Enzymatic biofuel cells utilizing a biomimetic cofactor

Shifting redox reaction equilibria on demand using an orthogonal redox cofactor

Nature's two redox cofactors, nicotinamide adenine dinucleotide (NAD+) and nicotinamide adenine dinucleotide phosphate (NADP+), are held at different reduction potentials, driving catabolism and anabolism in opposite directions. In biomanufacturing, there is a need to flexibly control redox reaction direction decoupled from catabolism and anabolism. We established nicotinamide mononucleotide (NMN+) as a noncanonical cofactor orthogonal to NAD(P)+. Here we present the development of Nox Ortho, a reduced NMN+ (NMNH)-specific oxidase, that completes the toolkit to modulate NMNH:NMN+ ratio together with an NMN+-specific glucose dehydrogenase (GDH Ortho). The design principle discovered from Nox Ortho engineering and modeling is facilely translated onto six different enzymes to create NMN(H)-orthogonal biocatalysts with a consistent ~103-106-fold cofactor specificity switch from NAD(P)+ to NMN+. We assemble these enzymes to produce stereo-pure 2,3-butanediol in cell-free systems and in Escherichia coli, enabled by NMN(H)'s distinct redox ratio firmly set by its designated driving forces, decoupled from both NAD(H) and NADP(H).

Stoichiometric Regeneration of Biomimetic Nicotinamide Coenzyme Powered by Biomass Sugars via In Vitro Synthetic Enzymatic Biosystems

Biomimetic nicotinamide coenzymes, including nicotinamide mononucleotide (NMN+), have been demonstrated as promising low-cost alternatives to nicotinamide adenine dinucleotide (phosphate) (NAD(P)+) in biocatalysis. Herein, to efficiently regenerate NMNH from NMN+ in vitro powered by biomass sugars, a thermophilic NADP+-dependent glucose 6-phosphate dehydrogenase from Thermotoga maritima (TmG6PDH) was engineered to increase the activity toward NMN+. The catalytic efficiency (kcat/Km) of optimal mutant (TmG6PDH-R7) toward NMN+ increased by 71.7-fold than TmG6PDH-WT. As a result, compared to the wild type, the coenzyme specificity ([kcat/Km]NMN +/[kcat/Km]NADP +) of TmG6PDH-R7 increased by ~2.0×105-fold. The structural analysis revealed that the introduced hydrophobic and bulky residues lead to the formation of a smaller binding pocket, which resulting in a higher affinity for NMN+ with small size than NADP+. Then several in vitro synthetic enzymatic biosystems (ivSEBs) comprising this thermophilic TmG6PDH-R7 and a previously engineered thermophilic 6-phosphogluconate dehydrogenase were constructed. These ivSEBs harnessed the complete oxidation of renewable biomass sugars to facilitate the stoichiometric regeneration of 12 molecules of NMNH from 1 molecule of glucose, thereafter producing various products such as levodione, 2,3-butanediol or bioelectricity, over a wide temperature range. This study could pave the way for using stable and low-cost biomimetic coenzymes in ivSEBs for industrial biomanufacturing.

Synthetic Nicotinamide Cofactors as Alternatives to NADPH in Imine Reductase-Catalyzed Reactions

This study demonstrates the effectiveness of synthetic nicotinamide cofactors as cost-effective alternatives to NADPH in imine reductase (IRED) catalysis. The synthetic cofactors maintained catalytic activity and stereoselectivity, achieving high conversion rates. Molecular docking studies revealed key structural interactions influencing performance. Combining a glucose dehydrogenase (GDH) recycling system further enhanced the stability and efficiency. These findings highlight the potential of synthetic cofactors to reduce costs and improve the feasibility of IRED-catalyzed processes for industrial applications.

Synthesis of C-N bonds by nicotinamide-dependent oxidoreductase: an overview

Compounds containing chiral C-N bonds play a vital role in the composition of biologically active natural products and small pharmaceutical molecules. Therefore, the development of efficient and convenient methods for synthesizing compounds containing chiral C-N bonds is a crucial area of research. Nicotinamide-dependent oxidoreductases (NDOs) emerge as promising biocatalysts for asymmetric synthesis of chiral C-N bonds due to their mild reaction conditions, exceptional stereoselectivity, high atom economy, and environmentally friendly nature. This review aims to present the structural characteristics and catalytic mechanisms of various NDOs, including imine reductases/ketimine reductases, reductive aminases, EneIRED, and amino acid dehydrogenases. Additionally, the review highlights protein engineering strategies employed to modify the stereoselectivity, substrate specificity, and cofactor preference of NDOs. Furthermore, the applications of NDOs in synthesizing essential medicinal chemicals, such as noncanonical amino acids and chiral amine compounds, are extensively examined. Finally, the review outlines future perspectives by addressing challenges and discussing the potential of utilizing NDOs to establish efficient biosynthesis platforms for C-N bond synthesis. In conclusion, NDOs provide an economical, efficient, and environmentally friendly toolbox for asymmetric synthesis of C-N bonds, thus contributing significantly to the field of pharmaceutical chemical development.

Design, construction, and application of noncanonical redox cofactor infrastructures

Controlling the flow of carbon and reducing power in biological systems is a central theme in metabolic engineering. Often, trade-offs in pushing carbon flux through targeted pathways while operating in conditions agreeable to the host are required due to the central pools of the shared native redox cofactors NAD(P)/H. Noncanonical redox cofactors (NRCs) have emerged as promising tools to transform how engineers develop biotransformation systems. These new-to-Nature redox cofactors have been demonstrated to function orthogonally to the endogenous cofactors, support pathway thermodynamics optimization, and achieve product scopes previously difficult to reach due to endogenous pathway crosstalk. This review will discuss the development of NRC infrastructures, comprising NRC pools, cofactor reduction sources, and cofactor oxidation sinks, the (pool-source-sink) infrastructure.

