Determination of low concentrations of glucose through colorimetric analysis using CoFe2O4 magnetic catalyst and SAT-3

Natural enzyme mimics have attracted attention as alternatives to natural peroxidases. Among these, magnetic nanoparticles, especially ferrites, have attracted attention because of their unique electronic and physical structures, which are expected to be applied in various fields, including high-frequency magnetic materials, biomaterials, gas sensors, and semiconductor photocatalysts. The structural properties of the synthesized catalysts were investigated using X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy, and transmission electron microscopy. The prepared CoFe2O4 exhibited a spinel ferrite structure and formed a wood-flake-like bulk structure. In this study, magnetic CoFe2O4 was prepared using a precipitation method as a natural enzyme mimetic. CoFe2O4 showed excellent peroxidase-like activity, as demonstrated by the Michaelis-Menten constant (Km) and the maximum velocity (Vmax). The linear ranges of the calibration curves for H2O2 and glucose were in the range of 0-500 µM, and the detection limits were 1.83 and 5.91 µM, respectively. This analytical method was applied for the determination of glucose in human serum, and the results were satisfactory and consistent with certified values. The performance of this sensor was comparable to or superior to those of several other sensors commonly used for glucose analysis, indicating that its practical application is feasible.

A visualized sensor based on layered double hydroxides with peroxidase-like activity for sensitive acetylcholinesterase assay

Acetylcholinesterase (AChE) plays a crucial role in biological neurotransmission. The aberrant expression of AChE is associated with various neurodegenerative diseases. Therefore, it is of great significance to develop a simple and highly sensitive AChE analysis platform. Herein, a simple colorimetric sensor was constructed for sensitive detection of AChE based on the peroxidase-like catalytic activity of Ni/Co layered double hydroxides (Ni/Co LDHs). In this sensor, the fabricated Ni/Co LDHs possess high peroxidase-like activity, enabling rapid catalysis of o-phenylenediamine (OPD) to produce yellow oxOPD in the presence of H₂O₂. This peroxidase-like activity of Ni/Co LDHs was found to be effectively inhibited by the presence of AChE. It is speculated that the combination of AChE on the outer surface of Ni/Co LDHs through non-covalent interaction may cover the active sites and hinder their adsorption to the substrates, leading to the failure of OPD oxidation. As a result, the yellow color from oxOPD is related to the AChE concentration, enabling the direct AChE assay in an equipment-free manner. In addition, the fabricated Ni/Co LDHs could be modified on a paper surface to obtain a paper-based analytical device for visualized colorimetric detection of AChE. The as-proposed sensor shows high sensitivity to AChE with a detection limit down to 6.6 μU mL^-1. Therefore, this naked-eye paper-based sensor is capable of on-site and real-time detection of AChE, and has outstanding application prospects in clinical diagnosis and biomedical fields.

Advances in layered double hydroxide based labels for signal amplification in ultrasensitive electrochemical and optical affinity biosensors of glucose

Since the development of enzyme electrodes, the research area of glucose biosensing has seen outstanding progress and improvement. Numerous sensing platforms have been developed based on different immobilization techniques and improved electron transfer between the enzyme and electrode. Interestingly, these platforms have consistently used innovative nanostructures and nanocomposites. In recent years, layered double hydroxides (LDHs) have become key tools in the field of analytical chemistry owing to their outstanding features and benefits, such as facile synthesis, cost-effectiveness, substantial surface area, excellent catalytic performance, and biocompatibility. LDHs are often synthesized as nanomaterial composites or manufactured with specific three-dimensional structures. The purpose of this review is to illustrate the biosensing prospects of LDH-based glucose sensors and the need for improvement. First, various clinical and conventional approaches for glucose determination are discussed. The definitions, types, and various synthetic methodologies of LDHs are then explained. Subsequently, we discuss the various research studies regarding LDH-based electrochemical and optical assays, focusing on modified systems, improved electron transfers pathways (through developments in surface science), and different sensing designs based on nanomaterials. Finally, a summary of the current limitations and future challenges in glucose analysis is described, which may facilitate further development and applications.

