Highlights on contemporary recognition and sensing of fluoride anion in solution and in the solid state

Selective fluoride sensing by a novel series of lanthanide-based one-dimensional coordination polymers through intramolecular proton transfer

A novel series of one-dimensional coordination polymers (CPs) is achieved via a facile one-pot synthesis strategy employing the nitrate salts of trivalent lanthanides, a pentadentate chelating ligand, and triphenylphosphine oxide at a controlled stoichiometry under ambient conditions. All the CPs are characterized comprehensively using spectroscopic, X-ray crystallographic and magnetometric studies. The CPs are found to be thermally stable up to a significantly high temperature and resistant to water for an indefinite time. They are photoactive and exhibit selective fluoride ion (F-) sensing with excellent efficiency both colorimetrically and fluorimetrically in the solid-state as well as in solution. The presence of F- concomitantly sensitizes the photoluminescence enhancement and visual decolourization of the CPs in solution owing to the ground-state intra-molecular proton transfer. The photophysical response of the CPs to F- in solution was found to be instantaneous (<30 s). The sensitivity of detection is observed to be significantly high over a wide range of F- concentrations, covering the beneficial and detrimental domains of F- concentrations in drinking water. The limit of detection (LoD) under ambient conditions was found to be in the micromolar (μM) range-the best being 0.22 μM found using UV-vis spectrometry and 7.5 μM using fluorimetry. In comparison, the USEPA standard cut-off for the upper limit of F- concentration in drinking water is 211 μM, and the LoD of measuring F- concentration using the USEPA standard method using a fluoride-selective electrode is 26.3 μM. The CPs display markedly high selectivity toward F- with negligible-to-no interference from the commonly abundant ions (Cl-, Br-, I-, CH3CO2-, CO32-, SO42-, HPO42-, NH4+, Na+, K+, Mg2+, and Ca2+) in terms of UV-vis spectral change. Moreover, they also exhibit solid-state IR-spectrometric sensitivity towards F- under ambient conditions.

New type of tin(IV) complex based turn-on fluorescent chemosensor for fluoride ion recognition: elucidating the effect of molecular structure on sensing property

A novel type of chemosensor based on tin(IV) complexes incorporating hydroxyquinoline derivatives has been designed and investigated for selectively detecting fluoride ions. Sn(meq)2Cl2 (meq = 2-methyl-8-quinolinol) (complex 1) exhibits a significant enhancement in luminescence upon the introduction of fluoride ions. This enhancement greatly surpasses that observed with Snq2Cl2 and Sn(dmqo)2Cl2 (q = 8-hydroxyquinnoline; dmqo = 5,7-dimethyl-8-quinolinol). Furthermore, complex 1 displays excellent sensitivity and selectivity for fluoride detection in comparison to halides and other anions. As a result, complex 1 serves as an outstanding turn-on fluorescent chemosensor, effectively sensing fluoride ions. The Benesi-Hilderbrand method and Job's plot confirmed that complex 1 associates with F- in a 1 : 2 binding stoichiometry. Also, complex 1 exhibited a large binding constant (pKb = 10.4 M-2) and a low detection limit (100 nM). To gain a deeper insight into the photophysical properties and the underlying mechanism governing the formation of the tin(IV) fluoride complex via halide exchange, we successfully synthesized partially fluorinated Sn(meq)2F0.67Cl1.33 (2) and fully fluorinated Sn(meq)2F2 (3), all of which were characterized through computational studies, thereby elucidating their photophysical properties. DFT studies reveal that converting Sn(meq)2Cl2 to Sn(meq)2F2, an endergonic process, leads to greater stability due to reducing steric hindrance about the metal center. Furthermore, the fluorinated complex significantly increases dipole moment, resulting in high affinity toward the F- ion.

