3D Self-Supported Nitrogen-Doped Carbon Nanofiber Electrodes Incorporated Co/CoOx Nanoparticles: Application to Dyes Degradation by Electro-Fenton-Based Process

We developed free-standing nitrogen-doped carbon nanofiber (CNF) electrodes incorporating Co/CoO_x nanoparticles (NPs) as a new cathode material for removing Acid Orange 7 (AO7; a dye for wool) from wastewater by the heterogeneous electro-Fenton reaction. We produced the free-standing N-doped CNF electrodes by electrospinning a polyacrylonitrile (PAN) and cobalt acetate solution followed by thermal carbonation of the cobalt acetate/PAN nanofibers under a nitrogen atmosphere. We then investigated electro-Fenton-based removal of AO7 from wastewater with the free-standing N-doped-CNFs-Co/CoO_x electrodes, in the presence or not of Fe²⁺ ions as a co-catalyst. The electrochemical analysis showed the high stability of the prepared N-doped-CNF-Co/CoO_x electrodes in electrochemical oxidation experiments with excellent degradation of AO7 (20 mM) at acidic to near neutral pH values (3 and 6). Electro-Fenton oxidation at 10 mA/cm² direct current for 40 min using the N-doped-CNF-Co/CoO_x electrodes loaded with 25 wt% of Co/CoO_x NPs led to complete AO7 solution decolorization with total organic carbon (TOC) removal values of 92.4% at pH 3 and 93.3% at pH 6. The newly developed N-doped-CNF-Co/CoO_x electrodes are an effective alternative technique for wastewater pre-treatment before the biological treatment.

Electro-conductive carbon nanofibers containing ferrous sulfate for bone tissue engineering

The application of electroactive scaffolds can be promising for bone tissue engineering applications. In the current paper, we aimed to fabricate an electro-conductive scaffold based on carbon nanofibers (CNFs) containing ferrous sulfate. FeSO₄·7H₂O salt with different concentrations 5, 10, and 15 wt%, were blended with polyacrylonitrile (PAN) polymer as the precursor and converted to Fe₂O3/CNFs nanocomposite by electrospinning and heat treatment. The characterization was conducted using SEM, EDX, XRD, FTIR, and Raman methods. The results showed that the incorporation of Fe salt induces no adverse effect on the nanofibers' morphology. EDX analysis confirmed that the Fe ions are uniformly dispersed throughout the CNF mat. FTIR spectroscopy showed the interaction of Fe salt with PAN polymer. Raman spectroscopy showed that the incorporation of FeSO4·7H₂O reduced the ID/IG ratio, indicating more ordered carbon in the synthesized nanocomposite. Electrical resistance measurement depicted that, although the incorporation of ferrous sulfate reduced the electrical conductivity, the conductive is suitable for electrical stimulation. The in vitro studies revealed that the prepared nanocomposites were cytocompatible and only negligible toxicity (less than 10%) induced by CNFs/Fe₂O₃ fabricated from PAN FeSO₄·7H₂O 15%. Although various nanofibrous composite fabricated with Fe NPs have been evaluated for tissue engineering applications, CNFs exhibited promising properties, such as excellent mechanical strength, biocompatibility, and electrical conductivity. These results showed that the fabricated nanocomposites could be applied as the bone tissue engineering scaffold.

Atomic layer deposition of Pd nanoparticles on self-supported carbon-Ni/NiO-Pd nanofiber electrodes for electrochemical hydrogen and oxygen evolution reactions

The most critical challenge in hydrogen fuel production is to develop efficient, eco-friendly, low-cost electrocatalysts for water splitting. In this study, self-supported carbon nanofiber (CNF) electrodes decorated with nickel/nickel oxide (Ni/NiO) and palladium (Pd) nanoparticles (NPs) were prepared by combining electrospinning, peroxidation, and thermal carbonation with atomic layer deposition (ALD), and then employed for hydrogen evolution and oxygen evolution reactions (HER/OER). The best CNF-Ni/NiO-Pd electrode displayed the lowest overpotential (63 mV and 1.6 V at j = 10 mA cm^-2), a remarkably small Tafel slope (72 and 272 mV dec^-1), and consequent exchange current density (1.15 and 22.4 mA cm^-2) during HER and OER, respectively. The high chemical stability and improved electrocatalytic performance of the prepared electrodes can be explained by CNF functionalization via Ni/NiO NP encapsulation, the formation of graphitic layers that cover and protect the Ni/NiO NPs from corrosion, and ALD of Pd NPs at the surface of the self-supported CNF-Ni/NiO electrodes.

