Visible-light-induced N-alkylation of anilines with 4-hydroxybutan-2-one

The synthesis of amines through N-alkylation is particularly attractive. Herein, a strategy for visible-light-induced N-alkylation of anilines with 4-hydroxybutan-2-one was developed in the presence of NH4Br, which avoid the use of metals, bases and ligands. In addition, gram-scale experiments proved that the system has the potential to be scaled.

Photo-Induced C1 Substitution Using Methanol as a C1 Source

The development of sustainable and efficient C1 substitution methods is of central interest for organic synthesis and pharmaceuticals production, the methylation motifs bound to a carbon, nitrogen, or oxygen atom widely exist in natural products and top-selling drugs. In the past decades, a number of methods involving green and inexpensive methanol have already been disclosed to replace industrial hazardous and waste-generating C1 source. Among the various efforts, photochemical strategy is considered as a "renewable" alternative that shows great potential to selectively activate methanol to achieve a series of C1 substitutions at mild conditions, typically C/N-methylation, methoxylation, hydroxymethylation, and formylation. Herein the recent advances in selective transformation of methanol to various C1 functional groups via well-designed photochemical systems involving different types of catalysts or not is systematically reviewed. Both the mechanism and corresponding photocatalytic system were discussed and classified on specific methanol activation models. Finally, the major challenges and perspectives are proposed.

Production of Piperidine and δ-Lactam Chemicals from Biomass-Derived Triacetic Acid Lactone

Piperidine and δ-Lactam chemicals have wide application, which are currently produced from fossil resource in industry. Production of this kind of chemicals from lignocellulosic biomass is of great importance, but is challenging and the reported routes give low yield. Herein, we demonstrate the strategy to synthesize 2-methyl piperidine (MP) and 6-methylpiperidin-2-one (MPO) from biomass-derived triacetic acid lactone (TAL) that is produced microbially from glucose. In this route, TAL was firstly converted into 4-hydroxy-6-methylpyridin-2(1H)-one (HMPO) through facile aminolysis, subsequently HMPO was selectively transformed into MP or MPO over Ru catalysts supported on beta zeolite (Ru/BEA-X, X is the molar ratio of Si to Al) via the tandem reaction. It was found that the yield of MP could reach 76.5 % over Ru/BEA-60 in t-BuOH, and the yield of MPO could be 78.5 % in dioxane. Systematic studies reveal that the excellent catalytic performance of Ru/BEA-60 was closely correlated with the cooperative effects between active metal and acidic zeolite with large pore geometries. The related reaction pathway was studied on the basis of control experiments.

Ruthenium-catalysed chemoselective alkylation of nitroarenes with alkanols

The alkylation of nitroarenes with akanols catalysed by the phosphinesulfonate ruthenium complex was reported. It displays different reactivity and chemoselectivity depending on the acid–base conditions, delivering diverse anilines from nitroarenes.

Additive-free N-methylation of amines with methanol over supported iridium catalyst

Clean N-methylation of amines with methanol was achieved, providing a green approach to the selective synthesis of mono- or di-methylated amines.

Seeded Growth Synthesis of Zirconia@Gold Particles in Aqueous Solution

Metal-ceramic composite particles are of increasing interest due to their potential applications in photonic metamaterials as well as next-generation catalysts. The zirconia-gold system has received little attention due to the lack of controllable preparation methods. Well-known methods for the deposition of gold nanoshells on silica spheres, however, should be adaptable for similar zirconia-based materials. Here, we present a novel synthetic approach to the well-controlled deposition of gold on the surface of sol-gel derived zirconia mesoparticles by a stepwise method involving the immobilization of gold nanoparticles and repeated seeded-growth steps. We show that the immobilization efficiency is strongly enhanced by acidification with hydrochloric acid and additional employment of aminomethylphosphonic acid as coupling agent. The optimum conditions are identified and the subsequent incremental growth by seeded reduction of gold is demonstrated. The results shed light on the parameters governing the preparation of zirconia@gold composite particles and our synthetic approach provides a promising tool for future developments in complex nanomaterials design.

