Nature-Inspired Biomolecular Corona Based on Poly(caffeic acid) as a Low Potential and Time-Stable Glucose Biosensor

Herein, we present a novel biosensor based on nature-inspired poly(caffeic acid) (PCA) grafted to magnetite (Fe3O4) nanoparticles with glucose oxidase (GOx) from Aspergillus niger via adsorption technique. The biomolecular corona was applied to the fabrication of a biosensor system with a screen-printed electrode (SPE). The obtained results indicated the operation of the system at a low potential (0.1 V). Then, amperometric measurements were performed to optimize conditions like various pH and temperatures. The SPE/Fe3O4@PCA-GOx biosensor presented a linear range from 0.05 mM to 25.0 mM, with a sensitivity of 1198.0 μA mM-1 cm-2 and a limit of detection of 5.23 μM, which was compared to other biosensors presented in the literature. The proposed system was selective towards various interferents (maltose, saccharose, fructose, L-cysteine, uric acid, dopamine and ascorbic acid) and shows high recovery in relation to tests on real samples, up to 10 months of work stability. Moreover, the Fe3O4@PCA-GOx biomolecular corona has been characterized using various techniques such as Fourier transform infrared spectroscopy (FTIR), high-resolution transmission electron microscopy (HRTEM), atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), and Bradford assay.

Magnetic ethylene-based periodic mesoporous organosilica supported palladium: An efficient and recoverable nanocatalyst for Suzuki reaction

In the present study, a novel magnetic ethylene-based periodic mesoporous organosilica supported Pd-Schiff base complex (Fe₃O₄@PMO/SB-Pd) was prepared, characterized and applied as a recoverable nanocatalyst for green synthesis of Suzuki products. Chemical composition, magnetic and thermal behavior, morphology and particle size of Fe₃O₄@PMO/SB-Pd were investigated by using FT-IR, TGA, EDX, VSM, PXRD, TEM and Scanning electron microscopy (SEM) analyses. The Fe₃O₄@PMO/SB-Pd nanocomposite was applied as an efficient nanocatalyst in the Suzuki reaction under ultrasonic conditions giving corresponding products in high yield. Some advantages of this study are simple purification of products, the use of water solvent, easy catalyst separation, short reaction time and high catalyst efficiency and recoverability.

Magnetic nanoparticle-supported eosin Y salt [SB-DABCO@eosin] as an efficient heterogeneous photocatalyst for the multi-component synthesis of chromeno[4,3-b]chromene in the presence of visible light

Heterogeneous photocatalysts present a favourable procedure to realize green and eco-friendly organic reactions. We have demonstrated an SB-DABCO@eosin catalyst in a green one-pot multi-component protocol for the production of various chromeno[4,3-b]chromenes via condensation of aromatic aldehydes and dimedone under the photo-redox catalyst bearing eosin Y using visible light. The synthesized nanocatalyst was characterized using various physicochemical techniques such as FT-IR, XRD, EDX, UV-vis, SEM, TGA and DRS. The significant advantages of the present methodology include excellent yield, cost-effectiveness, easy work-up, 100% atom economy, broad substrate scope, easy separation and efficient recycling. Furthermore, the evidence showed that the investigated condensation reaction proceeds via a radical mechanism, which proved the need for reactive species such as OH˙ and ˙O₂ ^- in the photocatalytic process. In addition to the improved handling and process control, the yield of products and the rate of reactions have increased considerably in the present strategy. Reproducibility studies also guarantee good reusability and stability of the nanocatalyst for at least five runs.

