Recombinant Esterase (BaCEm) Immobilized on Polyethyleneimine-Impregnated Mesoporous Silica SBA-15 Exhibits Outstanding Catalytic Performance

A recombinant esterase, BaCEm, derived from Bacillus aryabhattai and heterologously expressed in Escherichia coli, was successfully immobilized on polyethyleneimine-impregnated mesoporous silica SBA-15. This immobilization utilized glutaraldehyde as a crosslinker. Optimal conditions were established with a PEI/SBA-15 ratio of 25% (w/w), a pH of 7.5, and a glutaraldehyde concentration of 0.5% (w/w), resulting in a loading capacity of 76.4 mg/g, a recovery activity of 43.5%, and a specific activity of 7917 U/g for BaCEm. The immobilized BaCEm demonstrated high enantioselectivity, with an "E" value of 203.92, in the resolution assay of (R,S)-ethyl indoline-2-carboxylate. Notably, the immobilized enzyme, compared to its free counterpart, exhibited enhanced thermostability, maintaining 95.4% of its activity after 3 h at 30 °C. It also showed significant tolerance to organic solvents, retaining 48.4% and 28.7% residual activity in 10% v/v acetonitrile and acetone, respectively. Moreover, its storage stability was confirmed, with 68.5% residual activity preserved after 30 days at 4 °C. Remarkably, the immobilized BaCEm retained 58.1% of its activity after 10 reuse cycles, underscoring the potential of polyethyleneimine-impregnated mesoporous silica SBA-15 as an effective support for enzyme immobilization, promising for industrial applications.

An antifouling epoxy coated metal surface containing silica-immobilized carbonic anhydrase supraparticles for CO2 capture through microalgae

Carbonic anhydrase (CA) has a promising application as a green and efficient biocatalyst for CO2 capture, and many successful cases of immobilizing CA have been reported. However, CA antifouling coatings on metal for CO2 sequestration have rarely been reported. Herein, dimeric CA from Sulfurihydrogenibium azorense (SazCA) with a ferritin tag, which was prepared by low-speed centrifugation with high yield, was adopted as a free enzyme and encapsulated in the sol-gel silica. The silica-immobilized CAs were dispersed into the commercialized metal-antifouling epoxy resin paint to obtain CA coated nickel foams, which had excellent stability, with 90 % and 67 % residual activity after 28 days of incubation at 30 °C and 60 °C, respectively. The CA coated nickel foams remained 60 % original activity after 6 cycles of use within 28 days. Then, a CA-microalgae carbon capture device was constructed using the CA coated nickel foams and Chlorella. The growth rate of Chlorella was significantly increased and the biomass of Chlorella increased by 29 % compared with control after 7 days of incubation. Due to the simple and cost-effective preparation process, sustainable and efficient CO2 absorption, this easy-to-scale up CA coated nickel foam has great potential in CA assisted microalgae-based CO2 capture and carbon neutrality.

Electrostatically Mediated In Situ Polymerization for Enzyme Immobilization and Activation

Enzyme immobilization in nanoparticles is of interest for boosting their catalytic applications, yet rational approaches to designs achieving both high enzyme loading and activation remain a challenge. Herein, we report an electrostatically mediated in situ polymerization strategy that simultaneously realizes enzyme immobilization and activation. This was achieved by copolymerizing cationic monomers with a cross-linker in the presence of the enzyme lipase (anionic) as the template, which produces enzyme-loaded nanogels. The effects of different control factors such as pH, lipase dosage, and cross-linker fraction on nanogel formation are investigated systematically, and optimal conditions for enzyme loading and activation have been determined. A central finding is that the cationic polymer network of the nanogel creates a favorable environment that not only protects the enzyme but also boosts enzymatic activity nearly 2-fold as compared to free lipase. The nanogels improve the stability of the lipase to tolerate a broader working range of pH (5.5-8.5) and temperature (25-70 °C) and allow recycling such that after six cycles of reaction, 70% of the initial activity is conserved. The established fabrication strategy can be applied generally to different cationic monomers, and most of these nanogels exhibit adequate immobilization and activation of lipase. Our study confirms that in situ polymerization based on electrostatic interaction provides a facile and robust strategy for enzyme immobilization and activation. The wide variety of ionic monomers, therefore, features great potential for developing functional platforms toward satisfying enzyme immobilization and demanding applications.

