Electrochemical sensor based on Ti3C2 membrane doped with UIO-66-NH2 for dopamine

A Ti₃C₂ membrane was prepared by doping UIO-66-NH₂ with Ti₃C₂ through hydrogen bonds. When the doping mass ratio of Ti₃C₂ and UIO-66-NH₂ was 6:1, the electrochemical performance was optimal. Characterization was done by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and electrochemical impedance spectroscopy (EIS) which exhibited hierarchical cave-like physiognomy, large specific area, outstanding electronic conductive network, and excellent film-forming property. Moreover, the Ti₃C₂ film was analyzed via atomic force microscopy (AFM), which displayed good mechanical properties and rough surface morphology. The fabricated Ti₃C₂ membrane/GCE sensor was applied to the detection of dopamine (working potential of + 0.264 V vs. Ag/AgCl) with LOD of 0.81 fM and a sensitivity of 14.72 µA fM⁻¹ cm⁻². It was demonstrated that the Ti₃C₂ membrane can be used to construct nonenzymatic sensors with excellent performance. The fabricated sensor has high selectivity and stability and has good practicability with recoveries of 101.2–103.5% and a relative standard deviation (RSD) of 1.2–2.4%.

Conjugated Polymers for Assessing and Controlling Biological Functions

The field of organic bioelectronics is advancing rapidly in the development of materials and devices to precisely monitor and control biological signals. Electronics and biology can interact on multiple levels: organs, complex tissues, cells, cell membranes, proteins, and even small molecules. Compared to traditional electronic materials such as metals and inorganic semiconductors, conjugated polymers (CPs) have several key advantages for biological interactions: tunable physiochemical properties, adjustable form factors, and mixed conductivity (ionic and electronic). Herein, the use of CPs in five biologically oriented research topics, electrophysiology, tissue engineering, drug release, biosensing, and molecular bioelectronics, is discussed. In electrophysiology, implantable devices with CP coating or CP-only electrodes are showing improvements in signal performance and tissue interfaces. CP-based scaffolds supply highly favorable static or even dynamic interfaces for tissue engineering. CPs also enable delivery of drugs through a variety of mechanisms and form factors. For biosensing, CPs offer new possibilities to incorporate biological sensing elements in a conducting matrix. Molecular bioelectronics is today used to incorporate (opto)electronic functions in living tissue. Under each topic, the limits of the utility of CPs are discussed and, overall, the major challenges toward implementation of CPs and their devices to real-world applications are highlighted.

Promising methods for noninvasive medical diagnosis based on the use of nanoparticles: surface-enhanced raman spectroscopy in the study of cells, cell organelles and neurotransmitter metabolism markers

Application of advances in nanomedicine and materials science to medical diagnostics is a promising area of research. Surface-enhanced Raman spectroscopy (SERS) is an innovative analytical method that exploits noble metal nanoparticles to noninvasively study cells, cell organelles and protein molecules. Below, we summarize the literature on the methods for early clinical diagnosis of some neurodegenerative and neuroendocrine diseases. We discuss the specifics, advantages and limitations of different diagnostic techniques based on the use of low- and high molecular weight biomarkers. We talk about the prospects of optical methods for rapid diagnosis of neurotransmitter metabolism disorders. Special attention is paid to new approaches to devising optical systems that expand the analytical potential of SERS, the tool that demonstrates remarkable sensitivity, selectivity and reproducibility of the results in determining target analytes in complex biological matrices.

All-inorganic perovskite quantum dot/TiO2 inverse opal electrode platform: stable and efficient photoelectrochemical sensing of dopamine under visible irradiation

CsPbX3 (X = Cl, Br or I) perovskite quantum dots (PQDs) have attracted tremendous attention due to their extraordinarily excellent optical properties. However, there is still an obstacle for their bio-application, which is limited by their water-instability. In this work, we have designed a novel visible light triggered photoelectrochemical (PEC) sensor for dopamine (DA) based on CsPbBr1.5I1.5 PQD immobilized three-dimensional (3D) TiO2 inverse opal photonic crystals (IOPCs). Supported by the TiO2 IOPCs, the water-stability of the PQDs as well as that of the PEC sensor was considerably improved. Furthermore, employed as a photoactive material in PEC sensor, CsPbBr1.5I1.5 PQDs can expand the photocurrent response of the PEC sensor to the whole visible region. In addition, the modulation of the photonic stop band effect of TiO2 IOPCs on the incident light and the emission of PQDs could further enhance the photocurrent response. Such a PEC sensor demonstrates sensitive detection of DA in phosphate buffer saline solution and serum, with a good linear range from 0.1 μM to 250 μM and a low detection limit of approximately 0.012 μM. Our strategy opens an alternative horizon for PQD based PEC sensing, which could be more sensitive, convenient and inexpensive for clinical and biological analysis.

