Facile synthesis of a three-dimensional Ln-MOF@FCNT composite for the fabrication of a symmetric supercapacitor device with ultra-high energy density: overcoming the energy storage barrier

In order to quench the thirst for efficient energy storage devices, a novel praseodymium-based state-of-the-art three-dimensional metal-organic framework (MOF), {[Pr(pdc)2]Me2NH2}n (YK-1), has been synthesized by using a simple solvothermal method employing a readily available ligand. YK-1 was characterised by single-crystal XRD and crystallographic analysis. The electrochemical measurements of YK-1 show that it exhibits a specific capacitance of 363.5 F g-1 at a current density of 1.5 A g-1 with 83.8% retention after 5000 cycles. In order to enhance its electrochemical performance for practical application, two composites of YK-1 with graphene oxide (GO) and functionalised multi-walled carbon nanotubes (FCNTs), namely YK-1@GO and YK-1@FCNT, were fabricated by employing a facile ultrasonication technique. The as-synthesized MOF and the composites were characterized by PXRD, FTIR, SEM, and TEM techniques. YK-1@GO and YK-1@FCNT offer enhanced specific capacitances of 488.2 F g-1 and 730.2 F g-1 at the same current density with 93.8% and 97.7% capacity retention after 5000 cycles, respectively (at 16 A g-1). Fascinated by the outstanding results shown by YK-1@FCNT, a symmetric supercapacitor device (SSC) based on it was fabricated. The assembled SSC achieved a remarkable energy density (87.6 W h kg-1) and power density (750.2 W kg-1) at a current density of 1 A g-1, along with very good cycling stability of 91.4% even after 5000 GCD cycles. The SSC device was able to power up several LED lights and even operated a DC brushless fan for a significant amount of time. To the best of our knowledge, the assembled SSC device exhibits the highest energy density among the MOF composite-based SSCs reported so far.

Effect of Electrolytic Cations on a 3D Cd-MOF for Supercapacitive Electrodes

A cadmium-based metal-organic framework (Cd-MOF) is synthesized in a facile manner at ambient temperature by an easy slow diffusion process. The three-dimensional (3D) structure of Cd-MOF is authenticated by single-crystal X-ray diffraction studies and exhibits a cuboid-shaped morphology with an average edge length of ∼1.13 μm. The prepared Cd-MOF was found to be electroactive in nature, which resulted in a specific capacitance of 647 F g^-1 at 4 A g^-1 by maintaining a retention of ∼78% over 10,000 successive cycles in the absence of any binder. Further, to distinguish the efficiency of Cd-MOF electrodes, different electrolytes (NaOH, KOH, and LiOH) were explored, wherein NaOH revealed a higher capacitive response due to its combined effect of ionic and hydrated ionic radii. To investigate the practical applicability, an asymmetric supercapacitor (ASC) device is fabricated by employing Cd-MOF as the positive electrode and activated carbon (AC) as the negative electrode, enabling it to light a commercial light-emitting diode (LED) bulb (∼1.8 V). The as-fabricated ASC device delivers comparable energy density and power density.

Electrocatalytic Behavior of an Amide Functionalized Mn(II) Coordination Polymer on ORR, OER and HER

The new 3D coordination polymer (CP) [Mn(L)(HCOO)]n (Mn-CP) [L = 4-(pyridin-4-ylcarbamoyl)benzoate] was synthesised via a hydrothermal reaction using the pyridyl amide functionalized benzoic acid HL. It was characterized by elemental, FT-IR spectroscopy, single-crystal and powder X-ray diffraction (PXRD) analyses. Its structural features were disclosed by single-crystal X-ray diffraction analysis, which revealed a 3D structure with the monoclinic space group P21/c. Its performance as an electrocatalyst for oxygen reduction (ORR), oxygen evolution (OER), and hydrogen evolution (HER) reactions was tested in both acidic (0.5 M H2SO4) and alkaline (0.1 M KOH) media. A distinct reduction peak was observed at 0.53 V vs. RHE in 0.1 M KOH, which corresponds to the oxygen reduction, thus clearly demonstrating the material's activity for the ORR. Tafel analysis revealed a Tafel slope of 101 mV dec-1 with mixed kinetics of 2e- and 4e- pathways indicated by the Koutecky-Levich analysis. Conversely, the ORR peak was not present in 0.5 M H2SO4 indicating no activity of Mn-CP for this reaction in acidic media. In addition, Mn-CP demonstrated a noteworthy activity toward OER and HER in acidic media, in contrast to what was observed in 0.1 M KOH.