Green synthesis of silica-coated magnetic nanocarriers for simultaneous purification-immobilization of β-1,3-xylanase

Tailoring magnetic nanocarriers with tunable properties is of great significance for the development of multifunctional candidate materials in numerous fields. Herein, we report a one-pot biomimetic silicification-based method for the synthesis of silica-coated magnetic nanoparticles. The synthesis process was mild, low cost, and highly efficient, which took only about 21 min compared with 4.5-120 h in other literature. Then, the carriers had been characterized by VSM, SEM, TEM, XRD, FT-IR, and EDS to confirm their function. To evaluate the usefulness of the carriers, they were adopted to couple the purification and immobilization of β-1,3-xylanase from the cell lysate in a single step with high immobilization yield (92.8 %) and high activity recovery (82.4 %). The immobilized enzyme also retained 58.4 % of the initial activity after 10 cycles and displayed good storage properties, and improved thermal stability, which would be promising in algae biomass bioconversion as well as other diverse applications.

Biomimetic one-pot preparation of surface biofunctionalized silica-coated magnetic composites for dual enzyme oriented immobilization without pre-purification

Surface functioned magnetic silica particles are efficient carriers to achieve facilitated separation and recycling of biocatalysts. However, traditional methods of modifying magnetic silica particles required time-costly sequential coating and surface modification steps and toxic solvents. Herein, a green and efficient routine was proposed to prepare the surface modified silica-coated magnetic microspheres (SCEs@SiO₂ @Fe₃O₄) in one-pot. The elastin-like polypeptides (ELPs)-SpyCatcher chimera (SCEs) were purified by inverse transition cycling with high yield (275 mg/L) and incorporated into the magnetic silica spheres based on the biomimetic silicification capability of ELPs as proved by the EDS and SEM mapping. No SCEs leaked was observed within 48 h, indicating excellent stability in buffer. Then, the biofunctionalized carriers were used to purify and immobilize the target dual enzymes (xylanase-linker-SpyTag-linker-lichenase, bienzymes) directly from the crude cell lysis solution by the spontaneous isopeptide bond reaction between SpyCatcher and SpyTag. The immobilized bienzymes were sphere-like magnetic silica particles with uniform size, which had good magnetic responsiveness. The immobilization yield, immobilization efficiency and activity recovery for xylanase were 86%, 84 % and 72 %, while for lichenase was 92 %, 86 % and 79 %, respectively. Besides, the immobilized bienzymes showed good reusability (>60 %, 10 times for xylanase, >95 %, 8 times for lichenase). The SCEs modified silica-coated magnetic microspheres are expected to provide versatile platforms for single-step of purification and immobilization of multienzymes, offering great potentials in the field of biocatalysis.

Recent Progress in the Production of Cyanide-Converting Nitrilases—Comparison with Nitrile-Hydrolyzing Enzymes

Nitrilases have a high potential for application in organic chemistry, environmental technology, and analytics. However, their industrial uses require that they are produced in highly active and robust forms at a reasonable cost. Some organic syntheses catalyzed by nitrilases have already reached a high level of technological readiness. This has been enabled by the large-scale production of recombinant catalysts. Despite some promising small-scale methods being proposed, the production of cyanide-converting nitrilases (cyanide hydratase and cyanide dihydratase) is lagging in this regard. This review focuses on the prospects of cyanide(di)hydratase-based catalysts. The current knowledge of these enzymes is summarized and discussed in terms of the origin and distribution of their sequences, gene expression, structure, assays, purification, immobilization, and uses. Progresses in the production of other nitrilase catalysts are also tackled, as it may inspire the development of the preparation processes of cyanide(di)hydratases.

A versatile tag for simple preparation of cutinase towards enhanced biodegradation of polyethylene terephthalate

Enzymatic degradation of polyethylene terephthalate (PET) suffered from challenges such as complex and costly enzyme preparation, difficult access to PET substrates, poor reusability of free enzymes and sometimes MHET inhibitions. Herein, we propose an "all-in-one" strategy to address these issues with a well-designed elastin-like polypeptides (ELPs) tag. The preparation of the ELPs-tagged cutinase (ET-C) was efficient and easy to scale up by centrifugation, with an activity recovery of 57.55 % and a yield of 160 mg/L. Besides, the activity of the ET-C was 1.3 and 1.66-fold higher in degrading PET micro- and macro-plastics compared to wild-type cutinase. The self-immobilized cutinase (ET-C@SiO₂) obtained by the ELPs-mediated biosilicification exhibited high loading capacity, activity, and thermostability and maintained 77.65 % of the original activity after 10 reuses. Interestingly, the product of the ET-C was TPA, whereas the wild-type was TPA and MHET. This is a simple way to release the intermediates inhibition compared with the existing methods. Our results demonstrated the feasibility of the versatile ELPs tag, which will pave an alternative economic way for scalable PET biodegradation.

