Advanced nanoparticle generation and excitation by lasers in liquids

Understanding mono- and bi-metallic Au and Ni nanoparticle responses to fast heating

Nanoparticle assembly, alloying and fragmentation are fundamental processes with significant implications in various fields such as catalysis, materials science, and nanotechnology. Understanding these processes under fast heating conditions is crucial for tailoring nanoparticle properties and optimizing their applications. For this, we employ molecular dynamics simulations to obtain atomic-level insights into nanoparticle behavior. The performed simulations reveal intricate details of sintering, alloying and fragmentation mechanisms shedding light on the underlying physical phenomena governing these processes. The calculation results help to visualize nanoparticle evolution upon undercritical and supercritical heating elucidating not only the role of temperature, but also of nanoparticle sizes and composition. In particular, it is shown that surface tension and surface energy play important roles not only in nanoparticle melting but also in its fragmentation. When the added energy exceeds a critical threshold, the nanoparticle begins to experience alternating compression and expansion. If the tensile stress surpasses the material's strength limit, fragmentation becomes prominent. For very small particles (with radius smaller than ∼10 nm), this occurs more rapidly, whereas sub-nano-cavitation precedes the final fragmentation in larger particles, which behave more like droplets. Interestingly, this effect depends on composition in the case of AuNi alloy nanoparticles, as expected from the phase diagrams and excess energy. The heating level required to overcome the mixing barrier is also determined and is shown to play an important role in the evolution of AuNi nanoparticles, in addition to their size. Furthermore, our findings provide insights into controlling nanoparticle synthesis for various applications in numerous nanotechnological domains, such as catalysis, sensors, material analysis, as well as deseas diagnostics and treatment. This study bridges the gap between experimental observations and theoretical predictions paving the way for designing advanced nanomaterials with enhanced functionalities.

Silver Nanoparticles: Synthesis, Structure, Properties and Applications

Silver nanoparticles (Ag NPs) have accumulated significant interest due to their exceptional physicochemical properties and remarkable applications in biomedicine, electronics, and catalysis sensing. This comprehensive review provides an in-depth study of synthetic approaches such as biological synthesis, chemical synthesis, and physical synthesis with a detailed overview of their sub-methodologies, highlighting advantages and disadvantages. Additionally, structural properties affected by synthesis methods are discussed in detail by examining the dimensions and surface morphology. The review explores the distinctive properties of Ag NPs, including optical, electrical, catalytic, and antimicrobial properties, which render them beneficial for a range of applications. Furthermore, this review describes the diverse applications in several fields, such as medicine, environmental science, electronics, and optoelectronics. However, with numerous applications, several kinds of issues still exist. Future attempts need to address difficulties regarding synthetic techniques, environmental friendliness, and affordability. In order to ensure the secure utilization of Ag NPs, it is necessary to establish sustainability in synthetic techniques and eco-friendly production methods. This review aims to give a comprehensive overview of the synthesis, structural analysis, properties, and multifaceted applications of Ag NPs.

Femtosecond laser ablation in liquid synthesis of iron-oxidation nanoparticles with saturable absorption performance

"Naked" ferroferric-oxide nanoparticles (FONPs) synthesized by a femtosecond laser ablation on a bulk stainless steel in liquid were applied to the Nd: YVO₄ laser to achieve passive Q-switched pulse laser output. Without the pollution of ligand, the inherent light characteristic of "naked" FONPs was unaffected. The analysis of the morphological characteristics, dominant chemical elements, and phase composition of the FONPs showed that they were mainly composed of Fe₃O₄, which was spherical with an average diameter of 40 nm. The electron transition and orbital splitting of the iron element's octahedral center position under the laser-driven were considered the primary mechanisms of saturable absorption of Fe₃O₄ nanoparticles.

Impact of Plasmonic Nanoparticles on Poikilocytosis and Microrheological Properties of Erythrocytes

Plasmonic nanoparticles (NP) possess great potential in photothermal therapy and diagnostics. However, novel NP require a detailed examination for potential toxicity and peculiarities of interaction with cells. Red blood cells (RBC) are important for NP distribution and the development of hybrid RBC-NP delivery systems. This research explored RBC alterations induced by noble (Au and Ag) and nitride-based (TiN and ZrN) laser-synthesized plasmonic NP. Optical tweezers and conventional microscopy modalities indicated the effects arising at non-hemolytic levels, such as RBC poikilocytosis, and alterations in RBC microrheological parameters, elasticity and intercellular interactions. Aggregation and deformability significantly decreased for echinocytes independently of NP type, while for intact RBC, all NP except Ag NP increased the interaction forces but had no effect on RBC deformability. RBC poikilocytosis promoted by NP at concentration 50 μg mL-1 was more pronounced for Au and Ag NP, compared to TiN and ZrN NP. Nitride-based NP demonstrated better biocompatibility towards RBC and higher photothermal efficiency than their noble metal counterparts.

