Boosting Oxygen Reduction at Pt(111)|Proton Exchange Ionomer Interfaces through Tuning the Microenvironment Water Activity

A proton exchange ionomer is one of the most important components in membrane electrode assemblies (MEAs) of polymer electrolyte membrane fuel cells (PEMFCs). It acts as both a proton conductor and a binder for nanocatalysts and carbon supports. The structure and the wetting conditions of the MEAs have a great impact on the microenvironment at the three-phase interphases in the MEAs, which can significantly influence the electrode kinetics such as the oxygen reduction reaction (ORR) at the cathode. Herein, by using the Pt(111)|X ionomer interface as a model system (X = Nafion, Aciplex, D72), we find that higher drying temperature lowers the onset potential for sulfonate adsorption and reduces apparent ORR current, while the current wave for OHad formation drops and shifts positively. Surprisingly, the intrinsic ORR activity is higher after properly correcting the blocking effect of Pt active sites by sulfonate adsorption and the poly(tetrafluoroethylene) (PTFE) skeleton. These results are well explained by the reduced water activity at the interfaces induced by the ionomer/PTFE, according to the mixed potential effect. Implications for how to prepare MEAs with improved ORR activity are provided.

The electrostatic effect and its role in promoting electrocatalytic reactions by specifically adsorbed anions

The adsorption of anions and its impact on electrocatalytic reactions are fundamental topics in electrocatalysis. Previous studies revealed that adsorbed anions display an overall poisoning effect in most cases. However, for a few reactions such as the hydrogen evolution reaction (HER), oxidation of small organic molecules (SOMs), and reduction of CO₂ and O₂, some specifically adsorbed anions can promote their reaction kinetics under certain conditions. The promotion effect is frequently attributed to the adsorbate induced modification of the nature of the active sites, the change of the adsorption configuration and free energy of the key reactive intermediate which consequently change the activation energy, the pre-exponential factor of the rate determining step etc. In this paper, we will give a mini review of the indispensable role of the classical double layer effect in enhancing the kinetics of electrocatalytic reactions by anion adsorption. The ubiquitous electrostatic interactions change both the potential distribution and the concentration distribution of ionic species across the electric double layer (EDL), which alters the electrochemical driving force and effective concentration of the reactants. The contribution to the overall kinetics is highlighted by taking HER, oxidation of SOMs, reduction of CO₂ and O₂, as examples.

Ab Initio Simulations of Water/Metal Interfaces

Structures and processes at water/metal interfaces play an important technological role in electrochemical energy conversion and storage, photoconversion, sensors, and corrosion, just to name a few. However, they are also of fundamental significance as a model system for the study of solid-liquid interfaces, which requires combining concepts from the chemistry and physics of crystalline materials and liquids. Particularly interesting is the fact that the water-water and water-metal interactions are of similar strength so that the structures at water/metal interfaces result from a competition between these comparable interactions. Because water is a polar molecule and water and metal surfaces are both polarizable, explicit consideration of the electronic degrees of freedom at water/metal interfaces is mandatory. In principle, ab initio molecular dynamics simulations are thus the method of choice to model water/metal interfaces, but they are computationally still rather demanding. Here, ab initio simulations of water/metal interfaces will be reviewed, starting from static systems such as the adsorption of single water molecules, water clusters, and icelike layers, followed by the properties of liquid water layers at metal surfaces. Technical issues such as the appropriate first-principles description of the water-water and water-metal interactions will be discussed, and electrochemical aspects will be addressed. Finally, more approximate but numerically less demanding approaches to treat water at metal surfaces from first-principles will be briefly discussed.

Quantification of Hydride Coverage on Cu(111) by Electrochemical Mass Spectrometry

Electrochemical mass spectrometry (EC-MS) is combined with chronoamperometry to quantify H coverage associated with the surface hydride phase on Cu(111) in 0.1 mol/L H2SO4. A two-step potential pulse program is used to examine anion desorption and hydride formation, and the inverse, by tracking the 2 atomic mass unit (amu) signal for H2 production in comparison to the charge passed. On the negative potential step, the reduction current is partitioned between anion desorption, hydride formation, and the hydrogen evolution reaction (HER). For modest overpotentials, variations in partial processes are evident as inflections in the chronoamperometry and EC-MS signal. On the return step to positive potentials, hydride decomposition by H recombination to H2 occurs in parallel with sulfate adsorption. The challenge associated with the inherent diffusional delay in the EC-MS response is mitigated by total H2 collection and steady-state analysis facilitated by the thin-layer EC-MS cell geometry as demonstrated for the HER on a non-hydride forming Ag electrode. Analysis of the respective transients and steady-state response on Cu(111) reveals a saturated hydride fractional coverage of 0.67 at negative potentials with an upper bound charge of 106 μC/cm2 (average electrosorption valency of ≈1.76) associated with adsorption of the (√ 3 × √ 7 ) mixed sulfate-water adlayer at positive potentials.