Fluoride Ion Binding and Translocation in the CLCF Fluoride/Proton Antiporter: Molecular Insights from Combined Quantum-Mechanical/Molecular-Mechanical Modeling

CLCF fluoride/proton antiporters move fluoride ions out of bacterial cells, leading to fluoride resistance in these bacteria. However, many details about their operating mechanisms remain unclear. Here, we report a combined quantum-mechanical/molecular-mechanical (QM/MM) study of a CLCF homologue from Enterococci casseliflavus (Eca), in accord with the previously proposed windmill mechanism. Our multiscale modeling sheds light on two critical steps in the transport cycle: (i) the external gating residue E118 pushing a fluoride in the external binding site into the extracellular vestibule and (ii) an incoming fluoride reconquering the external binding site by forcing out E118. Both steps feature competitions for the external binding site between the negatively charged carboxylate of E118 and the fluoride. Remarkably, the displaced E118 by fluoride accepts a proton from the nearby R117, initiating the next transport cycle. We also demonstrate the importance of accurate quantum descriptions of fluoride solvation. Our results provide clues to the mysterious E318 residue near the central binding site, suggesting that the transport activities are unlikely to be disrupted by the glutamate interacting with a well-solvated fluoride at the central binding site. This differs significantly from the structurally similar CLC chloride/proton antiporters, where a fluoride trapped deep in the hydrophobic pore causes the transporter to be locked down. A free-energy barrier of 10-15 kcal/mol was estimated via umbrella sampling for a fluoride ion traveling through the pore to repopulate the external binding site.

Fluoride Transport and Inhibition Across CLC Transporters

The Chloride Channel (CLC) family includes proton-coupled chloride and fluoride transporters. Despite their similar protein architecture, the former exchange two chloride ions for each proton and are inhibited by fluoride, whereas the latter efficiently transport one fluoride in exchange for one proton. The combination of structural, mutagenesis, and functional experiments with molecular simulations has pinpointed several amino acid changes in the permeation pathway that capitalize on the different chemical properties of chloride and fluoride to fine-tune protein function. Here we summarize recent findings on fluoride inhibition and transport in the two prototypical members of the CLC family, the chloride/proton transporter from Escherichia coli (CLC-ec1) and the fluoride/proton transporter from Enterococcus casseliflavus (CLCF-eca).

Diphenylpyrrole-Strapped Calix[4]pyrrole Extractant for the Fluoride and Chloride Anions

The anion binding features of diphenylpyrrole-strapped calix[4]pyrrole 1 have been investigated by means of 1 H NMR spectroscopy and ITC (isothermal titration calorimetry), as well as single crystal X-ray diffraction analyses. Receptor 1 bearing an auxiliary pyrrolic NH donor and solubilizing phenyl groups on the strap was found to bind F- , Cl- , and Br- as their tetrabutylammonium salts with high affinity in DMSO-d6 . In addition, receptor 1 was found to extract the fluoride anion (as both its tetraethylammonium (TEA+ ) and tetrabutylammonium (TBA+ ) salts), as well as the chloride anion into chloroform-d from an aqueous source phase. Cation metathesis using TBAI or the use of a dual host approach involving crown ethers enabled receptor 1 to extract simple alkali metal fluoride or chloride salts from water. Quantitative binding of NaF by receptor 1 was observed in 20 % D2 O-DMSO-d6 allowing for the direct determination of the NaF concentration in an unknown sample.

Tannic Acid-Functionalized Silver Nanoparticles as Colorimetric Probe for the Simultaneous and Sensitive Detection of Aluminum(III) and Fluoride Ions