Synergetic integration of catalase and Fe3O4 magnetic nanoparticles with metal organic framework for colorimetric detection of phenol

Toxic phenol pollutants pose a great threat to the environment, it is urgent to develop an efficient and recyclable method to monitor phenol. Herein, we reported the synthesis of catalase-Fe₃O₄@ZIF-8 (CAT-Fe₃O₄@ZIF-8) through a novel amino-acid-boosted one-pot embedding strategy that synergically integrated catalase and magnetic Fe₃O₄ nanoparticles with ZIF-8. As expected, CAT-Fe₃O₄@ZIF-8 exhibited enhanced catalytic activity compared with Fe₃O₄@ZIF-8, CAT@ZIF-8 and catalase. Depending on the satisfactory performance of CAT-Fe₃O₄@ZIF-8, a colorimetric detection platform for phenol based on CAT-Fe₃O₄@ZIF-8 was constructed. The corresponding detection limit was as low as 0.7 μM, and a wide linear range of 5-100 μM was obtained. Besides, CAT-Fe₃O₄@ZIF-8-based colorimetric detection platform has been verified to possess high stability and recyclability. The proposed method was proven to have potential practical applications in the field of water treatment, which would advance efficient, recyclable monitoring of water quality.

2D material-based peroxidase-mimicking nanozymes: catalytic mechanisms and bioapplications

The boom in nanotechnology brings new insights into the development of artificial enzymes (nanozymes) with ease of modification, lower manufacturing cost, and higher catalytic stability than natural enzymes. Among various nanomaterials, two-dimensional (2D) nanomaterials exhibit promising enzyme-like properties for a plethora of bioapplications owing to their unique physicochemical characteristics of tuneable composition, ultrathin thickness, and huge specific surface area. Herein, we review the recent advances in several 2D material-based nanozymes, such as carbonaceous nanosheets, metal-organic frameworks (MOFs), transition metal dichalcogenides (TMDs), layered double hydroxides (LDHs), and transition metal oxides (TMOs), clarify the mechanisms of peroxidase (POD)-mimicking catalytic behaviors, and overview the potential bioapplications of 2D nanozymes.

Nanoclay-based sensor composites for the facile detection of molecular antioxidants

A paper-based sensor containing nanoclay particles, a polyelectrolyte and a metal complex as sensing elements was developed for the facile detection of molecular antioxidants.

A review on optical sensors based on layered double hydroxides nanoplatforms

In recent years, significant efforts have been devoted towards the fabrication and application of layered double hydroxides (LDHs) due to their tremendous features such as excellent biocompatibility with negligible toxicity, large surface area, high conductivity, excellent solubility, and ion exchange properties. Most impressive, LDHs offer a favorable environment to attach several substances such as quantum dots, fluorescein dyes, proteins, and enzymes, which leads to strengthening the catalytic properties or increasing the sensing selectivity and sensitivity of the resulted hybrids. With the extensive ongoing research on the application of nanomaterials, many studies have led to remarkable achievements in exploring LDHs as sensing nanoplatforms. In optical sensors, for instance, many sensing strategies were tailored based on the enzyme-mimicking properties of LDHs, including colorimetric and chemiluminescence procedures. Meanwhile, others were designed based on intercalating some fluorogenic substrates on the LDHs, whereby the sensing signal can be acquired by quenching or enhancing their fluorescence after the addition of analytes. In this review, we aim to summarize the recent advances in optical sensors that use layered double hydroxides as sensing platforms for the determination of various analytes. By outlining some representative examples, we accentuate the change of spectral absorbance, chemiluminescence, and photoluminescence phenomena triggered by the interaction of LDH or functionalized-LDH with the indicators and analytes in the system. And finally, current limitations and possible future orientation in designing further LDHs-based optical sensors are presented. It is hoped that this review will be helpful in assisting the establishment of more improved sensors based on LDHs features. Optical sensors based on layered double hydroxides (LDHs) nanoplatforms were reviewed. The sensing system and detection approaches were rationally reviewed. Possible future orientations were highlighted.

Ultrathin NiMn layered double hydroxide nanosheets with a superior peroxidase mimicking performance to natural HRP for disposable paper-based bioassays

Ultrathin NiMn LDH was synthesized as a nanozyme for disposable paper-based bioassays, and its active centers were identified as Mn sites.