XPS and structural studies of Fe3O4-PTMS-NAS@Cu as a novel magnetic natural asphalt base network and recoverable nanocatalyst for the synthesis of biaryl compounds

In this research, natural asphalt as a mineral carbonuous material was converted to sodium natural asphalt sulfonate (Na-NAS) and, then, was linked to Fe₃O₄ MNPs in order to synthesize the magnetic nanocatalyst. Afterwards, Cupper (I) and Cu (II) was grafted on Fe₃O₄-PTMS-NAS. Moreover, it is worth mentioning that the synthesized the novel magnetic nanocatalyst (Fe₃O₄-PTMS-NAS@Cu) was successfully used in Suzuki and Stille coupling reactions. The Fe₃O₄-PTMS-NAS@Cu MNPs were characterized by Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), thermogravimetric analysis (TGA), vibrating sample magnetometry (VSM), inductively coupled plasma (ICP), BET and X-ray photoelectron spectroscopy (XPS) analysis. Besides, sulfonation of natural asphalt, magnetization of catalyst, grafting of Cu (I) and Cu (II) to NAS and catalyst formation were investigated and proved carefully. This nanocatalyst can be comfortably separated from the reaction medium through an external magnetic field and can also be recovered and reused, while maintaining its catalytic activity.

1,2,3-Triazole framework: a strategic structure for C-H⋯X hydrogen bonding and practical design of an effective Pd-catalyst for carbonylation and carbon-carbon bond formation

1,2,3-Triazole is an interesting N-heterocyclic framework which can act as both a hydrogen bond donor and metal chelator. In the present study, C-H hydrogen bonding of the 1,2,3-triazole ring was surveyed theoretically and the results showed a good agreement with the experimental observations. The click-modified magnetic nanocatalyst Pd@click-Fe₃O₄/chitosan was successfully prepared, in which the triazole moiety plays a dual role as both a strong linker and an excellent ligand and immobilizes the palladium species in the catalyst matrix. This nanostructure was well characterized and found to be an efficient catalyst for the CO gas-free formylation of aryl halides using formic acid (HCOOH) as the most convenient, inexpensive and environmentally friendly CO source. Here, the aryl halides are selectively converted to the corresponding aromatic aldehydes under mild reaction conditions and low Pd loading. The activity of this catalyst was also excellent in the Suzuki cross-coupling reaction of various aryl halides with phenylboronic acids in EtOH/H₂O (1 : 1) at room temperature. In addition, this catalyst was stable in the reaction media and could be magnetically separated and recovered several times.

Synthesis, characterization and cytotoxicity evaluation of a novel magnetic nanocomposite with iron oxide deposited on cellulose nanofibers with nickel (Fe3O4@NFC@ONSM-Ni)

A heterogeneous, magnetically recoverable nanocomposite, Fe3O4@NFC@ONSM-Ni(ii) was prepared by immobilization of a novel Ni(ii) Schiff base complex on Fe3O4@NFC nanoparticles followed by treatment with melamine. This trinuclear catalyst has been characterized using several analytical techniques including FT-IR, TEM, Fe-SEM, EDX, DLS, ICP, TGA, VSM, and XRD. It was used as an efficient catalyst for one-pot solvent-free synthesis of 1,4-dihydropyridine and poly-hydro quinoline derivatives through Hantzsch reaction. This catalyst showed remarkable advantage over previously reported catalysts due to suitable conditions, short reaction time, high efficiency and lower catalyst load and timely recovery of the magnetic catalyst. Moreover, the effects of Fe3O4@NFC@ONSM-Ni(ii) nanoparticles on the in vitro proliferation of human leukemia cell line (k562) and human breast cancer cells (MDA-MB-231) were investigated. The results of MTT and Hochest assays suggested that the nanoparticles could effectively inhibit the proliferation of these cancer cells in a time- and concentration-dependent manner.

Diversification of quinoline-triazole scaffolds with CORMs: Synthesis, in vitro and in silico biological evaluation against Plasmodium falciparum

