Fluorescent hydrogel formation from carboxyphenyl-terpyridine

Protein interactions, molecular docking, antimicrobial and antifungal studies of terpyridine ligands

Resistance to antibiotics/antibacterials/antifungals in pathogenic microbes has been developing over the past few decades and has recently become a commonplace public-health peril. Thus, alternative nontoxic potent antibiotic agents are covertly needed to control antibiotic-resistant outbreaks. In an effort to combat the challenges posed by the co-occurrence of multidrug resistance, two terpyridine ligands 4'-(4-N,N'-dimethylaminophenyl)-2,2':6',2″-terpyridine (L1) and 4'-(4-tolyl)-2,2':6',2″-terpyridine (L2) have been designed, prepared and confirmed their structure by spectral studies. Thereafter, antimicrobial assay was performed against gram positive and negative bacterial strains along with fungal strains. Both compounds L1 and L2 exhibited remarkable inhibitory activities against bacteria, Escherichia coli and Staphylococcus aureus at MIC values 6.25 and 3.125 µg/ml, respectively. In addition, in silico molecular docking studies were ascertained with bacterial DNA gyrase and fungal demethylase. Furthermore, both L1 and L2 could bind Bovine Serum Albumin (BSA) protein and binding interaction has been studied with the help of UV-Visible and fluorescence spectroscopy. While fluorescence of BSA unperturbed in the presence of L2, an addition of L1 to the solution of BSA resulted significant quenching. The binding constant calculations at different temperature confirmed that the fluorescence quenching between BSA and L1 is predominantly static in nature. The toxicity of L1 and L2 was checked using Drosophila melanogaster. The toxicity analysis suggest both the dyes are non-cytotoxic in nature.Communicated by Ramaswamy H. Sarma.

Self-strengthen luminescent hydrogel

For typical synthetic materials, continue mechanical loading usually cause damage and even failure, because they are closed systems, without substance exchange with surroundings and structural reconstruction after damage. Double-network (DN) hydrogels have recently been demonstrated to generate radicals under mechanical loading. In this work, DN hydrogel provided with sustained monomer and lanthanide complex supply undergo self-growth, and thus simultaneous self-strengthen in both mechanical performance and luminescence intensity are realized through bond rupture-initiated mechanoradical polymerization. This strategy proves the feasibility of imparting desired functions to the DN hydrogel by mechanical stamping, and provides a new strategy for the design of luminescent soft materials with high fatigue resistance.

Developing Novel Fabrication and Optimisation Strategies on Aggregation-Induced Emission Nanoprobe/Polyvinyl Alcohol Hydrogels for Bio-Applications

The current study describes a new technology, effective for readily preparing a fluorescent (FL) nanoprobe-based on hyperbranched polymer (HB) and aggregation-induced emission (AIE) fluorogen with high brightness to ultimately develop FL hydrogels. We prepared the AIE nanoprobe using a microfluidic platform to mix hyperbranched polymers (HB, generations 2, 3, and 4) with AIE (TPE-2BA) under shear stress and different rotation speeds (0-5 K RPM) and explored the FL properties of the AIE nanoprobe. Our results reveal that the use of HB generation 4 exhibits 30-times higher FL intensity compared to the AIE alone and is significantly brighter and more stable compared to those that are prepared using HB generations 3 and 2. In contrast to traditional methods, which are expensive and time-consuming and involve polymerization and post-functionalization to develop FL hyperbranched molecules, our proposed method offers a one-step method to prepare an AIE-HB nanoprobe with excellent FL characteristics. We employed the nanoprobe to fabricate fluorescent injectable bioadhesive gel and a hydrogel microchip based on polyvinyl alcohol (PVA). The addition of borax (50 mM) to the PVA + AIE nanoprobe results in the development of an injectable bioadhesive fluorescent gel with the ability to control AIEgen release for 300 min. When borax concentration increases two times (100 mM), the adhesion stress is more than two times bigger (7.1 mN/mm2) compared to that of gel alone (3.4 mN/mm2). Excellent dimensional stability and cell viability of the fluorescent microchip, along with its enhanced mechanical properties, proposes its potential applications in mechanobiology and understanding the impact of microstructure in cell studies.