Shifting Redox Reaction Equilibria on Demand Using an Orthogonal Redox Cofactor

Natural metabolism relies on chemical compartmentalization of two redox cofactors, NAD+ and NADP+, to orchestrate life-essential redox reaction directions. However, in whole cells the reliance on these canonical cofactors limits flexible control of redox reaction direction as these reactions are permanently tied to catabolism or anabolism. In cell-free systems, NADP+ is too expensive in large scale. We have previously reported the use of nicotinamide mononucleotide, (NMN+) as a low-cost, noncanonical redox cofactor capable of specific electron delivery to diverse chemistries. Here, we present Nox Ortho, an NMNH-specific water-forming oxidase, that completes the toolkit to modulate NMNH/NMN+ ratio. This work uncovers an enzyme design principle that succeeds in parallel engineering of six butanediol dehydrogenases as NMN(H)-orthogonal biocatalysts consistently with a 103 - 106 -fold cofactor specificity switch from NAD(P)+ to NMN+. We combine these to produce chiral-pure 2,3-butanediol (Bdo) isomers without interference from NAD(H) or NADP(H) in vitro and in E. coli cells. We establish that NMN(H) can be held at a distinct redox ratio on demand, decoupled from both NAD(H) and NADP(H) redox ratios in vitro and in vivo.

Bioelectrochemical systems (BESs) for agro-food waste and wastewater treatment, and sustainable bioenergy-A review

Producing food by farming and subsequent food manufacturing are central to the world's food supply, accounting for more than half of all production. Production is, however, closely related to the creation of large amounts of organic wastes or byproducts (agro-food waste or wastewater) that negatively impact the environment and the climate. Global climate change mitigation is an urgent need that necessitates sustainable development. For that purpose, proper agro-food waste and wastewater management are essential, not only for waste reduction but also for resource optimization. To achieve sustainability in food production, biotechnology is considered as key factor since its continuous development and broad implementation will potentially benefit ecosystems by turning polluting waste into biodegradable materials; this will become more feasible and common as environmentally friendly industrial processes improve. Bioelectrochemical systems are a revitalized, promising biotechnology integrating microorganisms (or enzymes) with multifaceted applications. The technology can efficiently reduce waste and wastewater while recovering energy and chemicals, taking advantage of their biological elements' specific redox processes. In this review, a consolidated description of agro-food waste and wastewater and its remediation possibilities, using different bioelectrochemical-based systems is presented and discussed together with a critical view of the current and future potential applications.

Engineering Candida boidinii formate dehydrogenase for activity with the non-canonical cofactor 3'-NADP(H)

Oxidoreductases catalyze essential redox reactions, and many require a diffusible cofactor for electron transport, such as NAD(H). Non-canonical cofactor analogs have been explored as a means to create enzymatic reactions that operate orthogonally to existing metabolism. Here, we aimed to engineer the formate dehydrogenase from Candid boidinii (CbFDH) for activity with the non-canonical cofactor nicotinamide adenine dinucleotide 3'-phosphate (3'-NADP(H)). We used PyRosetta, the Cofactor Specificity Reversal Structural Analysis and Library Design (CSR-SALAD), and structure-guided saturation mutagenesis to identify mutations that enable CbFDH to use 3'-NADP+. Two single mutants, D195A and D195G, had the highest activities with 3'-NADP+, while the double mutant D195G/Y196S exhibited the highest cofactor selectivity reversal behavior. Steady state kinetic analyses were performed; the D195A mutant exhibited the highest KTS value with 3'-NADP+. This work compares the utility of computational approaches for cofactor specificity engineering while demonstrating the engineering of an important enzyme for novel non-canonical cofactor selectivity.

Redox Biocatalysis: Quantitative Comparisons of Nicotinamide Cofactor Regeneration Methods

Enzymatic processes, particularly those capable of performing redox reactions, have recently been of growing research interest. Substrate specificity, optimal activity at mild temperatures, high selectivity, and yield are among the desirable characteristics of these oxidoreductase catalyzed reactions. Nicotinamide adenine dinucleotide (phosphate) or NAD(P)H-dependent oxidoreductases have been extensively studied for their potential applications like biosynthesis of chiral organic compounds, construction of biosensors, and pollutant degradation. One of the main challenges associated with making these processes commercially viable is the regeneration of the expensive cofactors required by the enzymes. Numerous efforts have pursued enzymatic regeneration of NAD(P)H by coupling a substrate reduction with a complementary enzyme catalyzed oxidation of a co-substrate. While offering excellent selectivity and high total turnover numbers, such processes involve complicated downstream product separation of a primary product from the coproducts and impurities. Alternative methods comprising chemical, electrochemical, and photochemical regeneration have been developed with the goal of enhanced efficiency and operational simplicity compared to enzymatic regeneration. Despite the goal, however, the literature rarely offers a meaningful comparison of the total turnover numbers for various regeneration methodologies. This comprehensive Review systematically discusses various methods of NAD(P)H cofactor regeneration and quantitatively compares performance across the numerous methods. Further, fundamental barriers to enhanced cofactor regeneration in the various methods are identified, and future opportunities are highlighted for improving the efficiency and sustainability of commercially viable oxidoreductase processes for practical implementation.

Cofactor and Process Engineering for Nicotinamide Recycling and Retention in Intensified Biocatalysis

There is currently considerable interest in the intensification of biocatalytic processes to reduce the cost of goods for biocatalytically produced chemicals, including pharmaceuticals and advanced pharmaceutical intermediates. Continuous-flow biocatalysis shows considerable promise as a method for process intensification; however, the reliance of some reactions on the use of diffusible cofactors (such as the nicotinamide cofactors) has proven to be a technical barrier for key enzyme classes. This minireview covers attempts to overcome this limitation, including the cofactor recapture and recycling retention of chemically modified cofactors. For the latter, we also consider the state of science for cofactor modification, a field reinvigorated by the current interest in continuous-flow biocatalysis.