A discrete series of tricarbonyl manganese and rhenium complexes conjugated to a quinoline-triazole hybrid scaffold were synthesised and their inhibitory activities evaluated against Plasmodium falciparum. In general, the complexes show moderate activity with improved inhibitory activities for the photoactivatable manganese(I) tricarbonyl complexes in the malaria parasite. All complexes are active in the dark against the NF54 CQS (chloroquine-sensitive) and K1 MDR (multidrug-resistant) strains of Plasmodium falciparum, with IC₅₀ values in the low micromolar range. Of significance, the complexes retain their activity in the MDR strain with resistance indices ranging between 1.1 and 2.1. The Mn(I) analogues display photodissociation of all three CO ligands upon irradiation at 365 nm. More importantly, the complexes show increased antimalarial activity in vitro upon photoactivation, something not observed by the clinically used reference drug, chloroquine. As a purported mechanism of action, the compounds were evaluated as β-haematin inhibitors. To further understand the interactions of the complexes, in silico hemozoin docking simulations were performed, attesting to the fact that CO-release could be vital for blocking the hemozoin formation pathway. These results show that this strategy may be a valuable, novel route to design antimalarial agents with higher efficacy.

Synthesis of nano magnetic supported NHC-palladium and investigation of its applications as a catalyst in the Mizoroki-Heck cross-coupling reaction in H2O

The unique properties of N-heterocyclic carbenes (NHCs) as an effective ligand for palladium catalytic centers have recently found much attention. In this work, Fe₃O₄ nanoparticle supported palladium(II)-N-heterocyclic carbene catalyst was successfully designed, synthesized and characterized by various methods. The activity of the catalyst was evaluated in the Mizoroki-Heck cross-coupling reaction in which the desired products were obtained in high yield in H₂O as a green solvent. The reaction was carried out in short reaction times using low amounts of the catalyst. Moreover, the catalyst was easily separated from the reaction media and reused for 5 cycles.

Cu(II)-Hydrazide Coordination Compound Supported on Silica Gel as an Efficient and Recyclable Heterogeneous Catalyst for Green Click Synthesis of β-Hydroxy-1,2,3-triazoles in Water

A hydrazone ligand, (E)-6-(2-((2-hydroxynaphthalen-1-yl)methylene)hydrazinyl)nicotinohydrazide (H₂L), was synthesized and characterized by spectroscopic methods. The reaction of H₂L with CuCl₂·2H₂O in methanol gave Cu(II) coordination compound, [Cu(HL')(Cl)]·CH₃OH (1), which was characterized by elemental analysis and spectroscopic methods (Fourier transform infrared (FT-IR) and UV-vis). The structure of 1 was also determined by single-crystal X-ray analysis. Structural studies confirmed the formation of esteric group during the synthesis of 1. Compound 1 was immobilized on 3-aminopropyltriethoxysilane (APTS)-functionalized silica gel through the amidification reaction and the obtained heterogeneous coordination compound was utilized as a catalyst for the three-component azide-epoxide-alkyne cycloaddition reaction in water as a green solvent. The structural properties of the heterogeneous catalyst were characterized by a combination of FT-IR, UV-vis, thermogravimetric analysis (TGA), scanning electron microscopy (SEM) and energy-dispersive spectrometry (EDS) analyses. The effect of the amount of catalyst and temperature on the cycloaddition reaction was studied, and the obtained 1,2,3-triazoles were characterized by spectroscopic studies and single-crystal X-ray analysis. The catalytic investigations revealed that this catalytic system has high activity in the synthesis of β-hydroxy-1,2,3-triazoles. It was also found that the aromatic and aliphatic substituents on the alkyne and epoxide together with the reaction temperature have considerable effects on the activity and regioselectivity of this catalytic system.

An Amino-Chain Modified β-cyclodextrin: A Supramolecular Ligand for Pd(OAc)2 Acceleration in Suzuki–Miyaura Coupling Reactions in Water

A well-designed and synthesized water-soluble class of β-cyclodextrin supported palladium complex PdLn@Et-β-CD could efficiently validate high catalytic activity and act as a supramolecular platform for phosphine-free Suzuki–Miyaura cross‐coupling reactions between arylboronic acid/ arylboronic ester and aryl halides in water under mild conditions. The presented novel PdLn@Pr-β-CD complex catalyst was characterized by NMR, XRD, FT-IR, and DSC analysis. Furthermore, the role of the PdLn@Et-β-CD fragment in the reaction mechanism studied by molecular complexation was proposed based on FT-IR, 2D NMR (ROESY) spectroscopy, FE-SEM, and DSC spectroscopic analysis. The important benefits of this technique comprise simple phosphine-free preparation of the palladium catalyst, a wide range of functional-group tolerance, and easy recyclability; this method, furthermore, eschews hazardous reagents or solvents.