Construction of Hybrid Bimetallic Uranyl Compounds Based on a Preassembled Terpyridine Metalloligand

Six hybrid uranyl-transition metal compounds [UO₂ Ni(cptpy)₂ (HCOO)₂ (DMF)(H₂ O)] (1), [UO₂ Ni(cptpy)₂ (BTPA)₂ ] (2), [UO₂ Fe(cptpy)₂ (HCOO)₂ (DMF)(H₂ O)] (3), [UO₂ Fe(cptpy)₂ (BTPA)₂ ] (4), [UO₂ Co(cptpy)₂ (HCOO)₂ (DMF)(H₂ O)] (5), and [UO₂ Co(cptpy)₂ (BTPA)₂ ] (6), based on bifunctional ligand 4'-(4-carboxyphenyl)-2,2':6',2''-terpyridine (Hcptpy) are reported (H₂ BTPA = 4,4'-biphenyldicarboxylic acid). Single-crystal XRD revealed that all six compounds feature similar metalloligands, which consist of two cptpy^- anions and one transition metal cation. The metalloligand M(cptpy)₂ can be considered to be an extended linear dicarboxylic ligand with length of 22.12 Å. Compounds 1, 3, and 5 are isomers, and all of them feature 1D chain structures. The adjacent 1D chains are connected together by hydrogen bonds and π-π interactions to form a 3D porous structure, which is filled with solvent molecules and can be exchanged with I₂ . Compounds 2, 4, and 6 are also isomers, and all of them feature 2D honeycomb (6,3) networks with hexagonal units of dimensions 41.91×26.89 Å, which are the largest among uranyl compounds with honeycomb networks. The large aperture allows two sets of equivalent networks to be entangled together to result in a 2D+2D→3D polycatenated framework. Remarkably, these uranyl compounds exhibit high catalytic activity for cycloaddition of carbon dioxide. Moreover, the geometric and electronic structures of compounds 1 and 2 are systematically discussed on the basis of DFT calculations.

Stimulus-responsive luminescent hydrogels: Design and applications

Luminescent hydrogels are emerging soft materials with applications in photoelectric, biomedicine, sensors and actuators, which are fabricated via covalently conjugation of luminophors to hydrogelators or physical loading of luminescent organic/inorganic materials into hydrogel matrices. Due to the intrinsic stimulus-responsiveness for hydrogels such as thermo-, pH, ionic strength, light and redox, luminescent hydrogels could respond to external physical or chemical stimuli through varying the luminescent properties such as colors, fluorescent intensity and so on, affording diverse application potential in addition to the pristine individual hydrogels or luminescent materials. Based on the rapid development of such area, here we systematically summarize and discuss the design protocols, properties as well as the applications of stimulus-responsive luminescent hydrogels. Because of the stimuli-responsiveness, biocompatibility, injectable and controllability of luminescent hydrogels, they are widely used as functional smart materials. We illustrate the applications of luminescent hydrogels. The future developments about luminescent hydrogels are also presented.

Research Progress Review of Preparation and Applications of Fluorescent Hydrogels

The fluorescent gel with good flexibility and biocompatibility has attracted more and more attention due to its excellent optical properties. In this paper, the research progresses in preparation methods and applications of fluorescent gels are reviewed. In addition, the preparation methods of self-assembly and polymerization of fluorescent gel are also introduced. In this paper, it should be noted that some outstanding research about the fluorescent gels used in sensors, bio-imaging probes, drug delivery, and other application fields is summarized. This work provides useful reference information for further exploration and study of fluorescent hydrogels.

Eu3+-Controlled Fluorescent Bilayer Vesicles

By appropriate substitution, polyoxometalates (POMs) can be modified to be organic-inorganic supramolecules (OISMs) that are nonaqueous or water soluble and form aggregates in solution. Here, we report a new OISM, (TBA)₃POM-PPCT, that can self-assemble to form bilayer vesicles controlled by Eu³⁺ in nonaqueous solution. Dynamic light scattering, transmission and scanning electron microscopy techniques, and atomic force microscopy clearly demonstrated the controllable formation of stable bilayer vesicles with an average hydrodynamic radius of about 510 nm. Because of the coordination between (TBA)₃POM-PPCT and Eu³⁺, the stable vesicles possess fluorescence, determined by studying fluorescence spectra, and show highly selective response to Cu²⁺, allowing them to function as an ion-detecting platform to Cu²⁺.

