Synthesis of highly fluorescent, amine-functionalized carbon dots from biotin-modified chitosan and silk-fibroin blend for target-specific delivery of antitumor agents

Carbon dots (CDs) have been a promising theranostic tool with high biocompatibility and a tailorable fluorescence profile. Herein, we report the synthesis of highly fluorescent amine-functionalized CDs from low molecular weight chitosan (LMWC) and silk-fibroin (SF) blends. The synthesized CDs were quasi-spherical in shape with a size of 3 ± 1.5 nm. A significant increase in fluorescent intensity and quantum yield was achieved upon increasing the SF content due to nitrogen doping. For inducing target specificity to cancer cells, biotin was covalently conjugated to the CDs, and the conjugation was determined by FTIR spectroscopy. The conjugate was further loaded with 5-fluorouracil (5-FU) as a model anti-cancer drug. The MTT assay showed increased cytotoxicity of the conjugated CDs in cancer cells compared to normal cells. The live-cell imaging in MCF-7 cell lines showed bright blue-colored fluorescence and increased internalization of the conjugated CDs than the non-conjugate ones due to receptor-mediated endocytosis.

Thermoresponsive oligo(ethylene glycol) methyl ether methacrylate based copolymers: composition and comonomer effect

Thermoresponsive polymers based on oligo(ethylene glycol) (OEG) methyl ether methacrylate monomers from unimers to micelles to precipitation.

Biotin-decorated all-HPMA polymeric micelles for paclitaxel delivery

To avoid poly(ethylene glycol)-related issues of nanomedicines such as accelerated blood clearance, fully N-2-hydroxypropyl methacrylamide (HPMAm)-based polymeric micelles decorated with biotin for drug delivery were designed. To this end, a biotin-functionalized chain transfer agent (CTA), 4-cyano-4-[(dodecylsulfanylthiocarbonyl)-sulfanyl]pentanoic acid (biotin-CDTPA), was synthesized for reversible addition-fragmentation chain-transfer (RAFT) polymerization. Amphiphilic poly(N-2-hydroxypropyl methacrylamide)-block-poly(N-2-benzoyloxypropyl methacrylamide) (p(HPMAm)-b-p(HPMAm-Bz)) with molecular weights ranging from 8 to 24 kDa were synthesized using CDTPA or biotin-CDTPA as CTA and 2,2'-azobis(2-methylpropionitrile) as initiator. The copolymers self-assembled in aqueous media into micelles with sizes of 40-90 nm which positively correlated to the chain length of the hydrophobic block in the polymers, whereas the critical micelle concentrations decreased with increasing hydrophobic block length. The polymer with a molecular weight of 22.1 kDa was used to prepare paclitaxel-loaded micelles which had sizes between 61 and 70 nm, and a maximum loading capacity of around 10 wt%. A549 lung cancer cells overexpressing the biotin receptor, internalized the biotin-decorated micelles more efficiently than non-targeted micelles, while very low internalization of both types of micelles by HEK293 human embryonic kidney cells lacking the biotin receptor was observed. As a consequence, the paclitaxel-loaded micelles with biotin decoration exhibited stronger cytotoxicity in A549 cells than non-targeted micelles. Overall, a synthetic pathway to obtain actively targeted poly(ethylene glycol)-free micelles fully based on a poly(HPMAm) backbone was established. These polymeric micelles are promising systems for the delivery of hydrophobic anticancer drugs.

Poly(N,N-bis(2-methoxyethyl)acrylamide), a thermoresponsive non-ionic polymer combining the amide and the ethyleneglycolether motifs

