Physiochemical characterization of metal organic framework materials: A mini review

Metal-organic frameworks (MOFs) are promising materials offering exceptional performance across a myriad of applications, attributable to their remarkable physicochemical properties such as regular porosity, crystalline structure, and tailored functional groups. Despite their potential, there is a lack of dedicated reviews that focus on key physicochemical characterizations of MOFs for the beginners and new researchers in the field. This review is written based on our expertise in the synthesis and characterization of MOFs, specifically to provide a right direction for the researcher who is a beginner in this area. In this way, experimental errors can be reduced, and wastage of time and chemicals can be avoided when new researchers conduct a study. In this article, this topic is critically analyzed, and findings and conclusions are presented. We reviewed three well-known XRD techniques, including PXRD, single crystal XRD, and SAXS, which were used for XRD analysis depending on the crystal size and the quality of crystal morphology. The TGA profile was an effective factor for evaluating the quality of the activation process and for ensuring the successful investigation for other characterizations. The BET and pore size were significantly affected by the activation process and selective benzene chain cross-linkers. FTIR is a prominent method that is used to investigate the functional groups on pore surfaces, and this method is successfully used to evaluate the activation process, characterize functionalized MOFs, and estimate their applications. The most significant methods of characterization include the X-ray diffraction, which is utilized for structural identification, and thermogravimetric analysis (TGA), which is used for exploring thermal decomposition. It is important to note that the thermal stability of MOFs is influenced by two main factors: the metal-ligand interaction and the type of functional groups attached to the organic ligand. The textural properties of the MOFs, on the other hand, can be scrutinized through nitrogen adsorption-desorption isotherms experiments at 77 K. However, for smaller pore size, the Argon adsorption-desorption isotherm at 87.3 K is preferred. Furthermore, the CO2 adsorption isotherm at 273 K can be used to measure ultra-micropore sizes and sizes lower than these, which cannot be measured by using the N2 adsorption-desorption isotherm at 77 K. The highest BET was observed in high-valence MOFs that are constructed based on the metal-oxo cluster, which has an excellent ability to control their textural properties. It was found that the synthesis procedure (including the choice of solvent, cross-linker, secondary metal, surface functional groups, and temperature), activation method, and pressure significantly impact the surface area of the MOF and, by extension, its structural integrity. Additionally, Fourier-transform infrared spectroscopy plays a crucial role in identifying active MOF functional groups. Understanding these physicochemical properties and utilizing relevant characterization techniques will enable more precise MOF selection for specific applications.

Effect of Modulation and Functionalization of UiO-66 Type MOFs on Their Surface Thermodynamic Properties and Lewis Acid–Base Behavior

In this study, we investigated the surface thermodynamic properties of four MOF structures of the UiO-66 series, by employing seven molecular models, a thermal model, and three other methods using the inverse gas chromatography (IGC) technique at infinite dilution. We first determined the effect of the modulation of UiO-66 by an acid (e.g., formic acid and acetic acid) and on the other hand, we studied the effect of the functionalization of the organic linker by an amine group (NH2) on their dispersive component of the surface energy and on their Lewis acid–base properties. We found that all the studied MOFs presented an amphoteric character with a strong acidity whose acidity/basicity ratio is greater than 1 using all the models and methods in IGC. Moreover, the introduction of a modulator such as acetic acid or formic acid in the synthesis of these MOFs increased the number of structural defects and therefore increased the acidity of these MOFs. Similarly, the functionalization of the MOF by the NH2 group leads to an increase in the basicity constant of the functionalized MOF while remaining smaller than their acidity constant. In addition, the use of acids as modulators and amine groups as functional groups resulted in an increase in the dispersive component of the surface energy of the MOFs. Finally, comparing the results obtained by the different models and methods and based on the increasing order of the acidity of each MOF, it was clear that the thermal model resulted in more exact and precise values than the others. Our findings pave the way for the design and development of new acid catalysts based on UiO-66 structures.

