Assembly, structures and properties of polyoxometalate-based supramolecular complexes involving in situ transformation of single-branch N-donor cyano ligands

A series of polyoxometalate-based supramolecular complexes were prepared with in situ transformation of single-branch N-donor cyano ligands, exhibiting diverse structures and good electrocatalytic and photocatalytic properties.

Preparation and characterization of novel polyoxometalate/CoFe2O4/metal-organic framework magnetic core-shell nanocomposites for the rapid removal of organic dyes from water

In this study, the MIL-101(Cr) metal–organic framework was functionalized with a Dowson-type polyoxometalate (P₂W₁₈O₆₂⁶⁻; POM) and magnetic spinel cobalt ferrite (CoFe₂O₄; CFO) through a hydrothermal route and was characterized by means of FT-IR, XRD, FE-SEM, EDX, BET, and VSM measurements. All analyses confirmed the successful encapsulation of POM (∼32.2 wt%) into the magnetic MIL-101(Cr) framework. Compared to the pristine MIL-101(Cr) MOF, the as-prepared magnetic ternary nanocomposite (abbreviated as POM/CFO/MIL-101(Cr)) demonstrated a notable decrease in both the surface area and pore volume because of the incorporation of CoFe₂O₄ nanoparticles and huge P₂W₁₈O₆₂⁶⁻ polyanions into the cages of the MIL-101(Cr) framework. The POM/CFO/MIL-101(Cr) was then applied as a magnetically separable adsorbent for the rapid elimination of rhodamine B (RhB), methyl orange (MO), and methylene blue (MB) dye pollutants from aqueous solutions. For achieving the optimized conditions, the effects of initial pH, initial dye concentration, temperature, salt effect, and adsorbent dose on MB and RhB elimination were investigated. The dye adsorption isotherms followed the Langmuir model and pseudo-second-order kinetic model. The POM/CFO/MIL-101(Cr) composite material not only exhibited a fast adsorption rate towards dye molecules, but also demonstrated the selective adsorption of the cationic dyes in wastewater. The recycling experiments also demonstrated that the POM/CFO/MIL-101(Cr) adsorbent was highly stable and could be quickly recovered under a magnetic field without any alteration in the structure. The high adsorption capacity, simple fabrication method, rapid separation by a magnet and supreme reusability of the POM/CFO/MIL-101(Cr) nanocomposite make it an attractive adsorbent for the elimination of cationic dyes from wastewater.

The magnetic CoFe₂O₄/MIL-101 (Cr) metal–organic framework nanocomposite containing P₂W₁₈O₆₂⁶⁻ polyoxometalate was fabricated and applied as an ultrafast adsorbent to remove organic dyes from water.

Three polyoxometalates-based organic–inorganic hybrids decorated with Cu–terpyridine complexes exhibiting dual functional electro-catalytic behaviors

Three new polyoxometalates-based organic–inorganic hybrids decorated with Cu–terpyridine complexes were prepared by using one-pot methods. Compounds 1–3 demonstrate discrepant dual functional electro-catalytic activities toward reduction of nitrite and oxidation of ascorbic acid.

Efficient and robust photocatalysts based on {P2W18} modified by an Ag complex

Ag⁺ and the flexible ligand bimb were introduced into Dawson phosphomolybdate systems as linkage units to induce two fascinating 3-D inorganic–organic networks, which exhibit excellent electro- and photo-catalytic behavior.

A series of organic–inorganic hybrid compounds formed by [P2W18O62]6−and several types of transition metal complexes

A series of new organic–inorganic hybrid compounds based on [P₂W₁₈O₆₂]⁶⁻and several types of transition metal complexes have been synthesized and characterized.

An Effective Strategy To Construct Novel Polyoxometalate-Based Hybrids by Deliberately Controlling Organic Ligand Transformation In Situ

Deliberately controlling organic ligand transformation in situ has remained a challenge for the construction of polyoxometalate (POM)-based inorganic-organic hybrids. In this work, four POM-based hybrids assembled from an in situ bifurcating organic ligand-[Cu2(DIBA)4](H3PMo12O40)·6H2O (1), [Cu2(DIBA)4](H4SiW12O40)·6H2O (2), [Ag(HDIBA)2](H2PMo12O40)·2H2O (3), [Ag3(HDIBA)2(H2O)][(P2W18O62)1/2]·4H2O (4) (DIBAH = 3,5-di(1H-imidazol-1-yl) benzoic acid)-have been designed and obtained under hydrothermal conditions. Compounds 1 and 2 are isostructural, displaying a three-dimensional (3D) 2-fold interpenetrating framework with two types of channels, and the bigger channels are occupied by Keggin polyoxoanions and crystallization water molecules, but only crystallization water molecules in the smaller ones. Compound 3 displays a 3D supramolecular structure constructed from {Ag(HDIBA)2} segments and PMo12O40(3-) polyoxoanions through hydrogen bonding interactions. Compound 4 shows a 3D 2-fold interpenetrating framework based on (3, 3, 4)-connected network, which is constructed from {Ag3(HDIBA)2}n chains and P2W18O62(6-) polyoxoanions as linkers. The DIBAH ligand was generated in situ from 3,5-di(1H-imidazol-1-yl)benzonitrile by deliberate design, which illustrates that the strategy to construct novel POM-based hybrids by controlling ligand transformation in situ is rational and feasible. In addition, the effects of the central metal and POMs on the structures of the target compounds were discussed. Finally, the electrochemical and photocatalytic properties of compounds 1-4 have been investigated in this paper.