Carbonic anhydrase to boost CO2 sequestration: Improving carbon capture utilization and storage (CCUS)

CO₂ Capture Utilization and Storage (CCUS) is a fundamental strategy to mitigate climate change, and carbon sequestration, through absorption, can be one of the solutions to achieving this goal. In nature, carbonic anhydrase (CA) catalyzes the CO₂ hydration to bicarbonates. Targeting the development of novel biotechnological routes which can compete with traditional CO₂ absorption methods, CA utilization has presented a potential to expand as a promising catalyst for CCUS applications. Driven by this feature, the search for novel CAs as biocatalysts and the utilization of enzyme improvement techniques, such as protein engineering and immobilization methods, has resulted in suitable variants able to catalyze CO₂ absorption at relevant industrial conditions. Limitations related to enzyme recovery and recyclability are still a concern in the field, affecting cost efficiency. Under different absorption approaches, CA enhances both kinetics and CO₂ absorption yields, besides reduced energy consumption. However, efforts directed to process optimization and demonstrative plants are still limited. A recent topic with great potential for development is the CA utilization in accelerated weathering, where industrial residues could be re-purposed towards becoming carbon sequestrating agents. Furthermore, research of new solvents has identified potential candidates for integration with CA in CO₂ capture, and through techno-economic assessments, CA can be a path to increase the competitiveness of alternative CO₂ absorption systems, offering lower environmental costs. This review provides a favorable scenario combining the enzyme and CO₂ capture, with possibilities in reaching an industrial-like stage in the future.

Facile Cellulase Immobilisation on Bioinspired Silica

Cellulases are enzymes with great potential for converting biomass to biofuels for sustainable energy. However, their commercial use is limited by their costs and low reusability. Therefore, the scientific and industrial sectors are focusing on finding better strategies to reuse enzymes and improve their performance. In this work, cellulase from Aspergillus niger was immobilised through in situ entrapment and adsorption on bio-inspired silica (BIS) supports. To the best of our knowledge, this green effect strategy has never been applied for cellulase into BIS. In situ entrapment was performed during support synthesis, applying a one-pot approach at mild conditions (room temperature, pH 7, and water solvent), while adsorption was performed after support formation. The loading efficiency was investigated on different immobilisation systems by Bradford assay and FTIR. Bovine serum albumin (BSA) was chosen as a control to optimize cellulase loading. The residual activity of cellulase was analysed by the dinitro salicylic acid (DNS) method. Activity of 90% was observed for the entrapped enzyme, while activity of ~55% was observed for the adsorbed enzyme. Moreover, the supported enzyme systems were recycled five times to evaluate their reuse potential. The thermal and pH stability tests suggested that both entrapment and adsorption strategies can increase enzyme activity. The results highlight that the entrapment in BIS is a potentially useful strategy to easily immobilise enzymes, while preserving their stability and recycle potential.

Amino Acid-Mediated Synthesis of the ZIF-8 Nanozyme That Reproduces Both the Zinc-Coordinated Active Center and Hydrophobic Pocket of Natural Carbonic Anhydrase

The zeolitic imidazolate framework-8 (ZIF-8) nanozyme has been synthesized using hydrophobic amino acid (AA) to regulate crystal growth. The as-synthesized ZIF-8 reproduces both the structural and functional properties of natural carbonic anhydrase (CA). Structurally, Zn²⁺/2-methylimidazole coordinated units mimic very well the active center of CA while the hydrophobic microdomains of the adsorbed AA simulate the CA hydrophobic pocket. Functionally, the nanozymes show excellent CA-like esterase activity by giving specific enzyme activity of 0.22 U mg^-1 at 25 °C in the case of Val-ZIF-8. More strikingly, such nanozymes are superior to natural CA by having excellent hydrothermal stability, which can give highly enhanced esterase activity with increasing temperature. The specific enzyme activity of Val-ZIF-8 at 80 °C is about 25 times higher than that at 25 °C. In addition, AA-ZIF-8 also shows an excellent catalytic efficiency toward carbon dioxide (CO₂) hydration. This study puts forward the important role of hydrophobic microdomains in biomimetic nanozymes for the first time and develops a facile and mild method for the synthesis of nanozymes with controlled morphology and size to achieve excellent catalytic efficiency.

