Synthesis of organic solvent-free nitrogen-doped carbon quantum dots as unique green fluorimetric probes for analysis of abrocitinib in human plasma

Atopic dermatitis (AD) is a persistent, inflammatory skin condition that impacts approximately 15 to 20% of children and 1 to 3% of adults globally. Common skin manifestations include papules, papulovesicular, and brown or red patches with swelling, crusting, and flaking. Therefore, the drug abrocitinib (ABR) was approved by the US FDA as an oral treatment for atopic dermatitis. The present study outlines the development of innovative, thermostable, and pH-stable organic solvent-free nitrogen-doped carbon dots (N@CQDs) synthesized through a one-step method for evaluating ABR with a notable quantum yield of 33.84% to minimize the use of organic solvents. Their cost-effectiveness, eco-friendly characteristics, and outstanding photocatalytic properties have established them as a promising alternative to conventional luminescent techniques like fluorescent dyes and luminous derivatization technique. The reaction of ABR with N@CQDs led to a significant decrease in the luminescent response of the produced green and stable carbon quantum dots at 513 nm. The detection range was determined to be 1.0-150.0 ng mL-1, with a lower limit of quantitation (LOQ) equal to 0.52 ng mL-1 based on the linear graph. The green method effectively used for analysis of ABR in pharmaceutical tablets and pharmacokinetic study with high sensitivity.

An Innovative Selective Fluorescence Sensor for Quantification of Hazardous Food Colorant Allura Red in Beverages Using Nitrogen-Doped Carbon Quantum Dots

An innovative simple, sensitive, and selective method has been developed and validated for quantification of hazardous Allura red (AR, E129) dye in beverages. Allura red (AR) is a synthetic dye that is commonly used in the food industry to give foods a bright and appealing color. The method is based on microwave-assistant nitrogen-doped carbon quantum dots (N@CQDs) from a very cheap source with a high quantum yield equal to (36.60%). The mechanism of the reaction is based on an ion-pair association complex between AR and nitrogen-doped carbon quantum dots (N@CQDs) at pH 3.2. The reaction between AR and N@CQDs led to a quenching effect of the fluorescence intensity of N@CQDs at 445 nm after excitation at 350 nm. Moreover, the quantum method's linearity covered the range between 0.07 and 10.0 µg mL- 1 with a regression coefficient is 0.9992. The presented work has been validated by ICH criteria. High-resolution transmission electron microscopy (HR-TEM), X-ray photon spectroscopy (XPS), Zeta potential measurements, fluorescence, UV-VIS, and FTIR spectroscopy have all been used to fully characterize of the N@CQDs. The N@CQDs were successfully utilized in different applications (beverages) with high accuracy.

A critical review of textile industry wastewater: green technologies for the removal of indigo dyes

The denim textile industry represents an important productive sector. It generates wastewater with low biodegradability due to the presence of persistent pollutants, which can produce toxic and carcinogenic compounds; therefore, wastewater treatment reduces risks to aquatic life and public health. This paper presents a review of 172 papers regarding textile industry wastewater treatment for the removal of contaminants, especially indigo dyes used in the denim industry, in the context of green technologies. The physicochemical characteristics of textile wastewater, its environmental and health impacts, and the permissible limit regulations in different countries were reviewed. Biological, physicochemical and advanced oxidation processes for the removal of indigo dyes were reviewed. The goal of this study was to analyze the characteristics of green technologies; however, the research does not clearly demonstrate an effect on energy consumption savings, carbon footprint decreases, and/or waste generation. Advanced oxidation processes showed the highest color removal efficiency (95 and 97% in synthetic or real wastewater, respectively). Photocatalysis and Fenton reactions were the most efficient processes. None of the revised works presented results regarding upscaling for industrial application, and the results should be discussed in terms of the guidelines and maximum permissible limits established by international legislation. New technologies need to be developed and evaluated in a sustainable context with real wastewater.

