Effect of the Protein Chain Conformation on the Collapse into Nanoparticles

Protein single-chain nanoparticles can outperform synthetic nanoparticles in biomedical applications due to enhanced biocompatibility. Compared to synthetic (co)polymers, the chemical complexity of proteins challenges chain conformation control. Here, we investigate the impact of the precursor chain conformation of bovine serum albumin (BSA) on the nanoparticle structure after intramolecular cross-linking. We explore the urea concentration (denaturant), pH, salt, cross-linker length, and concentration. Small-angle neutron scattering and dynamic light scattering experiments reveal a shrinking chain conformation upon cross-linking. However, the ability to collapse depends on solvent conditions: more expanded chains collapse more, whereas proteins that are already compact barely change in size upon cross-linking. Static light scattering measurements demonstrate that binding is primarily intramolecular. The use of a shorter cross-linker does not lead to collapse of extended chains. Overall, BSA exhibits a similar behavior to that of polymer nanoparticles, which then allows to harness the precursor conformation for morphological control.

Scattering approaches to unravel protein solution behaviors in ionic liquids and deep eutectic solvents: From basic principles to recent developments

Proteins in ionic liquids (ILs) and deep eutectic solvents (DESs) have gained significant attention due to their potential applications in various fields, including biocatalysis, bioseparation, biomolecular delivery, and structural biology. Scattering approaches including dynamic light scattering (DLS) and small-angle X-ray and neutron scattering (SAXS and SANS) have been used to understand the solution behavior of proteins at the nanoscale and microscale. This review provides a thorough exploration of the application of these scattering techniques to elucidate protein properties in ILs and DESs. Specifically, the review begins with the theoretical foundations of the relevant scattering approaches and describes the essential solvent properties of ILs and DESs linked to scattering such as refractive index, scattering length density, ion-pairs, liquid nanostructure, solvent aggregation, and specific ion effects. Next, a detailed introduction is provided on protein properties such as type, concentration, size, flexibility and structure as observed through scattering methodologies. This is followed by a review of the literature on the use of scattering for proteins in ILs and DESs. It is highlighted that enhanced data analysis and modeling tools are necessary for assessing protein flexibility and structure, and for understanding protein hydration, aggregation and specific ion effects. It is also noted that complementary approaches are recommended for comprehensively understanding the behavior of proteins in solution due to the complex interplay of factors, including ion-binding, dynamic hydration, intermolecular interactions, and specific ion effects. Finally, the challenges and potential research directions for this field are proposed, including experimental design, data analysis approaches, and supporting methods to obtain fundamental understandings of complex protein behavior and protein systems in solution. We envisage that this review will support further studies of protein interface science, and in particular studies on solvent and ion effects on proteins.

Impact of Ultrafiltration on the Physicochemical Properties of Bovine Lactoferrin: Insights into Molecular Mass, Surface Morphology, and Elemental Composition

The large-scale isolation of bovine lactoferrin (bLF) typically involves using large amounts of concentrated eluents, which might introduce impurities to the final product. Sometimes, protein pre-concentration is required for the greater accuracy of experimental results. In this research, the supplied bLF sample was subjected to additional ultrafiltration (UF) to eliminate possible small impurities, such as salts and peptides of bLF. Beforehand, the basic characterization of native bLF, including surface-charge properties and the structural sensitivity to the various pH conditions, was performed. The study aimed to evaluate the difference in molecular mass, primary structure, surface morphology, and elemental composition of the protein before and after UF. The research was provided by application of spectroscopic, spectrometric, electrophoretic, and microscopic techniques. The evident changes in the surface morphology of bLF were observed after UF, while the molecular masses of both proteins were comparable. According to MALDI-TOF/MS results, UF had a positive impact on the bLF sample representation, improving the identification parameters, such as sequence coverage and intensity coverage.

Evolution of the structure and interaction in the surfactant-dependent heat-induced gelation of protein

The addition of a surfactant and/or an increase in temperature disrupt the native structure of proteins, where high temperature further results in protein gelation. However, in a mixed protein-surfactant system, surfactant concentration and temperature have been observed to exhibit both mutually associative and counter-balancing effects towards heat-induced gelation of protein-surfactant dispersion. This study is conducted on globular bovine serum albumin (BSA) protein and cationic surfactant dodecyl trimethyl ammonium bromide (DTAB), which interact strongly owing to their oppositely charged nature. The findings reveal that the BSA-DTAB suspension undergoes gelation with increasing temperature but only at lower concentrations of DTAB, where the presence of the surfactant facilitates gelation (associative effect). Conversely, as the surfactant concentration increases beyond a critical value, temperature-driven gelation of the BSA-DTAB system is completely inhibited, despite surfactant-induced protein denaturation (counter-balancing effect). To conceptualize these results, we compared them with observations made in a system comprising protein and a similarly charged surfactant, sodium dodecyl sulfate (SDS). It has been further demonstrated that the anionic surfactant (SDS) can restrict protein gelation at much lower concentration compared to the cationic surfactant (DTAB). The evolution of the structure and interaction during gel formation/inhibition has been examined to understand the underlying mechanism guiding these sol-gel transitions. We present a comprehensive phase diagram, encompassing the solution/gel states of the protein-surfactant dispersion, with respect to the dispersion temperature, surfactant concentration, and ionic behavior (anionic or cationic) of the surfactants.

Catalytic Performance in Nitroarene Reduction of Nanocatalyst Based on Noble Metal Nanoparticles Supported on Polymer/s-Layer Protein Hybrids

We present a novel bionanocatalyst fabricated by the adsorption-reduction of metal ions on a polyurethane/S-layer protein biotemplate. The bioinspired support was obtained by the adsorption of S-layer proteins (isolated from Lentilactobacillus kefiri) on polyurethane particles. Silver and platinum nanoparticles were well-loaded on the surface of the support after the combination with metallic salts and reduction with H2 at room temperature. Transmission electron microscopy analysis revealed the strawberry-like morphology of the bionanocatalysts with a particle size, dn, of 2.39 nm for platinum and 9.60 nm for silver. Both systems catalyzed the hydrogenation of p-nitrophenol to p-aminophenol with high efficiency in water at mild conditions in the presence of NaBH4. Three different amounts of bionanocatalyst were tested, and in all cases, conversions between 97 and 99% were observed. The catalysts displayed excellent recyclability over ten cycles, and no extensive damage in their nanostructure was noted after them. The bionanocatalysts were stable during their production, storage, and use, thanks to the fact that the biosupport provides an effective driving force in the formation and stabilization of the metallic nanoparticles. The successful bioinspired production strategy and the good catalytic ability of the systems are encouraging in the search for nontoxic, simple, clean, and eco-friendly procedures for the synthesis and exploitation of nanostructures.