Layered Double Hydroxides in Bioinspired Nanotechnology

Layered Double Hydroxides (LDHs) are a relevant class of inorganic lamellar nanomaterials that have attracted significant interest in life science-related applications, due to their highly controllable synthesis and high biocompatibility. Under a general point of view, this class of materials might have played an important role for the origin of life on planet Earth, given their ability to adsorb and concentrate life-relevant molecules in sea environments. It has been speculated that the organic–mineral interactions could have permitted to organize the adsorbed molecules, leading to an increase in their local concentration and finally to the emergence of life. Inspired by nature, material scientists, engineers and chemists have started to leverage the ability of LDHs to absorb and concentrate molecules and biomolecules within life-like compartments, allowing to realize highly-efficient bioinspired platforms, usable for bioanalysis, therapeutics, sensors and bioremediation. This review aims at summarizing the latest evolution of LDHs in this research field under an unprecedented perspective, finally providing possible challenges and directions for future research.

An optical sensing platform based on hexacyanoferrate intercalated layered double hydroxide nanozyme for determination of chromium in water

In this work, hexacyanoferrate intercalated Ni/Al LDH (Ni/Al-Fe(CN)₆ LDH) nanozyme was synthesized by one-pot co-precipitation method and used for determination of chromium in water samples by employing its peroxidase mimicking activity. The synthesized nanozyme can effectively catalyze the oxidation of fluorometric peroxidase substrate terephthalic acid by H₂O₂ to produce a highly fluorescent product. It was found that Cr(VI) promotes the peroxidase-like activity of Ni/Al-Fe(CN)₆ LDH and this effect was intensified by increasing the Cr(VI) concentration. Several variables affecting the fluorescence intensity including the concentration of nanoparticles and reagents as well as reaction time were investigated and optimized. Under the optimal conditions, good linearity was observed in the range of 0.067-10 μM Cr(VI), and limit of detection and quantification were found to be 0.039 and 0.131 μM, respectively. Furthermore, the developed method showed good applicability for the determination of total Cr based on the oxidation of Cr (III) to Cr (VI). The applicability of the proposed method was demonstrated by analyzing various environmental water samples. The presented nanozyme displayed superior benefits in terms of reusability, repeatability, cost and environment-friendly features. The present work aims to expand LDHs based enzyme mimics to optical sensor fields.

Flexible Active-Site Engineering of Monometallic Co-Layered Double Hydroxides for Achieving High-Performance Bifunctional Electrocatalyst toward Oxygen Evolution and H2O2 Reduction

It is highly desirable but challenging to develop a facile and scalable strategy to synthesize efficient bifunctional electrocatalysts for oxygen evolution and H₂O₂ reduction by engineering the active site of monometallic-layered double hydroxides (LDHs). Herein, we developed a convenient, efficient, and scalable method for the construction of monometallic Co-LDHs with tunable Coⁿ⁺ (n = 2, 3) concentration by a one-pot solvothermal reaction in a short time (e.g., 2 and 4 h) using only cobalt nitrate and hexamine as raw materials. The catalytic performance of Co-LDHs was mainly determined by the Coⁿ⁺ (n = 2, 3) concentration, which could be simply regulated by tuning the solvothermal time. Combining the joint merits of three-dimensional flowerlike architecture (abundant accessible active sites and a fast electron/mass transport), Co-LDHs-4 with abundant Co³⁺ species exhibited an excellent electrocatalytic activity for oxygen evolution reaction in terms of a low overpotential at 10 mA cm^-2 (η₁₀ = 241 mV) and long-term durability for 70 h at 100 mA cm^-2, better than the state-of-the-art IrO₂ and most of the reported analogues. Besides, Co-LDHs-2 enriched in Co²⁺ displayed a superior electrochemical activity for H₂O₂ detection with a broad linear range (0.002-20 mM), a low detection limit (0.002 mM), and a high response sensitivity (272.02 μA mM^-1 cm^-2). Therefore, this work opens a new horizon for the rational development of a highly active electrocatalyst with tunable concentrations of active components.

Antioxidant Materials Based on 2D Nanostructures: A Review on Recent Progresses

Counteracting reactive oxygen species (ROS, e.g., superoxide radical ion, H2O2 and hydroxyl radical) is an important task in fighting against oxidative stress-related illnesses and in improving product quality in industrial manufacturing processes. This review focuses on the recent advances on two-dimensional (2D) nanomaterials of antioxidant activity, which are designed for effective decomposition of ROS and thus, for reduction of oxidative stress. Some materials featured in this paper are of uni- or multi-lamellar structures modified with small molecular or enzymatic antioxidants. Others are enzyme-mimicking synthetic compounds (the so-called nanozymes) prepared without antioxidant additives. However, carbon-based materials will not be included, as they were extensively reviewed in the recent past from similar aspects. Given the landmark development around the 2D materials used in various bio-applications, sheet-like antioxidant compounds are of great interest in the scientific and technological communities. Therefore, the authors hope that this review on the recent progresses will be helpful especially for researchers working on novel developments to substantially reduce oxidative stress either in biological systems or industrial liquors.