A fluorescent sensor based on thioglycolic acid capped cadmium sulfide quantum dots for the determination of dopamine

A fluorescent sensor based on thioglycolic acid-capped cadmium sulfide quantum dots (TGA-CdS QDs) has been designed for the sensitive and selective detection of dopamine (DA). In the presence of dopamine (DA), the addition of 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) and N-hydroxysuccinimide (NHS) activates the reaction between the carboxylic group of the TGA and the amino group of dopamine to form an amide bond, quenching the fluorescence of the QDs. The fluorescence intensity of TGA-CdS QDs can be used to sense the presence of dopamine with a limit of detection of 0.68μM and a working linear range of 1.0-17.5μM. This sensor system shows great potential application for dopamine detection in dopamine drug samples and for future easy-to-make analytical devices.

Multiwalled carbon nanotube supported Schiff base copper complex inorganic nanocomposite for enhanced electrochemical detection of dopamine

A MWCNT/[Cu(sal-ala)bpy] inorganic nanocomposite for the electrochemical detection of dopamine (DA).

A new approach for turn-on fluorescence sensing of l-DOPA

Resa-Sulf, designed based on a redox reaction, was applied for turn-on fluorescence sensing and quantitative detection ofl-DOPA.

Dual Reaction-Based Multimodal Assay for Dopamine with High Sensitivity and Selectivity Using Functionalized Gold Nanoparticles

A simple and dual chemical reaction-based multimodal assay for dopamine with high sensitivity and selectivity using two types of functionalized gold nanoparticles (FB-AuNPs/NsNHS-AuNPs), i.e. fluorescein modified gold nanoparticles (FB-AuNPs) and Nile blue modified gold nanoparticles (NsNHS-AuNPs), was successfully fabricated. This assay for dopamine presents colorimetric visualization and double channel fluorescence enhancement at 515 and 665 nm. The absorbance and fluorescence changes were linearly proportional to the amounts of dopamine in the range of nanomolar scale (5-100 nM). The detection limits for absorbance and fluorescence were as low as 1.2 nM and 2.9 nM (S/N = 3), respectively. Furthermore, the extent application of this multimodal assay has been successfully demonstrated in human urine samples with high reliability and applicability, showing remarkable promise in diagnostic purposes.

Synthesis of a multifunctional poly(p-phenylene ethynylene) scaffold with clickable azide-containing side chains for (bio)sensor applications

Clickable poly(p-phenylene ethynylene) (PPE) copolymers were designed and synthesized towards (bio)sensor applications.

Poly(aryleneethynylene)s (PAE) as paradigmatic sensor cores

What you need to know about poly(aryleneethynylene)s as sensory materials. A tutorial of fundamental properties and new developments since 2009.

Tyrosine-functionalized CuInS2 quantum dots as a fluorescence probe for the determination of biothiols, histidine and threonine

A novel, rapid and highly sensitive fluorescence turn-on assay for the detection of biothiols (glutathione, and L-cysteine), histidine and threonine was developed. Water-soluble CuInS2 ternary quantum dots (QDs) capped by mercaptopropionic acid (MPA) were directly synthesized in aqueous solution, and then functionalized using tyrosine molecules to form tyrosine-functionalized CuInS2 QDs (T-CuInS2 QDs). The fluorescence of T-CuInS2 QDs would decrease in the presence of Cu(2+) due to the coordination effect of phenolic hydroxyls of the tyrosine molecules. Subsequently, the addition of biothiols (glutathione and L-cysteine), histidine or threonine could turn on the fluorescence of the T-CuInS2 QDs-Cu(2+) system due to their strong affinity for Cu(2+). The proposed method was simple in design and fast in operation, and it was applied for the detection of glutathione, L-cysteine, histidine, and threonine in human serum samples with satisfactory results.

Sol-gel thin-film based mesoporous silica and carbon nanotubes for the determination of dopamine, uric acid and paracetamol in urine

This work describes the preparation, characterization and application of a hybrid material composed of disordered mesoporous silica (SiO2) modified with multiwalled carbon nanotubes (MWCNTs), obtained by the sol-gel process using HF as the catalyst. This hybrid material was characterized by N2 adsorption-desorption isotherms, X-ray powder diffraction (XRD), scanning electron microscopy (SEM), high resolution transmission microscopy (HR-TEM), Raman spectroscopy and X-ray photoelectron spectroscopy (XPS). This new hybrid material was used for the construction of a thin film on a glassy carbon electrode. The modified electrode using this material was designated SiO2/MWCNT/GCE. The electrocatalytic properties of the electrode toward dopamine, uric acid and paracetamol oxidation were studied by differential pulse voltammetry. Well-defined and separated oxidation peaks were observed in phosphate buffer solution at pH 7.0, in contrast with the ill-defined peaks observed with unmodified glassy carbon electrodes. The electrode had high sensitivity for the determination of dopamine, uric acid and paracetamol, with the limits of detection obtained using statistical methods, at 0.014, 0.068 and 0.098 µmol L(-1), respectively. The electrode presented some important advantages, including enhanced physical rigidity, surface renewability by polishing and high sensitivity, allowing the simultaneous determination of these three analytes in a human urine sample.