Self-assembly and hydrogelation of a potential bioactive peptide derived from quinoa proteins

In this work the identification of peptides derived from quinoa proteins which could potentially self-assemble, and form hydrogels was carried out with TANGO, a statistical mechanical based algorithm that predicts β-aggregate propensity of peptides. Peptides with the highest aggregate propensity were subjected to gelling screening experiments from which the most promising bioactive peptide with sequence KIVLDSDDPLFGGF was selected. The self-assembling and hydrogelation properties of the C-terminal amidated peptide (KIVLDSDDPLFGGF-NH2) were studied. The effect of concentration, pH, and temperature on the secondary structure of the peptide were probed by circular dichroism (CD), while its nanostructure was studied by transmission electron microscopy (TEM) and small-angle neutron scattering (SANS). Results revealed the existence of random coil, α-helix, twisted β-sheet, and well-defined β-sheet secondary structures, with a range of nanostructures including elongated fibrils and bundles, whose proportion was dependant on the peptide concentration, pH, or temperature. The self-assembly of the peptide is demonstrated to follow established models of amyloid formation, which describe the unfolded peptide transiting from an α-helix-containing intermediate into β-sheet-rich protofibrils. The self-assembly is promoted at high concentrations, elevated temperatures, and pH values close to the peptide isoelectric point, and presumably mediated by hydrogen bond, hydrophobic and electrostatic interactions, and π-π interactions (from the F residue). At 15 mg/mL and pH 3.5, the peptide self-assembled and formed a self-supporting hydrogel exhibiting viscoelastic behaviour with G' (1 Hz) ~2300 Pa as determined by oscillatory rheology measurements. The study describes a straightforward method to monitor the self-assembly of plant protein derived peptides; further studies are needed to demonstrate the potential application of the formed hydrogels in food and biomedicine.

New insights into protein stabilized emulsions captured via neutron and X-ray scattering: An approach with β-lactoglobulin at triacylglyceride-oil/water interfaces

HYPOTHESIS

To analyze protein stabilized emulsions, SAXS and SANS are emerging techniques capturing oil droplet radius, interfacial coverage and structure. Protein shape, thus protein structure change during interfacial adsorption with partial protein unfolding is detected via SAXS analysis at and below the monolayer concentration for proteins, known as critical interfacial concentration (CIC). SANS determines the same phenomena below and above the CIC, via contrast variation and coarse-grained modelling.

EXPERIMENTS

β-lactoglobulin concentration dependent SAXS experiments were performed focusing on molecular length scales to characterize protein shape in water, and interfacial structure in emulsions. Complementary SANS experiments with contrast variation via deuterated triacylglyceride-oil provided insight into oil droplet radius, interfacial coverage and structure via data analysis with scattering models and low-resolution shape reconstruction with the DENFERT model.

FINDINGS

SAXS and SANS experiments allowed to determine the interfacial structure below and above the CIC, as well as oil droplet radius and interfacial coverage. These findings were identified via Q-4 Porod scattering at low-Q, protein scattering at high Q, and a Q-2 scattering of the interface. Since SANS with accurate contrast variation highlights the interface in comparison to other techniques like FTIR, the presented results show a high impact to understand interfaces in emulsions.

Bridging attraction of condensed bovine serum albumin solution in the presence of trivalent ions: A SANS study

The bridging attraction of condensed bovine serum albumin (BSA) solution (D2O) in the presence of yttrium chloride (YCl3) was studied by small angle neutron scattering (SANS). With increasing the concentration of YCl3 (cY) from 3 to 15 mM and from 15 to 100 mM, the intensity in low-q region increases and then decreases. Combining the tri-axial ellipsoid (TaE) geometry and the multi-component sticky hard sphere (SHS) potential, a SHS-TaE model was established to quantitatively determine the size and distribution of particles. In this way, the structural mechanism of the aggregation-redissolution process in protein solution was demonstrated and discussed. As cY increases from 3 to 100 mM, the SHS radius rL decreases from ca. 2.97 to 2.50 nm, suggesting that the relatively well dispersed BSAs may form aggregates with various polydispersities. The axis a increases from 1.88 to 2.30 nm, while b and c decrease from 3.53 to 3.23 nm and from 4.12 to 3.55 nm, respectively. (RgTaE decreases from ca. 2.57 to 2.38 nm). Moreover, the scattering length density (SLD) of BSA decreases from 3.67 to 1.56 × 10-6 Å-2. All these results consistently indicate a strengthened attraction and the BSA molecules might shrink and tune out to be more like of oblate ellipsoid with increasing the amount of YCl3.

Competitive effects of salt and surfactant on the structure of nanoparticles in a binary system of nanoparticle and protein

Small-angle neutron scattering (SANS) and dynamic light scattering (DLS) experiments have been carried out to study the competitive effects of NaCl and sodium dodecyl sulfate (SDS) surfactant on the evolution of the structure and interactions in a silica nanoparticle-Bovine serum albumin (BSA) protein system. The unique advantage of contrast-matching SANS has been utilized to particularly probe the structure of nanoparticles in the multi-component system. Silica nanoparticles and BSA protein both being anionic remain largely individual in the solution without significant adsorption. The non-adsorbing nature of protein is known to cause depletion attraction between nanoparticles at higher protein concentrations. The nanoparticles undergo immediate aggregation in the nanoparticle-BSA system on the addition of a small amount of salt [referred as the critical salt concentration (CSC)], much less than that required to induce aggregation in a pure nanoparticle dispersion. The salt ions screen the electrostatic repulsion between the nanoparticles, whereby the BSA-induced depletion attraction dominates the system and contributes to the nanoparticle aggregation of a mass fractal kind of morphology. Further, the addition of SDS in this system interestingly suppresses nanoparticle aggregation for salt concentrations lower than the CSC. The presence of SDS gives rise to additional electrostatic repulsion in the system by binding with the BSA protein via electrostatic and hydrophobic interactions. For salt concentrations higher than the CSC, the formation of clusters of nanoparticles is inevitable even in the presence of protein-surfactant complexes, but the mass fractal kind of branched aggregates transform to surface fractals. This has been attributed to the BSA-SDS complex induced depletion attraction along with salt-driven screening of electrostatic repulsion. Thus, the interplay of depletion and electrostatic and hydrophobic interactions has been utilized to tune the structures formed in a multicomponent silica nanoparticle-BSA-SDS/NaCl system.