Entrapment of the Fastest Known Carbonic Anhydrase with Biomimetic Silica and Its Application for CO2 Sequestration

Capturing and storing CO₂ is of prime importance. The rate of CO₂ sequestration is often limited by the hydration of CO₂, which can be greatly accelerated by using carbonic anhydrase (CA, EC 4.2.1.1) as a catalyst. In order to improve the stability and reusability of CA, a silica-condensing peptide (R5) was fused with the fastest known CA from Sulfurihydrogenibium azorense (SazCA) to form R5-SazCA; the fusion protein successfully performed in vitro silicification. The entrapment efficiency reached 100% and the silicified form (R5-SazCA-SP) showed a high activity recovery of 91%. The residual activity of R5-SazCA-SP was two-fold higher than that of the free form when stored at 25 °C for 35 days; R5-SazCA-SP still retained 86% of its activity after 10 cycles of reuse. Comparing with an uncatalyzed reaction, the time required for the onset of CaCO₃ formation was shortened by 43% and 33% with the addition of R5-SazCA and R5-SazCA-SP, respectively. R5-SazCA-SP shows great potential as a robust and efficient biocatalyst for CO₂ sequestration because of its high activity, high stability, and reusability.

Enzymes for Efficient CO2 Conversion

The accumulation of carbon dioxide in the atmosphere as a result of human activities has caused a number of adverse circumstances in the world. For this reason, the proposed solutions lie within the aim of reducing carbon dioxide emissions have been quite valuable. However, as the human activity continues to increase on this planet, the possibility of reducing carbon dioxide emissions decreases with the use of conventional methods. The emergence of compounds than can be used in different fields by converting the released carbon dioxide into different chemicals will construct a fundamental solution to the problem. Although electro-catalysis or photolithography methods have emerged for this purpose, they have not been able to achieve successful results. Alternatively, another proposed solution are enzyme based systems. Among the enzyme-based systems, pyruvate decarboxylase, carbonic anhydrase and dehydrogenases have been the most studied enzymes. Pyruvate dehydrogenase and carbonic anhydrase have either been an expensive method or were incapable of producing the desired result due to the reaction cascade they catalyze. However, the studies reporting the production of industrial chemicals from carbon dioxide using dehydrogenases and in particular, the formate dehydrogenase enzyme, have been remarkable. Moreover, reported studies have shown the existence of more active and stable enzymes, especially the dehydrogenase family that can be identified from the biome. In addition to this, their redesign through protein engineering can have an immense contribution to the increased use of enzyme-based methods in CO₂ reduction, resulting in an enormous expansion of the industrial capacity.

Enzymatic characteristics of immobilized carbonic anhydrase and its applications in CO2 conversion

Native carbonic anhydrase (CA) has been widely used in several different applications due to its catalytic function in the interconversion of carbon dioxide (CO₂) and carbonic acid. However, subject to its stability and recyclability, native CA often deactivates when in harsh environments, which restricts its applications in the commercial market. Maintaining the stability and high catalytic activity of CA is challenging. Immobilization provides an effective route that can improve enzymatic stability. Through the interaction of covalent bonds and van der Waals forces, water-soluble CA can be combined with various insoluble supports to form water-insoluble immobilized CA so that CA stability and utilization can be greatly improved. However, if the immobilization method or immobilization condition is not suitable, it often leads to a decrease in CA activity, reducing the application effects on CO₂ conversion. In this review, we discuss existing immobilization methods and applications of immobilized CA in the environmental field, such as the mineralization of carbon dioxide and multienzyme cascade catalysis based on CA. Additionally, prospects in current development are outlined. Because of the many outstanding and superior properties after immobilization, CA is likely to be used in a wide variety of scientific and technical areas in the future.

A novel all-in-one strategy for purification and immobilization of β-1,3-xylanase directly from cell lysate as active and recyclable nanobiocatalyst

BACKGROUND

Exploring a simple and versatile technique for direct immobilization of target enzymes from cell lysate without prior purification is urgently needed. Thus, a novel all-in-one strategy for purification and immobilization of β-1,3-xylanase was proposed, the target enzymes were covalently immobilized on silica nanoparticles via elastin-like polypeptides (ELPs)-based biomimetic silicification and SpyTag/SpyCatcher spontaneous reaction. Thus, the functional carriers that did not require the time-consuming surface modification step were quickly and efficiently prepared. These carriers could specifically immobilize the SpyTag-fused target enzymes from the cell lysate without pre-purification.