A novel protocol for the synthesis of pyrano[2,3-h]coumarins in the presence of Fe3O4@SiO2@(CH2)3OCO2Na as a magnetically heterogeneous catalyst

In this study, sodium carbonate functionalized silica coated-iron oxide nanoparticles (Fe₃O₄@SiO₂@(CH₂)₃OCO₂Na) were synthesized, characterized and applied as a heterogeneous basic nanocatalyst for the synthesis of pyrano[2,3-h]coumarins.

An intramolecular relay catalysis strategy for Knoevenagel condensation and 1,3-dipolar cycloaddition domino reactions

A relay catalysis strategy was established by using a bifunctional catalyst which was prepared by immobilization of organic chains containing secondary amine and Cu(ii) complex onto silica-coated nano-Fe₃O₄. The simply prepared nanoparticles acted as efficient, intramolecular relays and magnetically recyclable base-metal bifunctional catalysts for Knoevenagel condensation and 1,3-dipolar cycloaddition domino reactions to prepare 5-substituted 1H-tetrazoles with excellent yields.

A magnetically recoverable bifunctional catalyst was synthesized and effectively used in Knoevenagel condensation and 1,3-dipolar cycloaddition domino reactions.

One-pot synthesis of 3,4-dihydropyrimidin-2(1H)-ones catalyzed by SO3H@imineZCMNPs as a novel, efficient and reusable acidic nanocatalyst under solvent-free conditions

The synthesis of 3,4-dihydropyrimidin-2(1H)-one derivatives was accomplished efficiently via a three-component reaction between ethyl acetoacetate, various types of aldehydes, and urea in the presence of 10 mg SO₃H@imineZCMNPs as a novel, environment friendly, and reusable heterogeneous magnetic nanocatalyst under solvent-free conditions at 90 °C. The desired products were obtained with high quantitative yields. The catalyst was separated by simple isolation from the reaction mixture using a permanent magnet and reused several times without any significant loss of catalytic activity. The synthesized catalyst was fully characterized through various techniques including thermogravimetric analysis, Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and the Hammett acidity test. This methodology tolerates most substrates and has the salient features of green reaction conditions, lower catalyst loading, high quantitative yields, low cost, the absence of solvents, and easy isolation and reusability of the catalyst.

An efficient and recyclable acid–base bifunctional core–shell nano-catalyst for the one-pot deacetalization–Knoevenagel tandem reaction

An acid–base bifunctional nano-catalyst was synthesized and applied as an efficient and recoverable catalyst in the one-pot deacetalization–Knoevenagel tandem reaction.

Preparation, characterization and catalytic application of nano-Fe3O4@SiO2@(CH2)3OCO2Na as a novel basic magnetic nanocatalyst for the synthesis of new pyranocoumarin derivatives

We present a study on the synthesis, characterization and application of sodium carbonate tag silica-coated nano-Fe₃O₄ (Fe₃O₄@SiO₂@(CH₂)₃OCO₂Na) as a novel and efficient heterogeneous basic catalyst.

Synthesis and characterization of molybdic acid immobilized on modified magnetic nanoparticles as a new and recyclable catalyst for the synthesis of chromeno[4,3-b]chromenes

Synthesis and characterization of molybdic acid immobilized on modified magnetic nanoparticles as a new catalyst is reported.

NH2- or PPh2-functionalized linkers for the immobilization of palladium on magnetite nanoparticles?

The influence of the linker in the immobilization of Pd NPs on magnetic NPs has been demonstrated.

Covalently anchored tertiary amine functionalized ionic liquid on silica coated nano-Fe3O4 as a novel, efficient and magnetically recoverable catalyst for the unsymmetrical Hantzsch reaction and Knoevenagel condensation

A novel MNP-supported basic IL catalyst was prepared and used as a magnetically recoverable catalyst for Hantzsch and Knoevenagel condensation.