Purification, characterization and proteolytic processing of mosquito larvicidal protein Cry11Aa from Bacillus thuringensis subsp. isralensis ISPC-12

Cry11Aa is the most potent mosquito larvicidal protein of Bacillus thuringiensis subsp. israelensis (Bti). Development of resistance against insecticidal proteins including Cry11Aa is known but no field resistance was observed with Bti. The phenomenon of increasing resistance in insect pests necessitates the development of new strategies and techniques to enhance efficacy of insecticidal proteins. Recombinant technology offers better control over the molecule and allows modification of protein to achieve maximal effect against target pests. In this study, we standardised protocol for recombinant purification of Cry11Aa. Recombinant Cry11Aa found active against larvae of Aedes and Culex mosquito species and LC₅₀ were estimated. Detailed biophysical characterization provides crucial insights into stability and in-vitro behaviour of the recombinant Cry11Aa. Moreover, trypsin hydrolysis doesn't improve overall toxicity of recombinant Cry11Aa. Proteolytic processing suggests domain I and II are more prone to proteolysis in comparison to domain III. Significance of structural features for proteolysis of Cry11Aa was observed after performing molecular dynamics simulations. Findings reported here are contributing significantly in method for purification, understanding in-vitro behaviour and proteolytic processing of Cry11Aa which could facilitate in efficient utilisation of Bti for insect pests and vectors control.

Effects of flexibility in coarse-grained models for bovine serum albumin and immunoglobulin G

We construct a coarse-grained, structure-based, low-resolution, 6-bead flexible model of bovine serum albumin (BSA, PDB: 4F5S), which is a popular example of a globular protein in biophysical research. The model is obtained via direct Boltzmann inversion using all-atom simulations of a single molecule, and its particular form is selected from a large pool of 6-bead coarse-grained models using two suitable metrics that quantify the agreement in the distribution of collective coordinates between all-atom and coarse-grained Brownian dynamics simulations of solutions in the dilute limit. For immunoglobulin G (IgG), a similar structure-based 12-bead model has been introduced in the literature [Chaudhri et al., J. Phys. Chem. B 116, 8045 (2012)] and is employed here to compare findings for the compact BSA molecule and the more anisotropic IgG molecule. We define several modified coarse-grained models of BSA and IgG, which differ in their internal constraints and thus account for a variation of flexibility. We study denser solutions of the coarse-grained models with purely repulsive molecules (achievable by suitable salt conditions) and address the effect of packing and flexibility on dynamic and static behavior. Translational and rotational self-diffusivity is enhanced for more elastic models. Finally, we discuss a number of effective sphere sizes for the BSA molecule, which can be defined from its static and dynamic properties. Here, it is found that the effective sphere diameters lie between 4.9 and 6.1 nm, corresponding to a relative spread of about ±10% around a mean of 5.5 nm.

A round-robin approach provides a detailed assessment of biomolecular small-angle scattering data reproducibility and yields consensus curves for benchmarking

Through an expansive international effort that involved data collection on 12 small-angle X-ray scattering (SAXS) and four small-angle neutron scattering (SANS) instruments, 171 SAXS and 76 SANS measurements for five proteins (ribonuclease A, lysozyme, xylanase, urate oxidase and xylose isomerase) were acquired. From these data, the solvent-subtracted protein scattering profiles were shown to be reproducible, with the caveat that an additive constant adjustment was required to account for small errors in solvent subtraction. Further, the major features of the obtained consensus SAXS data over the q measurement range 0-1 Å-1 are consistent with theoretical prediction. The inherently lower statistical precision for SANS limited the reliably measured q-range to <0.5 Å-1, but within the limits of experimental uncertainties the major features of the consensus SANS data were also consistent with prediction for all five proteins measured in H2O and in D2O. Thus, a foundation set of consensus SAS profiles has been obtained for benchmarking scattering-profile prediction from atomic coordinates. Additionally, two sets of SAXS data measured at different facilities to q > 2.2 Å-1 showed good mutual agreement, affirming that this region has interpretable features for structural modelling. SAS measurements with inline size-exclusion chromatography (SEC) proved to be generally superior for eliminating sample heterogeneity, but with unavoidable sample dilution during column elution, while batch SAS data collected at higher concentrations and for longer times provided superior statistical precision. Careful merging of data measured using inline SEC and batch modes, or low- and high-concentration data from batch measurements, was successful in eliminating small amounts of aggregate or interparticle interference from the scattering while providing improved statistical precision overall for the benchmarking data set.

Determination of the Structures of Lignin Subunits and Nanoparticles in Solution by Small-Angle Neutron Scattering: Towards Improving Lignin Valorization

Lignin nanoparticles (LNPs) are usually produced from lignin solution through supersaturation. The structure of the lignin in solution is still poorly understood due to structural variability of isolated lignins. Here, lignins were extracted from different plants to establish a general pattern of their structure in several lignin solvents. Lignin molecules (lignin subunits) and larger aggregates were observed in dimethyl sulfoxide (DMSO), ethylene glycol (EG) and 0.1 N NaOD solutions by small-angle neutron scattering (SANS). It was proposed that the aggregates were composed of lignin subunits with a higher molecular weight and a higher ratio of the aliphatic to phenolic hydroxyl groups. The size, shape, and compactness are important factors that affect the uses of the LNPs, which were obtained from the SANS data for the first time. A discrepancy in the radius between SANS and DLS was discovered, pointing to a large hydration shell around the LNPs in aqueous solutions. The cytotoxicity of the corncob lignin, kraft lignin, and their LNPs were measured and compared.

Structural interpretations of a flexible cold-active AMS8 lipase by combining small-angle X-ray scattering and molecular dynamics simulation (SAXS-MD)

Determining structure of highly flexible protein with multiple conformations can be challenging. This paper aims to combine molecular dynamics (MD) and small angle X-ray diffraction (SAX) techniques as a solution to overcome issues related to protein conformation in hardly crystallized protein. Based on prior studies, a cold-active lipase AMS8 was simulated in solvents showing stability in its N-terminal and high flexibility in its C-terminal. However, MD in its own algorithm could not explain the basis of macromolecule conformational transitions or changes related to protein through folding. Hence, by combining SAXS with MD, it is possible to understand the structure of flexible AMS8 lipase in natural space. Based on the findings, SAXS ab-initio model of AMS8 lipase was identified as a monomeric protein in which the optimized model of cold-active lipase AMS8 derived from SAXS data was found to be aligned with AMS8 homology model under series of MD timeframe.