Preparation and Property Characterization of In2YSbO7/BiSnSbO6 Heterojunction Photocatalyst toward Photocatalytic Degradation of Indigo Carmine within Dye Wastewater under Visible-Light Irradiation

In₂YSbO₇ and In₂YSbO₇/BiSnSbO₆ heterojunction photocatalyst were prepared by a solvothermal method for the first time. The structural characteristics of In₂YSbO₇ had been represented. The outcomes showed that In₂YSbO₇ crystallized well and possessed pyrochlore constitution, a stable cubic crystal system and space group Fd3m. The lattice parameter of In₂YSbO₇ was discovered to be a = 11.102698 Å and the band gap energy of In₂YSbO₇ was discovered to be 2.68 eV, separately. After visible-light irradiation of 120 minutes (VLGI-120M), the removal rate (ROR) of indigo carmine (IC) reached 99.42% with In₂YSbO₇/BiSnSbO₆ heterojunction (IBH) as a photocatalyst. The ROR of total organic carbon (TOC) reached 93.10% with IBH as a photocatalyst after VLGI-120M. Additionally, the dynamics constant k which was taken from the dynamic curve toward (DCT) IC density and VLGI time with IBH as a catalyst reached 0.02950 min^-1. The dynamics constant k which came from the DCT TOC density and VLGI time with IBH as a photocatalyst reached 0.01783 min^-1. The photocatalytic degradation of IC in dye wastewater (DW) with IBH as a photocatalyst under VLGI was in accordance with the first-order kinetic curves. IBH was used to degrade IC in DW for three cycles of experiments under VLGI, and the ROR of IC reached 98.74%, 96.89% and 94.88%, respectively, after VLGI-120M, indicating that IBH had high stability. Compared with superoxide anions or holes, hydroxyl radicals possessed the largest oxidative ability for removing IC in DW, as demonstrated by experiments with the addition of trapping agents. Lastly, the probable degradation mechanism and degradation pathway of IC were revealed in detail. The results showed that a visible-light-responsive heterojunction photocatalyst which possessed high catalytic activity and a photocatalytic reaction system which could effectively remove IC in DW were obtained. This work provided a fresh scientific research idea for improving the performance of a single catalyst.

Enhanced adsorptive removal of indigo carmine dye by bismuth oxide doped MgO based adsorbents from aqueous solution: equilibrium, kinetic and computational studies

The IC adsorption mechanism on the Bi2O3 doped MgO nanosorbents occurred through the chemisorption process.

Novel and wet-resilient cellulose nanofiber cryogels with tunable porosity and improved mechanical strength for methyl orange dyes removal

Interconnected macro-porous cryogels with robust and pore-tunable structures have been fabricated using chemically crosslinked microfibrillated cellulose (MFC). Periodate oxidation was initially conducted to introduce aldehyde groups into the MFC surface, followed by the freeze-induced chemical crosslinking via the formation of hemiacetal bonds between aldehyde and hydroxyl at -12 °C. The cryogels with pore-tunable structures and sharply enhanced mechanical strengths were finally achieved by re-assembly of MFCs through soaking in NaIO₄ solution. Furthermore, the MFC cryogels were post-crosslinked by polyethyleneimine (PEI), bestowing the cryogels with the capability of adsorbing anionic dyes. The stress of the PEI-MFC cryogel at the 80% strain was determined to be 304.5 kPa, which is the maximum value for the nanocellulose-based cryogels reported so far. Finally, the adsorption performances of PEI-MFC cryogels for methyl orange (MO) were evaluated. Maximum adsorption capacity of 500 mg/g could be obtained by the Langmuir model, outperforming that of previous absorbent materials. Reuse experiments indicated that over 90% of adsorption capacity was retained after 6 cycles. Continuous clean-up experiments demonstrated excellent MO removal abilities of the PEI-MFC cryogel. This study shows that the novel, green strategy to fabricate the robust cryogel extends the practical applications of nanocellulose adsorbents for environmental remediation.

Colorimetric and fluorometric nanoprobe for selective and sensitive recognition of hazardous colorant indigo carmine in beverages based on ion pairing with nitrogen doped carbon dots

Indigo carmine (IC) dye is hazardous and allergenic for humans even though it has been excessively used in a wide range of industries. Therefore, the quantitative determination of IC is still challenging. Herein, for the first time, we have developed fluorometric and colorimetric dual-mode nanoprobe derived from the ion-pair association complex between the negatively charged IC and positively charged N@C-dots in pH = 3.0. Consequently, the binding between N@C-dots and IC resulted in cyan blue and quenching of N@C-dots fluorescence. The dependence of the fluorescence response on IC concentrations was linear over the range of 0.73-10.0 µM (R² = 0.9989) with LOD of 0.24 µM. On the other hand, the linearity of the colorimetric method ranged from 9.97 to 80.0 µM (R² = 0.9986) with LOD of 3.3 µM. The sensor was applied for estimation of IC in fruit juice and soft drink without the need for exhaustive extraction steps.

