Synthesis of Amides via the Amination of Aldehydes with Hydroxylamines Promoted by TBAF·3H2O

A metal-free, mild, and efficient method for the synthesis of amides has been developed from the amination of aldehydes with hydroxylamines promoted by TBAF·3H2O in the presence of KOH. Control experiments showed that the nitrone was the intermediate of this amination. By this method, a series of amides, biologically active compounds bebenil and a COX inhibitor were obtained in moderate to good yields.

Sugar-Based Surfactants: Effects of Structural Features on the Physicochemical Properties of Sugar Esters and Their Comparison to Commercial Octyl Glycosides

Two series of sugar esters with alkyl chain lengths varying from 5 to 12 carbon atoms, and with a head group consisting of glucose or galactose moieties, were synthesized. Equilibrium surface tension isotherms were measured, yielding critical micellar concentration (CMC) surface tensions at CMC (γcmc) and minimum areas at the air-water interface (Amin). In addition, Krafft temperatures (Tks) were measured to characterize the ability of molecules to dissolve in water, which is essential in numerous applications. As a comparison to widely used commercial sugar-based surfactants, those measurements were also carried out for four octyl d-glycosides. Impacts of the linkages between polar and lipophilic moieties, alkyl chain lengths, and the nature of the sugar head group on the measured properties were highlighted. Higher Tk and, thus, lower dissolution ability, were found for methyl 6-O-acyl-d-glucopyranosides. CMC and γcmc decreased with the alkyl chain lengths in both cases, but Amin did not appear to be influenced. Both γcmc and Amin appeared independent of the ester group orientation. Notably, alkyl (methyl α-d-glucopyranosid)uronates were found to result in noticeably lower CMC, possibly due to a closer distance between the carbonyl function and the head group.

Exploring the Versatility of the Amidation of Aryl Acid Fluorides using the Germylamines R3 GeNMe2

The formation of amide bonds is an important process since this linkage is an essential component in proteins, pharmaceuticals, and other medicinally and biologically significant molecules. Recently, it was demonstrated that germylamines R3 GeNR'2 were useful reagents for the conversion of acid fluorides to amides. This transformation occurs readily at room temperature and has a low activation energy. In the present study, the versatility of this amidation reaction with aryl acid fluorides is investigated. A series of thirteen acid fluorides with various substituents on the aromatic ring were reacted with the germylamine Ph3 GeNMe2 and twelve of these were converted to the corresponding amides in high yields, the exception being 1,4-benzenedicarbonyl difluoride. The germylamines Bun 3 GeNMe2 and Pri 3 GeNMe2 also could be used for this interconversion, and both of these species successfully converted 1,4-benzenedicarbonyl difluoride to the corresponding amide. In addition, the crystal structure of Ph3 GeNMe2 is reported. This represents one of only three crystallographically characterized germylamines. The synthesis and 19 F NMR characterization of three fluorogermanes R3 GeF (R=Bun , Pri , and Mes) are also reported herein.

Functionalized quinolizinium-based fluorescent reagents for modification of cysteine-containing peptides and proteins

A series of quinolizinium-based fluorescent reagents were prepared by visible light-mediated gold-catalyzed cis-difunctionalization between quinolinium diazonium salts and electron-deficient alkyne-linked phenylethynyl trimethylsilanes. The electron-deficient alkynyl group of the quinolizinium-based fluorescent reagents underwent nucleophilic addition reaction with the sulfhydryl group on cysteine-containing peptides and proteins. The quinolizinium-based fluorescent reagents were found to function as highly selective reagents for the modification of cysteine-containing peptides and proteins with good to excellent conversions (up to 99%). Moreover, the modified BCArg mutants bearing cationic quinolizinium compounds 1b, 1d, 1e and 1h exhibit comparable activity in enzymatic and cytotoxicity assays to the unmodified one.

Atom-economic amide synthesis by using an iron-substituted polyoxometalate catalyst

We report an efficient and economical amidation strategy by using a polyoxometalate-based iron catalyst that affords the corresponding amide products in good yields. All of the aliphatic, aromatic and heterocyclic substrates are produced in high yields without additional base or organic ligands. Most importantly, the first example of heterogeneous iron(III)-catalyzed formation of the diamides is developed.