In this study, we employed tannic acid (TA)-functionalized silver nanoparticles (TA@AgNPs) as colorimetric probe for the simultaneous and sensitive detection of Al(III) and F- ions. The proposed sensor was based on the aggregation and anti-aggregation effects of target Al(III) and F- ions on TA@AgNPs, respectively. Because of the strong coordination bond between Al(III) ions and TA, the addition of Al(III) ions to TA@AgNPs could cause aggregation and, hence, result in a significant change in the absorption and color of the test solution. Interestingly, in the presence of F- ions, the aggregation effect of Al(III) ions on TA@AgNPs can be effectively prevented. The extent of aggregation and anti-aggregation effects was concentration-dependent and can be used for the quantitative detection of Al(III) and F- ions. The as-proposed sensor presented the sensitive detection of Al(III) and F ions with limits of detection (LOD) of 0.2 and 0.19 μM, respectively. In addition, the proposed sensor showed excellent applicability for the detection of Al(III) and F- ions in real water samples. Moreover, the sensing strategy offered a simple, rapid, and sensitive detection procedure and could be used as a potential alternative to conventional methods, which usually involve sophisticated instruments, complicated processes, and a long detection time.

Selective Recognition and Reversible “Turn-Off” Fluorescence Sensing of Acetate (CH3COO−) Anion at Ppb Level Using a Simple Quinizarin Fluorescent Dye

A simple and cost-effective optical sensing system based on quinizarin fluorescent dye (QZ) for the selective and reversible sensing of CH3COO− anions is reported. The anion binding affinity of QZ towards different anions was monitored using electronic absorption and fluorescence emission titration studies in DMSO. The UV-visible absorption spectrum of QZ showed a decrease in the intensity of the characteristic absorption peaks at λ = 280, 323, and 475 nm, while a new peak appeared at λ = 586 nm after the addition of CH3COO− anions. Similarly, the initial strong emission intensity of QZ was attenuated following titration with CH3COO− anions. Notably, similar titration using other anions, such as F−, Cl−, I−, NO3−, NO2−, and H2PO4-, caused no observable changes in both absorption and emission spectra. The selective sensing of CH3COO− anions was also reflected by a sharp visual color change from bright green to faint green under room light. Further, the binding was found to be reversible, and this makes QZ a potential optical and colorimetric sensor for selective, reversible, and ppb-level detection of CH3COO− anions in a DMSO medium.

Highly Luminescent Nucleoside-Based N, P-Doped Carbon Dots for Sensitive Detection of Ions and Bioimaging

The efficient detection of Fe3+ and MnO4− in a water environment is very important and challenging due to their harmful effects on the health of humanity and environmental systems. Good biocompatibility, sensitivity, selectivity, and superior photophysical properties were important attributes of carbon dot-based CDs sensors for sensing applications. In this work, we synthesized N, P-co-doped carbon dots (N/P CDs) with guanosine 5′-monophosphate (GMP) as a green carbon source, with high fluorescence quantum yield in water (QY, 53.72%). First, the luminescent N/P CDs showed a three-state “on-off-on” fluorescence response upon the sequential addition of Fe3+ and F−, with a low detection limit of 12 nM for Fe3+ and 8.5 nM for F−, respectively. Second, the N/P CDs also exhibited desirable selectivity and sensitivity for toxic MnO4− detection with the limit of detection of 18.2 nM, through a turn-off mechanism. Moreover, the luminescent N/P CDs successfully monitored the aforementioned ions in environmental water samples and in Escherichia coli.

A Theoretical Study of the Sensing Mechanism of a Schiff-Based Sensor for Fluoride

In the current work, we studied the sensing process of the sensor (E)-2-((quinolin-8ylimino) methyl) phenol (QP) for fluoride anion (F^-) with a "turn on" fluorescent response by density functional theory (DFT) and time-dependent density functional theory (TDDFT) calculations. The proton transfer process and the twisted intramolecular charge transfer (TICT) process of QP have been explored by using potential energy curves as functions of the distance of N-H and dihedral angle C-N=C-C both in the ground and the excited states. According to the calculated results, the fluorescence quenching mechanism of QP and the fluorescent response for F^- have been fully explored. These results indicate that the current calculations completely reproduce the experimental results and provide compelling evidence for the sensing mechanism of QP for F^-.