Rational Engineering of 3α-Hydroxysteroid Dehydrogenase/Carbonyl Reductase for a Biomimetic Nicotinamide Mononucleotide Cofactor

Enzymes are powerful biological catalysts for natural substrates but they have low catalytic efficiency for non-natural substrates. Protein engineering can be used to optimize enzymes for catalysis and stability. 3α-Hydroxysteroid dehydrogenase/carbonyl reductase (3α-HSD/CR) catalyzes the oxidoreduction reaction of NAD+ with androsterone. Based on the structure and catalytic mechanism, we mutated the residues of T11, I13, D41, A70, and I112 and they interacted with different portions of NAD+ to switch cofactor specificity to biomimetic cofactor nicotinamide mononucleotide (NMN+). Compared to wild-type 3α-HSD/CR, the catalytic efficiency of these mutants for NAD+ decreased significantly except for the T11 mutants but changed slightly for NMN+ except for the A70K mutant. The A70K mutant increased the catalytic efficiency for NMN+ by 8.7-fold, concomitant with a significant decrease in NAD+ by 1.4 × 104-fold, resulting in 9.6 × 104-fold cofactor specificity switch toward NMN+ over NAD+. Meanwhile, the I112K variant increased the thermal stability and changed to a three-state transition from a two-state transition of thermal unfolding of wild-type 3α-HSD/CR by differential scanning fluorimetry. Molecular docking analysis indicated that mutations on these residues affect the position and conformation of the docked NAD+ and NMN+, thereby affecting their activity. A70K variant sterically blocks the binding with NAD+, restores the H-bonding interactions of catalytic residues of Y155 and K159 with NMN+, and enhances the catalytic efficiency for NMN+.

Engineering Embden-Meyerhof-Parnas Glycolysis to Generate Noncanonical Reducing Power

Noncanonical cofactors such as nicotinamide mononucleotide (NMN+) supplant the electron-transfer functionality of the natural cofactors, NAD(P)+, at a lower cost in cell-free biomanufacturing and enable orthogonal electron delivery in whole-cell metabolic engineering. Here, we redesign the high-flux Embden-Meyerhof-Parnas (EMP) glycolytic pathway to generate NMN+-based reducing power, by engineering Streptococcus mutans glyceraldehyde-3-phosphate dehydrogenase (Sm GapN) to utilize NMN+. Through iterative rounds of rational design, we discover the variant GapN Penta (P179K-F153S-S330R-I234E-G210Q) with high NMN+-dependent activity and GapN Ortho (P179K-F153S-S330R-I234E-G214E) with ~3.4 × 106-fold switch in cofactor specificity from its native cofactor NADP+ to NMN+. GapN Ortho is further demonstrated to function in Escherichia coli only in the presence of NMN+, enabling orthogonal control of glucose utilization. Molecular dynamics simulation and residue network connectivity analysis indicate that mutations altering cofactor specificity must be coordinated to maintain the appropriate degree of backbone flexibility to position the catalytic cysteine. These results provide a strategy to guide future designs of NMN+-dependent enzymes and establish the initial steps toward an orthogonal EMP pathway with biomanufacturing potential.

In situ modulation of enzyme activity via heterogeneous catalysis utilizing solid electroplated cofactors

During product isolation the received bioreceptors often do not exhibit a sufficient biochemical activity due to multistep dissociation and loss of cofactors. However, for bioelectrochemical applications the presence of cofactors is necessary for a successful oxidative or reductive conversion of the substrates to the products. Herein, we show how the immobilization of the required electroplated cofactors in a design of amperometric electrodes can in situ assist the activity of apo-enzymes. Compared to conventional approaches used in enzyme engineering this tailored nanoengineering methodology is superior from economic point of view, labor and time costs, storage conditions, reduced amount of waste and can fill the gap in the development of tuned bioelectrocatalysts.

Biosensors Based on Bio-Functionalized Semiconducting Metal Oxides

Immobilization of biomaterials is a very important task in the development of biofuel cells and biosensors. Some semiconducting metal-oxide-based supporting materials can be used in these bioelectronics-based devices. In this article, we are reviewing some functionalization methods that are applied for the immobilization of biomaterials. The most significant attention is paid to the immobilization of biomolecules on the surface of semiconducting metal oxides. The improvement of biomaterials immobilization on metal oxides and analytical performance of biosensors by coatings based on conducting polymers, self-assembled monolayers and lipid membranes is discussed.

Powering smart contact lenses for continuous health monitoring: Recent advancements and future challenges

As the tear is noninvasively and continuously available, it has been turned into a convenient biological interface as a wearable medical device for out-of-hospital and self-monitoring applications. Recent progress in integrated circuits (ICs) and biosensors coupled with wireless data communication techniques have led to the implementation of smart contact lenses that can continuously sample tear fluid, analyze physiological conditions, and wirelessly transmit data to an electronic device such as smartphone, which can send data to relevant healthcare units. Continuous analyte monitoring is one of the significant characteristics of wearable biosensors. However, despite several advantages over other on-skin wearable medical devices, batteries cannot be incorporated on smart contact lenses for continuous electrical power supply due to the limited area. Herein, we review the progress of power delivery techniques of smart contact lenses for the first time. Different approaches, including wireless power transmission (WPT), biofuel cells, supercapacitors, flexible batteries, wired connections, and hybrid methods, are thoroughly discussed to understand the principles of self-sustainable contact lens biosensors comprehensively. Additionally, recent progress in contact lens biosensors is reviewed in detail, thereby providing the prospects for further developments of smart contact lenses as a common biosensing platform for various disease monitoring and diagnostic applications.

Cell-Free Noncanonical Redox Cofactor Systems

Noncanonical redox cofactor systems utilize nicotinamide adenine dinucleotide (phosphate), NAD(P)H, mimics to perform biotransformation reactions. Compared to systems utilizing native NAD(P)H, these noncanonical redox cofactors can offer decreased cost of cofactor supply, improved system activities, and can even supply reducing power directly to targeted reactions in complex biological environments. When these systems are operated in cell-free settings, the high level of user control afforded by direct access to the reaction system enables specific tuning of cofactor parameters, enzyme activity, and reaction progression to maximize system productivity. In this chapter, we will describe methods for constructing these cell-free noncanonical redox cofactor systems. Specifically, methods, design concepts, and system adaptation will be discussed for applying noncanonical redox cofactors to both purified protein-based and crude lysate-based biotransformation systems.

