Advances in PEG-based ABC terpolymers and their applications

ABC terpolymers are a class of very important polymers because of their expansive molecular topologies and extensive architectures. As block A, poly(ethylene glycol) (PEG) is one of the most principal categories owing to good biocompatibility and wide commercial availability. More importantly, the synthetic approaches of ABC terpolymers using PEG as a macroinitiator are facile and varied. PEG-based ABC terpolymers from design and synthesis to applications are highlighted in this review. Linear, 3-miktoarm, and cyclic polymers as the architecture are separated. The synthetic approaches of PEG-based ABC terpolymers mainly include the sequential polymerization or coupling of polymers. PEG-based ABC terpolymers have wide applications in the fields of drug carriers, gene vectors, templates for the fabrication of inorganic hollow nanospheres, and stabilizers of metal nanoparticles.

Ethylene/vinyl acetate-based macrocycles via organometallic-mediated radical polymerization and CuAAC ‘click’ reaction

Sequential organometallic-mediated radical polymerization and copper-catalyzed Huisgen dipolar cycloaddition ring-closure led to unique vinyl acetate and ethylene-containing macrocycles.

Olefin cross metathesis and ring-closing metathesis in polymer chemistry

The use of olefin cross metathesis in preparing functional polymers, through either pre-functionalisation of monomers or post-polymerisation functionalisation is growing in both scope and breadth, as discussed in this review article.

Formation and Properties of Vesicles from Cyclic Amphiphilic PS-PEO Block Copolymers

Linear polystyrene-poly(ethylene oxide)-polystyrene (PS-PEO-PS) block copolymers and corresponding cyclized PS-PEO counterparts with three different PS molecular weights were synthesized and self-assembled to investigate the effects arising from the topology. Linear PS₅-PEO₄₅-PS₅ (L1) and cyclic PS₁₀-PEO₄₅ (C1) formed micelles. As previously reported for poly(n-butyl acrylate) and PEO block copolymers, the micelles from C1 showed more than 30 °C higher phase transition temperature (cloud point, T_c) than those from L1. Linear PS₁₀-PEO₄₅-PS₁₀ (L2) and cyclic PS₂₀-PEO₄₅ (C2) resulted in the formation of a structure called large compound micelles. Self-assembly of linear PS₄₀-PEO₄₈-PS₄₀ (L3) and cyclic PS₈₆-PEO₄₈ (C3) lead to the formation of vesicles. The vesicles were characterized by TEM, DLS, and SLS. Remarkably, the vesicles from L3 (T_c = 69, 59, and 48 °C in the presence of 1, 5, and 10 wt % of NaCl, respectively) were found to be somewhat more thermally stable than those from C3 (T_c = 62, 52, and 43 °C in the presence of 1, 5, and 10 wt % of NaCl, respectively). This trend of the thermal stability was counterintuitively opposed to the case of the micelles. Moreover, T_c of the vesicles was controlled by the ratio of L3 and C3.

A straightforward approach for the one-pot synthesis of cyclic polymers from RAFT polymers via thiol–Michael addition

A straightforward approach for the synthesis of cyclic polymers in a one-pot reaction.

Efficient synthesis of well-defined cyclic polystyrenes using anionic polymerization, silicon chloride linking chemistry and metathesis ring closure

An efficient method for the synthesis of well-defined cyclic polystyrenes using anionic polymerization, silicon chloride linking chemistry, and metathesis ring closure has been developed.

Cyclic polymers revealing topology effects upon self-assemblies, dynamics and responses

A variety of single- and multicyclic polymers having programmed chemical structures with guaranteed purity have now become obtainable owing to a number of synthetic breakthroughs achieved in recent years. Accordingly, a broadening range of studies has been undertaken to gain updated insights on fundamental polymer properties of cyclic polymers in either solution or bulk, in either static or dynamic states, and in self-assemblies, leading to unusual properties and functions of polymer materials based on their cyclic topologies. In this article, we review recent studies aiming to achieve distinctive properties and functions by cyclic polymers unattainable by their linear or branched counterparts. We focus, in particular, on selected examples of unprecedented topology effects of cyclic polymers upon self-assemblies, dynamics and responses, to highlight current progress in Topological Polymer Chemistry.

Advanced Developments in Cyclic Polymers: Synthesis, Applications, and Perspectives

Due to the topological effect, cyclic polymers demonstrate different and unique physical and biological properties in comparison with linear counterparts having the same molecular-weight range. With advanced synthetic and analytic technologies, cyclic polymers with different topologies, e.g. multicyclic polymers, have been reported and well characterized. For example, various cyclic DNA and related structures, such as cyclic duplexes, have been prepared conveniently by click chemistry. These types of DNA have increased resistance to enzymatic degradation and have high thermodynamic stability, and thus, have potential therapeutic applications. In addition, cyclic polymers have also been used to prepare organic-inorganic hybrids for applications in catalysis, e.g. catalyst supports. Due to developments in synthetic technology, highly pure cyclic polymers could now be produced in large scale. Therefore, we anticipate discovering more applications in the near future. Despite their promise, cyclic polymers are still less explored than linear polymers like polyolefins and polycarbonates, which are widely used in daily life. Some critical issues, including controlling the molecular weight and finding suitable applications, remain big challenges in the cyclic-polymer field. This review briefly summarizes the commonly used synthetic methodologies and focuses more on the attractive functional materials and their biological properties and potential applications.