Synthesis and Characterization of Far-Red Emissive Boron-Based Triads Showing Large Stokes Shifts: Optical, TRANES, and Electrochemical Studies

Herein, we report the design and synthesis of far-red emissive boryl-thiophene-BODIPY triads 1-3. The π-conjugation length and electronic communication between borane and BODIPY moieties are tuned by judiciously varying the size of the oligothiophene spacer in these triads (1, terthiophene; 2, quarterthiophene; and 3, pentathiophene). Conjugates 1-3 showed intriguing triple emissions in the blue to far-red regions. Detailed optical, time-resolved decay kinetics, time-resolved area-normalized emission spectra (TRANES), fluoride binding, and computational studies suggest that the multiple emissions in these triads are due to an inefficient transfer of energy from the boryl-oligothiophene to the BODIPY unit. In addition, all of the conjugates showed a ratiometric fluorescence response to fluoride ions.

The sensing mechanism of a flavone-based ESIPT fluorescent chemodosimeter for selective recognition towards fluoride: a theoretical

The sensing mechanism of 3-hydroxyflavone-based (3-HF) fluorescent chemodosimeter 3-triisopropylsilylflavone (3-TPSF) for detecting fluoride (F-) has been theoretically investigated. The calculated Laplacian bond order confirms that the Si-O bond of 3-TPSF is the reaction site of F-. The free energy barrier of 18.33 kcal mol-1 indicates that F-triggered desilylation reaction can occur and then form the anionic state of 3-HF (3-HF-) with a fluorescence peak at 545 nm. 3-HF- captures H+ of the mixed aqueous medium to be transformed into 3-HF with an intramolecular hydrogen bond (O1-H⋯O2). The energy barrier of 1.86 kcal mol-1 in the S1 state obtained from the constructed potential energy curves confirms that the excited state intramolecular proton transfer (ESIPT) in 3-HF occurs to form a tautomer structure, which produces a long-wavelength emission of 549 nm. The fluorescence emitted from both 3-HF- and 3-HF agrees with the experimental value of 530 nm appearing after adding F-. Charge transfer analyses indicate that the extent of intramolecular charge transfer in 3-HF- is more intense than that of 3-TPSF, which induces a large Stokes shift of 180 nm. Therefore, the sensing mechanism is attributed to the combination of a large charge transfer feature and ESIPT that are caused by desilylation reaction. The significant fluorescence change makes 3-TPSF a chemodosimeter for detecting F-.

"Switch-Off-On" Detection of Fe3+ and F- Ions Based on Fluorescence Silicon Nanoparticles and Their Application to Food Samples

An approach to the detection of F⁻ ions in food samples was developed based on a “switch-off-on” fluorescence probe of silicon nanoparticles (SiNPs). The fluorescence of the synthetic SiNPs was gradually quenched in the presence of Fe³⁺ ion and slightly recovered with the addition of F⁻ ion owing to the formation of a stable and colorless ferric fluoride. The fluorescence recovery exhibited a good linear relationship (R² = 0.9992) as the concentration of F⁻ ion increased from 0 to 100 μmol·L⁻¹. The detection limit of the established method of F⁻ ion was 0.05 μmol·L⁻¹. The recovery experiments confirmed the accuracy and reliability of the proposed method. The ultraviolet–visible spectra, fluorescence decays, and zeta potentials evidenced the fluorescence quenching mechanism involving the electron transfer between the SiNPs and Fe³⁺ ion, while the fluorescence recovery resulted from the formation of ferric fluoride. Finally, SiNPs were successfully applied to detect F⁻ ions in tap water, Antarctic krill, and Antarctic krill powder.