Tandem transformations and multicomponent reactions utilizing alcohols following dehydrogenation strategy

In this review, the progress of tandem transformation of nitro, nitrile and azide functionalities is summarised to develop new C–C and C–N bonds as well as multi-component reactions using alcohols.

Effective N-methylation of nitroarenes with methanol catalyzed by a functionalized NHC-based iridium catalyst: a green approach to N-methyl amines

An Ir–NHC compound catalyzes the borrowing-hydrogen reduction of nitroarenes into N-methyl amines with methanol through a direct mechanism.

Synthetic Approaches for C-N Bonds by TiO2 Photocatalysis

Nitrogen-containing organic compounds possess the most important status in drug molecules and agricultural chemicals. More than 80% currently used drugs have at least a C-N bond. The green and mild methodology to prepare diverse C-N bonds to replace traditional harsh preparation protocols is always a hotspot in modern synthetic chemistry. TiO₂-based nanomaterials, considered as environmentally benign, stable, and powerful photocatalysts, have recently been applied in some certain challenging organic synthesis including construction of useful C-N compounds under mild conditions that are impossible to complete by conventional catalysis. This mini review would present state-of-the-art paragon examples of TiO₂ photocatalyzed C-N bond formations. The discussion would be divided into two main sections: (1) N-alkylation of amines and (2) C-N formation in heterocycle synthesis. Especially, the mechanism of TiO₂ photocatalytic C-N bond formation through activating alcohol into C=O by photo-induced hole followed by C=NH-R formation and finally hydrogenating C=NH-R into C-N bonds by combination of photo-induced electron/H⁺ assisted with loaded-Pt would be covered in detail. We believe that the mini-review will bring new insights into TiO₂ photocatalysis applied to construct challenging organic compounds through enabling photo-induced hole and electron in a concerted way on coupling two substrate molecules together with respect to their conventionally independent catalysis behavior.

Preparation of CdS-TiO2-Based Palladium Heterogeneous Nanocatalyst by Solvothermal Route and Its Catalytic Activity for Reduction of Nitroaromatic Compounds

In this study, bare CdS nanoparticles (NPs) were prepared by solvothermal method using CdCl₂(3-methylbenzaldehyde thiosemicarbazone)₂ as a single-source molecular precursor in the presence of ethylene glycol. Further, these CdS NPs were used for the preparation of binary (CdS-TiO₂) and ternary (CdS-TiO₂/Pd) heterogeneous nanocatalysts. Characterization of the as-prepared nanocatalysts has been carried out using different techniques such as powder X-ray diffraction (XRD), Fourier transform infrared spectroscopy, field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), UV-visible diffuse reflectance spectroscopy, and photoluminescence studies. The peak observed at 2θ = 39.5° in XRD confirms the successful doping of noble metal (Pd) on the surface of CdS-TiO₂ nanocatalyst, which is well supported by Raman analysis. From FESEM and TEM analyses, mixed morphology has been observed and elemental composition was confirmed by energy-dispersive X-ray spectroscopy elemental mapping. Furthermore, the as-prepared bare CdS NPs, binary CdS-TiO₂, and ternary CdS-TiO₂/Pd heterogeneous nanocatalysts were used for the reductive transformation of various nitroaromatic compounds to their corresponding aromatic amines at room temperature. It has been observed that among all of the catalysts, ternary CdS-TiO₂/Pd heterogeneous nanocatalyst has excellent catalytic property to reduce all nitroaromatic compounds in very short time span.

N-Alkylation of functionalized amines with alcohols using a copper-gold mixed photocatalytic system

Direct functionalization of amino groups in complex organic molecules is one of the most important key technologies in modern organic synthesis, especially in the synthesis of bio-active chemicals and pharmaceuticals. Whereas numerous chemical reactions of amines have been developed to date, a selective, practical method for functionalizing complex amines is still highly demanded. Here we report the first late-stage N-alkylation of pharmaceutically relevant amines with alcohols at ambient temperature. This reaction was achieved by devising a mixed heterogeneous photocatalyst in situ prepared from Cu/TiO₂ and Au/TiO₂. The mixed photocatalytic system enabled the rapid N-alkylation of pharmaceutically relevant molecules, the selective mono- and di-alkylation of primary amines, and the non-symmetrical dialkylation of primary amines to hetero-substituted tertiary amines.