Interaction of a bovine serum albumin (BSA) protein with mixed anionic-cationic surfactants and the resultant structure

The interaction of a bovine serum albumin (BSA) protein with the mixture of anionic sodium dodecyl sulfate (SDS) and cationic dodecyltrimethylammonium bromide (DTAB) has been investigated by small-angle neutron scattering (SANS) and dynamic light scattering (DLS). Both SDS and DTAB as individuals interact electrostatically as well as hydrophobically with BSA and form connected protein-decorated micelle like complexes in the aqueous solution, in which the well-defined surfactant micelles are organized along the randomly distributed unfolded polypeptide chain of the protein. The protein-surfactant interaction has been tuned by adding different molar mixtures of SDS and DTAB in BSA aqueous solution. It is found that a lower molar fraction of either surfactant in the protein-mixed surfactant complexes results in the formation of a connected protein-decorated micelle structure similar to those of pure surfactants. As the molar fraction of one of the surfactants in the mixture approaches the equimolar fraction, the structure formed by the protein-mixed surfactant is very different from the connected protein-decorated micelle like structure. Different microstructures of BSA-mixed surfactant complexes are formed, mostly governed by the structure of mixed surfactants arising from the strong electrostatic interaction of oppositely charged components. In this case, unfolded proteins wrap the structures of mixed surfactants around their surface. Along with the connected protein-decorated micelle like structure, rod-like and bilayer vesicles of protein-surfactant complexes are formed at different molar fractions of mixed surfactants.

Effect of ionic liquids on the fluorescence properties and aggregation of superfolder green fluorescence protein

Proteins generally tend to aggregate with less desirable properties in numerous solvents, which is one of the major challenges in the development of solvents for functional proteins. This work aims to utilize fluorescence spectroscopy and small angle X-ray scattering (SAXS) to understand the effects of ionic liquids (ILs) on the fluorescence and aggregation behavior of superfolder green fluorescent protein (sfGFP). The studied ILs consisted of four different anions coupled with primary, tertiary and quaternary ammonium cations. The results show that the chromophore fluorescence was generally maintained in 1 mol% IL-water mixtures, then decreased with increasing IL concentration. We primarily employed the pseudo-radius of gyration (pseudo-R_g) to evaluate sfGFP aggregation. The sfGFP was less aggregated with nitrate-based ILs compared to in buffer, and more aggregated in the mesylate-based ILs. Further, we show that the polyol additives of glycerol and glucose in IL-water mixtures slightly decreased the sfGFP propensity to aggregate. Size-exclusion chromatography (SEC)-SAXS was used to characterize the monomeric sfGFP in ethylammonium nitrate (EAN) and triethylammonium mesylate (TEAMs)-water mixtures. The presence of 1 mol% TEAMs maintained the sfGFP fluorescence, promoted the compact structure, but slightly increased the amount of large aggregates, which contrasted with that of EAN.

µDrop: a system for high-throughput small-angle X-ray scattering measurements of microlitre samples

An automatic sample changer system for measurements of large numbers of liquid samples - the µDrop Sample Changer - is presented. It is based on a robotic arm equipped with a pipetting mechanism, which is combined with a novel drop-based sample holder. In this holder a drop of liquid is suspended between two parallel plates by surface tension. The absence of a transfer line benefits the cleaning, improving the background as well as making it faster and more efficient than most comparable capillary-based systems. The µDrop Sample Changer reaches cycle times below 35 s and can process up to 480 samples in a single run. Sample handling is very reliable, with a drop misplacement chance of about 0.2%. Very low sample volumes (<20 µl) are needed and repeatable measurements were performed down to 6 µl. Using measurements of bovine serum albumin and lysozyme, the performance of the instrument and quality of the gathered data of low and high concentrations of proteins are presented. The temperature of samples can also be controlled during storage and during measurement, which is demonstrated by observing a phase transition of a mesophase-forming lipid solution. The instrument has been developed for use in small-angle X-ray scattering experiments, which is a well established technique for measuring (macro-)molecules. It is commonly used in biological studies, where often large sets of rare samples have to be measured.

Elastic compliance and adsorption profiles of Bovine serum albumin at fluid/solid interface in the presence of electrolytes

Non-trivial topology of proteins under shear suggests that even small structural changes in proteins result in dramatic variations in the mechanical properties and stability. In this study, we have analysed the elastic compliance of solvated bovine serum albumin (BSA) with NaCl,MgCl2, FeCl3 of concentration-ranging from 50 mM to 250 mM using Quartz crystal microbalance with dissipation. The compliance shows a reverse Hofmeister trend (Na +  Collapse

Key Words

• BSA
• Elastic compliance
• FRET
• Intra molecular interaction
• Ion cloud

Collapse

MESH Headings

• Serum Albumin, Bovine/chemistry
• Animals
• Cattle
• Adsorption
• Electrolytes/chemistry
• Elasticity
• Magnesium Chloride/chemistry
• Quartz Crystal Microbalance Techniques
• Sodium Chloride/chemistry
• Scattering, Small Angle
• Ferric Compounds/chemistry
• Chlorides/chemistry
• X-Ray Diffraction

Collapse

Grants Collapse

Affiliation(s)

A Bruntha Advanced Materials Laboratory, CSIR-Central Leather Research Institute, Adyar, Chennai 600020, India; Academy of Scientific and Innovative Research (AcSIR), Ghaziabad 201002, India
R Radhipriya Advanced Materials Laboratory, CSIR-Central Leather Research Institute, Adyar, Chennai 600020, India
Thanikaivelan Palanisamy Advanced Materials Laboratory, CSIR-Central Leather Research Institute, Adyar, Chennai 600020, India; Academy of Scientific and Innovative Research (AcSIR), Ghaziabad 201002, India
A Dhathathreyan Advanced Materials Laboratory, CSIR-Central Leather Research Institute, Adyar, Chennai 600020, India; Academy of Scientific and Innovative Research (AcSIR), Ghaziabad 201002, India.

