Regulating Alkyl Chain Length on Quaternization TiO2 for Boosting Photocatalytic Performance: Synergism of Promoting Photogenerated Charge Separation and Improving Reactant Adsorption

To explore the effect of surface charge properties of a photocatalyst on photocatalytic activity, quaternization TiO₂ particles with different alkyl chain lengths (CT-X/P25) are first synthesized to boost the photocatalytic activity. The effect of a quaternary ammonium group with different alkyl chain lengths on the photocatalytic activity of CT-X/P25 is investigated. Interestingly, the introduction of a quaternary ammonium group on CT-X/P25 not only contributes to improving the photodegradation efficiency of anionic dyes due to enhancing of adsorption capacity through electrostatic attraction, but also it can improve the photodegradation efficiency of cationic dyes. Therefore, there seems to be another factor affecting the photocatalytic activity. The results of photoelectric characterization show that the photogenerated charge separation of CT-X/P25 is greatly enhanced, which is beneficial to improve the photocatalytic activity. Simultaneously, the results show that the difference in the photocatalytic activity of CT-X/P25 is mainly related to the charge intensity of -N⁺(CH₃)₂- in the quaternary amine salt. According to X-ray photoelectron spectroscopy, the charge intensity of -N⁺(CH₃)₂- in CT-X/P25 gradually increases with the increase in alkyl chain lengths, which is conducive to promoting photogenerated charge separation and improving the adsorption for anionic dyes. The photocatalytic activity has been further enhanced due to the enhancement of this synergy. In summary, the quaternary ammonium salt-modified CT-X/P25 shows an excellent synergistic effect on the process of photodegradation of anionic dyes: promoting photogenerated charge separation and adsorption.

Preparation of TiO2-Poly(3-Chloro-2-Hydroxypropyl Methacrylate) Nanocomposite for Selective Adsorption and Degradation of Dyes

We report a new nanocomposite TiO2-poly(3-chloro-2-hydroxypropyl methacrylate) (TiO2-PCHPMA) for selective adsorption/degradation of cationic dyes and degradation of anionic dyes. TiO2-PCHPMA was prepared by free radical polymerization of CHPMA in the presence of TiO2 modified with 3-(trimethoxysilyl)propyl methacrylate. TiO2-PCHPMA adsorbed cationic methylene blue (MB), but did not adsorb anionic methyl orange (MO) in their aqueous solutions. The adsorption efficiency for MB reached 99% within 5 min at 28 °C, and adsorbed MB could be recycled in 96% efficiency. The adsorption accelerated degradation of MB under UV irradiation. The degradation of anionic MO proceeded completely with TiO2-PCHPMA under UV irradiation, and the efficiency was not affected by the PCHPMA layer. TiO2-PCHPMA is potentially applicable as a material capable of selective removal and recovery of cationic dyes, and degradation of other dyes from industrial effluents.

pH-Mediated Collective and Selective Solar Photocatalysis by a Series of Layered Aurivillius Perovskites

Semiconductor photocatalysis under natural sunlight is an emergent area in contemporary materials research, which has attracted considerable attention toward the development of catalysts for environmental remediation using solar energy. A series of five-layer Aurivillius-phase perovskites, Bi₅ATi₄FeO₁₈ (A = Ca, Sr, and Pb), are synthesized for the first time. Rietveld refinements of the powder X-ray diffraction data indicated orthorhombic structure for the Aurivillius phases with Fe largely occupying the central octahedral layer, whereas the divalent cations (Ca, Sr, and Pb) are statistically distributed over the cubo-octahedral A-sites of the perovskite. The compounds with visible-light-absorbing ability (E _g ranging from ∼2.0 to 2.2 eV) not only exhibit excellent collective photocatalytic degradation of rhodamine B-methylene blue (MB) and rhodamine B-rhodamine 6G mixture at pH 2 but also show almost 100% photocatalytic selective degradation of MB from the rhodamine B-MB mixture at pH 11 under natural solar irradiation. The selectivity in the alkaline medium is believed to originate from the combined effect of the photocatalytic degradation of MB by the Aurivillius-phase perovskites and the photolysis of MB. Although a substantial decrease in MB adsorption from the mixed dye solution (MB + RhB) together with slower MB photolysis at the neutral pH makes the selective MB degradation sluggish, the compounds showed excellent photocatalytic degradation activity and chemical oxygen demand removal efficacy toward individual RhB (at pH 2) and MB (at pH 11) under sunlight irradiation. The catalysts are exceptionally stable and retain good crystallinity even after five successive cyclic runs without any noticeable loss of activity in both the acidic and alkaline media. The present work provides an important insight into the development of layered perovskite photocatalysts for collective degradation of multiple pollutants and selective removal of one or multiple pollutants from a mixture. The later idea may open up new possibilities for recovery/purification of useful chemical substances from the contaminated medium through selective photocatalysis.