Poly(N,N-bis(2-methoxyethyl)acrylamide) (PbMOEAm) featuring two classical chemical motifs from non-ionic water-soluble polymers, namely, the amide and ethyleneglycolether moieties, was synthesized by reversible addition fragmentation transfer (RAFT) polymerization. This tertiary polyacrylamide is thermoresponsive exhibiting a lower critical solution temperature (LCST)–type phase transition. A series of homo- and block copolymers with varying molar masses but low dispersities and different end groups were prepared. Their thermoresponsive behavior in aqueous solution was analyzed via turbidimetry and dynamic light scattering (DLS). The cloud points (CP) increased with increasing molar masses, converging to 46 °C for 1 wt% solutions. This rise is attributed to the polymers’ hydrophobic end groups incorporated via the RAFT agents. When a surfactant-like strongly hydrophobic end group was attached using a functional RAFT agent, CP was lowered to 42 °C, i.e., closer to human body temperature. Also, the effect of added salts, in particular, the role of the Hofmeister series, on the phase transition of PbMOEAm was investigated, exemplified for the kosmotropic fluoride, intermediate chloride, and chaotropic thiocyanate anions. A pronounced shift of the cloud point of about 10 °C to lower or higher temperatures was observed for 0.2 M fluoride and thiocyanate, respectively. When PbMOEAm was attached to a long hydrophilic block of poly(N,N-dimethylacrylamide) (PDMAm), the cloud points of these block copolymers were strongly shifted towards higher temperatures. While no phase transition was observed for PDMAm-b-pbMOEAm with short thermoresponsive blocks, block copolymers with about equally sized PbMOEAm and PDMAm blocks underwent the coil-to-globule transition around 60 °C.

High-throughput physicochemical analysis of thermoresponsive polymers

A novel high-throughput approach to rapidly measure the lower critical solution temperature, critical micelle concentration and critical micelle temperature of thermoresponsive polymers was developed and utilized to generate a physicochemical ‘MAP’ of a polymer series.

Control of aggregation temperatures in mixed and blended cytocompatible thermoresponsive block co-polymer nanoparticles

A small library of thermoresponsive amphiphilic copolymers based on polylactide-block-poly((2-(2-methoxyethoxy)ethyl methacrylate)-co-(oligoethylene glycol methacrylate)) (PLA-b-P(DEGMA)-co-(OEGMA)), was synthesised by copper-mediated controlled radical polymerisation (CRP) with increasing ratios of OEGMA : DEGMA. These polymers were combined in two ways to form nanoparticles with controllable thermal transition temperatures as measured by particle aggregation. The first technique involved the blending of two (PLA-b-P(DEGMA)-co-(OEGMA)) polymers together prior to assembling nanoparticles (NPs). The second method involved mixing pre-formed nanoparticles of single (PLA-b-P(DEGMA)-co-(OEGMA)) polymers. The observed critical aggregation temperature T_t did not change in a linear relationship with the ratios of each copolymer either in the nanoparticles blended from different copolymers or in the mixtures of pre-formed nanoparticles. However, where co-polymer mixtures were based on (OEG)₉MA ratios within 5-10 mole%, a linear relationship between (OEG)₉MA composition in the blends and T_t was obtained. The data suggest that OEGMA-based copolymers are tunable over a wide temperature range given suitable co-monomer content in the linear polymers or nanoparticles. Moreover, the thermal transitions of the nanoparticles were reversible and repeatable, with the cloud point curves being essentially invariant across at least three heating and cooling cycles, and a selected nanoparticle formulation was found to be readily endocytosed in representative cancer cells and fibroblasts.

Preparation and UCST-Type Phase Behaviours of Poly(γ-4-methylbenzyl-L-glutamate) Pyridinium Tetrafluoroborate Conjugates in Methanol or Water

Polymers with ionic liquid (IL) moieties can undergo thermally induced solution phase transitions by adjusting the balance of hydrophilicity and hydrophobicity between the cations and anions of the IL moieties, thus making them attractive candidates towards various applications such as separation, sensing, and biomedicine. In the present study, a series of poly(γ-4-methylbenzyl-l-glutamate) pyridinium tetrafluoroborate conjugates (P1–P4) containing various pyridinium moieties (i.e. pyridinium, 2-methylpyridinium, 3-methylpyridinium, and 4-methylpyridinium) were prepared by nucleophilic substitution between poly(γ-4-chloromethylbenzyl-l-glutamate) and pyridine or methylpyridines with different substituent positions, followed by ion-exchange reaction in the presence of NaBF4. 1H NMR spectroscopy and Fourier transform infrared spectroscopy analyses confirmed the molecular structures of P1–P4. 1H NMR analysis additionally revealed that P1–P4 showed high grafting efficiency in the range of 93–97 %. P1, P3, and P4 exhibited reversible UCST-type phase behaviours in both methanol and water, whereas P2 showed a reversible UCST-type phase behaviour in water only. Variable-temperature UV-visible spectroscopy was used to characterize the solution phase behaviours and UCST-type phase transition temperature (Tpt) values of P1–P4, which were in the range of 24.9–37.2°C in methanol (3 mg mL–1) and 40.9–55.7°C in water (10 mg mL–1). Tpt decreased significantly with decreasing polymer concentrations.