Modified Electrospun Polymeric Nanofibers and Their Nanocomposites as Nanoadsorbents for Toxic Dye Removal from Contaminated Waters: A Review

Electrospun polymer nanofibers (EPNFs) as one-dimensional nanostructures are characterized by a high surface area-to-volume ratio, high porosity, large number of adsorption sites and high adsorption capacity. These properties nominate them to be used as an effective adsorbent for the removal of water pollutants such as heavy metals, dyes and other pollutants. Organic dyes are considered one of the most hazardous water pollutants due to their toxic effects even at very low concentrations. To overcome this problem, the adsorption technique has proven its high effectiveness towards the removal of such pollutants from aqueous systems. The use of the adsorption technique depends mainly on the properties, efficacy, cost and reusability of the adsorbent. So, the use of EPNFs as adsorbents for dye removal has received increasing attention due to their unique properties, adsorption efficiency and reusability. Moreover, the adsorption efficiency and stability of EPNFs in aqueous media can be improved via their surface modification. This review provides a relevant literature survey over the last two decades on the fabrication and surface modification of EPNFs by an electrospinning technique and their use of adsorbents for the removal of various toxic dyes from contaminated water. Factors affecting the adsorption capacity of EPNFs, the best adsorption conditions and adsorption mechanism of dyes onto the surface of various types of modified EPNFs are also discussed. Finally, the adsorption capacity, isotherm and kinetic models for describing the adsorption of dyes using modified and composite EPNFs are discussed.

Adsorption of indigo carmine on functional chitosan and β-cyclodextrin/chitosan beads: Equilibrium, kinetics and mechanism studies

The present study was designed to produce novel cross-linked Chitosan and Chitosan/β-Cyclodextrin beads and study the adsorption of Indigo Carmine. Both adsorbents were characterized by SEM and FTIR techniques. Batch experiments were conducted in order to evaluate the effect of initial adsorbent's concentration, dye's initial concentration, initial pH and temperature. In all cases Chitosan/β-Cyclodextrin crosslinked beads exhibited higher removal efficiency of Indigo Carmine. Higher removal rates of Indigo Carmine were observed at low values of dye's initial concentration, pH and temperature, and high concentrations of adsorbent. The equilibrium adsorption data were a good fit for both Langmuir and Freundlich models and maximum adsorption capacity was 500.0 and 1000.0 mg_IC/g_adsorbent for Chitosan and Chitosan/β-Cyclodextrin crosslinked beads, respectively. Adsorption of Indigo Carmine was found to follow the pseudo-second order. The negative values of ΔG^o, ΔH^o and ΔS^o indicate that the adsorption process is exothermic, spontaneous and favorable at low temperatures.

The fabrication of a thiol-modified chitosan magnetic graphene oxide nanocomposite and its adsorption performance towards the illegal drug clenbuterol in pork samples

A novel thiol (provided by (3-mercaptopropyl) trimethoxysilane, MPTS)-modified chitosan magnetic graphene oxide nanocomposite (Fe₃O₄@SiO₂/GO/CS/MPTS) was synthesized and characterized for the first time as an efficient magnetic sorbent for the enrichment and extraction of trace levels of clenbuterol in pork samples (muscle, fat, heart and liver). Various greatly influential parameters were optimized using a Box-Behnken design (BBD) through the response surface methodology (RSM) to obtain more satisfactory recovery. Under optimum conditions, the method detection limits (MDLs) were in the range of 0.054-0.136 ng g^-1. The recoveries of three spiked levels ranged from 84.7% to 101.1%, and the relative standard deviations (RSDs) were lower than 9.3%. The results of the adsorption experiments showed that the maximum adsorption capacity of Fe₃O₄@SiO₂/GO/CS/MPTS for clenbuterol was 214.13 mg g^-1. The adsorption process was most consistent with pseudo second-order kinetics and Langmuir adsorption isotherm, indicating a homogeneous process with a chemisorptive nature. Also, the nanocomposite exhibited high adsorption capability for clenbuterol compared with Fe₃O₄@SiO₂/GO and Fe₃O₄@SiO₂/GO/CS. In addition, regeneration of the nanocomposite was effectively achieved, and it retained about 82% of its initial capacity after four cycles. All these results indicate that the synthetic nanocomposite is a promising efficient adsorbent for the adsorption of clenbuterol with high adsorption capacity and low cost.

