Trace Thiol Moieties in the Ligand Layer Induce Superior Catalytic Gold Nanoclusters

We here show that the typical poison of thiols, if below a certain level, promotes rather than suppresses the catalytic activity of gold nanoclusters (AuNCs). A few thiol groups functionalized hyperbranched polyethylenimine (PEI, Mn = 2000 Da) patched on a mesoporous polymeric bead aid the direct synthesis of AuNCs. The nucleation efficiency of AuNC is 93-fold favored at a level of 2 thiols per PEI (0.04 equiv of the amino units) than that by neat PEI, and AuNCs (1.3 nm) are obtained up to a gold load of 6.3% on the support. Unexpectedly, the catalytic activity of AuNCs is favored by the thiol up to 2 thiols per PEI, as evaluated from the surface-normalized rate constant of the model reaction of 4-nitrophenol-reduction. The catalytic promotion by thiols probably stems from optimized electron density on AuNC. If the residual NH groups of PEI were further fully treated with glycidyltrimethylammonium chloride, the catalytic activity is again enhanced, where the accelerated mass transfer is responsible for the promotion. Overall, the catalytic activity reaches an unprecedented value (metal-normalized rate constant kc = 29.4 L mmol-1 s-1 and turnover frequency = 1623 h-1, as evaluated with the model reaction of 4-nitrophenol reduction) ever reported for supported AuNCs. Our results suggest that orthogonal ligand optimization is an effective manner of triggering the release of the catalytic potential of AuNCs, among which thiol is unique.

In Situ Imaging of Catalytic Reactions on Tungsten Oxide Nanowires Connects Surface-Ligand Redox Chemistry with Photocatalytic Activity

Semiconductor nanocrystals are promising candidates for generating chemical feedstocks through photocatalysis. Understanding the role of ligands used to prepare colloidal nanocrystals in catalysis is challenging due to the complexity and heterogeneity of nanocrystal surfaces. We use in situ single-molecule fluorescence imaging to map the spatial distribution of active regions along individual tungsten oxide nanowires before and after functionalizing them with ascorbic acid. Rather than blocking active sites, we observed a significant enhancement in activity for photocatalytic water oxidation after treatment with ascorbic acid. While the initial nanowires contain inactive regions dispersed along their length, the functionalized nanowires show high uniformity in their photocatalytic activity. Spatial colocalization of the active regions with their surface chemical properties shows that oxidation of ascorbic acid during photocatalysis generates new oxygen vacancies along the nanowire surface. We demonstrate that controlling surface-ligand redox chemistry during photocatalysis can enhance the active site concentration on nanocrystal catalysts.

Catalyst overcoating engineering towards high-performance electrocatalysis

Clean and sustainable energy needs the development of advanced heterogeneous catalysts as they are of vital importance for electrochemical transformation reactions in renewable energy conversion and storage devices. Advances in nanoscience and material chemistry have afforded great opportunities for the design and optimization of nanostructured electrocatalysts with high efficiency and practical durability. In this review article, we specifically emphasize the synthetic methodologies for the versatile surface overcoating engineering reported to date for optimal electrocatalysts. We discuss the recent progress in the development of surface overcoating-derived electrocatalysts potentially applied in polymer electrolyte fuel cells and water electrolyzers by correlating catalyst intrinsic structures with electrocatalytic properties. Finally, we present the opportunities and perspectives of surface overcoating engineering for the design of advanced (electro)catalysts and their deep exploitation in a broad scope of applications.