RESULTS

The ELPs-SpyCatcher hardly leaked from the carriers (0.5%), and the immobilization yield of enzyme was up to 96%. Immobilized enzyme retained 85.6% of the initial activity and showed 88.6% of the activity recovery. Compared with free ones, the immobilized β-1,3-xylanase showed improved thermal stability, elevated storage stability and good pH tolerance. It also retained more than 70.6% of initial activity after 12 reaction cycles, demonstrating its excellent reusability.

CONCLUSIONS

The results clearly highlighted the effectiveness of the novel enzyme immobilization method proposed here due to the improvement of overall performance of immobilized enzyme in respect to free form for the hydrolysis of macromolecular substrates. Thus, it may have great potential in the conversion of algae biomass as well as other related fields.

Programmable stimuli-responsive polypeptides for biomimetic synthesis of silica nanocomposites and enzyme self-immobilization

Bioinspired silicification is an attractive route for achieving unique silica nanocomposites. Herein, a novel, facile and inexpensive route for biosilica synthesis is developed using the stimuli-responsive elastin-like polypeptide (ELP). The ELP is precisely tailored to a silica-mineralizing peptide by programming it with lysine residues. The resulting cationic ELP[KV₈F-40] is purified in ultrahigh yield using a chromatography-free ITC purification technique based on thermal-responsive property. Excitingly, the specific activity of ELP is 40-fold higher than that of silaffin. Besides, efficient and strong entrapment of ELP is achieved with over 98% of immobilization yield and less than 2% of leakage. These imply that cationic ELP may be used as a bifunctional tag (purification and immobilization) for fusion protein. An enzyme (xylanase) is therefore chosen to genetically fuse to ELP. The ELP-fused xylanase is purified by ELP with high purity (~98%) and enables the rapid (within minutes) self-immobilization. The immobilization yield was greater than 95%, and the immobilized xylanases hardly leaked from the silica matrix, demonstrating high efficiency of the self-immobilization process. The strategy developed here may provide a new opportunity for fabricating functional silica nanocomposites in a feasible and inexpensive pathway, which will have great potentials in the field of biotechnology.

Novel bovine carbonic anhydrase encapsulated in a metal–organic framework: a new platform for biomimetic sequestration of CO2

In this work, maximizing the utilization of CO₂ and its precipitation as CaCO₃ by using immobilized bovine carbonic anhydrase (BCA) was evaluated. In this way, selection of suitable carriers which have a gas adsorption function would enhance the CO₂ sequestration efficiency of the carbonic anhydrase (CA). So a metal–organic framework (MOF), an excellent material for gas adsorption and enzyme immobilization was used. In this manner, BCA was encapsulated into the microporous zeolite imidazolate framework, ZIF-8, for the first time, using a bottle-around-a-ship method. Systematic characterization including powder X-ray diffraction (PXRD), UV-vis, and Fourier transform infrared (FT-IR) spectroscopies, BET, field emission scanning electron microscopy (FE-SEM) and energy dispersive X-ray (EDX) confirmed that the entrapment of BCA molecules was successfully achieved during the crystal growth of ZIF-8 with an enzyme loading of ca. 100 ± 1.2 mg g⁻¹ of BCA–ZIF-8. Optimization of the matrix for increasing the stability of the enzyme in an encapsulated form is the main aim of the present study. The de novo approach was proposed because this method provides better enzyme protection from degradation, minimizes enzyme leaching and enables multiple reuse. Then, the influence of different parameters, including pH, temperature, storage and reusability, was evaluated for enzyme@MOF composites versus free enzymes. The prepared biocatalyst exhibited outstanding activity in a wide pH and temperature range and demonstrates high storage stability up to 37 days. This efficient and simple association procedure seems well-adapted to produce an enzymatic bio-catalyst for biocatalytic hydration of CO₂. The FT-IR analysis revealed that the structure of BCA was well maintained during the encapsulation process. The thermal stability and reusability of the BCA–ZIF-8 increased noticeably due to the structural rigidity and confinement of the ZIF-8 scaffolds. These two parameters are very important for practical applications.

A novel heterogeneous bio-catalyst was developed for CO₂ capture by encapsulating bovine carbonic anhydrase into ZIF-8.