Hierarchical self-assembly of a fluorescence emission-enhanced organogelator and its multiple stimuli-responsive behaviors

A discrete hexagonal metallacycle 1 decorated with tetraphenylethylene, amide groups and long hydrophobic alkyl chains was constructed via [3 + 3] coordination-driven self-assembly, from which the fluorescence emission-enhanced organogelator with multiple stimuli-responsiveness was successfully prepared via hierarchical self-assembly.

Diarylethene-based xerogels: the fabrication of more entangled networks driven by isomerization and acidofluorochromism

The organogels were formed from fully-conjugated styrylbenzoxazoles and styrylbenzothiazoles without traditional gelation groups.

8-Aza-2'-deoxyisoguanosine Forms Fluorescent Hydrogels whereas 8-Aza-2'-deoxyguanosine Assembles into Nucleoside Nanotubes

Fluorescent hydrogels have attracted attention for applications in tissue engineering, drug delivery or as molecular machines. This study describes a nucleoside hydrogel formed by 8-aza-2'-deoxyisoguanosine (z⁸ isoG_d ). The new hydrogel is the first guanosine gel that has intrinsic fluorescence. It has long-term stability and a higher thermal stability (T_gel =77 °C) than gels of 2'-deoxyisoguanosine (T_gel =67 °C) and 2'-deoxyguanosine (T_gel =50 °C). Furthermore, the minimum gel concentration is lower at 0.3 mg per 100 μL for z⁸ isoG_d compared to 0.7 mg for 2'-deoxyisoguanosine. Scanning electron microscopy images show that the z⁸ isoG_d gel forms dense bundles of fibers. The related nucleoside 8-aza-2'-deoxyguanosine does not form a hydrogel but forms nanotube-like structures in the solid state. The fluorescence of the z⁸ isoG_d hydrogel responds to external stimuli such as the addition of alkali metal ions, pH change, heat, and UV irradiation. In binary mixtures with nucleoside shape mimics such as 7-deaza-2'-deoxyisoguanosine, the z⁸ isoG_d hydrogel disintegrates.

Increased duplex stabilization in porphyrin-LNA zipper arrays with structure dependent exciton coupling

Porphyrins were attached to LNA uridine building blocks via rigid 5-acetylene or more flexible propargyl-amide linkers and incorporated into DNA strands. The systems show a greatly increased thermodynamic stability when using as little as three porphyrins in a zipper arrangement. Thermodynamic analysis reveals clustering of the strands into more ordered duplexes with both greater negative ΔΔS and ΔΔH values, and less ordered duplexes with small positive ΔΔS differences, depending on the combination of linkers used. The exciton coupling between the porphyrins is dependent on the flanking DNA sequence in the single stranded form, and on the nature of the linker between the nucleobase and the porphyrin in the double stranded form; it is, however, also strongly influenced by intermolecular interactions. This system is suitable for the formation of stable helical chromophore arrays with sequence and structure dependent exciton coupling.

Supramolecular Hydrogelators and Hydrogels: From Soft Matter to Molecular Biomaterials

In this review we intend to provide a relatively comprehensive summary of the work of supramolecular hydrogelators after 2004 and to put emphasis particularly on the applications of supramolecular hydrogels/hydrogelators as molecular biomaterials. After a brief introduction of methods for generating supramolecular hydrogels, we discuss supramolecular hydrogelators on the basis of their categories, such as small organic molecules, coordination complexes, peptides, nucleobases, and saccharides. Following molecular design, we focus on various potential applications of supramolecular hydrogels as molecular biomaterials, classified by their applications in cell cultures, tissue engineering, cell behavior, imaging, and unique applications of hydrogelators. Particularly, we discuss the applications of supramolecular hydrogelators after they form supramolecular assemblies but prior to reaching the critical gelation concentration because this subject is less explored but may hold equally great promise for helping address fundamental questions about the mechanisms or the consequences of the self-assembly of molecules, including low molecular weight ones. Finally, we provide a perspective on supramolecular hydrogelators. We hope that this review will serve as an updated introduction and reference for researchers who are interested in exploring supramolecular hydrogelators as molecular biomaterials for addressing the societal needs at various frontiers.