Carbon Monoxide as a Promoter of Atomically Dispersed Platinum Catalyst in Electrochemical Hydrogen Evolution Reaction

Carbon monoxide is widely known to poison Pt during heterogeneous catalysis owing to its strong donor-acceptor binding ability. Herein, we report a counterintuitive phenomenon of this general paradigm when the size of Pt decreases to an atomic level, namely, the CO-promoting Pt electrocatalysis toward hydrogen evolution reactions (HER). Compared to pristine atomic Pt catalyst, reduction current on a CO-modified catalyst increases significantly. Operando mass spectroscopy and electrochemical analyses demonstrate that the increased current arises due to enhanced H₂ evolution, not additional CO reduction. Through structural identification of catalytic sites and computational analysis, we conclude that CO-ligation on the atomic Pt facilitates H_ads formation via water dissociation. This counterintuitive effect exemplifies the fully distinct characteristics of atomic Pt catalysts from those of bulk Pt, and offers new insights for tuning the activity of similar classes of catalysts.

Polyethyleneimine functionalized platinum superstructures: enhancing hydrogen evolution performance by morphological and interfacial control

The proton enrichment at an electrode/solution interface remarkably increases the onset reduction potential of the hydrogen evolution reaction.

The electrocatalytic hydrogen evolution reaction (HER) is a highly promising green method for sustainable and efficient hydrogen production. So far, Pt nanocrystals are still the most active electrocatalysts for the HER in acidic media, although a tremendous search for alternatives has been done in the past decade. In this work, we synthesize polyethyleneimine (PEI) functionalized Pt superstructures (Pt-SSs@PEI) with tetragonal, hierarchical, and branched morphologies with a facile wet chemical reduction method. A series of physical characterizations are conducted to investigate the morphology, electronic structure, surface composition, and formation mechanism of Pt-SSs@PEI. Impressively, the as-prepared Pt-SSs@PEI show an unprecedented onset reduction potential (+64.6 mV vs. reversible hydrogen electrode) for the HER in strong acidic media due to the protonation of –NH₂ groups in the PEI adlayers on the Pt surface, and they outperform all currently reported HER electrocatalysts. The work highlights a highly effective interface-engineering strategy for improving the electrocatalytic performance of Pt nanocrystals for the HER.

One-pot synthesis of single-crystal Pt nanoplates uniformly deposited on reduced graphene oxide, and their high activity and stability on the electrocalalytic oxidation of methanol

We demonstrate a one-pot thermoreduction approach towards the preparation of single-crystal Pt nanoplates, which were uniformly deposited on the reduced graphene oxide (RGO) using polyvinylpyrrolidone (PVP) as a stabilizer. The size of Pt nanoplates can be tuned from 6.8 to 10.1 nm by controlling Pt loading. The as-prepared Pt/PVP/RGO catalysts show high stability and activity towards the methanol oxidation reaction (MOR). Their MOR current can reach up to 401 mA mg(-1) Pt and MOR current can maintain 89.4% of its initial value after 10 000 potential cycles.

A one-pot gold seed-assisted synthesis of gold/platinum wire nanoassemblies and their enhanced electrocatalytic activity for the oxidation of oxalic acid

Three-dimensional (3D) noble metal nanoassemblies composed of one-dimensional (1D) nanowires have been attracting much interest due to the unique physical and chemical properties of 1D nanowires as well as the particular interconnected open-pore structure of 3D nanoassemblies. In this work, well-defined Au/Pt wire nanoassemblies were synthesized by using a facile NaBH4 reduction method in the presence of a branched form of polyethyleneimine (PEI). A study of the growth mechanism indicated the morphology of the final product to be highly related to the molecular structure of the polymeric amine. Also, the preferred Pt-on-Pt deposition contributed to the formation of the 1D Pt nanowires. The Au/Pt wire nanoassemblies were functionalized with PEI at the same time that these nanoassemblies were synthesized due to the strong N-Pt bond. The chemically functionalized Au/Pt wire nanoassemblies exhibited better electrocatalytic activity for the electro-oxidation of oxalic acid than did commercial Pt black.