Engineering the Structural Defects of Spinel Oxide Nanoneedles by Doping of V for a Highly Efficient Oxygen Evolution Reaction

Rational design of multi-structural defects in the transition-metal oxides is a very alluring and challenging strategy to significantly improve its oxygen evolution reaction (OER) performance. Herein, a simple and promising element doping approach is demonstrated to fabricate a poor-crystalline V-doping CuCo2O4 (V-CuCo2O4) nanoneedle with rich oxygen vacancies (Vo), partially amorphous phase, and Co2+ defects on the carbon fiber (CF) (V-CuCo2O4/CF). The results indicate that the V doping could further weaken the crystallinity of V-CuCo2O4, providing the thoroughfares for the convenience of electrolyte penetration and the exposure of active sites. Meanwhile, [CoO6] octahedron in the V-CuCo2O4 lattice is gravely distorted due to a strong electronic interaction between the doped V and Co atoms, creating more Co2+ active species. With the merits of these multiple structural defects, V-CuCo2O4/CF exhibits rich active sites, and its intrinsically electrocatalytic activity is significantly enhanced. The optimized V-CuCo2O4/CF electrocatalyst has a significantly enhanced OER activity with a required low overpotential of ∼204 and ∼246 mV at a current density of 100 and 300 mA cm-2, respectively, a small Tafel slope of 40.7 mV dec-1, and excellent stability in an alkaline medium. Furthermore, the results from the projected partial density of states calculation not only demonstrate that the 3-fol-coordinated Co near Vo bonded with Cu and V sites (Cu-Co(surf-Vo)-V) exhibits an enhanced electronic transfer activity but also reveal that the doped V could protect the Co sites from the deactivation by intermediates overbinding on the V sites. This work provides new insights into structure engineering of spinel phase copper cobaltite, resulting in significantly boosting electrocatalytic OER activity.

Silver Nanoparticles Produced by Laser Ablation and Re-Irradiation Are Effective Preventing Peri-Implantitis Multispecies Biofilm Formation

Implant-associated infection due to biofilm formation is a growing problem. Given that silver nanoparticles (Ag-NPs) have shown antibacterial effects, our goal is to study their effect against multispecies biofilm involved in the development of peri-implantitis. To this purpose, Ag-NPs were synthesized by laser ablation in de-ionized water using two different lasers, leading to the production of colloidal suspensions. Subsequently, part of each suspension was subjected to irradiation one and three times with the same laser source with which it was obtained. Ag-NPs were immobilized on the surface of titanium discs and the resultant materials were compared with unmodified titanium coupons. Nanoparticles were physico-chemically analysed to determine their shape, crystallinity, chemical composition, and mean diameter. The materials were incubated for 90 min or 48 h, to evaluate bacterial adhesion or biofilm formation respectively with Staphylococcus aureus or oral mixed bacterial flora composed of Streptococcus oralis, Actinomyces naeslundii, Veionella dispar, and Porphyromonas gingivalis. Ag-NPs help prevent the formation of biofilms both by S. aureus and by mixed oral bacterial flora. Nanoparticles re-irradiated three times showed the biggest antimicrobial effects. Modifying dental implants in this way could prevent the development of peri-implantitis.

Synthesis of Graphene-Based Nanocomposites for Environmental Remediation Applications: A Review

The term graphene was coined using the prefix "graph" taken from graphite and the suffix "-ene" for the C=C bond, by Boehm et al. in 1986. The synthesis of graphene can be done using various methods. The synthesized graphene was further oxidized to graphene oxide (GO) using different methods, to enhance its multitude of applications. Graphene oxide (GO) is the oxidized analogy of graphene, familiar as the only intermediate or precursor for obtaining the latter at a large scale. Graphene oxide has recently obtained enormous popularity in the energy, environment, sensor, and biomedical fields and has been handsomely exploited for water purification membranes. GO is a unique class of mechanically robust, ultrathin, high flux, high-selectivity, and fouling-resistant separation membranes that provide opportunities to advance water desalination technologies. The facile synthesis of GO membranes opens the doors for ideal next-generation membranes as cost-effective and sustainable alternative to long existing thin-film composite membranes for water purification applications. Many types of GO-metal oxide nanocomposites have been used to eradicate the problem of metal ions, halomethanes, other organic pollutants, and different colors from water bodies, making water fit for further use. Furthermore, to enhance the applications of GO/metal oxide nanocomposites, they were deposited on polymeric membranes for water purification due to their relatively low-cost, clear pore-forming mechanism and higher flexibility compared to inorganic membranes. Along with other applications, using these nanocomposites in the preparation of membranes not only resulted in excellent fouling resistance but also could be a possible solution to overcome the trade-off between water permeability and solute selectivity. Hence, a GO/metal oxide nanocomposite could improve overall performance, including antibacterial properties, strength, roughness, pore size, and the surface hydrophilicity of the membrane. In this review, we highlight the structure and synthesis of graphene, as well as graphene oxide, and its decoration with a polymeric membrane for further applications.

A comprehensive review and outlook on the experimental techniques to investigate the complex dynamics of pulsed laser ablation in liquid for nanoparticle synthesis

Pulsed laser ablation in liquid (PLAL) has been established as one of the most efficient and impactful methods for producing pure and ligand-free nanoparticles (NPs). PLAL has successfully been utilized for the synthesis of metal NPs, semiconductor NPs, ceramic NPs, and even nanocomposites. A variety of NPs, including core-shell, nanocubes, nanorods, and many other complex structures, can be synthesized using PLAL. The versatility associated with PLAL has led to the synthesis of NPs that have found applications in the field of biomedicine, sensing technology, energy harvesting, and various industries. Despite all the aforementioned advantages, there has been an ambiguity in terms of conditions/parameters for the nanoparticle synthesis as reported by various research groups. This has led to a perception that PLAL provides little or no control over the properties of the synthesized NPs. The properties of the NPs are reliant on transient dynamics caused due to a high-intensity laser's interaction with the target material. To understand the process of nanoparticle synthesis and to control the properties of NPs, it is critical to understand the various processes that occur during PLAL. The investigation of PLAL is essential for understanding the dynamical processes involved. However, the investigation techniques employed to probe PLAL present their own set of difficulties, as high temporal as well as spatial resolution is a prerequisite to probe PLAL. Hence, the purpose of this Review is to understand the dynamical processes of PLAL and gain an insight into the various investigation techniques and their data interpretation. In addition to the current challenges, some ways of overcoming these challenges are also presented. The benefits of concurrent investigations with special emphasis on the simultaneous investigation by multiple techniques are summarized, and furthermore, a few examples are also provided to help the readers understand how the simultaneous investigation works.