A review: Evolution of enzymatic biofuel cells

Ever-growing demands for energy, the unsustainability of fossil fuel due to its scarcity and massive impact on global economies and the environment, have encouraged the research on alternative power sources to work upon for the governments, companies, and scientists across the world. Enzymatic biofuel cells (eBFCs) is one category of fuel cell that can harvest energy from biological moieties and has the future to be used as an alternative source of energy. The aim of this review is to summarize the background and state-of-the-art in the field of eBFCs. This review article will be very beneficial for a wide audience including students and new researchers in the field. A part of the paper summarized the challenges in the preparation of anode and cathode and the involvement of nanomaterials and conducting polymers to construct the effective bioelectrodes. It will provide an insight for the researchers working in this challenging field. Furthermore, various applications of eBFCs in implantable power devices, tiny electronic gadgets, and self powered biosensors are reported. This review article explains the development in the area of eBFCs for several years from its origin to growth systematically. It reveals the strategies that have been taken for the improvements required for the better electrochemical performance and operational stability of eBFCs. It also mentions the challenges in this field that will require proper attention so that the eBFCs can be utilized commercially in the future. The review article is written and structurized in a way so that it can provide a decent background of eBFCs to its reader. It will definitely help in enhancing the interest of reader in eBFCs.

Design of novel enzyme biocatalysts for industrial bioprocess: Harnessing the power of protein engineering, high throughput screening and synthetic biology

Biocatalysts have wider applications in various industries. Biocatalysts are generating bigger attention among researchers due to their unique catalytic properties like activity, specificity and stability. However the industrial use of many enzymes is hindered by low catalytic efficiency and stability during industrial processes. Properties of enzymes can be altered by protein engineering. Protein engineers are increasingly study the structure-function characteristics, engineering attributes, design of computational tools for enzyme engineering, and functional screening processes to improve the design and applications of enzymes. The potent and innovative techniques of enzyme engineering deliver outstanding opportunities for tailoring industrially important enzymes for the versatile production of biochemicals. An overview of the current trends in enzyme engineering is explored with important representative examples.

Charge Transfer and Biocompatibility Aspects in Conducting Polymer-Based Enzymatic Biosensors and Biofuel Cells

Charge transfer (CT) is a very important issue in the design of biosensors and biofuel cells. Some nanomaterials can be applied to facilitate the CT in these bioelectronics-based devices. In this review, we overview some CT mechanisms and/or pathways that are the most frequently established between redox enzymes and electrodes. Facilitation of indirect CT by the application of some nanomaterials is frequently applied in electrochemical enzymatic biosensors and biofuel cells. More sophisticated and still rather rarely observed is direct charge transfer (DCT), which is often addressed as direct electron transfer (DET), therefore, DCT/DET is also targeted and discussed in this review. The application of conducting polymers (CPs) for the immobilization of enzymes and facilitation of charge transfer during the design of biosensors and biofuel cells are overviewed. Significant attention is paid to various ways of synthesis and application of conducting polymers such as polyaniline, polypyrrole, polythiophene poly(3,4-ethylenedioxythiophene). Some DCT/DET mechanisms in CP-based sensors and biosensors are discussed, taking into account that not only charge transfer via electrons, but also charge transfer via holes can play a crucial role in the design of bioelectronics-based devices. Biocompatibility aspects of CPs, which provides important advantages essential for implantable bioelectronics, are discussed.

Engineering natural and noncanonical nicotinamide cofactor-dependent enzymes: design principles and technology development

Nicotinamide cofactors enable oxidoreductases to catalyze a myriad of important reactions in biomanufacturing. Decades of research has focused on optimizing enzymes which utilize natural nicotinamide cofactors, namely nicotinamide adenine dinucleotide (phosphate) (NAD(P)+). Recent findings reignite the interest in engineering enzymes to utilize noncanonical cofactors, the mimetics of NAD+ (mNADs), which exhibit superior industrial properties in vitro and enable specific electron delivery in vivo. We compare recent advances in engineering natural versus noncanonical cofactor-utilizing enzymes, discuss design principles discovered, and survey emerging high-throughput platforms beyond the traditional 96-well plate-based methods. Obtaining mNAD-dependent enzymes remains challenging with a limited toolkit. To this end, we highlight design principles and technologies which can potentially be translated from engineering natural to noncanonical cofactor-dependent enzymes.

Platinum nanoparticle-deposited multi-walled carbon nanotubes as a NADH oxidase mimic: characterization and applications

The effective regeneration of bioactive NAD+ plays an important role in numerous dehydrogenase-dependent applications including biocatalysis and biosensing. However, this process usually suffers from high thermodynamic barrier, instability and high cost associated with natural enzymes. The emergence of nanomaterials with enzyme mimic characteristics has offered a potential alternative to many enzyme-catalyzed processes. Platinum nanoparticles (PtNPs), for example, have been extensively studied for their peroxidase- and oxidase-like activities. However, their behavior as a NADH oxidase mimic has barely been characterized in detail. Herein, we report a facile approach for preparing PtNP-deposited multi-walled carbon nanotubes (PtNPs@MWCNTs) as the nanozyme for NADH oxidation. Its enzymatic activity was investigated in depth, revealing that it is a NADH oxidase instead of a peroxidase and the catalytic process generates O2˙-, rather than OH˙ or 1O2, from dissolved O2. The recovery yield of bioactive NAD+ regeneration by the nanozyme could reach ∼100% with a total turnover number of ∼6000. Besides, it exhibited terrific electrochemical performance for NADH oxidation and sensing by greatly boosting the response and lowering the oxidation overpotential. It could also work on biomimetic cofactors with even higher activity. Finally, xylose dehydrogenase was immobilized with the nanozyme to constitute a hybrid bioelectrode for xylose sensing. The biosensor had a xylose detecting range of 5-400 μM with the limit of detection as low as 1 μM and can retain its performance after being reused several times. Our results suggest that the PtNPs@MWCNTs characterized as a NADH oxidase nanozyme hold great promise in the applications of biocatalysis and biosensing, which intensively deal with dehydrogenases and natural or biomimetic cofactors.

Aldehyde Production in Crude Lysate- and Whole Cell-Based Biotransformation Using a Noncanonical Redox Cofactor System

It is challenging to biosynthesize industrially important aldehydes, which are readily consumed by the numerous alcohol dehydrogenases (ADHs) in cells. In this work, we demonstrate that a nicotinamide mononucleotide (NMN⁺)-dependent redox cofactor cycling system enables aldehyde accumulation in Escherichia coli crude lysates and whole cells. By specifically delivering reducing power to a recombinant enoate reductase, but not to endogenous ADHs, we convert citral to citronellal with minimal byproduct formation (97-100% and 83% product purity in crude lysate- and whole cell-based biotransformation, respectively). We envision the system's universal application to lowering the noise in biomanufacturing by silencing the host's metabolic background.