3-Aminophenyl boronic acid-functionalized CuInS2 quantum dots as a near-infrared fluorescence probe for the determination of dopamine

Water-soluble CuInS2 ternary quantum dots (QDs) capped by mercaptopropionic acid were directly synthesized in aqueous solution. Consequently, the CuInS2 QDs were covalently linked to 3-aminophenyl boronic acid molecules to form the 3-aminophenyl boronic acid-functionalized CuInS2 QDs (F-CuInS2 QDs). The F-CuInS2 QDs had a fairly symmetric fluorescence emission centered at 736nm that was in the near-infrared region (NIR). The F-CuInS2 QDs containing boronic acid functional groups were reactive toward vicinal diols to form five- or six-member cyclic esters in an alkaline aqueous solution. The reaction would cause the fluorescence quenching, which could be used as a fluorescence probe for the determination of dopamine (DA). This assay could also probe other vicinal diols such as catechol, pyrogallol, and gallate, based on the fluorescence quenching of the F-CuInS2 QDs, and this assay was nearly unaffected by other phenol compounds such as phenol, resorcinol, and hydroquinone without the vicinal diol structures. The developed F-CuInS2 QDs were applied to the detection of DA in human serum samples with satisfactory results. Therefore, this experment provided a simple and sensitve NIR fluorescence probe for the detection of DA, catechol, pyrogallol, and gallate.

Sodium dodecyl sulfate-modified electrochemical paper-based analytical device for determination of dopamine levels in biological samples

We report the development of an electrochemical paper-based analytical device (ePAD) for the selective determination of dopamine (DA) in model serum sample. The ePAD device consists of three layers. In the top layer, SU-8 photoresist defines a hydrophilic sample application spot on the filter paper. The middle layer was made from transparency film and contained two holes, one for sample preconcentration and the other for the surfactant to allow transfer to the third layer. A screen-printed carbon electrode formed the bottom layer and was used for electrochemical measurements. In the absence of the anionic surfactant, sodium dodecyl sulfate (SDS), the oxidation peaks of DA, ascorbic acid (AA) and uric acid (UA) overlapped. With the addition of SDS, the DA oxidation peak shifted to more negative values and was clearly distinguishable from AA and UA. The oxidation potential shift was presumably due to preferential electrostatic interactions between the cationic DA and the anionic SDS. Indeed, whilst the SDS-modified paper improved the DA current five-fold, the non-ionic Tween-20 and cationic tetradecyltrimethylammonium bromide surfactants had no effect or reduced the current, respectively. Furthermore, only the SDS-modified paper showed the selective shift in oxidation potential for DA. DA determination was carried out using square-wave voltammetry between -0.2 and 0.8 V vs. Ag/AgCl, and this ePAD was able to detect DA over a linear range of 1-100 μM with a detection limit (S/N=3) of 0.37 μM. The ePAD seems suitable as a low cost, easy-to-use, portable device for the selective quantitation of DA in human serum samples.

Efficient one-pot synthesis of molecularly imprinted silica nanospheres embedded carbon dots for fluorescent dopamine optosensing

A new type of eco-friendly molecularly imprinted polymer (MIP) was synthesized through an efficient one-pot room-temperature sol-gel polymerization and applied as a molecular recognition element to construct dopamine (DA) fluorescence (FL) optosensor. Highly luminescent carbon dots (CDs) were firstly synthesized via a one-step reaction in organosilane, and their surface were anchored with MIP matrix (CDs@MIP). The resulting composite of a synergetic combination of CDs with MIP showed high photostability and template selectivity. Moreover, the composite allowed a highly sensitive determination of DA via FL intensity decreasing when removal of the original templates. The new MIP-based DA sensing protocol was applied to detect DA concentration in aqueous solution, the relative FL intensity of CDs@MIP decreased linearly with the increasing DA in the concentration range of 25-500nM with a detection limit (3σ) of 1.7 nM. Furthermore, the proposed method was successfully intended for the determination of trace DA in human urine samples without the interference of other molecules and ions.