Flexible NiO-Graphene-Carbon Fiber Mats Containing Multifunctional Graphene for High Stability and High Specific Capacity Lithium-Ion Storage

An electrode's conductivity, ion diffusion rate, and flexibility are critical factors in determining its performance in a lithium-ion battery. In this study, NiO-carbon fibers were modified with multifunctional graphene sheets, resulting in flexible mats. These mats displayed high conductivities, and the transformation of active NiO to inert Ni(0) was effectively prevented at relatively low annealing temperatures in the presence of graphene. The mats were also highly flexible and contained large gaps for the rapid diffusion of ions, because of the addition of graphene sheets. The flexible NiO-graphene-carbon fiber mats achieved a reversible capacity of 750 mA h/g after 350 cycles at a current density of 500 mA/g as the binder-free anodes of lithium-ion batteries. The mats' rate capacities were also higher than those of either the NiO-carbon fibers or the graphene-carbon fibers. This work should provide a new route toward improving the mechanical properties, conductivities, and stabilities of mats using multifunctional graphene.

Reduction of charge and discharge polarization by cobalt nanoparticles-embedded carbon nanofibers for Li-O2 batteries

The problem of high charge polarization is one of the most significant challenges in current nonaqueous Li-O2 batteries. The development of an electrode for the oxygen evolution reaction (OER) at reduced overpotential is thus essential. Here, we suggest a binder-free electrode based on Co nanoparticles embedded in carbon nanofibers (Co-CNFs), which simultaneously reduces the charge and discharge polarization and extends cycling stability. Co-CNF gives rise to a lower discharge polarization because of an enhanced oxygen reduction reaction activity compared to Co-free CNF. Although the embedment of Co does not enhance the OER activity, it significantly reduces charge overvoltage by forming easily decomposable amorphous Li2 O2 . A mechanism for the formation of amorphous Li2 O2 is suggested in terms of charge localization induced by the Co NPs. The findings suggest a new electrode design strategy of combining inexpensive metals and carbon materials for modulating the phase of the discharge product.

Design and Synthesis of Bubble-Nanorod-Structured Fe2O3-Carbon Nanofibers as Advanced Anode Material for Li-Ion Batteries

A structure denoted as a "bubble-nanorod composite" is synthesized by introducing the Kirkendall effect into the electrospinning method. Bubble-nanorod-structured Fe2O3-C composite nanofibers, which are composed of nanosized hollow Fe2O3 spheres uniformly dispersed in an amorphous carbon matrix, are synthesized as the target material. Post-treatment of the electrospun precursor nanofibers at 500 °C under 10% H2/Ar mixture gas atmosphere produces amorphous FeOx-carbon composite nanofibers. Post-treatment of the FeOx-carbon composite nanofibers at 300 °C under air atmosphere produces the bubble-nanorod-structured Fe2O3-C composite nanofibers. The solid Fe nanocrystals formed by the reduction of FeOx are converted into hollow Fe2O3 nanospheres during the further heating process by the well-known Kirkendall diffusion process. The discharge capacities of the bubble-nanorod-structured Fe2O3-C composite nanofibers and hollow bare Fe2O3 nanofibers for the 300th cycles at a current density of 1.0 A g(-1) are 812 and 285 mA h g(-1), respectively, and their capacity retentions measured from the second cycle are 84 and 24%, respectively. The hollow nanospheres accommodate the volume change that occurs during cycling. The unique structure of the bubble-nanorod-structured Fe2O3-C composite nanofibers results in their superior electrochemical properties by improving the structural stability during long-term cycling.

Characterization and electrochemical properties of a nickel film/carbon paper electrode prepared by a filtered cathodic vacuum arc technique

SEM spectrum of bare CP in low magnification (A), bare CP of cross-sectional views (B), bare CP in high magnification (C), Ni/CP in high magnification (D) and EDS spectrum of bare CP (E) and Ni/CP electrode (F).

Chemically anchored NiOx–carbon composite fibers for Li-ion batteries with long cycle-life and enhanced capacity

NiO_x nanoparticles are chemically anchored on carbon fiber networks to obtain binder-free anodes with high properties for Li⁺ storage.

α-Fe2O3 nanoparticle-loaded carbon nanofibers as stable and high-capacity anodes for rechargeable lithium-ion batteries

α-Fe(2)O(3) nanoparticle-loaded carbon nanofiber composites were fabricated via electrospinning FeCl(3)·6H(2)O salt-polyacrylonitrile precursors in N,N-dimethylformamide solvent and the subsequent carbonization in inert gas. Scanning electron microscopy, transmission electron microscopy, energy dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, X-ray diffraction, and elemental analysis were used to study the morphology and composition of α-Fe(2)O(3)-carbon nanofiber composites. It was indicated that α-Fe(2)O(3) nanoparticles with an average size of about 20 nm have a homogeneous dispersion along the carbon nanofiber surface. The resultant α-Fe(2)O(3)-carbon nanofiber composites were used directly as the anode material in rechargeable lithium half cells, and their electrochemical performance was evaluated. The results indicated that these α-Fe(2)O(3)-carbon nanofiber composites have high reversible capacity, good capacity retention, and acceptable rate capability when used as anode materials for rechargeable lithium-ion batteries.