Azide-bridged Cu(ii), Mn(ii) and Co(ii) coordination polymers constructed with a bifunctional ligand of 6-(1H-tetrazol-5-yl)-2,2′-bipyridine

Three new azide-bridged coordination polymers, [M(N₃)(tzbp)]_n (M = Cu, 1·Cu; Mn, 2·Mn; Co, 3·Co), were successfully prepared by introducing a bifunctional tetrazolate/2,2′-bipyridine ligand, 6-(1H-tetrazol-5-yl)-2,2′-bipyridine (Htzbp).

Architectural chemistry of polyoxometalate-based coordination frameworks constructed from flexible N-donor ligands

Polyoxometalate-based coordination frameworks (POMCFs) constructed from flexible N-donor ligands can exhibit diverse properties and fascinating architectures, extending the families of material chemistry and structural chemistry.

Three multi-nuclear clusters and one infinite chain induced by a pendant 4-butyl-1H-pyrazole ligand for modification of Keggin anions

By utilizing a pendant 4-butyl-1H-pyrazole, four POM-based multi-nuclear clusters or infinite chain subunits are formed: tetra-, tri- and penta-nuclear clusters in 1, 3 and 4 and an infinite chain in 2.

An unprecedented 3D POM–MOF based on (7,8)-connected twin Wells–Dawson clusters: synthesis, structure, electrocatalytic and photocatalytic properties

The first (7,8)-connected POM–MOF has been obtained, representing the highest connected POMs to any mixed-connected POM–MOF and a unique structure that contains organic–inorganic and all-inorganic networks.

Two novel structures based on an organic ligand with two different coordination modes

Two novel 3-D POMMOF structures containing both metal–organic frameworks and pure inorganic frameworks have been synthesized.

A novel polyoxometalate templated microporous metal–organic framework with electrochemical properties

A novel Wells–Dawson polyoxometalate-templated 3D microporous metal–organic framework with a rare 8⁶ uniform net was obtained, which showed electrochemical properties.

A series of polyoxometalate-based compounds including infinite Ag belts and circles constructed by two tolyl-1H-tetrazole isomers

Three novel Keggin-based complexes constructed by two new isomeric ligands 5-o-tolyl-1H-tetrazole and 5-m-tolyl-1H-tetrazole have been synthesized under hydrothermal conditions via changing the types of POM anions and organic ligands.

Copper-organic frameworks assembled from in situ generated 5-(4-pyridyl)tetrazole building blocks: synthesis, structural features, topological analysis and catalytic oxidation of alcohols

Two new metal-organic compounds {[Cu3(μ3-4-ptz)4(μ2-N3)2(DMF)2](DMF)2}n (1) and {[Cu(4-ptz)2(H2O)2]}n (2) {4-ptz = 5-(4-pyridyl)tetrazolate} with 3D and 2D coordination networks, respectively, have been synthesized while studying the effect of reaction conditions on the coordination modes of 4-pytz by employing the [2 + 3] cycloaddition as a tool for generating in situ the 5-substituted tetrazole ligands from 4-pyridinecarbonitrile and NaN3 in the presence of a copper(ii) salt. The obtained compounds have been structurally characterized and the topological analysis of 1 discloses a topologically unique trinodal 3,5,6-connected 3D network which, upon further simplification, results in a uninodal 8-connected underlying net with the bcu (body centred cubic) topology driven by the [Cu3(μ2-N3)2] cluster nodes and μ3-4-ptz linkers. In contrast, the 2D metal-organic network in 2 has been classified as a uninodal 4-connected underlying net with the sql [Shubnikov tetragonal plane net] topology assembled from the Cu nodes and μ2-4-ptz linkers. The catalytic investigations disclosed that 1 and 2 act as active catalyst precursors towards the microwave-assisted homogeneous oxidation of secondary alcohols (1-phenylethanol, cyclohexanol, 2-hexanol, 3-hexanol, 2-octanol and 3-octanol) with tert-butylhydroperoxide, leading to the yields of the corresponding ketones up to 86% (TOF = 430 h(-1)) and 58% (TOF = 290 h(-1)) in the oxidation of 1-phenylethanol and cyclohexanol, respectively, after 1 h under low power (10 W) microwave irradiation, and in the absence of any added solvent or additive.

Loading of PPy on the surface of transition metal coordination polymer modified polyoxometalate (TMCP/POM): a feasible strategy to obtain visible light active and high quantum yields POM based photocatalyst

PPy loaded TMCP/POM composite materials were fabricated successfully and display better photocatalytic activity than TMCP/POM under visible light irradiation.