Immobilized carbonic anhydrase: preparation, characteristics and biotechnological applications

Carbonic anhydrase (CA) is an essential metalloenzyme in living systems for accelerating the hydration and dehydration of carbon dioxide. CA-catalyzed reactions can be applied in vitro for capturing industrially emitted gaseous carbon dioxide in aqueous solutions. To facilitate this type of practical application, the immobilization of CA on or inside solid or soft support materials is of great importance because the immobilization of enzymes in general offers the opportunity for enzyme recycling or long-term use in bioreactors. Moreover, the thermal/storage stability and reactivity of immobilized CA can be modulated through the physicochemical nature and structural characteristics of the support material used. This review focuses on (i) immobilization methods which have been applied so far, (ii) some of the characteristic features of immobilized forms of CA, and (iii) biotechnological applications of immobilized CA. The applications described not only include the CA-assisted capturing and sequestration of carbon dioxide, but also the CA-supported bioelectrochemical conversion of CO₂ into organic molecules, and the detection of clinically important CA inhibitors. Furthermore, immobilized CA can be used in biomimetic materials synthesis involving cascade reactions, e.g. for bone regeneration based on calcium carbonate formation from urea with two consecutive reactions catalyzed by urease and CA.

Immobilization of Carbonic Anhydrase in Glass Micropipettes and Glass Fiber Filters for Flow-Through Reactor Applications

There are various ways of immobilizing carbonic anhydrase (CA) on solid materials. One of the final aims is to apply immobilized CA for the catalytic hydration of carbon dioxide (CO₂) as a first step in the conversion of gaseous CO₂ into solid products. The immobilization method investigated allows a straightforward, stable, and quantifiable immobilization of bovine erythrocyte carbonic anhydrase (BCA) on silicate surfaces. The method is based on the use of a water-soluble, polycationic second-generation dendronized polymer with on average 1000 repeating units, abbreviated as de-PG2₁₀₀₀. Several copies of BCA were first covalently linked to de-PG2₁₀₀₀ through stable bisaryl hydrazone (BAH) bonds. Then, the de-PG2₁₀₀₀-BAH-BCA conjugates obtained were adsorbed noncovalently either on microscopy glass coverslips, inside glass micropipettes, or in porous glass fiber filters. The apparent density of the immobilized BCA on the glass surfaces was about 8-10 pmol/cm². In all three cases, the immobilized enzyme was highly active and stable when tested with p-nitrophenyl acetate as a model enzyme substrate at room temperature. The micropipettes and the glass fiber filters were applied as flow-through systems for continuous operation at room temperature. In the case of the glass fiber filters, the filters were placed inside a homemade flow-through filter holder which allows flow-through runs with more than one filter connected in series. This offers the opportunity of increasing the substrate conversion by increasing the number of BCA-containing filters.

Preparation of Functional Silica Using a Bioinspired Method

The goal of the protocols described herein is to synthesize bioinspired silica materials, perform enzyme encapsulation therein, and partially or totally purify the same by acid elution. By combining sodium silicate with a polyfunctional bioinspired additive, silica is rapidly formed at ambient conditions upon neutralization. The effect of neutralization rate and biomolecule addition point on silica yield are investigated, and biomolecule immobilization efficiency is reported for varying addition point. In contrast to other porous silica synthesis methods, it is shown that the mild conditions required for bioinspired silica synthesis are fully compatible with the encapsulation of delicate biomolecules. Additionally, mild conditions are used across all synthesis and modification steps, making bioinspired silica a promising target for the scale-up and commercialization as both a bare material and active support medium. The synthesis is shown to be highly sensitive to conditions, i.e., the neutralization rate and final synthesis pH, however tight control over these parameters is demonstrated through the use of auto titration methods, leading to high reproducibility in reaction progression pathway and yield. Therefore, bioinspired silica is an excellent active material support choice, showing versatility towards many current applications, not limited to those demonstrated here, and potency in future applications.

Novel MgO/hollow carbon sphere composites for CO2 adsorption

MgO/hollow carbon sphere composites with enhanced CO₂ uptake capacity and recyclability have been synthesized through a one-pot self-assembly approach.

Enzyme Shielding in a Large Mesoporous Hollow Silica Shell for Improved Recycling and Stability Based on CaCO3 Microtemplates and Biomimetic Silicification

We report a novel "anchor-shield" approach for synthesizing a yolk-shell-structured biocatalytic system that consists of a phenylalanine ammonia lyase (PAL) protein particle core and a hollow silica shell with large mesopores by a combination of CaCO₃ microtemplates and biomimetic silicification. The method is established upon filling porous CaCO₃ cores with PAL via co-precipitation, controlled self-assembly and polycondensation of silanes, cross-link of the PAL molecules, and subsequent CaCO₃ dissolution. During this process, the self-assembled layer of cetyltrimethylammonium bromide served as a structure-directing agent of the mesostructure and directed the overgrowth of the mesostructured silica on the external surface of PAL/CaCO₃ hybrid microspheres; after CaCO₃ dissolution, the cross-linked PAL particles were encapsulated in the hollow silica shell. The hollow silica shell around the enzyme particles provided a "shield" to protect from biological, thermal, and chemical degradation for the enzyme. As a result, the recycling of the PAL enzyme was improved remarkably in comparison to adsorbed PAL on CaCO₃. PAL particles with a hollow silica shell still retained 60% of their original activity after 13 cycles, whereas adsorbed PAL on CaCO₃ microparticles lost activity after 7 cycles. Moreover, immobilized PAL exhibited higher stability against a proteolytic agent, denaturants, heat, and extreme pH than adsorbed PAL on CaCO₃ microparticles. These results demonstrated that the "anchor-shield" approach is an efficient method to obtain a stable and recycled biocatalyst with a yolk-shell structure.