A highly sensitive and selective fluoride sensor based on a riboswitch-regulated transcription coupled with CRISPR-Cas13a tandem reaction

Nucleic acid sensors have realized much success in detecting positively charged and neutral molecules, but have rarely been applied for measuring negatively charged molecules, such as fluoride, even though an effective sensor is needed to promote dental health while preventing osteofluorosis and other diseases. To address this issue, we herein report a quantitative fluoride sensor with a portable fluorometer readout based on fluoride riboswitch-regulated transcription coupled with CRISPR-Cas13-based signal amplification. This tandem sensor utilizes the fluoride riboswitch to regulate in vitro transcription and generate full-length transcribed RNA that can be recognized by CRISPR-Cas13a, triggering the collateral cleavage of the fluorophore-quencher labeled RNA probe and generating a fluorescence signal output. This tandem sensor can quantitatively detect fluoride at ambient temperature in aqueous solution with high sensitivity (limit of detection (LOD) ≈ 1.7 μM), high selectivity against other common anions, a wide dynamic range (0-800 μM) and a short sample-to-answer time (30 min). This work expands the application of nucleic acid sensors to negatively charged targets and demonstrates their potential for the on-site and real-time detection of fluoride in environmental monitoring and point-of-care diagnostics.

1,2-Phenylene-Incorporated Smallest Expanded Calix[4]pyrrole via One-Step Synthesis of Tetrapyrrane: A Fluorescent Host for Fluoride Ion

Synthesis of tetrapyrrane 8 from acetone and pyrrole via one-step condensation was achieved for the first time along with a much-improved yield of the tripyrrane 9. Diborylation of the tetrapyrrane and subsequent "1 + 1" cyclocoupling with 1,2-diiodobenzene following the Suzuki protocol generated novel o-phenylene incorporated macrocycle belonging to the smallest meso-expanded calix[4]pyrrole family. The latter macrocycle displays exclusive turn-on fluorescence sensing of fluoride ion upon complexation via a unique partial cone conformation supported by DFT analysis in acetonitrile solvent.

Ultrafast fluorescent probe with near-infrared analytical wavelength for fluoride ion detection in real samples

The first ultrafast fluorescence probe with response time in seconds (10 s) for fluoride ions (F^-) has been proposed by conjugating dimethylthiophosphoryl group as a recognition unit with the near-infrared fluorophore of hemicyanine. The response mechanism is the F^--induced cleavage of the dimethylthiophosphoryl group, along with the liberation of the fluorophore, which results in a distinctly enhanced fluorescence intensity at 730 nm (λ_ex = 680 nm). The fluorescence enhancement of the probe is directly proportional to the F^- concentration in the range of 10-300 µM with the detection limit of 4.28 µM. The probe has been successfully used to determine F^- concentration in real water and toothpaste samples as well as image F^- in living cells. The simplicity and quick response of this probe endow it with the ability of detecting F^- rapidly in real samples.

Selective sensing of sulfate anions in water with cyclopeptide-decorated gold nanoparticles

The interaction of cyclopeptides bound to the surface of mixed monolayer-protected gold nanoparticles with sulfate anions causes the crosslinking and concomitant precipitation of the nanoparticles from aqueous solutions even in presence of an excess of competing anions, thus allowing the naked eye detection of sulfate in water.

Carbazole sulfonamide-based macrocyclic receptors capable of selective complexation of fluoride ion

Two carbazole sulfonamide-based macrocycles 1 and 2 were facilely synthesized and carefully evaluated for their anion recognition properties. The obtained results revealed that macrocycle 1 with a 1,3-xylyl linker was able to bind fluoride ion more strongly and selectively in acetonitrile medium than its strong competitors (like acetate and dihydrogen phosphate anions), with a large binding constant (K_a) of 50 878 M⁻¹. More importantly, an exclusive fluoride recognition was achieved for macrocycle 1 in the more polar DMSO-d₆ solution, albeit with a moderate affinity of K_a = 147 M⁻¹. Compared with macrocycle 1, macrocycle 2 bearing a 2,6-lutidinyl linkage exhibited a remarkable change not only in the anion affinity but also in the anion selectivity, although with only a slight difference in their molecular structures.