In situ growth of ZIF-8 nanoparticles on chitosan to form the hybrid nanocomposites for high-efficiency removal of Congo Red

The zeolitic imidazole framework (ZIF-8) dotted chitosan (CS) nanocomposites (ZIF-8@CS) were fabricated via in-situ growth method. The morphology, structure and chemical state of ZIF-8@CS were investigated by scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray photoelectron spectroscopy (XPS), Fourier transform IR spectroscopy (FTIR) and X-ray diffraction (XRD). The adsorption behavior of ZIF-8@CS composites on Congo Red (CR) in aqueous solution was systematically investigated. The adsorption isotherm data showed that the adsorption of CR by ZIF-8@CS was single-layer adsorption, which was consistent with the Langmuir isotherm model. The maximum adsorption capacity of ZIF-8@CS was 922 mg/g. The kinetics parameters were in accord with pseudo-second-order equation, which implied that the adsorption rate was mainly controlled by the chemisorption mechanism. The removal of CR was attributed to the participation of hydrogen bonds, electrostatic interactions, π-π conjugation and zinc coordination effects.

Environmentally Friendly Gelatin/β-Cyclodextrin Composite Fiber Adsorbents for the Efficient Removal of Dyes from Wastewater

In this paper, environmentally friendly gelatin/β-cyclodextrin (β-CD) composite fiber adsorbents prepared by electrospinning were used for the removal of dyes from wastewater. Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and a universal materials tester were employed to characterize the internal structures, surface morphologies and mechanical strength of the composite fiber adsorbents. Additionally, the fiber was evaluated as an adsorbent for the removal of methylene blue (MB) from aqueous solution. The effects of the raw material ratio, pH, temperature, concentration and adsorption time were studied. The results show that the gelatin/β-CD composite fiber adsorbents possess excellent mechanical strength and high adsorption efficiency for MB. The adsorption equilibrium and adsorption kinetics are well-described by the Langmuir isotherm model and the pseudo-second-order kinetic model, respectively. The theoretical maximum adsorption capacity is 47.4 mg·g-1. Additionally, after nine successive desorption-adsorption cycles, the removal rate is still over 70%. Moreover, the gelatin/β-CD composite fiber adsorbents exhibit excellent adsorption capability for basic fuchsin, gentian violet, brilliant blue R and malachite green dyes. Therefore, owing to the characteristics of degradability, low cost and high-efficiency, the gelatin/β-CD composite fiber can be used as an efficient adsorbent for the removal of dyes from wastewater.

Karaya gum-graft-poly(2-(dimethylamino)ethyl methacrylate) gel: An efficient adsorbent for removal of ionic dyes from water

In the present study, a novel hydrogel based on the polysaccharide, 'Karaya gum' has been synthesised by graft copolymerization and evaluated as an adsorbent for the removal of ionic dyes from aqueous solution. The hydrogel was made by simultaneous grafting and cross linking of Karaya gum using 2-(dimethylamino)ethyl methacrylate (DMAEMA) and N,N'-methylene-bis-acrylamide via microwave irradiation. The graft copolymer gel was characterized by FTIR, TGA, SEM techniques. The swelling of the gel studied in buffer media of varying pH revealed a pH responsive behaviour with a maximum swelling in neutral pH and a minimum swelling at pH 1.2. The temperature dependent swelling study indicated 40 °C as the lowest critical solution temperature. Kinetic studies indicated the swelling to be a second order process with Fickian diffusion as the water transport mechanism. The adsorption studies indicated maximum adsorption capacity of 89.28 and 101.42 mg/g towards methylene blue and indigo carmine respectively. The dye adsorption data is found to fit well with pseudo- second order kinetic model and the Freundlich adsorption isotherm model. The adsorption was found to be a multistep process with surface adsorption followed by intraparticle diffusion. Thermodynamic studies revealed the adsorption of dyes to be spontaneous.