Photochemical Activation of Aromatic Aldehydes: Synthesis of Amides, Hydroxamic Acids and Esters

A cheap, facile and metal-free photochemical protocol for the activation of aromatic aldehydes has been developed. Utilizing thioxanthen-9-one as the photocatalyst and cheap household lamps as the light source, a variety of aromatic aldehydes have been activated and subsequently converted in a one-pot reaction into amides, hydroxamic acids and esters in good to high yields. The applicability of this method was highlighted in the synthesis of Moclobemide, a drug against depression and social anxiety. Extended and detailed mechanistic studies have been conducted, in order to determine a plausible mechanism for the reaction.

CuO-decorated magnetite-reduced graphene oxide: a robust and promising heterogeneous catalyst for the oxidative amidation of methylarenes in water via benzylic sp3 C–H activation

CuO-decorated magnetite-reduced graphene oxide: a heterogeneous catalyst for the oxidative amidation of methylarenes in water at room temperature.

Mechanistic Insights into La-Catalyzed Amidation of Aldehyde with Amine

A new mechanism of La-catalyzed amidation of N-methylbenzylamine with p-chlorobenzaldehyde has been computationally proposed, where L₂La[NR₁R₂] (I) rather than previously proposed L₂La[OCHRNR₁R₂] (II) is the catalytically active species. Interestingly, the side-product alcohol acting as a proton relay to reduce reaction energy barrier could participate in the regeneration of I. Besides, DFT calculations suggest that an addition of alcohol additive into the initial reaction system could accelerate the reaction, which has been further verified by experiments.

Ce(iii)-catalyzed highly efficient synthesis of pyridyl benzamides from aminopyridines and nitroolefins without external oxidants

An efficient synthesis of a variety of pyridyl benzamides from 2-aminopyridines and nitroolefins is described. This rare-earth-metal-catalyzed reaction provides the corresponding products with broad substrate scope in moderate to excellent yields, in the absence of additives and external oxidants. Water is used as the source of the carbonyl oxygen atom in pyridyl benzamides. Furthermore, 2-substituted oxazolo[4,5-b]pyridines are formed in good yields under the standard conditions when 2-aminopyridin-3-ols are used as the substrates.

Photosensitizer-free visible light-mediated gold-catalysed cis-difunctionalization of silyl-substituted alkynes

A new photosensitizer-free visible light-mediated gold-catalysed cis-difunctionalization reaction is developed.

A new photosensitizer-free visible light-mediated gold-catalysed cis-difunctionalization reaction is developed. The reaction was chemoselective towards silyl-substituted alkynes with excellent regioselectivity and good functional group compatibility, giving a series of silyl-substituted quinolizinium derivatives as products. The newly synthesized fluorescent quinolizinium compounds, named JR-Fluor-1, possessed tunable emission properties and large Stokes shifts. With unique photophysical properties, the fluorophores have been applied in photooxidative amidations as efficient photocatalysts and cellular imaging with switchable subcellular localization properties.

Synthesis of N-acetoxy-N-arylamides via diacetoxyiodobenzene promoted double acylation reaction of hydroxylamines with aldehydes

A facile and efficient synthesis of N-acetoxy-N-arylamides through double acylations of hydroxylamines with aldehydes and diacetoxyiodobenzene is reported. The yields of the products are good to excellent.

Ruthenium-catalyzed oxidative decyanative cross-coupling of acetonitriles with amines in air: a general access to primary to tertiary amides under mild conditions

C–CN activation catalyzed by Ru/C in open air was achieved, affording an efficient access to primary, secondary and tertiary amides under mild conditions.

Photocatalytic N-formylation of amines via a reductive quenching cycle in the presence of air

Photochemical N-formylation of amines was achieved without any additional formylating agents in the presence of air. Mechanistic investigations suggest a reaction pathway proceeding via the addition of in situ formed radical cations of enamines with photochemically generated superoxide radical anions.

Formation of N-sulfonyl imines from iminoiodinanes by iodine-promoted, N-centered radical sulfonamidation of aldehydes

A light-promoted, non-traditional carbonyl activation via a N-centered radical (NCR) species to produce activated imines using iminoiodinanes is reported.

Copper-Catalyzed Aerobic Oxidative Amidation of Benzyl Alcohols

A Cu-catalyzed synthesis of amides from alcohols and secondary amines using the oxygen in air as the terminal oxidant has been developed. The methodology is operationally simple requiring no high pressure equipment or handling of pure oxygen. The commercially available, nonprecious metal catalyst, Cu(phen)Cl₂, in conjunction with di-tert-butyl hydrazine dicarboxylate and an inorganic base provides a variety of benzamides in moderate to excellent yields. The pK_a of amine conjugate acid and electronics of alcohol were shown to impact the selection of base for optimal reactivity. A mechanism consistent with the observed reactivity trends, KIE, and Hammett study is proposed.