Graphene Nanostructures by Pulsed Laser Ablation in Liquids: A Review

High-quality graphene has demonstrated remarkable mechanical, thermal, electronic, and optical properties. These features have paved the road for the introduction of graphene into numerous applications such as optoelectronics and energy devices, photodegradation, bioimaging, photodetectors, sensors, and biosensors. Due to this, graphene research has accelerated exponentially, with the aim of reaching a sustainable large-scale production process of high-quality graphene that can produce graphene-based technologies at an industrial scale. There exist numerous routes for graphene fabrication; however, pulsed laser ablation in liquids (PLAL) has emerged as a simple, fast, green, and environmentally friendly method as it does not require the use of toxic chemicals. Moreover, it does not involve the use of expensive vacuum chambers or clean rooms. However, the great advantage of PLAL is its ability to control the size, shape, and structure of the produced nanostructures through the choice of laser parameters and liquid used. Consequently, this review will focus on recent research on the synthesis of graphene nanosheets and graphene quantum dots via PLAL and the effect of experimental parameters such as laser wavelength, pulse width, pulse energy, repetition rate, irradiation time, and liquid media on the produced nanostructures. Moreover, it will discuss extended PLAL techniques which incorporate other methods into PLAL. Finally, different applications that utilize nanostructures produced by PLAL will be highlighted. We hope that this review will provide a useful guide for researchers to further develop the PLAL technique and the fabrication of graphene-based materials.

Palladium Nanoparticles Synthesized by Laser Ablation in Liquids for Antimicrobial Applications

Antibiotic resistance is a leading cause of death worldwide. In this paper, we explore new alternatives in the treatment of infections. Noble metal nanoparticles could help to mitigate this problem. In this work, palladium nanoparticles were synthesized by laser ablation in order to explore their antimicrobial capacity. To obtain palladium nanoparticles, a palladium plate immersed in water, or methanol, was ablated, using two pulsed lasers that emit radiation with wavelengths of 532 nm and 1064 nm, respectively. Pure Pd-NPs with crystalline microstructure and rounded shape were obtained. The nanoparticles’ size is more homogeneous if the laser wavelength is 532 nm, and it decreases when methanol is used as solvent, reaching mean diameters smaller than 6 nm. With the objective of studying antimicrobial activity against Staphylococcus aureus, the Pd-NPs were immobilized on the surface of titanium discs. The release of palladium ions was recorded during the first seven days, and the cytotoxicity of the immobilized NPs was also tested with L929 mouse fibroblast cell line. Palladium nanoparticles synthesized by means of the infrared laser in methanol showed a strong inhibitory effect on S. aureus and good cytocompatibility, with no toxic effect on fibroblast cells.

The Water-Based Synthesis of Platinum Nanoparticles Using KrF Excimer Laser Ablation

Our work presents, for the first time, a comprehensive study of the synthesis of fully metallic platinum nanoparticles (Pt-NPs) involving the ablation process in double distilled water using a KrF excimer laser. To obtain detailed information on Pt-NP morphology and optical properties, prepared colloids were characterized using High Resolution Scanning Transmission Electron Microscopy (HR-STEM) with advanced capabilities for Energy Dispersive X-ray Analysis (EDX), UV/Vis optical spectroscopy, and Direct Analysis in Real Time-Mass Spectrometry (DART-MS). The influence of the applied laser fluence and laser repetition rate (RR) values on the characteristics of the obtained Pt-NPs and the ablation process, respectively, were also analyzed. Spherical and spherical-like nanoparticles exhibiting aggregation were produced. The Pt-NP mean size values were between 2.2 ± 1.2 nm and 4.0 ± 1.0 nm, while their interplanar distance measurements showed a face-centered cubic (FFC) Pt lattice (111), as revealed by HR-STEM measurements, for all investigated samples. The smallest mean size of 2.2 nm of the Pt-NPs was obtained using a 2.3 J cm-2 laser fluence at a 10 Hz RR, and the narrowest size distribution of the NPs was obtained with a 2.3 J cm-2 laser fluence at a 40 Hz RR. A linear dependence of the Pt-NP diameters versus the laser repetition rate was found at a constant fluence of 2.3 J cm-2. The proposed eco-friendly synthesis route of Pt-NPs, because of its relative simplicity, has the potential for use in industrial production.

The effect of applied electric field on the micromorphology of Pt nanoparticles synthesized by laser ablation

In the present study, laser ablation technique (Nd:YAG) has been applied to synthesize platinum nanoparticles (NPs). Also, the effect of applied electric field on the physical, structural, and morphological properties of Pt NPs has been investigated during the nanosecond pulsed laser ablation of platinum. Based on the results extracted from TEM and scanning electron microscopy images, the formation of high percentage of NPs with spherical shape is demonstrated in all samples. The increase of applied electric field creates few rectangular, hexagonal, and rhombic NPs with the average size decreased from 20 to 9 nm. The significant influence of increasing electric field is also observed in UV-vis spectra by appearing the blue shift of the localized surface plasmon resonance peak. The UV-vis spectra also confirm the metallic nature of Pt NPs and the existence of inhomogeneous-sized particles and the coagulation of particle because of the long tail in higher wavelengths. In addition, atomic force microscopy images have been analyzed through MountainsMap Premium program and fractal dimension. As can be seen, increasing the applied electric field make the surface more irregular and the maximum value of D_f reveals the most irregular topography for sample with 50 V/cm electric field. Finally, the bending and stretching frequencies of the functional bending groups connected to the NPs surface have been characterized by Fourier transform infrared spectroscopy. Electrical field-assisted laser ablation in liquids method allows a better control of the size, morphology, structure, and chemical composition of nanoparticles.