Carbon dioxide capture strategies from flue gas using microalgae: a review

Global warming and pollution are the twin crises experienced globally. Biological offset of these crises are gaining importance because of its zero waste production and the ability of the organisms to thrive under extreme or polluted condition. In this context, this review highlights the recent developments in carbon dioxide (CO2) capture from flue gas using microalgae and finding the best microalgal remediation strategy through contrast and comparison of different strategies. Different flue gas microalgal remediation strategies discussed are as follows: (i) Flue gas to CO2 gas segregation using adsorbents for microalgal mitigation, (ii) CO2 separation from flue gas using absorbents and later regeneration for microalgal mitigation, (iii) Flue gas to liquid conversion for direct microalgal mitigation, and (iv) direct flue gas mitigation using microalgae. This work also studies the economic feasibility of microalgal production. The study discloses that the direct convening of flue gas with high carbon dioxide content, into microalgal system is cost-effective.

Mesoporous CLEAs-silica composite microparticles with high activity and enhanced stability

A novel enzyme immobilization approach was used to generate mesoporous enzymes-silica composite microparticles by co-entrapping gelatinized starch and cross-linked phenylalanine ammonia lyase (PAL) aggregates (CLEAs) containing gelatinized starch into biomemitic silica and subsequently removing the starch by α-amylase treatment. During the preparation process, the gelatinzed starch served as a pore-forming agent to create pores in CLEAs and biomimetic silica. The resulting mesoporous CLEAs-silica composite microparticles exhibited higher activity and stability than native PAL, conventional CLEAs, and PAL encapsulated in biomimetic silica. Furthermore, the mesoporous CLEAs-silica composite microparticles displayed good reusability due to its suitable size and mechanical properties, and had excellent stability for storage. The superior catalytic performances were attributed to the combinational unique structure from the intra-cross-linking among enzyme aggregates and hard mesoporous silica shell, which not only decreased the enzyme-support negative interaction and mass-transfer limitations, but also improved the mechanical properties and monodispersity. This approach will be highly beneficial for preparing various bioactive mesoporous composites with excellent catalytic performance.

Silaffins in Silica Biomineralization and Biomimetic Silica Precipitation

Biomineralization processes leading to complex solid structures of inorganic material in biological systems are constantly gaining attention in biotechnology and biomedical research. An outstanding example for biomineral morphogenesis is the formation of highly elaborate, nano-patterned silica shells by diatoms. Among the organic macromolecules that have been closely linked to the tightly controlled precipitation of silica in diatoms, silaffins play an extraordinary role. These peptides typically occur as complex posttranslationally modified variants and are directly involved in the silica deposition process in diatoms. However, even in vitro silaffin-based peptides alone, with and without posttranslational modifications, can efficiently mediate biomimetic silica precipitation leading to silica material with different properties as well as with encapsulated cargo molecules of a large size range. In this review, the biomineralization process of silica in diatoms is summarized with a specific focus on silaffins and their in vitro silica precipitation properties. Applications in the area of bio- and nanotechnology as well as in diagnostics and therapy are discussed.

Enzymatic conversion of carbon dioxide

With the continuous increase in fossil fuels consumption and the rapid growth of atmospheric CO2 concentration, the harmonious state between human and nature faces severe challenges. Exploring green and sustainable energy resources and devising efficient methods for CO2 capture, sequestration and utilization are urgently required. Converting CO2 into fuels/chemicals/materials as an indispensable element for CO2 capture, sequestration and utilization may offer a win-win strategy to both decrease the CO2 concentration and achieve the efficient exploitation of carbon resources. Among the current major methods (including chemical, photochemical, electrochemical and enzymatic methods), the enzymatic method, which is inspired by the CO2 metabolic process in cells, offers a green and potent alternative for efficient CO2 conversion due to its superior stereo-specificity and region/chemo-selectivity. Thus, in this tutorial review, we firstly provide a brief background about enzymatic conversion for CO2 capture, sequestration and utilization. Next, we depict six major routes of the CO2 metabolic process in cells, which are taken as the inspiration source for the construction of enzymatic systems in vitro. Next, we focus on the state-of-the-art routes for the catalytic conversion of CO2 by a single enzyme system and by a multienzyme system. Some emerging approaches and materials utilized for constructing single-enzyme/multienzyme systems to enhance the catalytic activity/stability will be highlighted. Finally, a summary about the current advances and the future perspectives of the enzymatic conversion of CO2 will be presented.