Nonclassical Routes for Amide Bond Formation

The present review offers an overview of nonclassical (e.g., with no pre- or in situ activation of a carboxylic acid partner) approaches for the construction of amide bonds. The review aims to comprehensively discuss relevant work, which was mainly done in the field in the last 20 years. Organization of the data follows a subdivision according to substrate classes: catalytic direct formation of amides from carboxylic and amines ( section 2 ); the use of carboxylic acid surrogates ( section 3 ); and the use of amine surrogates ( section 4 ). The ligation strategies (NCL, Staudinger, KAHA, KATs, etc.) that could involve both carboxylic acid and amine surrogates are treated separately in section 5 .

Synthesis of 2-Aminobutene-1,4-Diones by Gold-Catalysed Three-Component Coupling Reactions

A gold-catalysed three-component coupling reaction of phenylglyoxal derivatives, alkynes and secondary amines was developed to provide a novel one-pot synthesis of 2-aminobutene-1,4-diones in moderate to good yields.

Visible-Light-Mediated Synthesis of Amides from Aldehydes and Amines via in Situ Acid Chloride Formation

An efficient visible-light photocatalysis-based one-pot amide synthesis method was developed; visible-light irradiation of a mixture of an aldehyde, tert-butyl hydrogen peroxide, and N-chlorosuccinimide using a Ru(bpy)3Cl2 photocatalyst afforded an acid chloride, which subsequently reacted with amine to yield the corresponding amide. The reaction was used to synthesize moclobemide and a D3 receptor intermediate.

Green synthesis of primary, secondary, and tertiary amides through oxidative amidation of methyl groups with amine hydrochlorides over recyclable CoFe2O4 NPs

This protocol provides high yield, short reaction time, and operational simplicity, green and low cast procedure for the synthesis of all types of amides.

Direct oxidative amidation of aldehydes with amines catalyzed by heteropolyanion-based ionic liquids under solvent-free conditions via a dual-catalysis process

A heteropolyanion-based ionic liquid catalyzed oxidative amidation of aldehydes with amines via a dual-catalysis pathway has been reported.

BODIPY catalyzed amide synthesis promoted by BHT and air under visible light

A novel and efficient protocol for the synthesis of amides is reported via a BODIPY catalyzed oxidative amidation of aromatic aldehydes under visible light, with broad substrate scope and mild reaction conditions. Mechanistic studies reveal that dioxygen could be activated through both an ET and SET pathway to form the active peroxide intermediates.

Copper-catalyzed efficient direct amidation of 2-methylquinolines with amines

A novel Cu-catalyzed direct amidation of 2-methylquinolines with amines is described. This method afforded an efficient approach for the synthesis of biologically important aromatic amides from readily available coupling partners using molecular oxygen as the oxidant.

Catalyst-free amidation of aldehyde with amine under mild conditions

A highly efficient, catalyst-free and one-pot procedure for the direct synthesis of amides from aldehydes and amines under mild conditions has been developed.

N-heterocyclic carbene-based ruthenium-catalyzed direct amidation of aldehydes with amines

Ru-catalyzed dehydrogenative amide synthesis from aldehydes and amines was achieved, based on the idea of using a hemiaminal intermediate to generate the active Ru-hydride species.

Copper-catalyzed aerobic oxidative inert C-C and C-N bond cleavage: a new strategy for the synthesis of tertiary amides

A copper-catalyzed aerobic oxidative amidation reaction of inert C-C bonds with tertiary amines has been developed for the synthesis of tertiary amides, which are significant units in many natural products, pharmaceuticals, and fine chemicals. This method combines C-C bond activation, C-N bond cleavage, and C-H bond oxygenation in a one-pot protocol, using molecular oxygen as the sole oxidant without any additional ligands.

N-Terminal α-amino group modification of peptides by an oxime formation-exchange reaction sequence

A site-specific and efficient method for N-terminal modification of peptides using oxone for selective oxidation of N-terminal α-amino groups of peptides to oximes followed by transoximation with O-substituted hydroxylamines has been developed.