Cyclic polymers based on UV-induced strain promoted azide–alkyne cycloaddition reaction

A unique ring-closure method was developed for the preparation of cyclic polymers based on the combination of atom transfer radical polymerization and UV-induced strain promoted azide–alkyne cycloaddition reaction.

A ring-closure method for preparing cyclic polymers from unconjugated vinyl monomers

A unique ring-closure method was developed specifically focusing on the preparation of cyclic polymers derived from unconjugated vinyl monomers by combining RAFT/MADIX living polymerization technique and UV-induced SPAAC click reaction.

Structural Characteristics of Amphiphilic Cyclic and Linear Block Copolymer Micelles in Aqueous Solutions

The structural characteristics of aqueous micelles composed of amphiphilic cyclic poly(n-butyl acrylate-b-ethylene oxide) (cyclic PBA-b-PEO) or a linear analogue (i.e., linear poly(n-butyl acrylate-b-ethylene oxide-b-n-butyl acrylate) (linear PBA-b-PEO-b-PBA)) were examined for the first time using synchrotron X-ray scattering techniques and quantitative data analysis. The scattering data were analyzed using a variety of methodologies in a comprehensive complementary manner. These analyses provided details of the structural information about the micelles. Both micelles were found to consist of a core and a fuzzy shell; however, the cyclic block copolymer had a strong tendency to form micelles with core and shell parts that were more compact and dense than the corresponding parts of the linear block copolymer micelles. The PBA block of the cyclic copolymer was found to form a hydrophobic core with a density that exceeded the density of the homopolymer in the bulk state. The structural differences originated primarily from the topological difference between the cyclic and linear block copolymers. The elimination of the chain end groups (which introduced entropy and increased the excess excluded volume) from the amphiphilic block copolymer yielded more stable dense micelles in solution.

PEG-Polypeptide Dual Brush Block Copolymers: Synthesis and Application in Nanoparticle Surface PEGylation

Amphiphilic polypeptide-containing hybrid dual brush block copolymers with controlled molecular weights and narrow molecular weight distributions were synthesized in one pot via ring-opening metathesis polymerization of sequentially added norbornyl-PEG and N-(2-((trimethylsilyl)amino)ethyl)-5-norbornene-endo-2,3-dicarboximide (M1) followed by ring-opening polymerization of amino acid N-carboxyanhydrides. Polylactide nanoparticles coated with these am phiphilic dual brush block copolymers showed significantly improved stability in PBS solution compared to those coated with amphiphilic linear block copolymers such as PEG-polylactide and PEG-polypeptides.

Tuneable enhancement of the salt and thermal stability of polymeric micelles by cyclized amphiphiles

Cyclic molecules provide better stability for their aggregates. Typically in nature, the unique cyclic cell membrane lipids allow thermophilic archaea to inhabit extreme conditions. By mimicking the biological design, the robustness of self-assembled synthetic nanostructures is expected to be improved. Here we report topology effects by cyclized polymeric amphiphiles against their linear counterparts, demonstrating a drastic enhancement in the thermal, as well as salt stability of self-assembled micelles. Furthermore, through coassembly of the linear and cyclic amphiphiles, the stability was successfully tuned for a wide range of temperatures and salt concentrations. The enhanced thermal/salt stability was exploited in a halogen exchange reaction to stimulate the catalytic activity. The mechanism for the enhancement was also investigated. These topology effects by the cyclic amphiphiles offer unprecedented opportunities in polymer materials design unattainable by traditional means.

Synthesis of Orientationally Isomeric Cyclic Stereoblock Polylactides with Head-to-Head and Head-to-Tail Linkages of the Enantiomeric Segments

A pair of orientationally isomeric cyclic stereoblock polylactides (PLAs) possessing head-to-head (HH) and head-to-tail (HT) linkages between the poly(l-lactide) (PLLA) and poly(d-lactide) (PDLA) segments was synthesized through click chemistry and ring-closing metathesis (RCM) of three asymmetrically functionalized telechelic precursors. Thus, α-ethenyl-ω-azido-PLLA (2a) was reacted with α-ethenyl-ω-ethynyl-PDLA (2b) and α-ethynyl-ω-ethenyl-PDLA (2c) via click chemistry to form ethenyl telechelic stereoblock PLAs with HH and HT orientations (3a and 3b), respectively. The subsequent RCM produced cyclic stereoblock PLAs with the corresponding linking manners (4a and 4b). The effect of the topology on the melting temperature of the series of isomeric linear and cyclic PLAs having the contrastive linking orientations was systematically investigated.