Electrochemical non-enzymatic glucose sensors: recent progress and perspectives

This review summarizes recent advances in the development of electrocatalysts for non-enzymatic glucose detection. The sensing mechanism and influencing factors are discussed, and the perspectives and challenges are also addressed.

FeMn layered double hydroxides: an efficient bifunctional electrocatalyst for real-time tracking of cysteine in whole blood and dopamine in biological samples

A peculiar clock-regulated design of FeMn-LDHs (FMH) with specific physiochemical attributes has been developed and used for highly sensitive detection of cysteine (CySH) and dopamine (DA).

Identifying the active site of ultrathin NiCo LDH as an efficient peroxidase mimic with superior substrate affinity for sensitive detection of hydrogen peroxide

Nanozymes have been extensively investigated to imitate protein enzymes in biomimetic chemistry and the identification of the active site is believed to be the pre-requisite before one can effectively regulate their activity. Herein, ultrathin NiCo LDH nanosheets are synthesized via a fast co-precipitation at room temperature and can be stably dispersed in water without any additives of surfactants or organic solvents. By tuning the ratio between Ni and Co in LDH nanosheets, the activity is tuned and their peroxidase-like activity is determined by Co sites that show higher affinity to both 3,3',5,5'-tetramethylbenzidine (TMB) and hydrogen peroxide (H2O2) due to the strong Lewis acidity of Co3+ and the low redox potential of Co3+/Co2+. Together with their small crystallite size, ultra-thin thickness and tunable composition, NiCo LDH is used as a nanozyme for highly sensitive colorimetric detection of H2O2 and the limit of detection (LOD) reaches 0.48 μM.

A bifunctional nonenzymatic flexible glucose microsensor based on CoFe-Layered double hydroxide

A bifunctional flexible glucose microsensor has been successfully fabricated by directly growing a layered double hydroxide nanosheet array (LDH-NSA) on Ni wire. The as-obtained CoFe-LDH-NSA exhibits promising performances in electrochemical and colorimetric detection of glucose with high sensitivity and selectivity. This work demonstrates an effective strategy to fabricate multi-functional glucose nonenzyme sensors.

Nanozymes: Classification, Catalytic Mechanisms, Activity Regulation, and Applications

Because of the high catalytic activities and substrate specificity, natural enzymes have been widely used in industrial, medical, and biological fields, etc. Although promising, they often suffer from intrinsic shortcomings such as high cost, low operational stability, and difficulties of recycling. To overcome these shortcomings, researchers have been devoted to the exploration of artificial enzyme mimics for a long time. Since the discovery of ferromagnetic nanoparticles with intrinsic horseradish peroxidase-like activity in 2007, a large amount of studies on nanozymes have been constantly emerging in the next decade. Nanozymes are one kind of nanomaterials with enzymatic catalytic properties. Compared with natural enzymes, nanozymes have the advantages such as low cost, high stability and durability, which have been widely used in industrial, medical, and biological fields. A thorough understanding of the possible catalytic mechanisms will contribute to the development of novel and high-efficient nanozymes, and the rational regulations of the activities of nanozymes are of great significance. In this review, we systematically introduce the classification, catalytic mechanism, activity regulation as well as recent research progress of nanozymes in the field of biosensing, environmental protection, and disease treatments, etc. in the past years. We also propose the current challenges of nanozymes as well as their future research focus. We anticipate this review may be of significance for the field to understand the properties of nanozymes and the development of novel nanomaterials with enzyme mimicking activities.