Synthesis, structure and photophysical properties of a highly luminescent terpyridine-diphenylacetylene hybrid fluorophore and its metal complexes

A new fluorescent terpyridyl-diphenylacetylene hybrid fluorophore 4'-[4-{(4-methoxyphenyl)ethynyl}phenyl]-2,2':6',2''-terpyridine, L, was synthesized via Sonogashira cross-coupling of 4'-(4-bromophenyl)-2,2':6',2''-terpyridine and 4-ethynylanisole in the presence of Pd(PPh3)4/CuI as a catalyst. The solid state structure of L shows a trans arrangement of pyridine nitrogen atoms along the interannular bond in the terpyridine domain. Five transition metal complexes of L, {[FeL2](CF3SO3)2 (1), [ZnL2](ClO4)2 (2), [CdL2](ClO4)2 (3), [RuL2](PF6)2 (4), and PtMe3IL (5)}, have also been synthesized and characterized by spectroscopic methods and single crystal X-ray analysis. The X-ray crystal structures of complexes 1-3 show a distorted octahedral MN6 arrangement with tridentate coordination of the two terpyridine ligands, whereas in complex 5 the ligand L binds in a bidentate fashion. The ligand L displays bright blue emission in the solid state and in both non-polar and polar organic media. The fluorescence quantum yield of L is exceptionally high for a monoterpyridine ligand of its kind, which can be rationalized with density functional theory calculations. The electronic structure of L shows that the fluorescence involves intramolecular charge transfer from the diphenylacetylene moiety to the terpyridine group, and it is not affected by the usual non-radiative relaxation processes such as pyridine rotation. The Fe(II), Ru(II) and Pt(IV) complexes of L were found to be non-emissive, whereas both Zn(II) and Cd(II) complexes displayed significant green emission attributed to intra-ligand charge transfer states. These results were supported by the observed red-shift of the emission maxima of complexes 2 and 3 with increasing the solvent polarity.

Supramolecular hydrogels: synthesis, properties and their biomedical applications

As a novel class of three-dimensional (3D) hydrophilic cross-linked polymers, supramolecular hydrogels not only display unique physicochemical properties (e.g., water-retention ability, drug loading capacity, biodegradability and biocompatibility, biostability) as well as specific functionalities (e.g., optoelectronic properties, bioactivity, self-healing ability, shape memory ability), but also have the capability to undergo reversible gel-sol transition in response to various environmental stimuli inherent to the noncovalent cross-linkages, thereby showing great potential as promising biomaterial scaffolds for diagnosis and therapy. In this Review, we summarized the recent progress in the design and synthesis of supramolecular hydrogels through specific, directional noncovalent interactions, with particular emphasis on the structure-property relationship, as well as their wide-ranging applications in disease diagnosis and therapy including bioimaging, biodetection, therapeutic delivery, and tissue engineering. We believe that these current achievements in supramolecular hydrogels will greatly stimulate new ideas and inspire persistent efforts in this hot topic area in future.

Aqueous synthesis of stable and luminescent flexible non-covalently assembled europium(iii) complexes–organoclay films

Flexible, transparent and red-light-emitting luminescent polymer thin film derived from Eu(TTA)₃-doped hydrophilic hybrid material.

An emissive and pH switchable hydrazone-based hydrogel

The pH sensitivity of an emissive hydrazone-based gel can be used in monitoring the biogenic amines emanating from spoiled cod.

A Cu2+ specific metallohydrogel: preparation, multi-responsiveness and pillar[5]arene-induced morphology transformation

A Cu²⁺ specific metallohydrogel was constructed from a terpyridine-based low molecular weight ligand. The metallohydrogel showed multi-responsiveness and its morphology could be transformed by pillararene-based host–guest interaction.

A supramolecular hydrogel for generation of a benign DNA-hydrogel

A DNA-hydrogel, produced using calf-thymus DNA and a 2′,4′,6′-tri(4-pyridyl)pyridine based luminescent supramolecular hydrogel, can stabilize sunray mediated photochemically synthesized bio-compatible, luminous Ag-NPs.

Organogels formed by substituent-free pyrene-appended oligo(m-phenylene ethynylene)s

Substituent-free pyrene-appended m-phenylene ethynylene oligomers have been revealed to gelate organic solvents of low and modest polarity.

A polycation-induced secondary assembly of amphiphilic calixarene and its multi-stimuli responsive gelation behavior

A calixarene-based supramolecular hydrogel with reversible or irreversible gelation behaviors in response to external stimuli constructed via a hierarchical induced assembly strategy.