Sulfate, Bisulfate, and Hydrogen Co-adsorption on Pt(111) and Au(111) in an Electrochemical Environment

The co-adsorption of sulfate, bisulfate and hydrogen on Pt(111) and Au(111) electrodes was studied based on periodic density functional calculations with the aqueous electrolyte represented by both explicit and implicit solvent models. The influence of the electrochemical control parameters such as the electrode potential and pH was taken into account in a grand-canonical approach. Thus, phase diagrams of the stable coadsorption phases as a function of the electrochemical potential and Pourbaix diagrams have been derived which well reproduce experimental findings. We demonstrate that it is necessary to include explicit water molecules in order to determine the stable adsorbate phases as the (bi)sulfate adsorbates rows become significantly stabilized by bridging water molecules.

Effects of Sulfate on the Oxygen Reduction Reaction Activity on Stabilized Pt Skin/PtCo Alloy Catalysts from 30 to 80 °C

The effects of the concentration of H₂SO₄ ([H₂SO₄]), which is the major decomposition product of polymer electrolyte membranes during the operation of fuel cells, on the performance of stabilized Pt skin/PtCo alloy nanocatalysts supported on high-surface-area carbon (Pt_xAL-PtCo/C) were investigated. Kinetically controlled activities for the oxygen reduction reaction (ORR) and the H₂O₂ yields ( P(H₂O₂)) on the Pt_xAL-PtCo/C were examined based on hydrodynamic voltammograms in O₂-saturated 0.1 M HClO₄ + X M H₂SO₄ ( X = 0 to 5 × 10^-2) by use of the channel flow double electrode method at temperatures between 30 and 80 °C. At X ≤ 10^-6 (1 μM) and all temperatures examined, the apparent ORR rate constants k_app@0.85 V (per unit electrochemically active surface area) on Pt_xAL-PtCo/C at 0.85 V vs the reversible hydrogen electrode (RHE) were nearly identical with those in sulfate-free 0.1 M HClO₄ and were at least twice as high as those on a commercial Pt/C catalyst (c-Pt/C). The values of k_app@0.85 V on both Pt_xAL-PtCo/C and c-Pt/C decreased linearly with log[H₂SO₄] in the concentration range 10^-6 < X ≤ 5 × 10^-2. The detrimental effect by H₂SO₄ was less pronounced on Pt_xAL-PtCo/C than on c-Pt/C at high temperatures; the k_app@0.85 V value at X = 5 × 10^-2 on the former at 80 °C was maintained as high as 87%, whereas that of the latter was 66% (34% loss). The values of peroxide production percentage P(H₂O₂) on Pt_xAL-PtCo/C at 80 °C were nearly constant (ca. 0.22% at 0.76 V vs RHE) up to X = 5 × 10^-2. These superior characteristics are ascribed to weakened adsorption of sulfate on the Pt skin surface, supported by DFT calculations, which provides the great advantage of robustness in the presence of impurities, maintaining active sites for the ORR during the PEFC operation.

Molecular-Scale Structure of Electrode-Electrolyte Interfaces: The Case of Platinum in Aqueous Sulfuric Acid

Knowledge of the molecular composition and electronic structure of electrified solid-liquid interfaces is key to understanding elemental processes in heterogeneous reactions. Using X-ray absorption spectroscopy in the interface-sensitive electron yield mode (EY-XAS), first-principles electronic structure calculations, and multiscale simulations, we determined the chemical composition of the interfacial region of a polycrystalline platinum electrode in contact with aqueous sulfuric acid solution at potentials between the hydrogen and oxygen evolution reactions. We found that between 0.7 and 1.3 V vs Ag/AgCl the electrical double layer (EDL) region comprises adsorbed sulfate ions with hydrated hydronium ions in the next layer. No evidence was found for bisulfate or Pt-O/Pt-OH species, which have very distinctive spectral signatures. In addition to resolving the long-standing issue of the EDL structure, our work establishes interface- and element-sensitive EY-XAS as a powerful spectroscopic tool for studying condensed phase, buried solid-liquid interfaces relevant to various electrochemical processes and devices.

Non-covalent interactions at electrochemical interfaces: one model fits all?

The shift with increasing concentration of alkali-metal cations of the potentials of both the spike and the hump observed in the cyclic voltammograms of Pt(111) electrodes in sulfuric acid solutions is shown to obey the simple model recently developed by us to explain the effect of non-covalent interactions at the electrical double layer. The results suggest that the model, originally developed to describe the effect of alkali-metal cations on the cyclic voltammogram of cyanide-modified Pt(111) electrodes, is of general applicability and can explain quantitatively the effect of cations on the properties of the electrical double layer.