A Review on the Use of Hybrid Nanofluid in a Solar Flat Plate and Parabolic Trough Collectors and Its Enhanced Collector Thermal Efficiency

Energy demand is high in all parts of the world, mostly in all industrial sectors. To meet the energy demand the fossil fuel is the only way. Due to rapid industrial growth and use of fossil fuel result in global warming and environmental pollution. Moreover, the limited availability of the fossil fuels, it is necessary to depend on the renewable energy sources. Promising renewable energy in the world is solar energy, which is available largely on the earth surface. The solar energy can be converted into thermal energy in the solar flat plate collector. The collector thermal efficiency is purely depends on the working fluid used in it. Most of the studies revealed that replacing the working fluid with high thermal conductivity fluids called as nanofluids and hybrid nanofluids can improve the collector thermal efficiency. Few decades back studies have been conducted with nanofluids in solar collectors. Currently the researchers are working on solar collectors for further improvement of its efficiency using hybrid nanofluids. In this review paper, we will discuss about the synthesis of hybrid nanoparticles, hybrid nanofluids, characterization, thermophysical properties, and application of hybrid nanofluids in solar flat plate collector under natural and forced circulation of fluid. The research gap in the solar collector is also discussed in this article. This paper also explains about the heat transfer capabilities of hybrid nanofluids especially used solar collectors.

Design and perspective of amorphous metal nanoparticles from laser synthesis and processing

Amorphous metal nanoparticles (A-NPs) have aroused great interest in their structural disordering nature and combined downsizing strategies (e.g. nanoscaling), both of which are beneficial for highly strengthened properties compared to their crystalline counterparts. Conventional synthesis strategies easily induce product contamination and/or size limitations, which largely narrow their applications. In recent years, laser ablation in liquid (LAL) and laser fragmentation in liquid (LFL) as "green" and scalable colloid synthesis methodologies have attracted extensive enthusiasm in the production of ultrapure crystalline NPs, while they also show promising potential for the production of A-NPs. Yet, the amorphization in such methods still lacks sufficient rules to follow regarding the formation mechanism and criteria. To that end, this article reviews amorphous metal oxide and carbide NPs from LAL and LFL in terms of NP types, liquid selection, target elements, laser parameters, and possible formation mechanism, all of which play a significant role in the competitive relationship between amorphization and crystallization. Furthermore, we provide the prospect of laser-generated metallic glass nanoparticles (MG-NPs) from MG targets. The current and potential applications of A-NPs are also discussed, categorized by the attractive application fields e.g. in catalysis and magnetism. The present work aims to give possible selection rules and perspective on the design of colloidal A-NPs as well as the synthesis criteria of MG-NPs from laser-based strategies.

MOF-derived PtCo/Co3O4 nanocomposites in carbonaceous matrices as high-performance ORR electrocatalysts synthesized via laser ablation techniques

ZIF-67-derived carbon-based bimetallic nanocomposites with reduced Pt-loading via laser ablation synthesis in solution (LASiS) as a superior electrocatalyst for oxygen reduction reaction (ORR).

Chemical and Laser Ablation Synthesis of Monometallic and Bimetallic Ni-Based Nanoparticles

The catalytic properties of nanoparticles depend on their size, shape and surface/defect structure, with the entire catalyst performance being governed by the corresponding distributions. Herein, we present two routes of mono- and bimetallic nanoparticle synthesis that enable control of the structural parameters, i.e., wet-chemical synthesis and laser ablation in liquid-phase. The latter is particularly suited to create defect-rich nanoparticles. Impregnation routes were applied to prepare Ni and NiCu nanoparticles, whereas nano- and femtosecond laser ablation in liquid-phase were employed to prepare Ni and NiAu nanoparticles. The effects of the Ni:Cu ratio in impregnation and of laser fluence and liquid-medium on laser ablation are discussed. The atomic structure and (surface) composition of the nanoparticles were characterized by electron microscopic (BF-TEM, DF-TEM, HRTEM) and spectroscopic/diffraction techniques (EDX, SAED, XPS, IR), complemented by theory (DFT). The chemically synthesized bimetallic NiCu nanoparticles initially had Cu-rich surfaces, which changed to Ni-rich upon reaction. For laser ablation, depending on conditions (fluence, type of liquid), highly defective, ordered, or core/shell-like nanoparticles were produced. The case studies highlight the specific benefits of each preparation method for catalyst synthesis and discuss the potential of nanoparticles produced by pulsed laser ablation for catalytic applications.

Laser-Based Synthesis of Au Nanoparticles for Optical Sensing of Glyphosate: A Preliminary Study

Nowadays, gold nanoparticles Au nanoparticles (AuNPs) capture great interest due to their chemical stability, optical properties and biocompatibility. The success of technologies based on the use of AuNPs implies the development of simple synthesis methods allowing, also, the fine control over their properties (shape, sizes, structure). Here, we present the AuNPs fabrication by nanosecond pulsed laser ablation in citrate-solution, that has the advantage of being a simple, economic and eco-sustainable method to fabricate colloidal solutions of NPs. We characterized the stability and the absorbance of the solutions by Ultraviolet-Visible (UV-Vis) spectroscopy and the morphology of the AuNPs by Transmission Electron Microscopy. In addition, we used the AuNPs solutions as colorimetric sensor to detect the amount of glyphosate in liquid. Indeed, glyphosate is one of the most widely used herbicides which intensive use represents a risk to human health. The glyphosate presence in the colloidal AuNPs solutions determines the aggregation of the AuNPs causing the change in the color of the solution. The variation of the optical properties of the colloidal solutions versus the concentration of glyphosate is studied.