Two carbazole sulfonamide-based macrocycles 1 and 2 were facilely synthesized and carefully evaluated for their anion recognition properties.

Hydrogen bond regulated hydrogen sulfate ion recognition: an overview

Hydrogen sulfate possesses substantial biological importance, having a colossal impact on physiological and environmental events. Therefore, several scientific groups have devoted serious effort to the development of versatile colorimetric and fluorimetric HSO4- sensors. Along with the scope, challenges, and significance, this review emphasizes the advancement of the optical recognition of HSO4- based on hydrogen bonding during the past two decades. Moreover, hydrogen-bond-driven proton transfer, ESIPT, ICT, PET, CHEF, and TBET mechanisms that allow for the optical detection of HSO4- are also discussed concisely. The foundation of this review includes the key points of the sensing process, like the nature of spectroscopic changes, selectivity and sensitivity, naked-eye color changes, the reusability of sensors, and the in vivo detection of HSO4-, if any. Special attention is focused on the correlation between the photophysical changes and the underlying interaction mechanisms that triggered the recognition aspect.

Sensing mechanism of fluorogenic urea with fluoride in solvent media: A new fluorescence quenching mechanism

The interaction of 1-Phenyl-3-(pyren-1-yl) urea (LH) and fluoride anion (F^-) with a unique ON¹-OFF-ON² fluorescent response has been investigated by the density functional theory (DFT) and time-dependent density functional theory (TDDFT) calculations. The hydrogen-bonding dynamics and photophysical properties of the complex LH-F, as well as its isolated receptor LH and anion form L-H₁, have been studied in detail. We demonstrate that the intermolecular hydrogen bond (N-H…F) of the complex LH-F is greatly enhanced in the electronically excited state. The nonradiative deactivation via electron transfer and internal conversion rather than excited-state intramolecular proton transfer (ESIPT) can be facilitated by the excited state hydrogen bond strengthening. The results have been cross-validated by molecular structure, electronic spectra, frontier molecular orbitals, and infrared spectra as well as hydrogen bond binding energy. These results indicate that the current calculations completely reproduce the experimental results and provide compelling evidence for the sensing mechanism of LH for F^-.

Membrane Exporters of Fluoride Ion

Microorganisms contend with numerous and unusual chemical threats and have evolved a catalog of resistance mechanisms in response. One particularly ancient, pernicious threat is posed by fluoride ion (F^-), a common xenobiotic in natural environments that causes broad-spectrum harm to metabolic pathways. This review focuses on advances in the last ten years toward understanding the microbial response to cytoplasmic accumulation of F^-, with a special emphasis on the structure and mechanisms of the proteins that microbes use to export fluoride: the CLC^F family of F^-/H⁺ antiporters and the Fluc/FEX family of F^- channels.

Exploring cyclohexane/piperazine-urea motifs for spherical halide (X = Cl−/Br−) recognition: effects on anion coordination, photoluminescence, and morphological tunability

Two bis-urea receptors bearing aromatic meta-substituted electron-withdrawing groups demonstrated  halide-coordination-triggered self-assemblies with contrasting coordination numbers and variation in morphology.

An overview of CO32−/HCO3− binding by aerial CO2 fixation within the self-assemblies of hydrogen-bond donor scaffolds

A comprehensive account of the F⁻/OH⁻-induced atmospheric CO₂ fixation as carbonate/bicarbonate anion(s) within the self-assemblies of artificial receptors are demonstrated in the highlight.

Studies of cyanomethylcarbamoyl-bridged anthracene and pyrene fluorophores

Cyanomethylcarbamoyl-bridged anthracene and pyrene derivatives were prepared as functional fluorophores with diverse structural, electronic, and fluorescence properties.

