An electrochemical microsensor based on a specific recognition element for the simultaneous detection of hydrogen peroxide and ascorbic acid in the live rat brain

A novel electrochemical microsensor was developed for the ratiometric and simultaneous determination of hydrogen peroxide (H2O2) and ascorbic acid (AA) based on the borate-phenol "switch" recognition mechanism and carbon nanotube (CNT) catalytic characteristics. First of all, a carbon fiber microelectrode (CFME) was coated with CNTs. Then, a specific probe, 9-anthraceneboronic acid pinacol ester (9-AP), was screened and decorated on CNTs through π-π stacking for the recognition of H2O2 based on the transformation of boric acid ester into electroactive phenols. CNTs not only served as the amplifiers of current signals, but also as catalysts facilitating AA oxidation. Meanwhile, ferrocenecarboxylic acid (Fc), inert to H2O2 and AA, was modified on another amino-functionalized CNT microelectrode via an amide bond as an internal reference channel for avoiding errors caused by environmental discrepancies. The two-channel ratiometric microsensor enabled the sensitive and accurate detection of H2O2 and AA simultaneously, and the detection limits were estimated to be 0.09 μM and 4.12 μM, respectively. The developed microsensor with remarkable analytical performance was finally applied for the simultaneous detection of H2O2 and AA in the live rat brain.

Protonation and electronic structure of 2,6-dichlorophenolindophenolate during reduction. A theoretical study including explicit solvent

Protonation in the two-electron/two-proton reduction processes of 2,6-dichlorophenolindophenolate (DCIP) is investigated combining density functional theory (DFT) and molecular dynamics (MD) methods. DCIP (anion), DCIP^•- (radical anion), and DCIP^2- (dianion) are considered, including the electronic structure analysis from the prospective of quantum theory of atoms and molecules (QTAIM). It is shown that oxygen on the indophenolate moiety and nitrogen are the first and/or the second proton acceptor sites and their energetic order depends on the total charge of the system. MD simulations of differently charged species interacting with the solvent molecules have been performed for methanol, water, and oxonium cation (H₃O⁺). Methanol and water molecules are found to form only hydrogen bonds with the solute irrespective of its charge. The calculated pK_a values show that the imino group of DCIPH^- is a weaker acid than water. While in the case of DCIP (and DCIP^•-) plus oxonium cation, proton transfer from the solvent to the solute was evidenced for both aforementioned acceptor sites. In addition, MD simulations of bulks containing 15 and 43 molecules of water around the DCIP molecule have been performed, revealing the formation of 2-4 hydrogen bonds. Graphical Abstract 2,6-Dichlorophenolindophenolate interacts with solvent molecules (water, oxonium cation and methanol). Hydrogen transfer and electronic structure are studied by DFT and molecular dynamics methods.

Self and directed assembly: people and molecules

Self-assembly and directed-assembly are two very important aspects of supramolecular chemistry. As a young postgraduate student working in Canada with Tom Fyles my introduction to Supramolecular Chemistry was through the self-assembly of phospholipid membranes to form vesicles for which we were developing unimolecular and self-assembling transporter molecules. The next stage of my development as a scientist was in Japan with Seiji Shinkai where in a “Eureka” moment, the boronic acid templating unit (directed-assembly) of Wulff was combined with photoinduced electron transfer systems pioneered by De Silva. The result was a turn-on fluorescence sensor for saccharides; this simple result has continued to fuel my research to the present day. Throughout my career as well as assembling molecules, I have enjoyed bringing together researchers in order to develop collaborative networks. This is where molecules meet people resulting in assemblies worth more than the individual “molecule” or “researcher”. My role in developing networks with Japan was rewarded by the award of a Daiwa-Adrian Prize in 2013 and I was recently rewarded for developing networks with China with an Inaugural CASE Prize in 2015.