Cytotoxicity of bismuth nanoparticles in the murine macrophage cell line RAW 264.7

A promising use of bismuth nanoparticles (BiNPs) for different biomedical applications leads to a search for the elucidation of their toxicity mechanisms, since toxicity studies are still at early stage. In the current study, cytotoxic effects of BiNPs produced by laser ablation in solution (LASiS) was investigated in the murine macrophage line RAW 264.7. The cells were exposed to 0.01-50 µg ml^-1 of BiNPs for 24 and 48 h and then cytotoxicity assays were performed. Decrease of MTT conversion to formazan and of cell attachment were observed with no effects on cell proliferation. No loss of membrane integrity or significant changes of ROS and RNS levels were observed in exposed cells. Foremost, increased phagocytic activity and DNA repair foci occurred for cells exposed to BiNPs. These effects are important findings that must be considered in the case of biomedical application of BiNPs, since inappropriate macrophages activation and inactivation may lead to immunotoxicity. Bismuth nanoparticles (BiNPs) produced by laser ablation in solution and stabilized with BSA decrease enzyme-dependent MTT conversion to formazan and increase phagocytic activity and DNA repair foci in murine macrophage line RAW 264.7 when exposed to 50 µg ml^-1. These effects are findings that should be considered in the case of biomedical application of BiNPs, since inappropriate macrophages activation and inactivation may lead to immunotoxicity.

Efficient Laser-Induced Construction of Oxygen-Vacancy Abundant Nano-ZnCo2 O4 /Porous Reduced Graphene Oxide Hybrids toward Exceptional Capacitive Lithium Storage

Recently, binary ZnCo₂ O₄ has drawn enormous attention for lithium-ion batteries (LIBs) as attractive anode owing to its large theoretical capacity and good environmental benignity. However, the modest electrical conductivity and serious volumetric effect/particle agglomeration over cycling hinder its extensive applications. To address the concerns, herein, a rapid laser-irradiation methodology is firstly devised toward efficient synthesis of oxygen-vacancy abundant nano-ZnCo₂ O₄ /porous reduced graphene oxide (rGO) hybrids as anodes for LIBs. The synergistic contributions from nano-dimensional ZnCo₂ O₄ with rich oxygen vacancies and flexible rGO guarantee abundant active sites, fast electron/ion transport, and robust structural stability, and inhibit the agglomeration of nanoscale ZnCo₂ O₄ , favoring for superb electrochemical lithium-storage performance. More encouragingly, the optimal L-ZCO@rGO-30 anode exhibits a large reversible capacity of ≈1053 mAh g^-1 at 0.05 A g^-1 , excellent cycling stability (≈746 mAh g^-1 at 1.0 A g^-1 after 250 cycles), and preeminent rate capability (≈686 mAh g^-1 at 3.2 A g^-1 ). Further kinetic analysis corroborates that the capacitive-controlled process dominates the involved electrochemical reactions of hybrid anodes. More significantly, this rational design holds the promise of being extended for smart fabrication of other oxygen-vacancy abundant metal oxide/porous rGO hybrids toward advanced LIBs and beyond.

Effect of the Surface Chemical Composition and of Added Metal Cation Concentration on the Stability of Metal Nanoparticles Synthesized by Pulsed Laser Ablation in Water

Metal nanoparticles (NPs) made of gold, silver, and platinum have been synthesized by means of pulsed laser ablation in liquid aqueous solution. Independently from the metal nature, all NPs have an average diameter of 10 ± 5 nm. The ζ-potential values are: −62 ± 7 mV for gold, −44 ± 2 mV for silver and −58 ± 3 for platinum. XPS analysis demonstrates the absence of metal oxides in the case of gold and silver NPs. In the case of platinum NPs, 22% of the particle surface is ascribed to platinum oxidized species. This points to a marginal role of the metal oxides in building the negative charge that stabilizes these colloidal suspensions. The investigation of the colloidal stability of gold NPs in the presence of metal cations shows these NPs can be destabilized by trace amounts of selected metal ions. The case of Ag+ is paradigmatic since it is able to reduce the NP ζ-potential and to induce coagulation at concentrations as low as 3 μM, while in the case of K+ the critical coagulation concentration is around 8 mM. It is proposed that such a huge difference in destabilization power between monovalent cations can be accounted for by the difference in the reduction potential.

Surface Bubble Growth in Plasmonic Nanoparticle Suspension

Understanding the growth dynamics of the microbubbles produced by plasmonic heating can benefit a wide range of applications like microfluidics, catalysis, micropatterning, and photothermal energy conversion. Usually, surface plasmonic bubbles are generated on plasmonic structures predeposited on the surface subject to laser heating. In this work, we investigate the growth dynamics of surface microbubbles generated in plasmonic nanoparticle (NP) suspension. We observe much faster bubble growth rates compared to those in pure water with surface plasmonic structures. Our analyses show that the volumetric heating effect around the surface bubble due to the existence of NPs in the suspension is the key to explaining this difference. Such volumetric heating increases the temperature around the surface bubble more efficiently compared to surface heating which enhances the expelling of dissolved gas. We also find that the bubble growth rates can be tuned in a very wide range by changing the concentration of NPs, besides laser power and dissolved gas concentration.