Collapse

Packing and dynamics of a protein solution approaching the jammed state

The packing of proteins and their collective behavior in crowded media is crucial for the understanding of biological processes. Here we study the structural and dynamical evolution of solutions of the globular protein bovine serum albumin with increasing concentration via drying using small angle X-ray scattering and dynamic light scattering. We probe an evolving correlation peak on the scattering profile, corresponding to the inter-protein distance, ξ, which decreases following a power law of the protein volume fraction, φ. The rate of decrease in ξ becomes faster above a protein concentration of ∼200 mg ml-1 (φ = 0.15). The power law exponent changes from 0.33, which is typical of colloidal or protein solutions, to 0.41. During the entire drying process, we observe the development and the growth of two-step relaxation dynamics with increasing φ as revealed by dynamic light scattering. We find three different regimes of the dependence of ξ as a function of φ. In the dilute regime (φ < 0.22), protein molecules are far apart from each other compared to their size. In this case, the dynamics mainly corresponds to Brownian motion. At an intermediate concentration (0.22 < φ < 0.47), inter-protein distances become comparable to the size of protein molecules, leading to a preferential orientation of the ellipsoidal protein molecules along with a possible deformation. In this regime, the dynamics shows two distinct relaxation times. At a very high concentration (φ > 0.47), the system reaches a jammed state. Subsequently, the secondary relaxation time in this state becomes extremely slow. In this state, the protein molecules have approximately one hydration layer. This study contributes to the understanding of protein molecular packing in crowded environments and the phenomenon of density-driven jamming for soft matter systems.

Highly precise characterization of the hydration state upon thermal denaturation of human serum albumin using a 65 GHz dielectric sensor

The biological functions of proteins depend on harmonization with hydration water surrounding them. Indeed, the dynamical transition of proteins, such as thermal denaturation, is dependent on the changes in the mobility of hydration water. However, the role of hydration water during dynamical transition is yet to be fully understood due to technical limitations in precisely characterizing the amount of hydration water. A state-of-the-art CMOS dielectric sensor consisting of 65 GHz LC resonators addressed this issue by utilizing the feature that oscillation frequency sensitively shifts in response to the complex dielectric constant at 65 GHz with extremely high precision. This study aimed to establish an analytical algorithm to derive the hydration number from the measured frequency shift and to demonstrate the transition of hydration number upon the thermal denaturation of human serum albumin. The determined hydration number in the native state drew a "global" hydration picture beyond the first solvation shell, with substantially reduced uncertainty of the hydration number (about ±1%). This allowed the detection of a rapid increase in the hydration number at about 55 °C during the heating process, which was in excellent phase with the irreversible rupture of the α-helical structure into solvent-exposed extended chains, whereas the hydration number did not trace the forward path in the subsequent cooling process. Our result indicates that the weakening of water hydrogen bonds trigger the unfolding of the protein structure first, followed by the changes in the number of hydration water as a consequence of thermal denaturation.

Fabrication of Artificial Nanobasement Membranes for Cell Compartmentalization in 3D Tissues

In recent decades, tissue engineering techniques have attracted much attention in the construction of 3D tissues or organs. However, even though precise control of cell locations in 3D has been achieved, the organized cell locations are easily destroyed because of the cell migration during the cell culture period. In human body, basement membranes (BMs) maintain the precise cell locations in 3D (compartmentalization). Constructing artificial BMs that mimic the structure and biofunctions of natural BMs remains a major challenge. Here, a nanometer-sized artificial BM through layer-by-layer assembly of collagen type IV (Col-IV) and laminin (LM), chosen because they are the main components of natural BMs, is reported. This multilayered Col-IV/LM nanofilm imitates natural BM structure closely, showing controllable and similar components, thickness, and fibrous network. The Col-IV/LM nanofilms have high cell adhesion properties and maintain the spreading morphology effectively. Furthermore, the barrier effect of preventing cell migration but permitting effective cell-cell crosstalk between fibroblasts and endothelial cells demonstrates the ability of Col-IV/LM nanofilms for cell compartmentalization in 3D tissues, providing more reliable tissue models for evaluating drug efficacy, nanotoxicology, and implantation.

Platinum Nanoparticles Obtained at Mild Conditions on S-Layer Protein/Polymer Particle Supports

This work presents the synthesis of platinum nanoparticles supported on S-layer protein/polymeric particle systems, obtained by combining proteins isolated from Lactobacillus kefiri and an aqueous dispersion of acrylic particles. FTIR spectra of the protein/polymer supports did not show changes in the Amide I band of the proteins, suggesting that proteins maintained their conformation after adsorption. The SAXS spectra and DLS results are consistent with the formation of a protein corona around the polymer particles. After combining the supports with the platinum complex and subsequently reducing the combination with hydrogen at mild conditions, we obtained colloidal nanocomposite materials. In these, platinum nanoparticles with diameters around 3 nm located on the surface of the protein/polymer supports were observed by TEM. The obtained nanosystems showed catalytic activity in the reduction of p-nitrophenol with NaBH₄ at room temperature with conversions of 100% for reaction times of 50 to 70 min.

Aqueous colloidal systems of bovine serum albumin and functionalized surface active ionic liquids for material transport

Physicochemical and computational investigation of complexation between BSA and SAILs with application in material transport.

Controlled assembly of filamentous viruses into hierarchical nano- to microstructures at liquid/liquid interfaces

Recently, viruses have been regarded as useful molecular assemblies for materials applications rather than as disease-causing agents. The orderly assembled structures of the viruses are highly related to the resultant properties and functions of the assemblies; however, methods to control the assembly are still limited. Here, we demonstrated the assembly of filamentous viruses into hierarchical nano- to microstructures at liquid/liquid interfaces through emulsification in a controlled manner. The viruses form fibrous nanostructures of several micrometers length, which are much longer than the original virus. Subsequently, the fibers self-assemble into well-packed ordered microstructures. Furthermore, the resultant hierarchically assembled structures showed long-term stability and potential applicability through the desired functionalization.

Assembly of filamentous viruses into hierarchical nano- to microstructures in a controlled manner was demonstrated using the liquid/liquid interface.