Confined-based catalyst investigation through the comparative functionalization and defunctionalization of Zr-MOF

In metal-organic frameworks, confined space as a chemical nanoreactor is as important as organocatalysis or coordinatively unsaturated metal site catalysis. In the present study, a set of mixed-ligand structures with UiO-66 architecture have been prepared. To the best of our knowledge, for the first time, structures derived by the solvothermal mixing ligand method and ultrasonic-assisted linker exchange approaches have been compared. Additionally, the relationship between the preparation method, structural properties, and catalytic efficiency of the prepared materials in the Knoevenagel condensation of aldehydes has been investigated. The prepared catalyst is very stable and can be recovered and reused for at least ten periods.

Impact of Structural Functionalization, Pore Size, and Presence of Extra-Framework Ions on the Capture of Gaseous I2 by MOF Materials

A computational approach is used on MOF materials to predict the structures showing the best performances for I2 adsorption as a function of the functionalization, the pore size, the presence of the compensating ions, and the flexibility on which to base future improvements in selected materials in view of their targeted application. Such an approach can be generalized for the adsorption of other gases or vapors. Following the results from the simulations, it was evidenced that the maximum capacity of I2 adsorption by MOF solids with longer organic moieties and larger pores could exceed that of previously tested materials. In particular, the best retention performance was evidenced for MIL-100-BTB. However, if the capacity to retain traces of gaseous I2 on the surface is considered, MIL-101-2CH3, MIL-101-2CF3, and UiO-66-2CH3 appear more promising. Furthermore, the impact of temperature is also investigated.

Co-Zn-MOFs Derived N-Doped Carbon Nanotubes with Crystalline Co Nanoparticles Embedded as Effective Oxygen Electrocatalysts

The oxygen reduction reaction (ORR) is a crucial step in fuel cells and metal-air batteries. It is necessary to expand the range of efficient non-precious ORR electrocatalysts on account of the low abundance and high cost of Pt/C catalysts. Herein, we synthesized crystalline cobalt-embedded N-doped carbon nanotubes (Co@CNTs-T) via facile carbonization of Co/Zn metal-organic frameworks (MOFs) with dicyandiamide at different temperatures (t = 600, 700, 800, 900 °C). Co@CNTs- 800 possessed excellent ORR activities in alkaline electrolytes with a half wave potential of 0.846 V vs. RHE (Reversible Hydrogen Electrode), which was comparable to Pt/C. This three-dimensional network, formed by Co@CNTs-T, facilitated electron migration and ion diffusion during the ORR process. The carbon shell surrounding the Co nanoparticles resulted in Co@CNTs-800 being stable as an electrocatalyst. This work provides a new strategy to design efficient and low-cost oxygen catalysts.

Co0·5Ni0·5FeCrO4 spinel nanoparticles decorated with UiO-66-based metal-organic frameworks grafted onto GO and O-SWCNT for gas adsorption and water purification

We report on the synthesis of unique nanocomposites based on graphene oxide (GO) and oxidized single-wall carbon nanotubes (O-SWCNTs) combined with UiO-66-NH₂ and UiO-66-COOH metal-organic frameworks (MOFs) decorated onto Co_0·5Ni₀·₅FeCrO₄ spinel magnetic nanoparticles (SMNPs). Novel SMNPs of Co_0·5Ni_0·5FeCrO_4, synthesized for the first time by the sol-gel method, exhibited exceptional thermal stability up to 985 °C. To modify the physicochemical properties of the SMNPs and MOFs, hydrophilic Zr-based MOFs were directly decorated onto the SMNP (MOF-d-SMNP) which led to improved dispersion properties and enhanced the catalytic activity of the SMNP by providing additional functional groups and active catalytic sites, along with surface area expansion. The synthesis and decoration were achieved by a hydrothermal process forming covalent bonding of MOFs onto the SMNPs, using O-SWCNTs and GO monolayers as platforms. Such an approach proved to be more effective than direct mixing of nanoparticles with the platforms, as it reduced the aggregation of nanoparticles and improved the dispersion forces of the MOF-d-SMNP. The MOF-d-SMNP/GO and MOF-d-SMNP/O-SWCNT nanocomposite properties were characterized by XRD, SEM-EDS, HRTEM, FTIR, TGA, gravimetric gas sorption and BET techniques. Performed experiments revealed exceptional adsorption capacity and catalytic activity (the reduction of the toxic pollutant 4-nitrophenol to 4-aminophenol). We demonstrated that novel nanocomposite materials MOF-d-SMNP/GO and MOF-d-SMNP/O-SWCNT showed potential for water treatment and gas sorption applications. Exhibited properties make these materials promising candidates for use in applications requiring, for example, catalytic activity at elevated temperatures.