Photocatalytic partial oxidation of limonene to 1,2 limonene oxide

The silylation of crystalline TiO₂ P25, commonly used for photocatalytic degradation of pollutants, results in an exceptionally selective catalyst for the aerobic limonene epoxidation to 1,2-limonene oxide under solar light irradiation. The hypothesized mechanism involves the singlet oxygen generated through energy transfer from the excited TiO₂ to adsorbed O₂ molecules. The reaction product is the valued precursor of bio-based poly(limonene carbonate), a thermoplastic polymer of superior thermal and optical properties whose industrial production is in need of an efficient green synthesis of limonene oxide.

Supercritical CO2-assisted deposition of NiO on (101)-anatase-TiO2 for efficient facet engineered photocatalysts

Deposition of NiO on the (101) facet of anatase nanocrystals by the SFCD route yields nanocomposites more efficient than pure anatase TiO₂ for the photodecomposition of both anionic and cationic dyes.

Phenylamine-Functionalized rGO/TiO2 Photocatalysts: Spatially Separated Adsorption Sites and Tunable Photocatalytic Selectivity

The preferential adsorption of targeted contaminants on a photocatalyst surface is highly required to realize its photocatalytic selective decomposition in a complex system. To realize the tunable preferential adsorption, altering the surface charge or polarity property of photocatalysts has widely been reported. However, it is quite difficult for a modified photocatalyst to realize the simultaneously preferential adsorption for both cationic and anionic dyes. In this study, to realize the selective adsorption for both cationic and anionic dyes on a photocatalyst surface, the negative reduced graphene oxide (rGO) nanosheets and positive phenylamine (PhNH₂) molecules are successfully loaded on the TiO₂ surface (PhNH₂/rGO-TiO₂) with spatially separated adsorption sites, where the negative rGO and positive PhNH₂ molecules work as the preferential adsorption sites for cationic and anionic dyes, respectively. It was interesting to find that although all the TiO₂ samples (including the naked TiO₂, PhNH₂/TiO₂, rGO-TiO₂, and PhNH₂/rGO-TiO₂) clearly showed a better adsorption performance for cationic dyes than anionic dyes, only the PhNH₂/rGO-TiO₂ with spatially separated adsorption-active sites exhibited an opposite photocatalytic selectivity, namely, the naked TiO₂, PhNH₂/TiO₂, and rGO-TiO₂ showed a preferential decomposition for cationic dyes, while the resultant PhNH₂/rGO-TiO₂ exhibited an excellently selective decomposition for anionic dyes. In addition, the resultant PhNH₂/rGO-TiO₂ photocatalyst not only realizes the tunable photocatalytic selectivity but also can completely and sequentially decompose the opposite cationic and anionic dyes.

Investigation on the mechanism of non-photocatalytically TiO2 -induced reactive oxygen species and its significance on cell cycle and morphology

Titanium dioxide (TiO2 ) nanoparticles are widely used in daily human life, and were reported to elicit biological effects such as oxidative stress either generating reactive oxygen species (ROS) or causing cell necrosis without generating ROS, whose underlying molecular mechanisms are not yet known. In this study, the role of dissolved oxygen in TiO2 catalytic activity in dark environment, and long-term cytotoxic effects of TiO2 exposure were investigated. To determine the effect of dissolved oxygen, the anatase-TiO2 nanoparticle suspension was prepared both in deoxygenated and regular MilliQ water, and a ~ 9-fold higher ROS in regular MilliQ samples was observed compared to deoxygenated samples while in the dark, which suggested dissolved oxygen as the driving agent behind the TiO2 catalytic reaction. On the other hand, the differential cell viability and endogenous ROS activity was demonstrated through a sensitive macrophage-based assay, on a dose- and time-dependent manner. Both the cell number and endogenous ROS activity increased with increase in time till 48 h, followed by a reduction at 72 h exposure period. Long-term exposures to these nanoparticles even at low concentrations were found detrimental to cells, where late apoptosis until 48 h and necrosis at 72 h leading to cell death were noted. Late apoptotic events and cell membrane cytoskeletal actin rearrangement observed were hypothesized to be induced by particle-mediated cellular ROS. This in addition to radical generation ability of TiO2 in the dark will help further in better understanding of the toxicity mechanism in cells beyond ROS generation. Copyright © 2016 John Wiley & Sons, Ltd.

Synthesis of morphology-controlled bismutite for selective applications

Bismutite (Bi₂O₂CO₃) possessing diverse morphologies, namely, nanosheets, nanodiscs and nanoplatelets, was synthesized by a simple controllable method shows excellent materials as adsorbents and photocatalysts for wastewater treatment with supercapacitor activities for energy applications.