Localised contacts lead to nanosecond hinge motions in dimeric bovine serum albumin

Domain motions in proteins are crucial for biological function. In the present manuscript, we present a neutron spin-echo spectroscopy (NSE) study of native bovine serum albumin (BSA) in solution. NSE allows to probe both global and internal dynamics of the BSA monomer and dimer equilibrium that is formed in solution. Using a model independent approach, we were able to identify an internal dynamic process in BSA that is visible in addition to global rigid-body diffusion of the BSA monomer and dimer mixture. The observed internal protein motion is characterised by a relaxation time of 43 ns. The overdamped Brownian oscillator was considered as an alternative analytical theory that was able to describe the internal process as first-order approximation. More detailed information on the physical nature of the internal protein motion was extracted from the q-dependent internal diffusion coefficients ΔDeff(q) that were detected by NSE in addition to global rigid-body translational and rotational diffusion. The ΔDeff(q) were interpreted using normal mode analysis based on the available crystal structures of the BSA monomer and dimer as structural test models. Normal mode analysis demonstrates that the observed internal dynamic process can be attributed to bending motion of the BSA dimer. The native BSA monomer does not show any internal dynamics on the time- and length-scales probed by NSE. An intermolecular disulphide bridge or a direct structural contact between the BSA monomers forms a localised link acting as a molecular hinge in the BSA dimer. The effect of that hinge on the observed motion of BSA in the used dimeric structural model is discussed in terms of normal modes in a molecular picture.

Generation of the configurational ensemble of an intrinsically disordered protein from unbiased molecular dynamics simulation

Intrinsically disordered proteins (IDPs) are abundant in eukaryotic proteomes, play a major role in cell signaling, and are associated with human diseases. To understand IDP function it is critical to determine their configurational ensemble, i.e., the collection of 3-dimensional structures they adopt, and this remains an immense challenge in structural biology. Attempts to determine this ensemble computationally have been hitherto hampered by the necessity of reweighting molecular dynamics (MD) results or biasing simulation in order to match ensemble-averaged experimental observables, operations that reduce the precision of the generated model because different structural ensembles may yield the same experimental observable. Here, by employing enhanced sampling MD we reproduce the experimental small-angle neutron and X-ray scattering profiles and the NMR chemical shifts of the disordered N terminal (SH4UD) of c-Src kinase without reweighting or constraining the simulations. The unbiased simulation results reveal a weakly funneled and rugged free energy landscape of SH4UD, which gives rise to a heterogeneous ensemble of structures that cannot be described by simple polymer theory. SH4UD adopts transient helices, which are found away from known phosphorylation sites and could play a key role in the stabilization of structural regions necessary for phosphorylation. Our findings indicate that adequately sampled molecular simulations can be performed to provide accurate physical models of flexible biosystems, thus rationalizing their biological function.

Temperature, Hydrostatic Pressure, and Osmolyte Effects on Liquid-Liquid Phase Separation in Protein Condensates: Physical Chemistry and Biological Implications

Liquid-liquid phase separation (LLPS) of proteins and other biomolecules play a critical role in the organization of extracellular materials and membrane-less compartmentalization of intra-organismal spaces through the formation of condensates. Structural properties of such mesoscopic droplet-like states were studied by spectroscopy, microscopy, and other biophysical techniques. The temperature dependence of biomolecular LLPS has been studied extensively, indicating that phase-separated condensed states of proteins can be stabilized or destabilized by increasing temperature. In contrast, the physical and biological significance of hydrostatic pressure on LLPS is less appreciated. Summarized here are recent investigations of protein LLPS under pressures up to the kbar-regime. Strikingly, for the cases studied thus far, LLPSs of both globular proteins and intrinsically disordered proteins/regions are typically more sensitive to pressure than the folding of proteins, suggesting that organisms inhabiting the deep sea and sub-seafloor sediments, under pressures up to 1 kbar and beyond, have to mitigate this pressure-sensitivity to avoid unwanted destabilization of their functional biomolecular condensates. Interestingly, we found that trimethylamine-N-oxide (TMAO), an osmolyte upregulated in deep-sea fish, can significantly stabilize protein droplets under pressure, pointing to another adaptive advantage for increased TMAO concentrations in deep-sea organisms besides the osmolyte's stabilizing effect against protein unfolding. As life on Earth might have originated in the deep sea, pressure-dependent LLPS is pertinent to questions regarding prebiotic proto-cells. Herein, we offer a conceptual framework for rationalizing the recent experimental findings and present an outline of the basic thermodynamics of temperature-, pressure-, and osmolyte-dependent LLPS as well as a molecular-level statistical mechanics picture in terms of solvent-mediated interactions and void volumes.

Evolution of Interactions in the Protein Solution As Induced by Mono and Multivalent Ions

The evolution of interactions in the bovine serum albumin (BSA) protein solution on addition of mono and multivalent (di, tri and tetra) counterions has been studied using small-angle neutron scattering (SANS), dynamic light scattering (DLS) and ζ-potential measurements. It is found that in the presence of mono and divalent counterions, protein behavior can be well explained by DLVO theory, combining the contributions of screened Coulomb repulsion with the van der Waals attraction. The addition of mono or divalent salts in protein solution reduces the repulsive barrier and hence the overall interaction becomes attractive, but the system remains in one-phase for the entire concentration range of the salts, added in the system. However, contrary to DLVO theory, the protein solution undergoes a reentrant phase transition from one-phase to a two-phase system and then back to the one-phase system in the presence of tri and tetravalent counterions. The results show that tri and tetravalent (unlike mono and divalent) counterions induce short-range attraction between the protein molecules, leading to the transformation from one-phase to two-phase system. The two-phase is characterized by the fractal structure of protein aggregates. The excess condensation of these higher-valent counterions in the double layer around the BSA causes the reversal of charge of the protein molecules resulting into reentrant of the one-phase, at higher salt concentrations. The complete phase behavior with mono and multivalent ions has been explained in terms of the interplay of electrostatic repulsion and ion-induced short-range attraction between the protein molecules.

Reentrant Phase Behavior in Protein Solutions Induced by Multivalent Salts: Strong Effect of Anions Cl- Versus NO3

In this work, the effects of the two anions Cl^- and NO₃^- on the phase behavior of bovine serum albumin (BSA) in solution with trivalent salts are compared systematically. In the presence of trivalent metal salts, negatively charged proteins such as BSA in solution undergo a reentrant condensation (RC) phase behavior, which has been established for several proteins with chlorides of trivalent salts. Here, we show that replacing Cl^- by NO₃^- leads to a marked change in the phase behavior. The effect is investigated for the two different cations Y³⁺ and La³⁺. The salts are thus YCl₃, Y(NO₃)₃, LaCl₃, and La(NO₃)₃. The experimental phase behavior shows that while the chloride salts induce both liquid-liquid phase separation (LLPS) and RC, the nitrate salts also induce LLPS, but RC becomes partial with La(NO₃)₃ and disappears with Y(NO₃)₃. The observed phase behavior is rationalized by effective protein-protein interactions which are characterized using small-angle X-ray scattering. The results based on the reduced second virial coefficients B₂/ B₂^HS and 1/ I( q → 0) demonstrate that the NO₃^- salts induce a stronger attraction than the Cl^- salts. Overall, the effective attraction, the width of the condensed regime in the RC phase diagram, and the nature of LLPS follow the order LaCl₃ < YCl₃ < La(NO₃)₃ < Y(NO₃)₃. Despite the decisive role of cations in RC phase behavior, isothermal titration calorimetry measurements indicate that replacing anions does not significantly influence the cation binding to proteins. The experimental results observed are discussed based on an "enhanced Hofmeister effect" including electrostatic and hydrophobic interactions between protein-cation complexes.