Electrochemical performance of composite electrodes based on rGO, Mn/Cu metal-organic frameworks, and PANI

Benzendicarboxylic acid (BDC)-based metal–organic frameworks (MOFs) have been widely utilized in various applications, including supercapacitor electrode materials. Manganese and copper have solid diamond frames formed with BDC linkers among transition metals chosen for MOF formation. They have shown the possibility to enlarge capacitance at different combinations of MOFs and polyaniline (PANI). Herein, reduced graphene oxide (rGO) was used as the matrix to fabricate electrochemical double-layer SCs. PANI and Mn/Cu-MOF's effect on the properties of electrode materials was investigated through electrochemical analysis. As a result, the highest specific capacitance of about 276 F/g at a current density of 0.5 A/g was obtained for rGO/Cu-MOF@PANI composite.

State of the art developments and prospects of metal-organic frameworks for energy applications

The progress on technologies for the cleaner and ecological transformation and storage of energy to combat effluence or pollution and the impending energy dilemma has recently attracted interest from energy research groups, particularly in the field of coordination chemistry, among inorganic chemists. Carriers for storing energy or facilitating mass and e^- transport are considered significant for energy conversion. Accordingly, considering their properties such as large surface area, low cost, customizable pore diameter, tunable topologies, low densities, and variable frameworks, MOFs (metal-organic frameworks) and their derivatives are well-suited for this purpose. MOFs are an innovative category of porous and crystalline materials, which have gained significant interest in recent years. Thus, herein, we highlight the state of the art progress on MOFs for energy-based applications, as perfect compounds and elements in compound assemblies for converting solar energy, lithium-ion arrays, fuel devices, hydrogen production, photocatalytic CO₂ reduction, proton conduction, etc. In addition, the substantial progress achieved in the production of various composites and derivatives containing MOFs with particular focus on supercapacitors and gas adsorption and storage is summarized, concentrating on the correlation between their coordination structural frameworks and applications in the field of energy. The current improved strategies, challenges, and future prospects are also presented in view of the coordination chemistry governing the structural modification of MOFs for energy applications.

Preparation of Flower-like Nickel-Based Bimetallic Organic Framework Electrodes for High-Efficiency Hybrid Supercapacitors

Metal organic frameworks (MOFs) have been rapidly developed in the application of electrode materials due to their controllable morphology and ultra-high porosity. In this research, flower-like layered nickel-based bimetallic MOFs microspheres with different metal central ions were synthesized by solvothermal method. Compared with Ni-MOFs, the optimization of the specific capacitance of NiCo-MOFs and NiMn-MOFs was been confirmed. For example, the specific capacitance of NiCo-MOFs can reach 882 F·g−1 at 0.5 A·g−1 while maintaining satisfactory cycle life (the specific capacity remains 90.1% of the initial value after 3000 charge-discharge cycles at 5 A·g−1). In addition, the NiCo-MOFs//AC HSCs, which are composed of NiCo-MOFs and activated carbon (AC), achieved a maximum energy density of 18.33 Wh·kg−1 at a power density of 400 W·kg−1, and showed satisfactory cycle life (82.4% after 3000 cycles). These outstanding electrochemical properties can be ascribed to the synergistic effect between metal ions, the optimized conductivity, and the unique layered stacked flower structure, which provides a smooth transmission channel for electrons/ions. In addition, this research gives a general method for the application of MOFs in the field of supercapacitors.

Heterometallic MOFs constructed from thiophene and furandicarboxylate ligands for heavy metal luminescence sensing

A series of heterometallic porous MOFs were rationally designed from preorganized molecular complexes for heavy metal cation luminescence detection.