Metal Organic Framework - Based Mixed Matrix Membranes for Carbon Dioxide Separation: Recent Advances and Future Directions

Gas separation and purification using polymeric membranes is a promising technology that constitutes an energy-efficient and eco-friendly process for large scale integration. However, pristine polymeric membranes typically suffer from the trade-off between permeability and selectivity represented by the Robeson's upper bound. Mixed matrix membranes (MMMs) synthesized by the addition of porous nano-fillers into polymer matrices, can enable a simultaneous increase in selectivity and permeability. Among the various porous fillers, metal-organic frameworks (MOFs) are recognized in recent days as a promising filler material for the fabrication of MMMs. In this article, we review representative examples of MMMs prepared by dispersion of MOFs into polymer matrices or by deposition on the surface of polymeric membranes. Addition of MOFs into other continuous phases, such as ionic liquids, are also included. CO2 separation from hydrocarbons, H2, N2, and the like is emphasized. Hybrid fillers based on composites of MOFs with other nanomaterials, e.g., of MOF/GO, MOF/CNTs, and functionalized MOFs, are also presented and discussed. Synergetic effects and the result of interactions between filler/matrix and filler/filler are reviewed, and the impact of filler and matrix types and compositions, filler loading, surface area, porosity, pore sizes, and surface functionalities on tuning permeability are discoursed. Finally, selectivity, thermal, chemical, and mechanical stability of the resulting MMMs are analyzed. The review concludes with a perspective of up-scaling of such systems for CO2 separation, including an overview of the most promising MMM systems.

Copper(II), Zinc(II), and Cadmium(II) Formylbenzoate Complexes: Reactivity and Emission Properties

Synthesis, characterization, reactivity, and sensing properties of 4-formylbenzoate complexes of copper(II), zinc(II), and cadmium(II) possessing the 1,10-phenanthroline ancillary ligand are studied. The crystal structures of the (1,10-phenanthroline)bis(4-formylbenzoate)(aqua)copper(II) and (1,10-phenanthroline)bis(4-formylbenzo-ate)zinc(II) and a novel molecular complex comprising an assembly of mononuclear and dinuclear species of (1,10-phenanthroline)bis(4-formylbenzoate)cadmium(II) are reported. These zinc and cadmium complexes are fluorescent; they show differentiable sensitivity to detect three positional isomers of nitroaniline. The mechanism of sensing of nitroanilines by 1,10-phenanthroline and the complexes are studied by fluorescence titrations, photoluminescence decay, and dynamic light scattering. A plausible mechanism showing that 1,10-phenanthroline ligand-based emission quenched by electron transfer from the excited state of 1,10-phenanthroline to nitroaniline is supported by density functional theory calculations. In an anticipation to generate a fluorescent d¹⁰-copper(I) formylbenzoate complex by a mild reducing agent such as hydroxylamine hydrochloride for similar sensing of nitroaromatics as that of the d¹⁰-zinc and cadmium 4-formylbenzoate complexes, reactivity of d⁹-copper(II) with hydroxylamine hydrochloride in the presence of 4-formylbenzoic acid and 1,10-phenanthroline is studied. It did not provide the expected copper(I) complex but resulted in stoichiometry-dependent reactions of 4-formylbenzoic acid with hydroxylamine hydrochloride in the presence of copper(II) acetate and 1,10-phenanthroline. Depending on the stoichiometry of reactants, an inclusion complex of bis(1,10-phenanthroline)(chloro)copper(II) chloride with in situ-formed 4-((hydroxyimino)methyl)benzoic acid or copper(II) 4-(hydroxycarbamoyl)benzoate complex was formed. The self-assembly of the inclusion complex has the bis(1,10-phenanthroline)(chloro)copper(II) cation encapsulated in hydrogen-bonded chloride-hydrate assembly with 4-((hydroxyimino)methyl)benzoic acid.

Heterometallic Alkaline Earth-Lanthanide Ba(II)-La(III) Microporous Metal-Organic Framework as Bifunctional Luminescent Probes of Al(3+) and MnO4(.)