Fluorescence probe for the convenient and sensitive detection of ascorbic acid

Ascorbic acid is an important antioxidant that plays an essential role in the biosynthesis of numerous bioactive substances. The detection of ascorbic acid has traditionally been achieved using high-performance liquid chromatography and absorption spectrophotometry assays. However, the development of fluorescence probes for this purpose is highly desired because they provide a much more convenient and highly sensitive technique for the detection of this material. OFF-ON-type fluorescent probes have been developed for the detection of non-fluorescent compounds. Photo-induced electron transfer and fluorescence resonance energy transfer are the two main fluorescence quenching mechanisms for the detection of ascorbic acid, and several fluorescence probes have been reported based on redox-responsive metals and quantum dots. Profluorescent nitroxide compounds have also been developed as non-metal organic fluorescence probes for ascorbic acid. These nitroxide systems have a stable unpaired electron and can therefore react with ascorbic acid and a strong fluorescence quencher. Furthermore, recent synthetic advances have allowed for the synthesis of α-substituted nitroxides with varying levels of reactivity towards ascorbic acid. In this review, we have discussed the design strategies used for the preparation of fluorescent probes for ascorbic acid, with particular emphasis on profluorescent nitroxides, which are unique radical-based redox-active fluorescent probes.

A profluorescent nitroxide probe for ascorbic acid detection and its application to quantitative analysis of diabetic rat plasma

15-((9-(Ethylimino)-10-methyl-9Hbenzo[a]phenoxazin-5-yl)amino)-3,11-dioxa-7-azadispiro[5.1.58.36]hexadecan-7-yloxyl, (Nile-DiPy) has been synthesized and examined as an off–on profluorescent nitroxide probe for measuring ascorbic acid in plasma.

Fluorescence probe for the convenient and sensitive detection of ascorbic acid

Ascorbic acid is an important antioxidant that plays an essential role in the biosynthesis of numerous bioactive substances. The detection of ascorbic acid has traditionally been achieved using high-performance liquid chromatography and absorption spectrophotometry assays. However, the development of fluorescence probes for this purpose is highly desired because they provide a much more convenient and highly sensitive technique for the detection of this material. OFF-ON-type fluorescent probes have been developed for the detection of non-fluorescent compounds. Photo-induced electron transfer and fluorescence resonance energy transfer are the two main fluorescence quenching mechanisms for the detection of ascorbic acid, and several fluorescence probes have been reported based on redox-responsive metals and quantum dots. Profluorescent nitroxide compounds have also been developed as non-metal organic fluorescence probes for ascorbic acid. These nitroxide systems have a stable unpaired electron and can therefore react with ascorbic acid and a strong fluorescence quencher. Furthermore, recent synthetic advances have allowed for the synthesis of α-substituted nitroxides with varying levels of reactivity towards ascorbic acid. In this review, we have discussed the design strategies used for the preparation of fluorescent probes for ascorbic acid, with particular emphasis on profluorescent nitroxides, which are unique radical-based redox-active fluorescent probes.

pH induced reversible assembly of DNA wrapped carbon nanotubes

Background

Reversible assembly and disassembly of nanostructures has important function in controllable construction of nanodevices. There are several methods to achieve reversible assembly/disassembly, such as pH, temperature, DNA hybridization and so on. Among these methods, pH driven reversible assembly presents superiority due to its ease-of-use and no waste produced. Herein we report a novel design that use two single-stranded (ss) DNAs wrapped single walled carbon nanotubes (SWCNTs) for the pH controlled assembly of SWCNTs without generation of waste.

Results

Both of the two DNAs with a same wrapping sequence of d(GT)20 and different free terminals showed a very high tendency to wrap around carbon nanotubes. The assembly was driven by the hybridization between the two free terminals of wrapped DNAs on the neighboring SWCNTs: i-motif (four-stranded C-quadruplex) and its complemental stranded G-quadruplex which would form tight tetraplexes and break the hybridization under slightly acidic conditions. Thus the assembly and disassembly are reversibly controlled by pH. And this assembly/disassembly process can be easily distinguished by naked eyes. Gel electrophoresis and Atomic Force Microscope are used to demonstrate the assembly and disassembly of SWCNTs at different pH.

Conclusions

A novel pH induced reversible assembly and disassembly of SWCNTs was realized which may have potential applications in the area of controlled assembly of nanostructures.