Versatility of Amide-Functionalized Co(II) and Ni(II) Coordination Polymers: From Thermochromic-Triggered Structural Transformations to Supercapacitors and Electrocatalysts for Water Splitting

The new 2D coordination polymers (CPs) [M(L)₂(H₂O)₂]_n [M = Co^II (1) and Ni^II (2); L = 4-(pyridin-3-ylcarbamoyl)benzoate] were synthesized from pyridyl amide-functionalized benzoic acid (HL). They were characterized by elemental, Fourier transform infrared, thermogravimetric, powder X-ray diffraction (PXRD), and single-crystal X-ray diffraction (XRD) structural analyses. Single-crystal XRD analysis revealed the presence of a 2D polymeric architecture, and topological analyses disclose a 2,4-connected binodal net. A thermochromic effect leads to the production of two new CPs, 1' and 2', by heating at ca. 220 °C, accompanied by a color change from orange to purple in the case of 1 and from blue to green in the case of 2. The transformation of 1 to 1' takes place through an intermediate (1a) with a different twist of the L^- ligand, leading to the formation of a 1D polymeric architecture, as proven by single-crystal XRD analysis. The addition of water or keeping 1' or 2' in air for several days leads to regeneration of 1 or 2, respectively. The thermochromic-triggered structural transformations of 1 and 2 were further substantiated by PXRD and UV-vis ground-state diffuse-reflectance absorption studies. The supercapacitance ability of the CPs 1 and 2 and a Ni-Co composite (made from mixing the CPs 1 and 2) was investigated by electroanalytical techniques, such as cyclic voltammetry and electrochemical impedance spectroscopy. The CP 2 exhibits the highest specific capacity of 273.8 C g^-1 at an applied current density of 1.5 A g^-1. These newly developed CPs further act as electrocatalysts for the water-splitting reaction.

Recent highlights and future prospects on mixed-metal MOFs as emerging supercapacitor candidates

Mixed-metal metal-organic frameworks (M-MOFs) consist of at least two different metal ions as nodes in the same framework. The incorporation of a second or more metal ions provides structural/compositional diversity, multi-functionality and stability to the framework. Moreover, the periodical array of different metal ions in the framework may alter the physical/chemical properties of M-MOFs and result in fascinating applications. M-MOFs with exciting structural features offer superior supercapacitor performances compared to single metal MOFs due to the synergic effect of different metal ions. In this review, we summarize several synthetic methods to construct M-MOFs by employing various organic ligands or metalloligands. Further, we discuss the electrochemical performance of several M-MOFs and their derived composite materials for supercapacitor applications.

Cellulose Nanofiber @ Conductive Metal-Organic Frameworks for High-Performance Flexible Supercapacitors

Conductive metal-organic frameworks (c-MOFs) show great potential in electrochemical energy storage thanks to their high electrical conductivity and highly accessible surface areas. However, there are significant challenges in processing c-MOFs for practical applications. Here, we report on the fabrication of c-MOF nanolayers on cellulose nanofibers (CNFs) with formation of nanofibrillar CNF@c-MOF by interfacial synthesis, in which CNFs serve as substrates for growth of c-MOF nanolayers. The obtained hybrid nanofibers of CNF@c-MOF can be easily assembled into freestanding nanopapers, demonstrating high electrical conductivity of up to 100 S cm^-1, hierarchical micromesoporosity, and excellent mechanical properties. Given these advantages, the nanopapers are tested as electrodes in a flexible and foldable supercapacitor. The high conductivity and hierarchical porous structure of the electrodes endow fast charge transfer and efficient electrolyte transport, respectively. Furthermore, the assembled supercapacitor shows extremely high cycle stability with capacitance retentions of >99% after 10000 continuous charge-discharge cycles. This work provides a pathway to develop flexible energy storage devices based on sustainable cellulose and MOFs.

Dual Functionalized CuMOF-Based Composite for High-Performance Supercapacitors

Herein, we utilized our previously reported highly porous CuMOF, {[Cu₂(L)(H₂O)₂]·(5DMF)·(4H₂O)}_n, decorated with amine and trifluoromethyl functional groups for energy storage application. This robust framework in CuMOF enhances the chemical and thermal stabilities as well as improves the interfacial binding interactions. The poor conductivity of CuMOF usually restricts its practical utility in energy storage systems, due to which rGO was introduced along with CuMOF to form a CuMOF/rGO composite (1) through a facile ultrasonication technique. The synergistic effects between CuMOF and rGO induce a dramatic enhancement in specific capacitance (462 F g^-1 at 0.8 A g^-1) of 1 with a cycle life of 93.75% up to 1000 cycles. The results highlight 1 as an emerging contestant for next generation supercapacitors.