In this work a rigid asymmetrical tricarboxylate ligand p-terphenyl-3,4″,5-tricarboxylic acid (H3L) has been employed, and a unique heterometallic alkaline earth-lanthanide microporous luminescent metal-organic framework (MOF) {[Ba3La0.5(μ3-L)2.5(H2O)3(DMF)]·(3DMF)}n (1·3DMF) (DMF = dimethylformamide) has been isolated under solvothermal conditions. Single-crystal X-ray structural analysis demonstrates that 2D inorganic Ba-O-La connectivity can be observed in 1, which are further bridged via rigid terphenyl backbones of L(3-), forming a unique I(2)O(1)-type microporous luminescent framework. A 1D microporous channel with dimensionality of 9.151(3) Å × 10.098(1) Å can be observed along the crystallographic a axis. PXRD patterns have been investigated indicating pure phases of 1. The luminescence explorations demonstrated that 1 exhibits highly selective and sensitive sensing for Al(3+) over other cations with high quenching efficiency Ksv value of 1.445 × 10(4) L·mol(-1) and low detection limit (1.11 μM (S/N = 3)). Meanwhile 1 also exhibits highly selective and sensitive sensing for MnO4(-) over other anions with quenching efficiency Ksv = 7.73 × 10(3) L·mol(-1) and low detection limit (0.28 μM (S/N = 3)). It is noted that, when different concentrations of MnO4(-) solutions (0.5 to 100 μM) were dropped into the suspension of 1, the bright blue luminescence of the suspension observed under UV light can gradually change into pink color, indicating visually luminescent sensing, which makes the detection process of MnO4(-) more convenient in practical. The result also reveals that 1 represents the first example of bifunctional heterometallic alkaline earth-lanthanide MOF-based luminescent probes for selectively detecting Al(3+) and MnO4(-) in the water solutions.

BODIPY-based conjugated microporous polymers as reusable heterogeneous photosensitisers in a photochemical flow reactor

Production of singlet oxygen at 530 nm in a flow reactor using novel BODIPY-based polymers as heterogeneous photosensitisers.

3,5-Bis((4′-carboxylbenzyl)oxy)benzoilate-based coordination polymers: their synthesis, structural characterization, and sensing properties

The structural characterization of four 3,5-bis((4′-carboxylbenzyl)oxy)benzoilate-based coordination polymers has been reported, and the sensing ability of 2 and 4 on NB has been investigated.

A rare three-coordinated zinc cluster–organic framework with two types of secondary building units

A rare three-coordinated zinc cluster–organic framework was constructed by two types of secondary building units and two polycarboxylate ligands.

A luminescent cadmium metal–organic framework for sensing of nitroaromatic explosives

A novel metal–organic framework 1 was synthesized using a new rigid unsymmetrical tricarboxylate ligand p-terphenyl-3,4′′,5 tricarboxylate (H₃TPT). The micrometer-sized material 1′ dispersed in ethanol exhibits high efficiency for the detection of PA.

A series of d10metal coordination polymers based on a flexible bis(2-methylbenzimidazole) ligand and different carboxylates: synthesis, structures, photoluminescence and catalytic properties

Six d¹⁰metal coordination polymers have been prepared and characterized. Complexes possess structural diversities with interesting topologies and high catalytic activities for the degradation of methyl orange.

Anomalous adsorption of biomolecules on a Zn-based metal–organic framework obtained via a facile room-temperature route

A new method for the crystal growth of two Zn-based MOFs at room temperature (known MOF-5 and a new modification of [{Zn₂(TBAPy)(H₂O)₂}·3.5DEF]_n).

One-dimensional water cages with repeat units of (H2O)24resembling pagodane trapped in a 3D coordination polymer: proton conduction and tunable luminescence emission by adsorption of anionic dyes

A 3D-coordination polymer was shown to trap one-dimensional polyhedral water cages consisting of repeat units of (H₂O)₂₄, the geometry of which resembles the exotic organic molecule pagodane.

Novel coordination polymers of Zn(ii) and Cd(ii) tuned by different aromatic polycarboxylates: synthesis, structures and photocatalytic properties

Six fascinating coordination polymers (CPs) showed good photocatalytic activities for the degradation of methylene blue (MB).