Metabolic engineering of Escherichia coli for optimized biosynthesis of nicotinamide mononucleotide, a noncanonical redox cofactor

BACKGROUND

Noncanonical redox cofactors are emerging as important tools in cell-free biosynthesis to increase the economic viability, to enable exquisite control, and to expand the range of chemistries accessible. However, these noncanonical redox cofactors need to be biologically synthesized to achieve full integration with renewable biomanufacturing processes.

RESULTS

In this work, we engineered Escherichia coli cells to biosynthesize the noncanonical cofactor nicotinamide mononucleotide (NMN+), which has been efficiently used in cell-free biosynthesis. First, we developed a growth-based screening platform to identify effective NMN+ biosynthetic pathways in E. coli. Second, we explored various pathway combinations and host gene disruption to achieve an intracellular level of ~ 1.5 mM NMN+, a 130-fold increase over the cell's basal level, in the best strain, which features a previously uncharacterized nicotinamide phosphoribosyltransferase (NadV) from Ralstonia solanacearum. Last, we revealed mechanisms through which NMN+ accumulation impacts E. coli cell fitness, which sheds light on future work aiming to improve the production of this noncanonical redox cofactor.

CONCLUSION

These results further the understanding of effective production and integration of NMN+ into E. coli. This may enable the implementation of NMN+-directed biocatalysis without the need for exogenous cofactor supply.

Round, round we go - strategies for enzymatic cofactor regeneration

Covering: up to the beginning of 2020Enzymes depending on cofactors are essential in many biosynthetic pathways of natural products. They are often involved in key steps: catalytic conversions that are difficult to achieve purely with synthetic organic chemistry. Hence, cofactor-dependent enzymes have great potential for biocatalysis, on the condition that a corresponding cofactor regeneration system is available. For some cofactors, these regeneration systems require multiple steps; such complex enzyme cascades/multi-enzyme systems are (still) challenging for in vitro biocatalysis. Further, artificial cofactor analogues have been synthesised that are more stable, show an altered reaction range, or act as inhibitors. The development of bio-orthogonal systems that can be used for the production of modified natural products in vivo is an ongoing challenge. In light of the recent progress in this field, this review aims to provide an overview of general strategies involving enzyme cofactors, cofactor analogues, and regeneration systems; highlighting the current possibilities for application of enzymes using some of the most common cofactors.

Engineering a diaphorase via directed evolution for enzymatic biofuel cell application

Background

Diaphorase (DI) has received wide attention as the key anodic enzyme mediating the electron transfer and electric energy generation in enzymatic biofuel cells (EBFCs). Lowering the anodic pH may be a useful strategy for constructing high-performance in EBFCs. However, most DI suffered from the poor activity at low pHs. Therefore, it is necessary to modify the activity and its acidic tolerance to further improve the performance of the EBFC.

Results

This paper attempts to improve the enzyme activity of DI originated from Geobacillus stearothermophilus under acidic conditions through directed evolution. Three rounds of random mutagenesis by error-prone PCR of the GsDI gene followed by high-throughput screening allowed the identification of the mutant 3–8 (H37Q, S73T, F105L, S68T, G61S, D74V) exhibiting a 4- or 7-fold increase in the catalytic activity at pH 5.4 or 4.5 compared to that of the wild type. And the pH stability of mutant 3–8 was significantly better than that of wild type and showed a 1.3 times higher in the stability at pH 5.4. The EBFC anode equipped with 0.5 mg of mutant 3–8 achieved a maximum current of 40 μA at pH 5.4, much higher than that with the same loading of the wild type enzyme.

Conclusion

The GsDI has been improved in the specific activity and pH stability by directed evolution which leads to the improvement of the EBFC performance. Also, the enlarged catalytic channel of mutant and decreased B-factor may be beneficial for the activity and stability. These results suggest that this engineered DI will be a useful candidate for the construction of enhanced EBFCs.

Engineering a nicotinamide mononucleotide redox cofactor system for biocatalysis

Biological production of chemicals often requires the use of cellular cofactors, such as nicotinamide adenine dinucleotide phosphate (NADP+). These cofactors are expensive to use in vitro and difficult to control in vivo. We demonstrate the development of a noncanonical redox cofactor system based on nicotinamide mononucleotide (NMN+). The key enzyme in the system is a computationally designed glucose dehydrogenase with a 107-fold cofactor specificity switch toward NMN+ over NADP+ based on apparent enzymatic activity. We demonstrate that this system can be used to support diverse redox chemistries in vitro with high total turnover number (~39,000), to channel reducing power in Escherichia coli whole cells specifically from glucose to a pharmaceutical intermediate, levodione, and to sustain the high metabolic flux required for the central carbon metabolism to support growth. Overall, this work demonstrates efficient use of a noncanonical cofactor in biocatalysis and metabolic pathway design.

A High-Throughput Method for Directed Evolution of NAD(P)+-Dependent Dehydrogenases for the Reduction of Biomimetic Nicotinamide Analogues