A simple strategy for enhanced production of nanoparticles by laser ablation in liquids

Upgrading the productivity of nanoparticles (NPs), generated by pulsed laser ablation in liquid (PLAL), still remains challenging. Here a novel variant of PLAL was developed, where a doubled frequency Nd:YAG laser beam (532 nm, ∼5 ns, 10 Hz) at different fluences and for different times was directed into a sealed vessel, toward the interface of the meniscus of ethanol with a tilted bulk metal target. Palladium, copper and silver NPs, synthesized in the performed proof of concept experiments, were mass quantified, by inductively coupled plasma optical emission spectrometry, and characterized by ultraviolet-visible extinction spectroscopy, transmission electron microscopy and x-ray diffraction. The NPs consist of crystalline metals of a few nm size and their ablation rates and agglomeration levels depend on the employed laser fluences. The ensuing laser power-specific productivity curves for each metal, peaked at specific laser fluences, were fitted to the results of a simple model accounting for plasma absorption and heat transfer. The resulting peaked yields and concentrations were more than an order of magnitude higher than those obtained for totally immersed targets. Besides, the measured productivities showed nearly linear dependencies during time intervals up to 30 min of ablation, but became saturated at 1 h, due to accumulation of a significant number of NPs along the laser beam path, reducing the laser intensity reaching the target. The suggested approach that led to enhanced productivities and to generation of high concentrations of NPs in a single vessel could inspire future studies that will contribute to further developments of efficient generation of NPs with controlled characteristics.

Synthesis routes of CeO2 nanoparticles dedicated to organophosphorus degradation: a benchmark

Exposure to nerve agents, in military conflicts or terrorist acts, requires efficient decontamination systems. CeO₂ nanoparticles appear efficient against organophosphorus compounds, thus we performed a benchmark on the available synthesis routes.

Green and low-cost synthesis of zinc oxide nanoparticles and their application in transistor-based carbon monoxide sensing

There has been steady progress in developing reliable and cost-effective strategies for the clean production of zinc oxide (ZnO) nanoparticles (NPs) owing to their unique structural and wide functional characteristics. While the green synthesis of such NPs from plant extracts has emerged as a sustainable and eco-friendly protocol, it is greatly restricted owing to the scarcity of potential natural precursors necessitating comprehensive investigations in this direction. Herein, we report a facile, low-cost green synthesis and characterization of ZnO NPs along with the demonstration of their usage as an active media in organic field-effect transistor (OFET) devices for sensing carbon monoxide (CO) gas. The ZnO NPs obtained from Nelumbo nucifera (lotus) leaf extract-mediated solution combustion synthesis at a much lower initiation temperature, the first of its kind, were characterized by various techniques such as UV-vis spectroscopy, XRD, EDX analysis, TEM and FESEM. The data derived from these experiments clearly evidence the formation of very pure and crystalline ZnO NPs possessing nearly spherical-shape with a size of 3–4 nm. The p-type organic field-effect transistor (OFET) device, fabricated using poly(3-hexylthiophene-2,5-diyl) (P3HT) and ZnO NPs, showed a field-effect mobility of 10⁻² cm² V⁻¹ sec⁻¹ with a slightly enhanced response of detecting CO gas at room temperature (RT). The phenomenon was further confirmed by the variation in electrical parameters of the OFET such as field-effect mobility (μ), on-current (I_on), and off-current (I_off). The selectivity and sensitivity of the fabricated device in CO gas detection was found to be more prominent than the other reducing gases (hydrogen sulphide, H₂S and ammonia, NH₃) and methanol vapours tested.

An OFET-based CO gas sensor has been demonstrated where ZnO NPs realized by an inexpensive, environmentally friendly method have been employed as an active medium.

Doping nanoparticles using pulsed laser ablation in a liquid containing the doping agent

While doping of semiconductors or oxides is crucial for numerous technological applications, its control remains difficult especially when the material is reduced down to the nanometric scale. In this paper, we show that pulsed laser ablation of an undoped solid target in an aqueous solution containing activator ions offers a new way to synthesise doped-nanoparticles. The doping efficiency is evaluated for laser ablation of an undoped Gd₂O₃ target in aqueous solutions of EuCl₃ with molar concentration from 10^-5 mol L^-1 to 10^-3 mol L^-1. Thanks to luminescence experiments, we show that the europium ions penetrate the core of the synthesised monoclinic Gd₂O₃ nanoparticles. We also show that the concentration of the activators in the nanoparticles is proportional to the initial concentration in europium ions in the aqueous solution, and a doping of about 1% ([Eu]/[Gd] atomic ratio) is reached. On the one hand, this work could open new ways for the synthesis of doped nanomaterials. On the other hand, it also raises the question of undesired penetration of impurities in laser-generated nanoparticles in liquids.

Assessing the Surface Oxidation State of Free-Standing Gold Nanoparticles Produced by Laser Ablation

The surface chemistry of gold nanoparticles produced by the pulsed laser ablation in liquids method is investigated by X-ray photoelectron spectroscopy (XPS). The presence of surface oxide expected on these systems is investigated using synchrotron radiation in conditions close to their original state in solvent but free from substrate or solvent effects which could affect the interpretation of spectroscopic observations. For that purpose we performed the experiment on a controlled free-standing nanoparticle beam produced by combination of an atomizer and an aerodynamic lens system. These results are compared with those obtained by the standard situation of deposited nanoparticles on silicon substrate. An accurate analysis based on Bayesian statistics concludes that the existence of oxide in the free-standing conditions cannot be solely confirmed by the recorded core-level 4f spectra. If present, our data indicate an upper limit of 2.15 ± 0.68% of oxide. However, a higher credence to the hypothesis of its existence is brought by the structureless valence profile of the free-standing beam. Moreover, the cross-comparison with the deposited nanoparticles case clearly evidences an important misleading substrate effect. Experiment with free-standing nanoparticles is then demonstrated to be the right way to further investigate oxidation states on Au nanoparticles.