Nitroarene reduction: a trusted model reaction to test nanoparticle catalysts

Nitrophenol reduction to aminophenol with a reducing agent is conveniently carried out in aqueous medium mainly with a metal or metal oxide catalyst. This reduction is presently considered as a benchmark reaction to test a catalyst nanoparticle. Thousands of original reports have enriched this field of nanoparticle catalyzed reaction. Synthesis of different metal and metal oxide nanoparticles and their composites along with their role as catalysts for nitrophenol reduction with varying reducing agents have been elucidated here. The progress of the reaction is conveniently monitored by UV-visible spectrophotometry and hence it becomes a universally accepted model reaction. In this review we have discussed the reaction kinetics considering its elegance and importance enlightening the long known Langmuir-Hinshelwood mechanism and Eley-Rideal mechanism at length, along with a few other mechanisms recently reported. A brief description of the synthetic procedures of various nanoparticles and their respective catalytic behaviour towards nitroarene reduction has also been accounted here.

Photocatalytic synthesis of anilides from nitrobenzenes under visible light irradiation: 2 in 1 reaction

An efficient method has been developed for the synthesis of a series of anilides via a two in one reaction of nitrobenzenes with anhydride in the presence of TiO2 as a nanocatalyst and photocatalyst under sunlight or blue LED irradiation. In this method simultaneously, nitrobenzenes convert to the corresponding anilines via photocatalytic reduction on the TiO2 surface, and a condensation of aniline with the anhydride performed on the Lewis acid site of the TiO2 surface. Interestingly amidation step leads to the promotion of better reaction and good selectivity in reduction of nitrocompounds. This method is simple, rapid, high yield, and green.

One-pot synthesis of secondary amines from alcohols and nitroarenes on TiO2 loaded with Pd nanoparticles under UV irradiation

TiO₂ loaded with Pd nanoparticles, when irradiated by UV light in alcohols with nitroarenes, successfully produces the corresponding secondary amines with almost quantitative yield, via tandem photocatalytic and catalytic reactions.

Light-promoted N,N-dimethylation of amine and nitro compound with methanol catalyzed by Pd/TiO2 at room temperature

The N,N-dimethylation of different amines and nitro compounds with methanol were realized under UV irradiation at room temperature catalyzed by Pd/TiO₂.

Room temperature N-alkylation of amines with alcohols under UV irradiation catalyzed by Cu–Mo/TiO2

Cu–Mo/TiO₂ can be an active photocatalyst for N-alkylation of amines with alcohols under UV irradiation at room temperature without the addition of noble metals.

Metal/Semiconductor hybrid nanostructures for plasmon-enhanced applications

Hybrid nanostructures composed of semiconductor and plasmonic metal components are receiving extensive attention. They display extraordinary optical characteristics that are derived from the simultaneous existence and close conjunction of localized surface plasmon resonance and semiconduction, as well as the synergistic interactions between the two components. They have been widely studied for photocatalysis, plasmon-enhanced spectroscopy, biotechnology, and solar cells. In this review, the developments in the field of (plasmonic metal)/semiconductor hybrid nanostructures are comprehensively described. The preparation of the hybrid nanostructures is first presented according to the semiconductor type, as well as the nanostructure morphology. The plasmonic properties and the enabled applications of the hybrid nanostructures are then elucidated. Lastly, possible future research in this burgeoning field is discussed.

Dye-injected electron trapping in TiO2 determined by broadband transient infrared spectroscopy

We report the dynamics of electrons injected into TiO₂ due to the excitation of Ru-N719 dye at 532 nm.