Rational construction of triangle-like nickel-cobalt bimetallic metal-organic framework nanosheets arrays as battery-type electrodes for hybrid supercapacitors

Reasonably designing self-supported metal-organic framework (MOF) nanoarrays is profound for applications in energy storage and conversion. Herein, we construct a triangle-like nickel-cobalt bimetallic metal-organic framework nanosheet array on nickel foam (NiCo-MOF/NF) via facile one-step hydrothermal reaction, served as battery-like electrode material for hybrid supercapacitors. By adjusting the molar ratio of Ni and Co, the optimal NiCo-MOF/NF with Ni/Co = 3:2 (3-2 NiCo-MOF/NF) produces an impressive specific capacity of 1003.5 C/g (2230 F/g) at 1 A/g, surpassing most of the previously reported MOF based electrode materials. The superior electrochemical performances may be related to their 3D well-aligned MOF nanosheets arrays, which provides enlarged electroactive areas. Meanwhile, the tight junction of electrode materials and conductive substrate nickel foam (NF) can guarantee their sufficient electric contact, contributing to fast electron transfer from electrodes to conductive substrates. Finally, a hybrid supercapacitor fabricated by the 3-2 NiCo-MOF/NF against active carbon (AC) delivers an advantageous energy density of 34.3 Wh/kg at a power density of 375 W/kg. These results certificate that such bimetallic NiCo-MOF nanosheets arrays hold great potential as novel electrode materials for hybrid supercapacitors.

Isomerism in double-pillared-layer coordination polymers - structures and photoreactivity

The existence of isomerism in coordination polymeric structures offers opportunities to understand structure-function relationships. Herein the serendipitous isolation is reported of two isomeric double-pillared-layer coordination polymeric structures arising from two different types of carboxyl-ate bonding of benzene-1,4-di-carboxyl-ate ligands to zinc(II), which constitutes a new type of structural isomerism. The different bonding modes not only alter the shape and size of the pores, but also the nature of interpenetration and photoreactivity. Although two trans,cis,trans-bpeb ligands with conjugated olefin bonds are aligned in close proximity in both of the structures, one isomer undergoes a double [2 + 2] cyclo-addition reaction and the second isomer only offers an incomplete single cyclo-addition product. This work demonstrates how small changes in the structural connectivity can have an impact on the overall structural, physical and chemical properties of such materials.

A self-supported hierarchical Co-MOF as a supercapacitor electrode with ultrahigh areal capacitance and excellent rate performance

Hierarchical Co-MOF nanosheet-assembled hexagon-like microblocks serving as a supercapacitor electrode exhibits outstanding areal specific capacitance and Co-MOF/NF//AC achieves a high energy density of 1.7 mW h cm⁻² at 4.0 mW cm⁻².

Metal-Organic Framework-Derived Materials for Sodium Energy Storage

Recently, sodium-ion batteries (SIBs) are extensively explored and are regarded as one of the most promising alternatives to lithium-ion batteries for electrochemical energy conversion and storage, owing to the abundant raw material resources, low cost, and similar electrochemical behavior of elemental sodium compared to lithium. Metal-organic frameworks (MOFs) have attracted enormous attention due to their high surface areas, tunable structures, and diverse applications in drug delivery, gas storage, and catalysis. Recently, there has been an escalating interest in exploiting MOF-derived materials as anodes for sodium energy storage due to their fast mass transport resulting from their highly porous structures and relatively simple preparation methods originating from in situ thermal treatment processes. In this Review, the recent progress of the sodium-ion storage performances of MOF-derived materials, including MOF-derived porous carbons, metal oxides, metal oxide/carbon nanocomposites, and other materials (e.g., metal phosphides, metal sulfides, and metal selenides), as SIB anodes is systematically and completely presented and discussed. Moreover, the current challenges and perspectives of MOF-derived materials in electrochemical energy storage are discussed.

Formation of bimetallic metal–organic framework nanosheets and their derived porous nickel–cobalt sulfides for supercapacitors

Bimetallic metal–organic frameworks (Ni/Co-MOFs) with nanosheet-assembled flower-like structures as well as their derived Ni–Co–S electrode showed higher specific capacitances and excellent cycling stability.