Utilization of a Crown Ether/Amine-Type Rotaxane as a Probe for the Versatile Detection of Anions and Acids by Thin-Layer Chromatography

A crown ether/amine-type [2]rotaxane was synthesized and utilized as a probe for the detection of acids and anions. The addition of acids to the amine-type [2]rotaxane solution generated corresponding crown ether/ammonium-type [2]rotaxanes, which were purified by silica gel column chromatography as ammonium salts. The isolated yields of the [2]rotaxanes, possessing a variety of anions, depended on the acidity and polarity of the counter anions. The behaviours of the ammonium-type [2]rotaxanes on thin-layer chromatography (TLC) silica gel reflected the properties of the counter anions. The treatment of the amine-type [2]rotaxane with acids afforded the corresponding ammonium-type [2]rotaxanes bearing several different anions. The ammonium-type [2]rotaxanes behaved similarly to the purified [2]rotaxanes on the TLC silica gel. Furthermore, we succeeded in the analysis of anions using mixtures of the amine-type [2]rotaxane and salts in an appropriate solvent. We demonstrated the detection of anions by the combination of TLC and the utilization of the [2]rotaxane probe.

Discriminative Behavior of a Donor-Acceptor-Donor Triad toward Cyanide and Fluoride: Insights into the Mechanism of Naphthalene Diimide Reduction by Cyanide and Fluoride

A new molecular donor-acceptor-donor (D-A-D) triad, comprised of an electron deficient 1,4,5,8-naphthalene tetracarboxylic diimide (NDI) unit covalently connected to two flanking photosensitizers, i.e., a bis-heteroleptic Ru(II) complex of 1,10-phenanthroline and pyridine triazole hybrid ligand, is described. The single crystal X-ray structure of the perchlorate salt of the triad demonstrates that the electron deficient NDI unit can act as a host for anions via anion-π interaction. Detailed solution-state studies indicate that fluoride selectively interacts with the D-A-D triad to form a dianionic NDI, NDI^2-, via a radical anion, NDI^•-. On the contrary, cyanide reduces the NDI moiety to NDI^•-, as confirmed by UV-vis, NMR, and EPR spectroscopy. Further, femtosecond transient absorption spectroscopic studies reveal a low luminescence quantum yield of the D-A-D triad attributable to the photoinduced electron transfer (PET) process from the photoactive Ru(II) center to the NDI unit. Interestingly, the triad displays "OFF-ON" luminescence behavior in the presence of fluoride by restoring the Ru(II) to phenanthroline/pyridine-triazole-based MLCT emission, whereas cyanide fails to show a similar property due to a different redox process operational in the latter. The reduction of NDI in the presence of fluoride and cyanide in different polar solvents indicates that involvement of such deprotonated solvents in the electron transfer mechanism may not be operative in our present system. Low-temperature kinetic studies support the formation of a charge transfer associative transient species, which likely allows overcoming the thermodynamically uphill barrier for the direct electron transfer mechanism.

Theoretical study on the sensing mechanism of an ON1-OFF-ON2 type fluoride fluorescent chemosensor

A density functional theory (DFT) and time-dependent density functional theory (TDDFT) calculations have been used to study the sensing mechanism of an ON¹-OFF-ON² type fluoride anion fluorescent chemosensor (Bis[[7-(diethylamino)-2-oxo-2H-chromene]methyl-ene]‑carbonothioic dihydrazide (CTC). The current theoretical calculation presents a different sensing mechanism from the experimentally proposed one (Sensor and Actuators B 2016, 222, 823-828). Instead of the combination of CTC deprotonation and poorly emissive excited state tautomer or ICT mechanism, the theoretical results predict the sensing mechanism based on dissociation reaction and excited-state proton transfer (ESPT). The calculated vertical excitation energies both in the ground states and first excited states of different forms of CTC, as well as the potential-energy curves, have completely reproduced the experimental results, providing powerful evidence for our proposed CTC sensing mechanism for fluoride anion.