Efficient [Fe-Imidazole@SiO2] Nanohybrids for Catalytic H2 Production from Formic Acid

Three imidazole-based hybrid materials, coded as IGOPS, IPS and impyridine@SiO₂ nanohybrids, were prepared via the covalent immobilization of N-ligands onto a mesoporous nano-SiO₂ matrix for H₂ generation from formic acid (FA). BET and HRTEM demonstrated that the immobilization of the imidazole derivative onto SiO₂ has a significant effect on the SSA, average pore volume, and particle size distribution. In the context of FA dehydrogenation, their catalytic activity (TONs, TOFs), stability, and reusability were assessed. Additionally, the homologous homogeneous counterparts were evaluated for comparison purposes. Mapping the redox potential of solution E_h vs. SHE revealed that poly-phosphine PP₃ plays an essential role in FA dehydrogenation. On the basis of performance and stability, [Fe²⁺/IGOPS/PP₃] demonstrated superior activity compared to other heterogeneous catalysts, producing 9.82 L of gases (VH₂ + CO₂) with TONs = 31,778, albeit with low recyclability. In contrast, [Fe²⁺/IPS/PP₃] showed the highest stability, retaining considerable performance after three consecutive uses. With VH₂ + CO₂ = 7.8 L, [Fe²⁺/impyridine@SiO₂/PP₃] activity decreased, and it was no longer recyclable. However, the homogeneous equivalent of [Fe²⁺/impyridine/PP₃] was completely inactive. Raman, FT/IR, and UV/Vis spectroscopy demonstrated that the reduced recyclability of [Fe²⁺/IGOPS/PP₃] and [Fe²⁺/impyridine@SiO₂/PP₃] nanohybrids is due to the reductive cleavage of their C-O-C bonds during catalysis. An alternative grafting procedure is proposed, applying here to the grafting of IPS, resulting in its higher stability. The accumulation of water derived from substrate's feeding causes the inhibition of catalysis. In the case of [Fe²⁺-imidazole@SiO₂] nanohybrids, simple washing and drying result in their re-activation, overcoming the water inhibition. Thus, the low-cost imidazole-based nanohybrids IGOPS and IPS are capable of forming [Fe²⁺/IGOPS/PP₃] and [Fe²⁺/IPS/PP₃] heterogeneous catalytic systems with high stability and performance for FA dehydrogenation.

A ligand design strategy to enhance catalyst stability for efficient formic acid dehydrogenation

New Ir complexes bearing N-(methylsulfonyl)-2-pyridinecarboxamide (C1) and N-(phenylsulfonyl)-2-pyridinecarboxamide (C2) were employed as catalysts for aqueous formic acid dehydrogenation (FADH). The ligands were designed to maintain the picolinamide skeleton and introduce strong sigma sulfonamide moieties. C1 and C2 exhibited good stability towards air and concentrated formic acid (FA). During 20 continuous cycles, C1 and C2 could achieve the complete conversion of FA with TONs of 172 916 and 172 187, respectively. C1 achieved a high TOF of 19 500 h^-1 at 90 °C and an air-stable Ir-H species was observed by ¹H NMR spectroscopy.

Controlled synthesis of Ru-single-atoms on ordered mesoporous phosphine polymers for microwave-assisted conversion of biomass-derived sugars to artificial sweeteners

Atomically dispersed metal-single-atoms have become a frontier in solid catalysis due to their characteristic electronic properties. However, for biomass conversion, employing metal-single-atoms as catalysts is rather challenging since they suffer from poor selectivity and yield due to inadequate metal-support interactions. We show here that Ru/triphenylphosphine (PPh)-based ordered mesoporous polymers afford high yields of reduced sugars, xylitol (yield ∼95%) and sorbitol (yield ∼65%) in a microwave reactor with formic acid as the only hydrogen donor. We have established a unique relationship within Ru/triphenylphosphine that shows an important ligand effect, in contrast to, Ru/triphenylamine and Ru/catechol. The tailored electronic properties in Ru/phosphine were thoroughly examined by using state-of-the-art experimental techniques viz. EXAFS, XANES, XPS, DRIFTS and HAADF-STEM. The resulting phosphine-modified catalysts show a promotion in activity and selectivity towards less vulnerable aldehydes for hydrogenation, further confirmed by DFT calculations. This finding reveals a new protocol to tailor the activity of metal-single-atoms utilizing functional porous polymers as nanoreactors.

Recent progress in homogeneous hydrogenation of carbon dioxide to methanol

The requirement of running a new generation of fuel production is inevitable due to the limitation of oil production from reservoirs. On the other hand, enhancing the CO2 concentration in the atmosphere brings global warming phenomenon and leads to catastrophic disasters such as drought and flooding. Conversion of carbon dioxide to methanol can compensate for the liquid fuel requirement and mitigate CO2 emissions to the atmosphere. In this review, we surveyed the recent works on homogeneous hydrogenation of CO2 to CH3OH and investigated the experimental results in detail. We categorized the CO2 hydrogenation works based on the environment of the reaction, including neutral, acidic, and basic conditions, and discussed the effects of solvents’ properties on the experimental results. This review provides a perspective on the previous studies in this field, which can assist the researchers in selecting the proper catalyst and solvent for homogenous hydrogenation of carbon dioxide to methanol.