Thermoresponsive Polymers and Inverse Opal Hydrogels for the Detection of Diols

Responsive inverse opal hydrogels functionalized by boroxole moieties were synthesized and explored as sensor platforms for various low molar mass as well as polymeric diols and polyols, including saccharides, glycopolymers and catechols, by exploiting the diol induced modulation of their structural color. The underlying thermoresponsive water-soluble copolymers and hydrogels exhibit a coil-to-globule or volume phase transition, respectively, of the LCST-type. They were prepared from oligoethylene oxide methacrylate (macro)monomers and functionalized via copolymerization to bear benzoboroxole moieties. The resulting copolymers represent weak polyacids, which can bind specifically to diols within an appropriate pH window. Due to the resulting modulation of the overall hydrophilicity of the systems and the consequent shift of their phase transition temperature, the usefulness of such systems for indicating the presence of catechols, saccharides, and glycopolymers was studied, exploiting the diol/polyol induced shifts of the soluble polymers' cloud point, or the induced changes of the hydrogels' swelling. In particular, the increased acidity of benzoboroxoles compared to standard phenylboronic acids allowed performing the studies in PBS buffer (phosphate buffered saline) at the physiologically relevant pH of 7.4. The inverse opals constructed of these thermo- and analyte-responsive hydrogels enabled following the binding of specific diols by the induced shift of the optical stop band. Their highly porous structure enabled the facile and specific optical detection of not only low molar mass but also of high molar mass diol/polyol analytes such as glycopolymers. Accordingly, such thermoresponsive inverse opal systems functionalized with recognition units represent attractive and promising platforms for the facile sensing of even rather big analytes by simple optical means, or even by the bare eye.

Synthesis of amphiphilic semigrafted pseudo-Pluronics for self-assemblies carrying indomethacin

Influence of PEG length and OPG grafting density on self-assembly, particle size, drug loading content and release rate has been verified.

Hydrogel-driven paper-based microfluidics

Paper-based microfluidics provide an inexpensive, easy to use technology for point-of-care diagnostics in developing countries. Here, we combine paper-based microfluidic devices with responsive hydrogels to add an entire new class of functions to these versatile low-cost fluidic systems. The hydrogels serve as fluid reservoirs. In response to an external stimulus, e.g. an increase in temperature, the hydrogels collapse and release fluid into the structured paper substrate. In this way, chemicals that are either stored on the paper substrate or inside the hydrogel pads can be dissolved, premixed, and brought to reaction to fulfill specific analytic tasks. We demonstrate that multi-step sequences of chemical reactions can be implemented in a paper-based system and operated without the need for external precision pumps. We exemplify this technology by integrating an antibody-based E. coli test on a small and easy to use paper device.

Influence of backbone conformational rigidity in temperature-sensitive amphiphilic supramolecular assemblies

Molecular design features that endow amphiphilic supramolecular assemblies with a unique temperature-sensitive transition have been investigated. We find that conformational rigidity in the backbone is an important feature for eliciting this feature. We also find that intramolecular hydrogen-bonding can induce such rigidity in amphiphile backbone. Guest encapsulation stability of these assemblies was found to be significantly altered within a narrow temperature window, which correlates with the temperature-sensitive size transition of the molecular assembly. Molecular design principles demonstrated here could have broad implications in developing future temperature-responsive systems.

