separation. Also, MOFs can be fabricated and functionalized as electrochemically functional frameworks with perfect electrochemical properties and electrocatalytic activities. This review focuses on the electroanalytical applications of MOFs between 2010 and 2014 years.

Electrodeposition of nanoflake Pd structures: structure-dependent wettability and SERS activity

The characteristic properties of metal surfaces, i.e., wettability and surface-enhanced Raman scattering (SERS) activity, have been the subject of intensive research because of their useful applications. In the present work, we report a simple electrodeposition of nanoflake Pd structures onto clean Au surfaces without the use of additives. The fine structure of the nanoflake Pd surfaces was regulated by controlling the deposition charge, and the effect of the structural variations on the wettability and SERS activity was examined. The wettability of nanoflake Pd structures in terms of water contact angle was closely related to the fine structures of Pd deposits and their surface roughness. The SERS activity of the nanoflake Pd surfaces was highly dependent on the presence of sharp edge sites on the Pd structures. Well-defined nanoflake Pd structures prepared using a deposition charge of 0.04 C exhibited superhydrophobic natures and reproducible SERS activity. The effect of the metal surface structures on the wettability and the SERS activity demonstrated in this work provides insight into the fabrication of functional metal nanostructures.

Grain-boundary-dependent CO2 electroreduction activity

Uncovering new structure-activity relationships for metal nanoparticle (NP) electrocatalysts is crucial for advancing many energy conversion technologies. Grain boundaries (GBs) could be used to stabilize unique active surfaces, but a quantitative correlation between GBs and catalytic activity has not been established. Here we use vapor deposition to prepare Au NPs on carbon nanotubes (Au/CNT). As deposited, the Au NPs have a relatively high density of GBs that are readily imaged by transmission electron microscopy (TEM); thermal annealing lowers the density in a controlled manner. We show that the surface-area-normalized activity for CO2 reduction is linearly correlated with GB surface density on Au/CNT, demonstrating that GB engineering is a powerful approach to improving the catalytic activity of metal NPs.

Why Pt Survives but Pd Suffers From SOx Poisoning?

Pd is more prone to sulfation compared to Pt. Given the chemical similarity between Pt and Pd, the radical divide in their tendencies for sulfation remains a puzzle. We explain this intriguing difference using an extensive first-principles thermodynamics analysis and computed bulk and surface phase diagrams. In practically relevant temperatures and O2 and SO3 partial pressures, we find that Pt and Pd show significantly different tendencies for oxidation and sulfation. PdO formation is favored even at low oxygen chemical potential; however, PtO2 formation is not favorable in catalytically relevant conditions. Similarly, PdSO4, and adsorbed SO3 and oxygen species on clean and oxidized surfaces are highly favored, whereas PtSO4 formation does not occur at typical temperature and pressure conditions. Finally, several descriptors are identified that correlate to heightened sulfation tendencies, such as the critical O chemical potential for bulk oxide and surface oxide formation, chemical potentials O and SO3 for bulk sulfate formation, and SO3 binding strength on metal surface-oxide layers, which can be used to explore promising sulfur resistant catalysts.

Nanoparticle–electrode collisions as a dynamic seeding route for the growth of metallic nanostructures

The collisions between colloidal metal nanoparticles and a carbon electrode were explored as a dynamic method for the electrodeposition of a diverse range of electrocatalytically active Ag and Au nanostructures whose morphology is dominated by the electrostatic interaction between the charge of the nanoparticle and metal salt.