Engineering flavin-free NAD(P)⁺-dependent dehydrogenases to reduce biomimetic nicotinamide analogues (mNAD⁺s) is of importance for eliminating the need for costly NAD(P)⁺ in coenzyme regeneration systems. Current redox dye-based screening methods for engineering the mNAD⁺ specificity of dehydrogenases are frequently encumbered by a background signal from endogenous NAD(P) and intracellular reducing compounds, making the detection of low mNAD⁺-based activities a limiting factor for directed evolution. Here, we develop a high-throughput screening method, NAD(P)-eliminated solid-phase assay (NESPA), which can reliably identify mNAD⁺-active mutants of dehydrogenases with a minimal background signal. This method involves (1) heat lysis of colonies to permeabilize the cell membrane, (2) colony transfer onto filter paper, (3) washing to remove endogenous NAD(P) and reducing compounds, (4) enzyme-coupled assay for mNADH-dependent color production, and (5) digital imaging of colonies to identify mNAD⁺-active mutants. This method was used to improve the activity of 6-phosphogluconate dehydrogenase on nicotinamide mononucleotide (NMN⁺). The best mutant obtained after six rounds of directed evolution exhibits a 50-fold enhancement in catalytic efficiency (k _cat/K _M) and a specific activity of 17.7 U/mg on NMN⁺, which is comparable to the wild-type enzyme on its natural coenzyme, NADP⁺. The engineered dehydrogenase was then used to construct an NMNH regeneration system to drive an ene-reductase catalysis. A comparable level of turnover frequency and product yield was observed using the engineered system relative to NADPH regeneration by using the wild-type dehydrogenase. NESPA provides a simple and accurate readout of mNAD⁺-based activities and the screening at high-throughput levels (approximately tens of thousands per round), thus opening up an avenue for the evolution of dehydrogenases with specific activities on mNAD⁺s similar to the levels of natural enzyme/coenzyme pairs.

Tackling the Challenges of Enzymatic (Bio)Fuel Cells

The ever-increasing demands for clean and sustainable energy sources combined with rapid advances in biointegrated portable or implantable electronic devices have stimulated intensive research activities in enzymatic (bio)fuel cells (EFCs). The use of renewable biocatalysts, the utilization of abundant green, safe, and high energy density fuels, together with the capability of working at modest and biocompatible conditions make EFCs promising as next generation alternative power sources. However, the main challenges (low energy density, relatively low power density, poor operational stability, and limited voltage output) hinder future applications of EFCs. This review aims at exploring the underlying mechanism of EFCs and providing possible practical strategies, methodologies and insights to tackle these issues. First, this review summarizes approaches in achieving high energy densities in EFCs, particularly, employing enzyme cascades for the deep/complete oxidation of fuels. Second, strategies for increasing power densities in EFCs, including increasing enzyme activities, facilitating electron transfers, employing nanomaterials, and designing more efficient enzyme-electrode interfaces, are described. The potential of EFCs/(super)capacitor combination is discussed. Third, the review evaluates a range of strategies for improving the stability of EFCs, including the use of different enzyme immobilization approaches, tuning enzyme properties, designing protective matrixes, and using microbial surface displaying enzymes. Fourth, approaches for the improvement of the cell voltage of EFCs are highlighted. Finally, future developments and a prospective on EFCs are envisioned.

Multimerization of an Alcohol Dehydrogenase by Fusion to a Designed Self-Assembling Protein Results in Enhanced Bioelectrocatalytic Operational Stability

Proteins designed for supramolecular assembly provide a simple means to immobilize and organize enzymes for biotechnology applications. We have genetically fused the thermostable alcohol dehydrogenase D (AdhD) from Pyrococcus furiosus to a computationally designed cage-forming protein (O3-33). The trimeric form of the O3-33-AdhD fusion protein was most active in solution. The immobilization of the fusion protein on bioelectrodes leads to a doubling of the electrochemical operational stability as compared to the unfused control proteins. Thus, the fusion of enzymes to the designed self-assembling domains offers a simple strategy to increase the stability in biocatalytic systems.

Catalysis of Thermostable Alcohol Dehydrogenase Improved by Engineering the Microenvironment through Fusion with Supercharged Proteins

The enzymatic microenvironment can impact biocatalytic activity; however, these effects can be difficult to investigate as mutations and fusions can introduce multiple variables and overlapping effects. The fusion of a supercharged protein is a potentially facile means to alter the enzymatic microenvironment. We have investigated complexes made between a thermostable alcohol dehydrogenase (AdhD) and superfolding green fluorescent protein (sfGFP) mutants with extreme surface charges. Three charged sfGFP variants, -30, 0, and +36 were covalently attached to AdhD through the SpyCatcher/SpyTag system. Specific rates for the NAD⁺ -dependent oxidation of butane-2,3-diol were significantly increased in the -30 sfGFP complex, a mixed effect was seen for the 0 sfGFP complexes, and the rates were unaffected by +36 sfGFP complexation. Reactions performed at various pH values (7.8-9.8) and salt concentrations (7.75-500 mm) showed that there was a complex interplay between these effects that was consistent with fusion proteins affecting the local ionic strength, as opposed to the local pH. Steady-state kinetic analyses were performed with the -30 and 0 AdhD-sfGFP complexes. The overall catalytic efficiency was dependent on the charge of the fused sfGFP variant; the -30 sfGFP fusions exhibited the largest beneficial effects at pH 8.8. The impact of the fusions on the apparent ionic strength provides further insight into the effects of charged patches observed on metabolon-forming enzyme complexes.

Upgraded Bioelectrocatalytic N2 Fixation: From N2 to Chiral Amine Intermediates

Enantiomerically pure chiral amines are of increasing value in the preparation of bioactive compounds, pharmaceuticals, and agrochemicals. ω-Transaminase (ω-TA) is an ideal catalyst for asymmetric amination because of its excellent enantioselectivity and wide substrate scope. To shift the equilibrium of reactions catalyzed by ω-TA to the side of the amine product, an upgraded N₂ fixation system based on bioelectrocatalysis was developed to realize the conversion from N₂ to chiral amine intermediates. The produced NH₃ was in situ reacted with l-alanine dehydrogenase to generate alanine with NADH as a coenzyme. ω-TA transferred the amino group from alanine to ketone substrates and finally produced the desired chiral amine intermediates. The cathode of the upgraded N₂ fixation system supplied enough reducing power to synchronously realize the regeneration of reduced methyl viologen (MV^•+) and NADH for the nitrogenase and l-alanine dehydrogenase. The coproduct, pyruvate, was consumed by l-alanine dehydrogenase to regenerate alanine and push the equilibrium to the side of amine. After 10 h of reaction, the concentration of 1-methyl-3-phenylpropylamine achieved 0.54 mM with the 27.6% highest faradaic efficiency and >99% enantiomeric excess (ee_p). Because of the wide substrate scope and excellent enantioselectivity of ω-TA, the upgraded N₂ fixation system has great potential to produce a variety of chiral amine intermediates for pharmaceuticals and other applications.