Design of active and stable Co-Mo-Sx chalcogels as pH-universal catalysts for the hydrogen evolution reaction

Three of the fundamental catalytic limitations that have plagued the electrochemical production of hydrogen for decades still remain: low efficiency, short lifetime of catalysts and a lack of low-cost materials. Here, we address these three challenges by establishing and exploring an intimate functional link between the reactivity and stability of crystalline (CoS2 and MoS2) and amorphous (CoSx and MoSx) hydrogen evolution catalysts. We propose that Co(2+) and Mo(4+) centres promote the initial discharge of water (alkaline solutions) or hydronium ions (acid solutions). We establish that although CoSx materials are more active than MoSx they are also less stable, suggesting that the active sites are defects formed after dissolution of Co and Mo cations. By combining the higher activity of CoSx building blocks with the higher stability of MoSx units into a compact and robust CoMoSx chalcogel structure, we are able to design a low-cost alternative to noble metal catalysts for efficient electrocatalytic production of hydrogen in both alkaline and acidic environments.

Recent advancements in Pt and Pt-free catalysts for oxygen reduction reaction

Based on the understanding of the ORR catalytic mechanism, advanced Pt-based and Pt-free catalysts have been explored.

Kinetic Monte Carlo simulation of CO adsorption on sulfur-covered Pd(100)

The use of atomistic Kinetic Monte Carlo method was explored to examine the influence of sulfur poisoning on CO adsorption on Pd(100) surface. The model explicitly incorporates key elementary processes such as CO adsorption and CO desorption including diffusion of surface CO and S species. Relevant energetic and kinetic parameters were derived using information calculated from density functional theory as a starting point. Kinetic Monte Carlo simulation was performed to determine relevant observables such as CO saturation coverage as a function of amount of preadsorbed sulfur and to predict temperature programmed desorption spectra.

Highly branched platinum nanolance assemblies by polyallylamine functionalization as superior active, stable, and alcohol-tolerant oxygen reduction electrocatalysts

The chemical functionalization of platinum (Pt) nanostructures is becoming a new trend in electrocatalysts designs. Meanwhile, highly branched Pt nanostructures are highly exciting electrocatalysts with high activity and stability owing to their specific physical and chemical properties. In this work, the polyallylamine (PAH) functionalized Pt nanolance assemblies (Pt NLAs) have been successfully synthesized by chemical reduction of PAH-Pt(II) complex using formaldehyde (HCHO) in a two-phase water-complex system. The as-prepared Pt NLAs are highly branched and three-dimensionally (3D) interconnected nanostructures, which are composed of many long Pt nanolances in various directions. PAH functionalization improves the electrocatalytic activity of the Pt NLAs for an oxygen reduction reaction (ORR) because of high interface proton concentration on the Pt surface and excellent anti-oxidation ability of the Pt nanolances. Meanwhile, the PAH molecules bound on the Pt NLAs surface act as barrier networks to restrain accessibility of alcohol, exhibiting a high ORR selectivity. In addition, the PAH functionalized Pt NLAs show excellent durability for the ORR due to their particular 3D interconnected structure. The work demonstrates that the PAH functionalized Pt NLAs are indeed promising cathodic electrocatalysts for practical application in direct alcohol fuel cells.

Engineering nanointerfaces for nanocatalysis

We focus on recent advances in the delicate design of well-defined nanointerfaces to promote nanocatalysis towards renewable energy.

Tailoring the Electronic Structure of Nanoelectrocatalysts Induced by a Surface-Capping Organic Molecule for the Oxygen Reduction Reaction

Capping organic molecules, including oleylamine, strongly adsorbed onto Pt nanoparticles during preparation steps are considered undesirable species for the oxygen reduction reaction due to decreasing electrochemical active sites. However, we found that a small amount of oleylamine modified platinum nanoparticles showed significant enhancement of the electrochemical activity of the oxygen reduction reaction, even with the loss of the electrochemically active surface area. The enhancement was correlated with the downshift of the frontier d-band structure of platinum and the retardation of competitively adsorbed species. These results suggest that a capping organic molecule modified electrode can be a strategy to design an advanced electrocatalyst by modification of electronic structures.