Alcohol-Selective Oxidation in Water under Mild Conditions via a Novel Approach to Hybrid Composite Photocatalysts

The oxidation of alcohols to carbonyl compounds in a clean fashion (i.e., with water as a solvent or under solvent‐free conditions, and using O₂ or H₂O₂ as the primary oxidant) is the subject of considerable research efforts. A new approach for the selective oxidation of soluble aromatic alcohols in water under mild conditions via a novel composite photocatalyst has been developed. The catalyst is synthesized by grafting 4‐(4‐(4‐hydroxyphenylimino)cyclohexa‐2,5dienylideneamino)phenol and silver nanoparticles onto the surface of moderately crystalline titanium dioxide. The titanium dioxide‐based composite was first extensively characterized and then employed in the catalytic oxidation of 4‐methoxybenzyl alcohol to 4‐methoxybenzaldehyde under UV irradiation in water at room temperature. The corresponding aldehyde was obtained with unprecedented high selectivity (up to 86 %). The method is general and opens the route to fabrication of photocatalytic composites based on titanium dioxide functionalized with shuttle organic molecules and metal nanoparticles for a variety of oxidative conversions.

Topotactic growth, selective adsorption, and adsorption-driven photocatalysis of protonated layered titanate nanosheets

Layered titanates with selective adsorption ability and adsorption-driven photocatalytic property can be quite attractive due to their potential applications in water purification. In this work, lepidocrocite-like layered protonated titanate (H2Ti2O5·H2O, denoted as HTO) nanosheets were successfully synthesized by an ion-exchange process. It turns out that this layered structure displays an abundant and selective adsorption toward the fluoroquinolone pharmaceutical compared with some large dye molecules due to a size selectivity of the interlayer spacing of HTO and the molecular horizontal size, as well as their electrostatic interaction. The uptake ability of HTO could be readily controlled through adjusting the pH values of adsorbate solution, and the maximum uptake capacity was achieved at the pH value of about 5.5 for ciprofloxacin (CIP) and 6.5 for moxifloxacin (MOX). The adsorption amount of smaller nalidixic acid (NAL) showed an increasing tendency as the pH value decreased. Moreover, the two-dimensional layered crystal structure also permits such HTO nanosheets to have a large percentage of (010) faces exposed, which is considerably provided by the interlayer surfaces of these nanosheets. The (010) surface has a similar Ti and O atomic arrangement as to the highly reactive anatase TiO2(001) one. Due to these specific characteristics, these HTO nanosheets show excellent photocatalytic activity in degrading CIP under UV light irradiation as well as possess a superior adsorption ability to remove CIP from aqueous solution selectively and efficiently. The photocatalytic reaction is believed to be mainly conducted on the active anatase (001)-like interlayer (010) surfaces of the layered structures since the as-prepared HTO performs an adsorption-driven molecular recognitive photocatalytic reaction.

A facile and efficient preparation of anatase titania nanoparticles in micelle nanoreactors: morphology, structure, and their high photocatalytic activity under UV light illumination

Comparative photocatalysis degradation of MB dye under ultraviolet light irradiation: (a) without photocatalyst; (b) commercial P25 TiO₂ powder; and (c) TiO₂ nanoparticles.

Selective photoelectrocatalytic degradation of recalcitrant contaminant driven by an n-P heterojunction nanoelectrode with molecular recognition ability

With in situ molecular imprinting technique, a novel nanoelectrode (MI, n-P)-TiO(2) with n-P heterojunction and molecular recognition ability was fabricated by liquid phase deposition at low temperature. Using bisphenol A (BPA) as template, the spindle-like TiO(2) particles 40-80 nm in size compactly grew on the boron-doped diamond (BDD) substrate. Several spectroscopy measurements demonstrate that the BPA molecules were successfully imprinted on the TiO(2) matrix and numerous specific recognition sites to template were formed after calcination. The transient photocurrent response experiments have confirmed that the (MI, n-P)-TiO(2) nanoelectrode displays outstanding photoelectrocatalytic (PEC) activity and selectivity. The (MI, n-P)-TiO(2) is further employed in degrading the mixture containing BPA and interference 2-naphthol (2-NP). After 2 h, BPA removal reaches 97%, and corresponding kinetic constant is 1.76 h(-1), which is 4.6 times that of 2-NP removal even if 2-NP is much more concentrated. On the electrode without molecular imprint, the removal rate constants of BPA and 2-NP approximately equal, only about 0.5 h(-1). The results indicate that selective PEC oxidation can be realized readily on the (MI, n-P)-TiO(2) nanoelectrode due to the synergetic effects including strong recognition adsorption, formation of n-P heteojunction, and external electrostatic field. The effect of formation of n-P heterojunction on the enhanced PEC performances is also discussed.