Synthetic Biomimetic Coenzymes and Alcohol Dehydrogenases for Asymmetric Catalysis

Redox reactions catalyzed by highly selective nicotinamide-dependent oxidoreductases are rising to prominence in industry. The cost of nicotinamide adenine dinucleotide coenzymes has led to the use of well-established elaborate regeneration systems and more recently alternative synthetic biomimetic cofactors. These biomimetics are highly attractive to use with ketoreductases for asymmetric catalysis. In this work, we show that the commonly studied cofactor analogue 1-benzyl-1,4-dihydronicotinamide (BNAH) can be used with alcohol dehydrogenases (ADHs) under certain conditions. First, we carried out the rhodium-catalyzed recycling of BNAH with horse liver ADH (HLADH), observing enantioenriched product only with unpurified enzyme. Then, a series of cell-free extracts and purified ketoreductases were screened with BNAH. The use of unpurified enzyme led to product formation, whereas upon dialysis or further purification no product was observed. Several other biomimetics were screened with various ADHs and showed no or very low activity, but also no inhibition. BNAH as a hydride source was shown to directly reduce nicotinamide adenine dinucleotide (NAD) to NADH. A formate dehydrogenase could also mediate the reduction of NAD from BNAH. BNAH was established to show no or very low activity with ADHs and could be used as a hydride donor to recycle NADH.

Creation of a formate: malate oxidoreductase by fusion of dehydrogenase enzymes with PEGylated cofactor swing arms

Enzymatic biocatalysis can be limited by the necessity of soluble cofactors. Here, we introduced PEGylated nicotinamide adenine dinucleotide (NAD(H)) swing arms to two covalently fused dehydrogenase enzymes to eliminate their nicotinamide cofactor requirements. A formate dehydrogenase and cytosolic malate dehydrogenase were connected via SpyCatcher-SpyTag fusions. Bifunctionalized polyethylene glycol chains tethered NAD(H) to the fusion protein. This produced a formate:malate oxidoreductase that exhibited cofactor-independent ping-pong kinetics with predictable Michaelis constants. Kinetic modeling was used to explore the effective cofactor concentrations available for electron transfer in the complexes. This approach could be used to create additional cofactor-independent transhydrogenase biocatalysts by swapping fused dehydrogenases.

Biotechnology of extremely thermophilic archaea

Although the extremely thermophilic archaea (Topt ≥ 70°C) may be the most primitive extant forms of life, they have been studied to a limited extent relative to mesophilic microorganisms. Many of these organisms have unique biochemical and physiological characteristics with important biotechnological implications. These include methanogens that generate methane, fermentative anaerobes that produce hydrogen gas with high efficiency, and acidophiles that can mobilize base, precious and strategic metals from mineral ores. Extremely thermophilic archaea have also been a valuable source of thermoactive, thermostable biocatalysts, but their use as cellular systems has been limited because of the general lack of facile genetics tools. This situation has changed recently, however, thereby providing an important avenue for understanding their metabolic and physiological details and also opening up opportunities for metabolic engineering efforts. Along these lines, extremely thermophilic archaea have recently been engineered to produce a variety of alcohols and industrial chemicals, in some cases incorporating CO2 into the final product. There are barriers and challenges to these organisms reaching their full potential as industrial microorganisms but, if these can be overcome, a new dimension for biotechnology will be forthcoming that strategically exploits biology at high temperatures.

Enzymatic Nanocomposites with Radio Frequency Field-Modulated Activity

The control over enzymatic activity by physical stimuli is of interest to many applications in medicine, biotechnology, synthetic biology, and nanobionics. Although the main focus has been on optically responsive systems, alternative strategies to modulate the enzymatic activity of hybrid systems are needed. Here we describe a radiofrequency (RF) field controlled catalytic activity of an enzymatic sol-gel composite. Specifically, the activity of bovine carbonic anhydrase entrapped in sol-gel-derived magnetite (enzyme@ferria) composite was accelerated by a factor of 460% compared to its initial value, by applying the RF field of 937 A/m, with fast response time. This acceleration is reversible and its magnitude controllable. An acceleration mechanism, based on RF-induced heating of the magnetite by the Néel relaxation effect, is proposed and proven. The entrapment within a sol-gel matrix solves the problem of enhancing activity by heating without denaturing the enzyme. RF-controlled enzymatic composites can be potentially applied as biological RF sensors or to control biochemical reactions within living organisms.

Applications of Emerging Bioelectrochemical Technologies in Agricultural Systems: A Current Review

Background: Bioelectrochemical systems (BESs) are emerging energy-effective and environment-friendly technologies. Different applications of BESs are able to effectively minimize wastes and treat wastewater while simultaneously recovering electricity, biohydrogen and other value-added chemicals via specific redox reactions. Although there are many studies that have greatly advanced the performance of BESs over the last decade, research and reviews on agriculture-relevant applications of BESs are very limited. Considering the increasing demand for food, energy and water due to human population expansion, novel technologies are urgently needed to promote productivity and sustainability in agriculture. Methodology: This review study is based on an extensive literature search regarding agriculture-related BES studies mainly in the last decades (i.e., 2009–2018). The databases used in this review study include Scopus, Google Scholar and Web of Science. The current and future applications of bioelectrochemical technologies in agriculture have been discussed. Findings/Conclusions: BESs have the potential to recover considerable amounts of electric power and energy chemicals from agricultural wastes and wastewater. The recovered energy can be used to reduce the energy input into agricultural systems. Other resources and value-added chemicals such as biofuels, plant nutrients and irrigation water can also be produced in BESs. In addition, BESs may replace unsustainable batteries to power remote sensors or be designed as biosensors for agricultural monitoring. The possible applications to produce food without sunlight and remediate contaminated soils using BESs have also been discussed. At the same time, agricultural wastes can also be processed into construction materials or biochar electrodes/electrocatalysts for reducing the high costs of current BESs. Future studies should evaluate the long-term performance and stability of on-farm BES applications.

Biomimetic cofactors and methods for their recycling

Nicotinamide cofactor biomimetics (NCBs) belong to a class of compounds that, as the name suggests, mimic the structures and functions of natural nicotinamide cofactors, namely nicotinamide adenine dinucleotide and nicotinamide adenine dinucleotide phosphate and their corresponding reduced forms. The first set of NCBs was discovered in the 1930s; these were initially used to study the chemical properties of this class of cofactors as well as understand nicotinamide binding of oxidoreductases. Since then, various NCBs, enzymes, and recycling systems have evolved and lately, new NCBs have been developed and used to run biocatalytic reactions.