Fluorescent hydrogels with tunable nanostructure and viscoelasticity for formaldehyde removal

Hydrogels with ultrahigh water content, ∼99 wt %, and highly excellent mechanical strength were prepared by 4'-para-phenylcarboxyl-2,2':6',2″-terpyridine (PPCT) in KOH aqueous solution. The self-assembled structure, rheological properties, and the gel-sol transformation temperature (Tgel-sol) of PPCT/KOH hydrogels that depend on PPCT and KOH concentrations were studied, indicating easily controllable conditions for producing hydrogels in PPCT and KOH mixtures. An important finding was that the hydration radius (Rh) of cations (M(+) = Li(+), Na(+), K(+), Cs(+), NH4(+), (CH3)4N(+), (CH3CH2)4N(+), (CH3CH2CH2)4N(+), (CH3CH2CH2CH2)4N(+)) plays a vital role in gelation of PPCT/MOH systems. To produce hydrogels in PPCT/MOH systems, the Rh of M(+) must be in a suitable region of 3.29 to 3.58 Å, e.g., K(+), Na(+), Cs(+), and the capability of M(+) for inducing PPCT to form hydrogels is K(+) > Na(+) > Li(+), which is followed by the Hofmeister series. The hydrogels of PPCT and KOH mixtures are responsive to external stimuli including temperature and shearing force, and present gelation-induced enhanced fluorescence emission property. The states of being sensitive to the stimuli can readily recover to the original hydrogels, which are envisaged to be an attracting candidate to produce self-healing materials. A typical function of the hydrogels of PPCT and KOH mixtures is that formaldehyde (HCHO) can speedily be adsorbed via electrostatic interaction and converted into nontoxic salts (HCOOK and CH3OK), making it a promising candidate material for HCHO removal in home furnishings to reduce indoor environmental pollutants.

Synthesis and characterization of copper(II) 4'-phenyl-terpyridine compounds and catalytic application for aerobic oxidation of benzylic alcohols

The reactions between 4'-phenyl-terpyridine (L) and nitrate, acetate or chloride Cu(II) salts led to the formation of [Cu(NO3)2L] (1), [Cu(OCOCH3)2L]·CH2Cl2 (2·CH2Cl2) and [CuCl2L]·[Cu(Cl)(μ-Cl)L]2 (3), respectively. Upon dissolving 1 in mixtures of DMSO-MeOH or EtOH-DMF the compounds [Cu(H2O){OS(CH3)2}L](NO3)2 (4) and [Cu(HO)(CH3CH2OH)L](NO3) (5) were obtained, in this order. Reaction of 3 with AgSO3CF3 led to [CuCl(OSO2CF3)L] (6). The compounds were characterized by ESI-MS, IR, elemental analysis, electrochemical techniques and, for 2-6, also by single crystal X-ray diffraction. They undergo, by cyclic voltammetry, two single-electron irreversible reductions assigned to Cu(II) → Cu(I) and Cu(I) → Cu(0) and, for those of the same structural type, the reduction potential appears to correlate with the summation of the values of the Lever electrochemical EL ligand parameter, which is reported for the first time for copper complexes. Complexes 1-6 in combination with TEMPO (2,2,6,6-tetramethylpiperidinyl-1-oxyl radical) can exhibit a high catalytic activity, under mild conditions and in alkaline aqueous solution, for the aerobic oxidation of benzylic alcohols. Molar yields up to 94% (based on the alcohol) with TON values up to 320 were achieved after 22 h.

Emission enhancement of a coplanar π-conjugated gelator without any auxiliary substituents

A linear coplanar carbazole-based benzoxazole derivative without any auxiliary moieties could gelatinize organic solvents, and exhibited emission enhancement owing to the J-aggregate formation.

Transition metal ion induced hydrogelation by amino-terpyridine ligands

Hydrogelation behavior of a new class of terpyridine based metallogelators are explored. The gelation and the gel morphology was found to be critically dependent on divalent metal ions, anions and on subtle structural changes on the gelator molecule.

A highly selective, Hg2+ triggered hydrogelation: modulation of morphology by chemical stimuli

The morphology of a supramolecular hydrogel based on 4′-[4-(4-aminophenyl)phenyl]-2,2′:6′,2′′-terpyridine, exclusively with Hg²⁺, can be tuned by external chemical stimuli.