Responsive inverse opal hydrogels for the sensing of macromolecules

Dual responsive inverse opal hydrogels were designed as autonomous sensor systems for (bio)macromolecules, exploiting the analyte-induced modulation of the opal's structural color. The systems that are based on oligo(ethylene glycol) macromonomers additionally incorporate comonomers with various recognition units. They combine a coil-to-globule collapse transition of the LCST type with sensitivity of the transition temperature toward molecular recognition processes. This enables the specific detection of macromolecular analytes, such as glycopolymers and proteins, by simple optical methods. While the inverse opal structure assists the effective diffusion even of large analytes into the photonic crystal, the stimulus responsiveness gives rise to strong shifts of the optical Bragg peak of more than 100 nm upon analyte binding at a given temperature. The systems' design provides a versatile platform for the development of easy-to-use, fast, and low-cost sensors for pathogens.

Smart hybrid materials by conjugation of responsive polymers to biomacromolecules

The chemical structure and function of biomacromolecules has evolved to fill many essential roles in biological systems. More specifically, proteins, peptides, nucleic acids and polysaccharides serve as vital structural components, and mediate chemical transformations and energy/information storage processes required to sustain life. In many cases, the properties and applications of biological macromolecules can be further expanded by attaching synthetic macromolecules. The modification of biomacromolecules by attaching a polymer that changes its properties in response to environmental variations, thus affecting the properties of the biomacromolecule, has led to the emergence of a new family of polymeric biomaterials. Here, we summarize techniques for conjugating responsive polymers to biomacromolecules and highlight applications of these bioconjugates reported so far. In doing so, we aim to show how advances in synthetic tools could lead to rapid expansion in the variety and uses of responsive bioconjugates.

Towards being genuinely smart: ‘isothermally-responsive’ polymers as versatile, programmable scaffolds for biologically-adaptable materials

Thermo-responsive polymers are of broad interest in a range of biomedical and biotechnological fields. This review summaries the use of ‘isothermal’ transitions where thermo-responsive polymers are re-programmed to respond to other stimuli, but with the same outputs, with the aim of making them ‘smarter’.

Detection of thermoresponsive polymer phase transition in dilute low-volume format by microscale thermophoretic depletion

Environmentally responsive polymers are becoming increasingly important in the biomaterials field for use as diagnostic reagents, drug carriers, and tissue engineering scaffolds. Characterizing polymer phase transitions by cloud point curves typically requires large milliliter volumes of sample at high micromolar solution concentrations. Here we present a method based on quantification of thermophoretic Soret diffusion that allows determination of polymer phase transitions using only ~1 μL of liquid at dilute nanomolar concentrations, effectively reducing the amount of sample required by a factor of 10(6). We prepared an oligo(ethylene glycol) (OEG) methyl ether methacrylate copolymer via RAFT polymerization. End-group modification with fluorescent BODIPY-maleimide provided a dye-labeled pOEG-BODIPY conjugate with a lower critical solution temperature (LCST) in the range of ~25-35 °C. Thermophoresis measurements in dilute solution demonstrated a marked change in polymer thermodiffusion in the vicinity of the LCST. We measured the temperature dependence of thermodiffusion and transformed these data sets into sigmoidal curves characterizing the phase transition of the polymer. Finite element modeling suggested a correction to the measured values that brought the transition temperatures measured by thermophoresis into accord with the cloud point curves. Our results demonstrate that observation of polymer thermodiffusion in a low volume dilute format is a facile method for determining polymer phase transition temperatures.

Stimuli-Responsive Polymer-Antibody Conjugates via RAFT and Tetrafluorophenyl Active Ester Chemistry

Highly efficient polymer-antibody conjugations were demonstrated via a tetrafluorophenyl active ester. A well-defined diblock copolymer was synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization with a temperature-responsive block, poly(N-isopropylacrylamide), and a block of N,N-dimethylacrylamide and 2,3,5,6-tetrafluorophenyl acrylate active ester. The polymer was conjugated to anti-p24 IgG antibody with about 100% efficiency in as little as 2 h at room temperature in a pH 10.8 buffer. The temperature-responsiveness of the polymer was conferred to the polymer-antibody conjugates after conjugation. The conjugates bound p24 antigen specifically and with binding efficiency comparable to native antibodies. Thus, the active ester diblock copolymer can facilitate the synthesis of temperature-responsive bioconjugates, which may be promising reagents for immunoassays, bioseparations, and specimen-enrichment applications.