Nanomaterials Exhibiting Enzyme-Like Properties (Nanozymes): Current Advances and Future Perspectives

Biological enzymes are macromolecular catalysts that catalyze the biochemical reactions of the natural systems. Although each enzyme performs a particular function, however, holds several drawbacks, which limits its utilization in broad-spectrum applications. Natural enzymes require strict physiological conditions for performing catalytic functions. Their limited stability in harsh environmental conditions, the high cost of synthesis, isolation, and purification are some of the significant drawbacks. Therefore, as an alternative to natural enzymes, recently several strategies have been developed including the synthesis of molecules, complexes, and nanoparticles mimicking their intrinsic catalytic properties. Nanoparticles exhibiting the properties of an enzyme are termed as “nanozymes.” Nanozymes offer several advantages over natural enzymes, therefore, a rapid expansion of the development of artificial biocatalysts. These advantages include simple methods of synthesis, low cost, high stability, robust catalytic performance, and smooth surface modification of nanomaterials. In this context, nanozymes are tremendously being explored to establish a wide range of applications in biosensing, immunoassays, disease diagnosis and therapy, theranostics, cell/tissue growth, protection from oxidative stress, and removal of pollutants. Considering the importance of nanozymes, this article has been designed to comprehensively discuss the different enzyme-like properties, such as peroxidase, catalase, superoxide dismutase, and oxidase, exhibited by various nanoparticles.

Atomic layer deposition-assisted growth of CuAl LDH on carbon fiber as a peroxidase mimic for colorimetric determination of H2O2 and glucose

An atomic-layer-deposited Al₂O₃-induced LDH growth strategy was proposed to prepare carbon fiber-supported ultrathin CuAl LDH nanosheets (CF@CuAl-LDH). The CF@CuAl-LDH exhibited superior peroxidase-like catalytic activity.

Metal–oxygen clusters as peroxidase mimics for their multifarious applications in colorimetric sensors

Metal–oxygen cluster (Fe₂₈) was certified to own inherent peroxidase-like performance, which displayed multi-functional applications in H₂O₂, glucose and dopamine detection.

Interfacial synthesis of ultrathin two-dimensional 2PbCO3·Pb(OH)2 nanosheets with high enzyme mimic catalytic activity

Ultrathin two-dimensional 2PbCO₃·Pb(OH)₂ nanosheets have been facilely synthesized at the gas/liquid interface and exhibit higher catalytic activity as peroxidase mimetic for the oxidation of TMB.

Functional nanomaterials with unique enzyme-like characteristics for sensing applications

We highlight the recent developments in functional nanomaterials with unique enzyme-like characteristics for sensing applications.

A MnO2–[Ru(dpp)3]Cl2 system for colorimetric and fluorimetric dual-readout detection of H2O2

Two-dimensional (2D) MnO₂ nanosheets were synthesized by a template-free and one-step route, and the dye [Ru(dpp)₃]Cl₂ was linked onto the MnO₂ nanosheet surface via electrostatic interaction. The formed MnO₂–[Ru(dpp)₃]Cl₂ hybrid was used for a dual optical detection for H₂O₂, an important reactive oxygen species (ROS). Upon addition of H₂O₂, the reaction of MnO₂ with H₂O₂ results in the dissolution of MnO₂ nanosheets and simultaneous generation of O₂. The fading of the solution and simultaneous fluorescence change of [Ru(dpp)₃]Cl₂, sensitive to O₂, enables colorimetric and fluorimetric dual-mode detection of H₂O₂. The dual-output assay in a single probe provides a good sensitivity with a detection limit of 0.18 μM H₂O₂. The dual-signal strategy can efficiently overcome the shortcoming of the single detection mode, and improve the detection accuracy by an additional correction of output signals from each other. Moreover, the successful determination of H₂O₂ in the serum samples demonstrates the potential applicability of the MnO₂–[Ru(dpp)₃]Cl₂ based probe in biosensing and bioanalysis.

The MnO₂ nanosheets with anchored [Ru(dpp)₃]Cl₂ were prepared for colorimetric and fluorimetric dual-mode detection of H₂O₂.

Acidic amino acids: A new-type of enzyme mimics with application to biosensing and evaluating of antioxidant behaviour

Nanomaterials have triggered tremendous interest to mimick peroxidase but rarely attention has been paid to small molecules. Herein we first found that acidic amino acids including l-glutamic acid (L-Glu) and l-aspartic acid (L-Asp) exhibited an intrinsic peroxidase-like activity, endowing acidic amino acids with the capability of catalysing the oxidation of the peroxidase substrates 3,3',5,5'-tetramethylbenzidine (TMB) to produce color reaction in the presence of H₂O₂. Reaction mechanism was further investigated by means of electron spin resonance spectroscopy (ESR), enzyme kinetics assay and quantum theoretical calculations, to verify and provide a good deal of insight into the catalytic process. Based on the above discovery, a colorimetric platform was successfully developed for sensing glucose in the range of 0.10 μM to 10 μM with a detection limit of 40 nM, as well as evaluating the inhibitory effect of antioxidants on reactive oxygen species. This extraordinary finding not only extends the new biological function of acidic amino acids, but also opens new opportunities to deepen the knowledge of the new class of small molecule enzymes.