Size-Selected Submicron Gold Spheres: Controlled Assembly onto Metal, Carbon, and Plastic Substrates

Size-selected submicron spheres become very useful building blocks if the spheres could be synthesized and integrated at any desired position. In particular, spheres having a similar size to visible-light wavelength have attracted much attention. Here, we show the synthesis and assembly of size-selected submicron gold spheres using pulsed laser ablation of a gold plate in a supercritical fluid. Four findings were obtained in the study. Submicron spheres with a narrow size distribution were generated, and the polydispersity was ≈ 6%. The average diameter was controlled from 600 to 1000 nm. A thermodynamic condition for scalable synthesis was found. The assembly of spheres onto a metal, carbon, or plastic substrate was accomplished.

The Effect of Gold Nanoparticle Concentration and Laser Fluence on the Laser-Induced Water Decomposition

This Article covers the influence of the concentration of gold nanoparticles on laser-induced water decomposition. It was established that addition of gold nanoparticles intensifies laser-induced water decomposition by almost 2 orders of magnitude. The water decomposition rate was shown to be maximal at a nanoparticle concentration around 10¹⁰ NP/mL, whereas a decrease or increase of nanoparticle concentration leads to a decrease of water decomposition rate. It was demonstrated that, if the concentration of nanoparticles in water-based colloid was less than 10¹⁰ NP/mL, laser irradiation of the colloid caused formation of molecular hydrogen, hydrogen peroxide, and molecular oxygen. If the concentration of nanoparticles exceeded 10¹¹ NP/mL, only two products, molecular hydrogen and hydrogen peroxide, were formed. Correlations between the water decomposition rate and the main optical and acoustic parameters of optical breakdown-generated plasma were investigated. Variants of laser-induced decomposition of colloidal solutions of nanoparticles based on organic solvents (ethanol, propanol-2, butanol-2, diethyl ether) were also analyzed.

Nucleation and growth of gold nanoparticles initiated by nanosecond and femtosecond laser irradiation of aqueous [AuCl4]. Phys Chem Chem Phys 2018;20:28465-28475. [PMID: 30411753 PMCID: PMC6310131 DOI: 10.1039/c8cp05774e]

Irradiation of aqueous [AuCl4]- with 532 nm nanosecond (ns) laser pulses produces monodisperse (PDI = 0.04) 5 nm Au nanoparticles (AuNPs) without any additives or capping agents via a plasmon-enhanced photothermal autocatalytic mechanism. Compared with 800 nm femtosecond (fs) laser pulses, the AuNP growth kinetics under ns laser irradiation follow the same autocatalytic rate law, but with a significantly lower sensitivity to laser pulse energy. The results are explained using a simple model for simulating heat transfer in liquid water and at the interface with AuNPs. While the extent of water superheating with the ns laser is smaller compared to the fs laser, its significantly longer duration can provide sufficient energy to dissociate a small fraction of the [AuCl4]- present, resulting in the formation of AuNPs by coalescence of the resulting Au atoms. Irradiation of initially formed AuNPs at 532 nm results in plasmon-enhanced superheating of water, which greatly accelerates the rate of thermal dissociation of [AuCl4]- and accounts for the observed autocatalytic kinetics. The plasmon-enhanced heating under ns laser irradiation fragments the AuNPs and results in nearly uniform 5 nm particles, while the lack of particles' heating under fs laser irradiation results in the growth of the particles as large as 40 nm.

Effect of Eu doping concentration on fluorescence and magnetic resonance imaging properties of Gd2O3:Eu3+ nanoparticles used as dual-modal contrast agent

Europium-doped gadolinium oxide (Gd₂O₃:Eu³⁺) nanoparticles (NPs) with favorable properties for use in fluorescence imaging (FI) and magnetic resonance imaging (MRI) dual-modal contrast agent has attracted intense attention in biomedical applications. However, limited information is available on balancing FI and MRI by adjusting doping concentrations. In this study, Gd₂O₃:Eu³⁺ NPs with various Eu³⁺ doping concentrations were prepared by the facile and general technique of laser ablation in liquid (LAL). The influence of Eu³⁺-doping concentration on fluorescence properties and longitudinal relaxivity were investigated. The optimum Eu³⁺-doping concentration with both high fluorescence properties and longitudinal relaxivity was determined to be 5%. The characterization of the structure, morphology, and composition shows that these NPs possess good crystallinity and excellent dispersibility. These results show that Gd₂O₃:Eu³⁺ NPs prepared by LAL are promising candidates for highly efficient FI and MRI dual-modal contrast agents.

Dose-dependent cytotoxicity of bismuth nanoparticles produced by LASiS in a reference mammalian cell line BALB/c 3T3

Nanoparticles (NPs) have emerged as new potential tools for many applications in previous years. Among all types of NPs, bismuth NPs (BiNPs) have a very low cost and potential for many applications, ranging from medicine to industry. Although the toxic effects of bismuth have been studied, little is known about its toxicity at the nanoscale level. Therefore, in this study, we aimed to investigate the cytotoxic effects of BiNPs produced by laser ablation synthesis in solution (LASiS) in a reference mammalian cell line to evaluate their cytotoxicity (BALB/c 3 T3 cells). We also stabilized BiNPs in two different solutions: culture medium supplemented with fetal bovine serum (FBS) and bovine serum albumin (BSA). The cytotoxicity of BiNPs in culture medium (IC₅₀:28.51 ± 9.96 μg/ml) and in BSA (IC₅₀:25.54 ± 8.37 μg/ml) was assessed, and they were not significantly different. Second, the LD₅₀ was predicted, and BiNPs were estimated as GHS class 4. We also found that cell death occurs due to apoptosis. By evaluating the interaction between BiNPs and cells at ultrastructural level, we suggest that cell death occurs once BiNPs are internalized. Additionally, we suggest that BiNPs cause cell damage because myelin figures were found inside cells that had internalized BiNPs. To date, this is the first study to assess the cytotoxicity of BiNPs produced by LASiS and to predict the possible LD₅₀ and GHS class of BiNPs.