Stabilization of Phenylalanine Ammonia Lyase from Rhodotorula glutinis by Encapsulation in Polyethyleneimine-Mediated Biomimetic Silica

Phenylalanine ammonia lyase (PAL) from Rhodotorula glutinis was encapsulated within polyethyleneimine-mediated biomimetic silica. The main factors in the preparation of biomimetic silica were optimized by response surface methodology (RSM). Compared to free PAL (about 2 U), the encapsulated PAL retained more than 43 % of their initial activity after 1 h of incubation time at 60 °C, whereas free PAL lost most of activity in the same conditions. It was clearly indicated that the thermal stability of PAL was improved by encapsulation. Moreover, the encapsulated PAL exhibited the excellent stability of the enzyme against denaturants and storage stability, and pH stability was improved by encapsulation. Operational stability of 7 reaction cycles showed that the encapsulated PAL was stable. Nevertheless, the K m value of encapsulated PAL in biomimetic silica was higher than that of the free PAL due to lower total surface area and increased mass transfer resistance.

Tethering of nicotinamide adenine dinucleotide inside hollow nanofibers for high-yield synthesis of methanol from carbon dioxide catalyzed by coencapsulated multienzymes

Enzymatic conversion of carbon dioxide (CO2) to fuel or chemicals is appealing, but is limited by lack of efficient technology for regeneration and reuse of expensive cofactors. Here we show that cationic polyelectrolyte-doped hollow nanofibers, which can be fabricated via a facile coaxial electrospinning technology, provide an ideal scaffold for assembly of cofactor and multienzymes capable of synthesizing methanol from CO2 through a cascade multistep reaction involving cofactor regeneration. Cofactor and four enzymes including formate, formaldehyde, alcohol, and glutamate dehydrogenases were in situ coencapsulated inside the lumen of hollow nanofibers by involving them in the core-phase solution for coaxial electrospinning, in which cationic polyelectrolyte was predissolved. The polyelectrolyte penetrating across the shell of the hollow nanofibers enabled efficient tethering and retention of cofactor inside the lumen via ion-exchange interactions between oppositely charged polyelectrolytes and cofactor. With carbonic anhydrase assembled on the outer surface of the hollow nanofibers for accelerating hydration of CO2, these five-enzymes-cofactor catalyst system exhibited high activity for methanol synthesis. Compared with methanol yield of only 36.17% using free enzymes and cofactor, the hollow nanofiber-supported system afforded a high value up to 103.2%, the highest reported value so far. It was believed that the linear polyelectrolytes acted as spacers to enhance the shuttling of cofactor between enzymes that were coencapsulated within near vicinity, thus improving the efficiency of the system. The immobilized system showed good stability in reusing. About 80% of its original productivity was retained after 10 reusing cycles, with a cofactor-based cumulative methanol yield reached 940.5%.

Silica entrapment for significantly stabilized, energy-conducting light-harvesting complex (LHCII)

The major light-harvesting chlorophyll a/b complex (LHCII) of the photosynthetic apparatus in green plants consists of a membrane protein and numerous noncovalently bound pigments that make up about one-third of the molecular mass of the pigment-protein complex. Due to this high pigment density, LHCII is potentially interesting as a light-harvesting component in synthetic constructs. However, for such applications its stability needs to be significantly improved. In this work, LHCII was dramatically stabilized by enclosing it within polymerizing colloidal silica. The entrapped LHCII stayed functional at 50 °C for up to 24 h instead of a few minutes in detergent solution and clearly showed energy transfer between complexes. Entrapment yield was enhanced by a polycationic peptide attached to the N terminus. Both the extent of stabilization and the yield of entrapment strongly increased with decreasing diameters of the silica particles.

Bioinspired silica as drug delivery systems and their biocompatibility

Green nanosilicas offer improved biocompatibility and are excellent alternatives for drug delivery systems as they provide tailorability and eliminate many of the potential biomedical issues associated with mesoporous silicas.