A methodology to calculate small-angle scattering profiles of macromolecular solutions from molecular simulations in the grand-canonical ensemble

The theoretical framework to evaluate small-angle scattering (SAS) profiles for multi-component macromolecular solutions is re-examined from the standpoint of molecular simulations in the grand-canonical ensemble, where the chemical potentials of all species in solution are fixed. This statistical mechanical ensemble resembles more closely scattering experiments, capturing concentration fluctuations that arise from the exchange of molecules between the scattering volume and the bulk solution. The resulting grand-canonical expression relates scattering intensities to the different intra- and intermolecular pair distribution functions, as well as to the distribution of molecular concentrations on the scattering volume. This formulation represents a generalized expression that encompasses most of the existing methods to evaluate SAS profiles from molecular simulations. The grand-canonical SAS methodology is probed for a series of different implicit-solvent, homogeneous systems at conditions ranging from dilute to concentrated. These systems consist of spherical colloids, dumbbell particles, and highly flexible polymer chains. Comparison of the resulting SAS curves against classical methodologies based on either theoretical approaches or canonical simulations (i.e., at a fixed number of molecules) shows equivalence between the different scattering intensities so long as interactions between molecules are net repulsive or weakly attractive. On the other hand, for strongly attractive interactions, grand-canonical SAS profiles deviate in the low- and intermediate-q range from those calculated in a canonical ensemble. Such differences are due to the distribution of molecules becoming asymmetric, which yields a higher contribution from configurations with molecular concentrations larger than the nominal value. Additionally, for flexible systems, explicit discrimination between intra- and inter-molecular SAS contributions permits the implementation of model-free, structural analysis such as Guinier's plots at high molecular concentrations, beyond what the traditional limits are for such analysis.

Unfolding and Refolding of Protein by a Combination of Ionic and Nonionic Surfactants

The interaction of protein and surfactant yields protein-surfactant complexes which have a wide range of applications in the cosmetics, foods, and pharmaceutical industries among others. Ionic and nonionic surfactants are known to interact differently with the protein. The interplay of electrostatic and hydrophobic interactions governs the resultant structure of protein-surfactant complexes. The present study enlightens the paramount role of the hydrophobic interaction, tuned by the hydrophobic tail length of ionic surfactants, in the unfolding of anionic bovine serum albumin (BSA) protein. The unfolding of BSA in the presence of four different tail-length cationic surfactants, that is, C10TAB, C12TAB, C14TAB, and C16TAB, has been investigated by small-angle neutron scattering and dynamic light scattering. All cationic surfactants unfold the protein at a certain concentration range. The propensity of protein unfolding increases with increasing the hydrophobic tail length. The denatured structure of BSA upon addition of cationic surfactants is characterized by the random flight model representing a beads-on-a-string chain-like complex. The unfolded protein binds the surfactant micelles in the protein-surfactant cluster. The micelles get elongated with the increasing concentration of cationic surfactants, whereas the number of micelles per cluster is decreased. In the final stage, the protein-surfactant cluster merges to one large micelle with unfolded protein wrapping the micelle surface. The pathway of protein unfolding is described in terms of the changes in the micellar size, the number of micelles formed per cluster, the separation between the micelles in the cluster, the aggregation number of micelles, and the number of proteins per cluster. The protein-surfactant interaction is further examined in the presence of a nonionic surfactant, that is, C12E10. The nonionic surfactant significantly suppresses the interaction of BSA protein with ionic surfactants by forming mixed micelles. As a result of the mixed micelles formation by ionic-nonionic surfactants, the ionic surfactant moves out from the unfolded BSA protein, and this enables the protein to refold back to its native structure. The propensity of mixed micelle-driven refolding of proteins is significantly changed with changing the tail length of the ionic surfactant.

Biological small-angle neutron scattering: recent results and development

Small-angle neutron scattering (SANS) has increasingly been used by the structural biology community in recent years to obtain low-resolution information on solubilized biomacromolecular complexes in solution. In combination with deuterium labelling and solvent-contrast variation (H2O/D2O exchange), SANS provides unique information on individual components in large heterogeneous complexes that is perfectly complementary to the structural restraints provided by crystallography, nuclear magnetic resonance and electron microscopy. Typical systems studied include multi-protein or protein–DNA/RNA complexes and solubilized membrane proteins. The internal features of these systems are less accessible to the more broadly used small-angle X-ray scattering (SAXS) technique owing to a limited range of intra-complex and solvent electron-density variation. Here, the progress and developments of biological applications of SANS in the past decade are reviewed. The review covers scientific results from selected biological systems, including protein–protein complexes, protein–RNA/DNA complexes and membrane proteins. Moreover, an overview of recent developments in instruments, sample environment, deuterium labelling and software is presented. Finally, the perspectives for biological SANS in the context of integrated structural biology approaches are discussed.

Quantifying the influence of the ion cloud on SAXS profiles of charged proteins

MD simulations and Poisson–Boltzmann calculations predict ion cloud effects on SAXS experiments.

Small Angle Scattering and Structural Biology: Data Quality and Model Validation

This chapter provides a brief review of the current state-of-the-art in small-angle scattering (SAS) from biomolecules in solution in regard to: (1) sample preparation and instrumentation, (2) data reduction and analysis, and (3) three-dimensional structural modelling and validation. In this context, areas of ongoing research in regard to the interpretation of SAS data will be discussed with a particular focus on structural modelling using computational methods and data from different experimental techniques, including SAS (hybrid methods). Finally, progress made in establishing community accepted publication guidelines and a standard reporting framework that includes SAS data deposition in a public data bank will be described. Importantly, SAS data with associated meta-data can now be held in a format that supports exchange between data archives and seamless interoperability with the world-wide Protein Data Bank (wwPDB). Biomolecular SAS is thus well positioned to contribute to an envisioned federation of data archives in support of hybrid structural biology.