Engineering enzyme microenvironments for enhanced biocatalysis

Protein engineering provides a means to alter protein structure leading to new functions. Much work has focused on the engineering of enzyme active sites to enhance catalytic activity, however there is an increasing trend towards engineering other aspects of biocatalysts as these efforts can also lead to useful improvements. This tutorial discusses recent advances in engineering an enzyme's local chemical and physical environment, with the goal of enhancing enzyme reaction kinetics, substrate selectivity, and activity in harsh conditions (e.g., low or high pH). By introducing stimuli-responsiveness to these enzyme modifications, dynamic control of activity also becomes possible. These new biomolecular and protein engineering techniques are separate and independent from traditional active site engineering and can therefore be applied synergistically to create new biocatalyst technologies with novel functions.

Protein engineering of oxidoreductases utilizing nicotinamide-based coenzymes, with applications in synthetic biology

Two natural nicotinamide-based coenzymes (NAD and NADP) are indispensably required by the vast majority of oxidoreductases for catabolism and anabolism, respectively. Most NAD(P)-dependent oxidoreductases prefer one coenzyme as an electron acceptor or donor to the other depending on their different metabolic roles. This coenzyme preference associated with coenzyme imbalance presents some challenges for the construction of high-efficiency in vivo and in vitro synthetic biology pathways. Changing the coenzyme preference of NAD(P)-dependent oxidoreductases is an important area of protein engineering, which is closely related to product-oriented synthetic biology projects. This review focuses on the methodology of nicotinamide-based coenzyme engineering, with its application in improving product yields and decreasing production costs. Biomimetic nicotinamide-containing coenzymes have been proposed to replace natural coenzymes because they are more stable and less costly than natural coenzymes. Recent advances in the switching of coenzyme preference from natural to biomimetic coenzymes are also covered in this review. Engineering coenzyme preferences from natural to biomimetic coenzymes has become an important direction for coenzyme engineering, especially for in vitro synthetic pathways and in vivo bioorthogonal redox pathways.

Coenzyme Engineering of a Hyperthermophilic 6-Phosphogluconate Dehydrogenase from NADP+ to NAD+ with Its Application to Biobatteries

Engineering the coenzyme specificity of redox enzymes plays an important role in metabolic engineering, synthetic biology, and biocatalysis, but it has rarely been applied to bioelectrochemistry. Here we develop a rational design strategy to change the coenzyme specificity of 6-phosphogluconate dehydrogenase (6PGDH) from a hyperthermophilic bacterium Thermotoga maritima from its natural coenzyme NADP⁺ to NAD⁺. Through amino acid-sequence alignment of NADP⁺- and NAD⁺-preferred 6PGDH enzymes and computer-aided substrate-coenzyme docking, the key amino acid residues responsible for binding the phosphate group of NADP⁺ were identified. Four mutants were obtained via site-directed mutagenesis. The best mutant N32E/R33I/T34I exhibited a ~6.4 × 10⁴-fold reversal of the coenzyme selectivity from NADP⁺ to NAD⁺. The maximum power density and current density of the biobattery catalyzed by the mutant were 0.135 mW cm⁻² and 0.255 mA cm⁻², ~25% higher than those obtained from the wide-type 6PGDH-based biobattery at the room temperature. By using this 6PGDH mutant, the optimal temperature of running the biobattery was as high as 65 °C, leading to a high power density of 1.75 mW cm⁻². This study demonstrates coenzyme engineering of a hyperthermophilic 6PGDH and its application to high-temperature biobatteries.

Extreme makeover: Engineering the activity of a thermostable alcohol dehydrogenase (AdhD) from Pyrococcus furiosus

Alcohol dehydrogenase D (AdhD) is a monomeric thermostable alcohol dehydrogenase from the aldo-keto reductase (AKR) superfamily of proteins. We have been exploring various strategies of engineering the activity of AdhD so that it could be employed in future biotechnology applications. Driven by insights made in other AKRs, we have made mutations in the cofactor-binding pocket of the enzyme and broadened its cofactor specificity. A pre-steady state kinetic analysis yielded new insights into the conformational behavior of this enzyme. The most active mutant enzyme concomitantly gained activity with a non-native cofactor, nicotinamide mononucleotide, NMN(H), and an enzymatic biofuel cell was demonstrated with this enzyme/cofactor pair. Substrate specificity was altered by grafting loop regions near the active site pocket from a mesostable human aldose reductase (hAR) onto the thermostable AdhD. These moves not only transferred the substrate specificity of hAR but also the cofactor specificity of hAR. We have added alpha-helical appendages to AdhD to enable it to self-assemble into a thermostable catalytic proteinaceous hydrogel. As our understanding of the structure/function relationship in AdhD and other AKRs advances, this ubiquitous protein scaffold could be engineered for a variety of catalytic activities that will be useful for many future applications.

Printable enzyme-embedded materials for methane to methanol conversion

An industrial process for the selective activation of methane under mild conditions would be highly valuable for controlling emissions to the environment and for utilizing vast new sources of natural gas. The only selective catalysts for methane activation and conversion to methanol under mild conditions are methane monooxygenases (MMOs) found in methanotrophic bacteria; however, these enzymes are not amenable to standard enzyme immobilization approaches. Using particulate methane monooxygenase (pMMO), we create a biocatalytic polymer material that converts methane to methanol. We demonstrate embedding the material within a silicone lattice to create mechanically robust, gas-permeable membranes, and direct printing of micron-scale structures with controlled geometry. Remarkably, the enzymes retain up to 100% activity in the polymer construct. The printed enzyme-embedded polymer motif is highly flexible for future development and should be useful in a wide range of applications, especially those involving gas–liquid reactions.

There is a need for small-scale reactors that convert methane emissions to more valuable products to reduce climate impacts. Here, the authors show that printing 3D structures of the pMMO enzyme enables continuous methane conversion under ambient conditions and reduces mass transfer limitations.