Oxygen-Vacancy Abundant Ultrafine Co3O4/Graphene Composites for High-Rate Supercapacitor Electrodes

The metal oxides/graphene composites are one of the most promising supercapacitors (SCs) electrode materials. However, rational synthesis of such electrode materials with controllable conductivity and electrochemical activity is the topical challenge for high-performance SCs. Here, the Co₃O₄/graphene composite is taken as a typical example and develops a novel/universal one-step laser irradiation method that overcomes all these challenges and obtains the oxygen-vacancy abundant ultrafine Co₃O₄ nanoparticles/graphene (UCNG) composites with high SCs performance. First-principles calculations show that the surface oxygen vacancies can facilitate the electrochemical charge transfer by creating midgap electronic states. The specific capacitance of the UCNG electrode reaches 978.1 F g^-1 (135.8 mA h g^-1) at the current densities of 1 A g^-1 and retains a high capacitance retention of 916.5 F g^-1 (127.3 mA h g^-1) even at current density up to 10 A g^-1, showing remarkable rate capability (more than 93.7% capacitance retention). Additionally, 99.3% of the initial capacitance is maintained after consecutive 20 000 cycles, demonstrating enhanced cycling stability. Moreover, this proposed laser-assisted growth strategy is demonstrated to be universal for other metal oxide/graphene composites with tuned electrical conductivity and electrochemical activity.

Catalysis by Metallic Nanoparticles in Solution: Thermosensitive Microgels as Nanoreactors

Metallic nanoparticles have been used as catalysts for various reactions, and the huge literature on the subject is hard to overlook. In many applications, the nanoparticles must be affixed to a colloidal carrier for easy handling during catalysis. These “passive carriers” (e.g. dendrimers) serve for a controlled synthesis of the nanoparticles and prevent coagulation during catalysis. Recently, hybrids from nanoparticles and polymers have been developed that allow us to change the catalytic activity of the nanoparticles by external triggers. In particular, single nanoparticles embedded in a thermosensitive network made from poly(N-isopropylacrylamide) (PNIPAM) have become the most-studied examples of such hybrids: immersed in cold water, the PNIPAM network is hydrophilic and fully swollen. In this state, hydrophilic substrates can diffuse easily through the network, and react at the surface of the nanoparticles. Above the volume transition located at 32°C, the network becomes hydrophobic and shrinks. Now hydrophobic substrates will preferably diffuse through the network and react with other substrates in the reaction catalyzed by the enclosed nanoparticle. Such “active carriers”, may thus be viewed as true nanoreactors that open new ways for the use of nanoparticles in catalysis. In this review, we give a survey on recent work done on these hybrids and their application in catalysis. The aim of this review is threefold: we first review hybrid systems composed of nanoparticles and thermosensitive networks and compare these “active carriers” to other colloidal and polymeric carriers (e.g. dendrimers). In a second step we discuss the model reactions used to obtain precise kinetic data on the catalytic activity of nanoparticles in various carriers and environments. These kinetic data allow us to present a fully quantitative comparison of different nanoreactors. In a final section we shall present the salient points of recent efforts in the theoretical modeling of these nanoreactors. By accounting for the presence of a free-energy landscape for the reactants’ diffusive approach towards the catalytic nanoparticle, arising from solvent-reactant and polymeric shell-reactant interactions, these models are capable of explaining the emergence of all the important features observed so far in studies of nanoreactors. The present survey also suggests that such models may be used for the design of future carrier systems adapted to a given reaction and solvent.

Si nanocrystal solution with stability for one year

Colloidal silicon nanocrystals (SiNCs) are a promising material for next-generation nanostructured devices. High-stability SiNC solutions are required for practical use as well as studies on the properties of SiNC. Here, we show a solution of SiNCs that was stable for one year without aggregation. The stable solution was synthesized by a facile process, i.e., pulsed laser ablation of a Si wafer in isopropyl alcohol (IPA). The long-term stability was due to a large ζ-potential of −50 mV from a SiNC passivation layer composed of oxygen, hydrogen, and alkane groups, according to the results of eight experiments and theoretical calculations. This passivation layer also resulted in good performance as an additive for a conductive polymer film. Namely, a 5-fold enhancement in carrier density was established by the addition of SiNCs into an organic conductive polymer, poly(3-dodecylthiophene), which is useful for solar cells. Furthermore, it was found that fresh (<1 day) and aged (4 months) SiNCs give the same enhancement. The long-term stability was attributed to a great repulsive energy in IPA, whose value was quantified as a function the distance between SiNCs.

A stable nanocrystal for one year without aggregation in a liquid is synthesized by one-step, one-pot, and one-hour process.

Photoluminescence of Functionalized Germanium Nanocrystals Embedded in Arsenic Sulfide Glass

Embedding metallic and semiconductor nanoparticles in a chalcogenide glass matrix effectively modifies the photonic properties. Such nanostructured materials could play an important role in optoelectronic devices, catalysis, and imaging applications. In this work, we fabricate and characterize germanium nanocrystals (Ge NCs) embedded in arsenic sulfide thin films by pulsed laser ablation in aliphatic amine solutions. Unstable surface termination of aliphatic groups and stable termination by amine on Ge NCs are indicated by Raman and Fourier-transform infrared spectroscopy measurements. A broad-band photoluminescence in the visible range is observed for the amine functionalized Ge NCs. A noticeable enhancement of fluorescence is observed for Ge NCs in arsenic sulfide, after annealing to remove the residual solvent of the glass matrix.