Nonclassical nucleation pathways in protein crystallization

Classical nucleation theory (CNT), which was established about 90 years ago, has been very successful in many research fields, and continues to be the most commonly used theory in describing the nucleation process. For a fluid-to-solid phase transition, CNT states that the solute molecules in a supersaturated solution reversibly form small clusters. Once the cluster size reaches a critical value, it becomes thermodynamically stable and favored for further growth. One of the most important assumptions of CNT is that the nucleation process is described by one reaction coordinate and all order parameters proceed simultaneously. Recent studies in experiments, computer simulations and theory have revealed nonclassical features in the early stage of nucleation. In particular, the decoupling of order parameters involved during a fluid-to-solid transition leads to the so-called two-step nucleation mechanism, in which a metastable intermediate phase (MIP) exists between the initial supersaturated solution and the final crystals. Depending on the exact free energy landscapes, the MIPs can be a high density liquid phase, mesoscopic clusters, or a pre-ordered state. In this review, we focus on the studies of nonclassical pathways in protein crystallization and discuss the applications of the various scenarios of two-step nucleation theory. In particular, we focus on protein solutions in the presence of multivalent salts, which serve as a model protein system to study the nucleation pathways. We wish to point out the unique features of proteins as model systems for further studies.

2017 publication guidelines for structural modelling of small-angle scattering data from biomolecules in solution: an update

In 2012, preliminary guidelines were published addressing sample quality, data acquisition and reduction, presentation of scattering data and validation, and modelling for biomolecular small-angle scattering (SAS) experiments. Biomolecular SAS has since continued to grow and authors have increasingly adopted the preliminary guidelines. In parallel, integrative/hybrid determination of biomolecular structures is a rapidly growing field that is expanding the scope of structural biology. For SAS to contribute maximally to this field, it is essential to ensure open access to the information required for evaluation of the quality of SAS samples and data, as well as the validity of SAS-based structural models. To this end, the preliminary guidelines for data presentation in a publication are reviewed and updated, and the deposition of data and associated models in a public archive is recommended. These guidelines and recommendations have been prepared in consultation with the members of the International Union of Crystallography (IUCr) Small-Angle Scattering and Journals Commissions, the Worldwide Protein Data Bank (wwPDB) Small-Angle Scattering Validation Task Force and additional experts in the field.

Tuning the solution organization of cationic polymers through interactions with bovine serum albumin

The interactions of bovine serum albumin (BSA) with aggregates of cationic polymers, i.e. quaternized poly(chloromethyl styrene) chains (QIm-PCMS), in aqueous solutions are investigated using small angle neutron scattering on length scales relevant to the size of BSA. The arrangement of the macromolecular chains within their aggregates is consistent with a blob description of overlapping chains that contain hydrophobic domains. The local conformations depend on the salt content as in typical linear polyelectrolytes. Although the hydrophobic content of the cationic polymers does not cause measurable local morphology differences, the interactions with BSA are enhanced in the case of the not fully quaternized polymer. The secondary structure of BSA is critically compromised by the interaction with the quaternized polymers as the signature of the alpha helix conformation is lost. The complexation with BSA and the resulting enhancement of interchain associations on higher length scales are verified using dynamic light scattering experiments. This study demonstrates the ability to tune the polyelectrolyte/protein interactions and polyelectrolyte chain-chain associations by modifying the hydrophobic content of the polyelectrolytes.

Hydrogen Bond Network of Water around Protein Investigated with Terahertz and Infrared Spectroscopy

The dynamical and structural properties of water at protein interfaces were characterized on the basis of the broadband complex dielectric constant (0.25 to 400 THz) of albumin aqueous solutions. Our analysis of the dielectric responses between 0.25 and 12 THz first revealed hydration water with retarded reorientational dynamics extending ∼8.5 Å (corresponding to three to four layers) out from the albumin surface. Second, the number of nonhydrogen-bonded water was decreased in the presence of the albumin solute, indicating protein inhibits the fragmentation of the water hydrogen-bond network. Finally, water molecules at the albumin interface were found to form a distorted hydrogen-bond structure due to topological and energetic disorder of the protein surface. In addition, the intramolecular O-H stretching vibration of water (∼100 THz), which is sensitive to hydrogen-bond environment, pointed to a trend that hydration water has a larger population of strongly hydrogen-bonded water molecules compared with that of bulk water. From these experimental results, we concluded that the "strengthened" water hydrogen bonds at the protein interface dynamically slow down the reorientational motion of water and form the less-defective hydrogen-bond network by inhibiting the fragmentation of water-water hydrogen bonds. Nevertheless, such a strengthened water hydrogen-bond network is composed of heterogeneous hydrogen-bond distances and angles, and thus characterized as structurally "distorted."

Nanoarmoring of Proteins by Conjugation to Block Copolymer Micelles

The creation of polymer nanoparticles with protein functionality is of great interest to many applications such as targeted drug or gene delivery, diagnostic imaging, cancer theranostics, delivery of protein therapeutics, sensing chemical and biomolecular analytes in complex environments, and design of protective clothing resembling a second skin. Many approaches to achieving this goal are being explored in the current literature. In this chapter, we describe a relatively simple and flexible approach of conjugating the protein to an amphiphilic block copolymer and creating polymer nanoparticles with protein functionality by taking advantage of the intrinsic self-assembly behavior of the amphiphilic block copolymer. The commercially available and biocompatible polyethylene oxide-polypropylene oxide-polyethylene oxide triblock copolymer is used as the polymer building block. For demonstrative purposes, bovine serum albumin was chosen as the protein. We determine the molecular weight of the protein-polymer conjugate and thereby the degree of conjugation using sodium dodecyl sulfate-polyacrylamide gel electrophoresis and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry measurements. Retention of protein secondary structure in the conjugate was determined by circular dichroism spectroscopy, and the biological activity of the protein in the conjugated state has been evaluated by kinetic assay involving hydrolysis of an organophosphate compound. Dynamic light scattering and zeta potential measurements were used to characterize the size and charge of the protein-polymer conjugate micelle. Precise control of the size of the micelle and surface number density of the proteins on the micelle surface by coassembling with a second block copolymer have been demonstrated. These studies document a rational approach to armor the protein by conjugation with a block copolymer micelle, as a general approach.