High-performance supercapacitors of Cu-based porous coordination polymer nanowires and the derived porous CuO nanotubes

Electrode materials for supercapacitors with one-dimensional porous nanostructures, such as nanowires and nanotubes, are very attractive for high-efficiency storage of electrochemical energy. Herein, ultralong Cu-based porous coordination polymer nanowires (copper-l-aspartic acid) were used as the electrode material for supercapacitors, for the first time. The as-prepared material exhibits a high specific capacitance of 367 F g^-1 at 0.6 A g^-1 and excellent cycling stability (94% retention over 1000 cycles). Moreover, porous CuO nanotubes were successfully fabricated by the thermal decomposition of this nanowire precursor. The CuO nanotube exhibits good electrochemical performance with high rate capacity (77% retention at 12.5 A g^-1) and long-term stability (96% retention over 1000 cycles). The strategy developed here for the synthesis of porous nanowires and nanotubes can be extended to the construction of other electrode materials for more efficient energy storage.

Benzoate Acid-Dependent Lattice Dimension of Co-MOFs and MOF-Derived CoS2@CNTs with Tunable Pore Diameters for Supercapacitors

Herein three novel cobalt metal-organic frameworks (Co-MOFs) with similar ingredients, [Co(bib)(o-bdc)]_∞ (1), [Co₂(bib)₂(m-bdc)₂]_∞ (2), and {[Co(bib)(p-bdc)(H₂O)](H₂O)_0.5}_∞ (3), have been synthesized from the reaction of cobalt nitrate with 1,4-bis(imidazol-1-yl)benzene (bib) and structure-related aromatic acids (1,2-benzenedicarboxylic acid = o-bdc, 1,3-benzenedicarboxylic acid = m-bdc, and 1,4-benzenedicarboxylic acid = p-bdc) by the solvothermal method. It is aimed to perform systematic research on the relationship among the conformation of benzoate acid, lattice dimension of Co-MOF, and pore diameter of MOF-derived carbon composite. Through the precursor strategy, Co-MOFs 1-3 have been utilized to synthesize porous cobalt@carbon nanotube composites (Co@CNTs). After the in situ gas-sulfurization, secondary composites CoS₂@CNTs were successfully obtained, which kept similar morphologies of corresponding Co@CNTs without destroying previous highly dispersed structures. Co-MOFs and two series of composites (Co@CNTs and CoS₂@CNTs) have been well characterized. Topology and Brunauer-Emmett-Teller analyses elucidate that the bdc^2- ion could control the pore diameters of MOF-derived carbon composites by adjusting the lattice dimension of Co-MOFs. The systematic studies on electrochemical properties demonstrate that (p)-CoS₂@CNT possesses hierarchical morphology, moderate specific surface area, proper pore diameter distribution, and high graphitization, which lead to remarkable specific capacitances (839 F g^-1 at 5 mV s^-1 and 825 F g^-1 at 0.5 A g^-1) in 2 M potassium hydroxide solution. In addition, the (p)-CoS₂@CNT electrode exhibits good electrochemical stability and still retains 82.9% of initial specific capacitance at the current density of 1 A g^-1 after 5000 cycles.

Recent Progress in Metal-Organic Frameworks and Their Derived Nanostructures for Energy and Environmental Applications

Metal-organic frameworks (MOFs), as a very promising category of porous materials, have attracted increasing interest from research communities due to their extremely high surface areas, diverse nanostructures, and unique properties. In recent years, there is a growing body of evidence to indicate that MOFs can function as ideal templates to prepare various nanostructured materials for energy and environmental cleaning applications. Recent progress in the design and synthesis of MOFs and MOF-derived nanomaterials for particular applications in lithium-ion batteries, sodium-ion batteries, supercapacitors, dye-sensitized solar cells, and heavy-metal-ion detection and removal is reviewed herein. In addition, the remaining major challenges in the above fields are discussed and some perspectives for future research efforts in the development of MOFs are also provided.

A proton-hopping charge storage mechanism of ionic one-dimensional coordination polymers for high-performance supercapacitors

A proton-conducting coordination polymer of Zn²⁺ phosphate and protonated imidazole has been used as a novel supercapacitor material in aqueous electrolytes.