One-step analysis of glucose and acetylcholine in water based on the intrinsic peroxidase-like activity of Ni/Co LDHs microspheres

A one-step detection method for glucose and acetylcholine in water was developed based on the peroxidase-like activity of Ni/Co LDHs.

N,N′-Di-carboxymethyl perylene diimide functionalized magnetic nanocomposites with enhanced peroxidase-like activity for colorimetric sensing of H2O2 and glucose

Perylene diimides functionalized Fe₃O₄ nanoparticles are demonstrated to possess a higher intrinsic peroxidase-like activity than that of pure Fe₃O₄ nanoparticles.

Nano-Engineered Biomimetic Optical Sensors for Glucose Monitoring in Diabetes

Diabetes is a rapidly growing disease that can be monitored at an individual level by controlling the blood glucose level, hence minimizing the negative impact of the disease. Significant research efforts have been focused on the design of novel and improved technologies to overcome the limitations of existing glucose analysis methods. In this context, nanotechnology has enabled the diagnosis at the single cell and molecular level with the possibility of incorporation in advanced molecular diagnostic biochips. Recent years have witnessed the exploration and synthesis of various types of nanomaterials with enzyme-like properties, with their subsequent integration into the design of biomimetic optical sensors for glucose monitoring. This review paper will provide insights on the type, nature and synthesis of different biomimetic nanomaterials. Moreover, recent developments in the integration of these nanomaterials for optical glucose biosensing will be highlighted, with a final discussion on the challenges that must be addressed for successful implementation of these nano-devices in the clinical applications is presented.

Immobilization of Carbon Dots in Molecularly Imprinted Microgels for Optical Sensing of Glucose at Physiological pH

Nanosized carbon dots (CDs) are emerging as superior fluorophores for biosensing and a bioimaging agent with excellent photostability, chemical inertness, and marginal cytotoxicity. This paper reports a facile one-pot strategy to immobilize the biocompatible and fluorescent CDs (∼6 nm) into the glucose-imprinted poly(N-isopropylacrylamide-acrylamide-vinylphenylboronic acid) [poly(NIPAM-AAm-VPBA)] copolymer microgels for continuous optical glucose detection. The CDs designed with surface hydroxyl/carboxyl groups can form complexes with the AAm comonomers via hydrogen bonds and, thus, can be easily immobilized into the gel network during the polymerization reaction. The resultant glucose-imprinted hybrid microgels can reversibly swell and shrink in response to the variation of surrounding glucose concentration and correspondingly quench and recover the fluorescence signals of the embedded CDs, converting biochemical signals to optical signals. The highly imprinted hybrid microgels demonstrate much higher sensitivity and selectivity for glucose detection than the nonimprinted hybrid microgels over a clinically relevant range of 0-30 mM at physiological pH and benefited from the synergistic effects of the glucose molecular contour and the geometrical constraint of the binding sites dictated by the glucose imprinting process. The highly stable immobilization of CDs in the gel networks provides the hybrid microgels with excellent optical signal reproducibility after five repeated cycles of addition and dialysis removal of glucose in the bathing medium. In addition, the hybrid microgels show no effect on the cell viability in the tested concentration range of 25-100 μg/mL. The glucose-imprinted poly(NIPAM-AAm-VPBA)-CDs hybrid microgels demonstrate a great promise for a new glucose sensor that can continuously monitor glucose level change.

A colorimetric method of analysis for trace amounts of hydrogen peroxide with the use of the nano-properties of molybdenum disulfide

Molybdenum disulfide (MoS₂) with a layered structure was synthesized and applied for trace analysis of H₂O₂ in water based on a colorimetric method.

Carbon dot/NiAl-layered double hydroxide hybrid material: facile synthesis, intrinsic peroxidase-like catalytic activity and its application

A C-dot/NiAl–LDH hybrid material is successfully prepared with intrinsic peroxidase-like activity.