Boronic acid as an efficient anchor group for surface modification of solid polyvinyl alcohol

We report the use of boronic acid as an anchor group for surface modification of solid polyvinyl alcohol (PVA); the surfaces of PVA microparticles, films, and nanofibers were chemically modified with boronic acid-appended fluorescent dyes through boronate esterification using a simple soaking technique in a short time under ambient conditions.

Surface modified composite nanofibers for the removal of indigo carmine dye from polluted water

Surface coated magnetite nanoparticles (Fe₃O₄ NPs) with 3-mercaptopropionic acid were immobilized on amidoximated polyacrilonitrile (APAN) nanofibers using electrospinning followed by crosslinking. The prepared composite nanofibers were characterized with Scanning Electron Microscopy (SEM), and Fourier Transform Infrared analysis (FTIR). The composite nanofiber was evaluated for the removal of indigo carmine dye from aqueous solutions. The effects of contact time, initial dye concentration, solution pH and adsorption equilibrium isotherms were studied. The adsorption of indigo carmine was found to be greatly affected by solution pH. The maximum loading capacity was determined to be 154.5 mg g⁻¹ at pH = 5. The experimental kinetic data were fitted well using a pseudo-first order model. The adsorption isotherm studies showed that the adsorption of indigo carmine fits well with the Langmuir model. The reuse of the composite nanofiber was also investigated in which more than 90% of indigo carmine was recovered in 5 min. The results of stability studies showed that the adsorption efficiency can remain almost constant (90%) after five consecutive adsorption/desorption cycles.

Surface coated magnetite nanoparticles (Fe₃O₄ NPs) with 3-mercaptopropionic acid were immobilized on amidoximated polyacrilonitrile (APAN) nanofibers using electrospinning followed by crosslinking.

Simultaneous regulation of morphology, crystallization, thermal stability and adsorbability of electrospun polyamide 6 nanofibers via graphene oxide and chemically reduced graphene oxide

The spinnable concentration range, crystalline structure and performance of polyamide 6 nanofibers were modulated simultaneously via GO and RGO.

Superabsorbent enhanced-catalytic core/shell nanocomposites hydrogels for efficient water decolorization

In-situ inverse-emulsion polymerization and crosslinking of acrylamide in presence of metal oxides nanoparticles producing core/shell hydrogel nanocomposites for water decolorization.

Surface molecularly imprinted polymers grafted on ordered mesoporous carbon nanospheres for fuel desulfurization

By adopting OMCNS as a carrier, the corresponding desulfurization adsorbent SMIP/OMCNS possesses excellent adsorption capacity and selectivity towards DBT.

Improved photocatalytic activity of CdSe-nanocomposites: effect of Montmorillonite support towards efficient removal of Indigo Carmine

To ascertain the contribution of adsorptive capacity of Montmorillonite (MMT) towards photocatalytic process, CdSe-MMT nanocomposites are explored for adsorptive removal of Indigo Carmine (IC). The nanocomposites are prepared via two approaches: (a) in-situ formation and (b) wet impregnation of CdSe onto MMT support. XRD analysis of composites suggested the proper dispersion of CdSe nanoparticles in MMT clay matrix with spherical morphology of 5-10nm sized CdSe nanoparticles. These nanocomposites are employed for photocatalytic degradation of IC under visible light at various IC concentrations and different amount of catalyst. Kinetics of IC is found to be of pseudo-second order with 10% in-situ and 50% loaded nanocomposites exhibiting better photocatalytic activity at 1.0 g L(-)(1) catalyst and 100 mg L(-)(1)of IC. Dynamics of its adsorptive removal on the composite surface evaluated by employing error estimation tools clearly suggest that Redlich-Peterson and Flory-Huggins adsorption isotherms effectively describe the multi-layer process. It is observed that spontaneous, exothermic chemisorption process occurring on the surface indeed enhances photocatalytic activity. Moreover, such a feature is also found to be associated with diffusion of IC within mesoporous structure of MMT that subsequently favors pore-diffusion controlled adsorption process. IR spectral analysis demonstrated that IC molecule is degraded on the catalyst surface. Light or oxygenated species induced photocorrosion of CdSe is suppressed due to its composite formation with MMT that results in 620 ppm removal of IC during successive cycles; a feature ascribed as improved photocatalytic activity for CdSe nanoparticles.