Interpenetrated Double Pillared-Layer CoII MOFs with pcu Topology

Three double pillared-layer CoII metal–organic frameworks (MOFs) with a pcu topology of a long, conformationally flexible, dipyridyl spacer ligand, 1,4-bis[2-(4-pyridyl)ethenyl]benzene (bpeb), and aromatic dicarboxylates (1,4-benzenedicarboxylate (bdc), 2,6-naphthalenedicarboxylate (ndc), and biphenyl-4,4′-dicarboxylate (bpdc)) have been synthesised and structurally characterised by X-ray crystallography. The MOFs are denoted as [Co2(bpeb)2(bdc)2]·DMF·3H2O (1), [Co2(bpeb)2(ndc)2]·1.75DMF·3.75H2O (2), and [Co2(bpeb)2(bpdc)2]·3.5DMF·4H2O (3). In the dinuclear repeating unit, four carboxylates are bonded to two CoII atoms forming a (4,4) layer structure. The axial positions are occupied by bpeb ligands. Of these, 1 and 2 have 2-fold interpenetration, whereas 3 displays 3-fold interpenetration. The two bpeb space ligands in 1 have trans,trans,trans and trans,cis,trans conformations. In contrast, the bpeb ligands in 2 and 3 have a trans,cis,trans conformation. Although the olefin groups in two adjacent bpeb ligands, as the double pillars in 2 and 3, satisfy the conditions for photo-dimerisation to occur, they are photo-inactive. The conformational changes of bpeb, bonding modes of the dicarboxylates, and pore sizes in these double pillared-layer compounds have been discussed.

Layered manganese-based metal–organic framework as a high capacity electrode material for supercapacitors

The layered Mn-based metal–organic framework (Mn-LMOF) displayed good performance as an electrode material for supercapacitors.

In-Situ Fabrication of Graphene Oxide Hybrid Ni-Based Metal-Organic Framework (Ni-MOFs@GO) with Ultrahigh Capacitance as Electrochemical Pseudocapacitor Materials

This paper reports a series of novel Ni-based metal-organic framework (Ni-MOFs) prepared by a facile solvothermal process. The synthetic conditions have great effects on the Ni-MOFs morphologies, porous textures, and their electrochemical performance. Improved capacitance performance was successfully realized by the in-situ hybrid of Ni-MOFs with graphene oxide (GO) nanosheets (Ni-MOFs@GO). The pseudocapacitance of ca. 1457.7 F/g for Ni-MOFs obtained at 180 °C with HCl as the modulator was elevated to ca. 2192.4 F/g at a current density of 1 A/g for the Ni-MOFs@GO with GO contents of 3 wt %. Additionally, the capacitance retention was also promoted from ca. 83.5% to 85.1% of its original capacitance at 10 A/g even after 3000 cycles accordingly. These outstanding electrochemical properties of Ni-based MOF materials may be related to their inherent characteristics, such as the unique flower-like architecture and fascinating synergetic effect between the Ni-MOFs and the GO nanosheets.

Cobalt-Based Layered Metal-Organic Framework as an Ultrahigh Capacity Supercapacitor Electrode Material

Metal-organic frameworks (MOFs) have recently received increasing interest due to their potential application in the energy storage and conversion field. Herein, cobalt-based layered MOF ({[Co(Hmt)(tfbdc)(H2O)2]·(H2O)2}n, Co-LMOF; Hmt = hexamethylenetetramine; H2tfbdc = 2,3,5,6-tetrafluoroterephthalic acid) has been evaluated as an electrode material for supercapacitors. The Co-LMOF electrode exhibits a high specific capacitance and excellent cycling stability. Its maximum specific capacitance is 2474 F g(-1) at a current density of 1 A g(-1), and the specific capacitance retention is about 94.3% after 2000 cycles. The excellent electrochemical property may be ascribed to the intrinsic nature of Co-LMOF, enough space available for the storage and diffusion of the electrolyte, and the particles of nanoscale size.

High performance electrochemical capacitor materials focusing on nickel based materials

Of the two major capacitances contributing to electrochemical storage devices, pseudo-capacitance, which results from the reversible faradaic reactions, can be much higher than the electric double layer capacitance.

Carbon nanotubes@metal–organic frameworks as Mn-based symmetrical supercapacitor electrodes for enhanced charge storage

A hybrid material of carbon nanotubes (CNTs) and Mn-based metal organic frameworks (Mn-MOF) was synthesized and used as a Mn-based supercapacitor electrode material.