Formic Acid as a Potential On-Board Hydrogen Storage Method: Development of Homogeneous Noble Metal Catalysts for Dehydrogenation Reactions

Hydrogen can be used as an energy carrier for renewable energy to overcome the deficiency of its intrinsically intermittent supply. One of the most promising application of hydrogen energy is on-board hydrogen fuel cells. However, the lack of a safe, efficient, convenient, and low-cost storage and transportation method for hydrogen limits their application. The feasibility of mainstream hydrogen storage techniques for application in vehicles is briefly discussed in this Review. Formic acid (FA), which can reversibly be converted into hydrogen and carbon dioxide through catalysis, has significant potential for practical application. Historic developments and recent examples of homogeneous noble metal catalysts for FA dehydrogenation are covered, and the catalysts are classified based on their ligand types. The Review primarily focuses on the structure-function relationship between the ligands and their reactivity and aims to provide suggestions for designing new and efficient catalysts for H₂ generation from FA.

Highly efficient additive-free dehydrogenation of neat formic acid

Formic acid (FA) is a promising hydrogen carrier which can play an instrumental role in the overall implementation of a hydrogen economy. In this regard, it is important to generate H₂ gas from neat FA without any solvent/additive, for which existing systems are scarce. Here we report the remarkable catalytic activity of a ruthenium 9H-acridine pincer complex for this process. The catalyst is unusually stable and robust in FA even at high temperatures and can catalyse neat FA dehydrogenation for over a month, with a total turnover number of 1,701,150, while also generating high H₂/CO₂ gas pressures (tested up to 100 bars). Mechanistic investigations and DFT studies are conducted to fully understand the molecular mechanism to the process. Overall, the high activity, stability, selectivity, simplicity and versatility of the system to generate a CO-free H₂/CO₂ gas stream and high pressure from neat FA makes it promising for large-scale implementation.

Unraveling the catalytically preferential pathway between the direct and indirect hydrogenation of CO2 to CH3OH using N-heterocyclic carbene-based Mn(i) catalysts: a theoretical approach

The mechanistic investigation of direct vs. indirect CO₂ hydrogenation to methanol using single molecular NHC-based Mn(i) complexes.

A One-Step Preparation of Tetradentate Ligands with Nitrogen and Phosphorus Donors by Reductive Amination and Representative Iron Complexes

The synthesis and use of the first examples of unsymmetrical, mixed phosphine donor tripodal NPP₂' ligands N(CH₂CH₂PR₂)₂(CH₂CH₂PPh₂) are presented. The ligands are synthesized via a convenient, one pot reductive amination using 2-(diphenylphosphino)ethylamine and various substituted phosphonium dimers in order to introduce mixed phosphine donors substituted with P/P', those being Ph/Cy (2), Ph/ⁱPr (3), Ph/ⁱBu (4), Ph/o-Tol (5), and Ph/p-Tol (6). Additionally, we have developed the first known synthesis of a symmetrical tripodal NP₃ ligand N(CH₂CH₂PiBu₂)₃ using bench safe ammonium acetate as the lone nitrogen source (7). This new protocol eliminates the use of extremely dangerous nitrogen mustard reagents typically required to synthesize NP₃ ligands. Some of these tetradentate ligands and also P₂NN' ligands N(CH₂-o-C₅H₄N)(CH₂CH₂PR₂)₂ (P₂NN'-Cy, R = Cy; P₂NN'-Ph, R = Ph) prepared by reductive amination using 2-picolylamine are used in the synthesis and reactions of iron complexes. FeCl₂(P₂NN'-Cy) (8) undergoes single halide abstraction with NaBPh₄ to give the trigonal bipyramidal complex [FeCl(P₂NN'-Cy)][BPh₄] (9). Upon exposure to CO(g), complex 9 readily coordinates CO giving [FeCl(P₂NN'-Cy)(CO)][BPh₄] (10), and further treatment with an excess of NaBH₄ results in formation of the hydride complex [Fe(H)(P₂NN'-Cy)(CO)][BPh₄] (11). Our previously reported complex FeCl₂(P₂NN'-Ph) undergoes double halide abstraction with NaBPh₄ in the presence of the coordinating solvent to give [Fe(NCMe)₂(P₂NN'-Ph)][BPh₄]₂ (12). Ligand 3 can be coordinated to FeCl₂, and upon sequential halide abstraction, treatment with NaBH₄, and exposure to an atmosphere of dinitrogen, the dinitrogen hydride complex [Fe(H)(NPP₂'-ⁱPr)(N₂)][BPh₄] (13) is isolated. Our symmetrical NP₃ ligand 7 can also be coordinated to FeCl₂ and, upon exposure to an atmosphere of CO(g), selectively forms [FeCl(NP₃)(CO)][BPh₄] (14) after salt metathesis with NaBPh₄. Complex 14 can be treated with an excess of NaBH₄ to give the hydride complex [Fe(H)(NP₃)(CO)][BPh₄] (15), which can further be deprotonated/reduced to the Fe(0) complex Fe(NP₃)(CO) (16) upon treatment with an excess of KH.

Ruthenium-catalyzed hydrogenation of CO2 as a route to methyl esters for use as biofuels or fine chemicals

A novel robust diphosphine–ruthenium(ii) complex has been developed that can efficiently catalyze both the hydrogenation of CO₂ to methanol and its in situ condensation with carboxylic acids to give methyl esters.

Towards Hydrogen Storage through an Efficient Ruthenium-Catalyzed Dehydrogenation of Formic Acid

Hydrogen is of fundamental importance for the construction of modern clean-energy supply systems. In this context, the catalytic dehydrogenation of formic acid (FA) is a convenient method to generate H₂ gas from an easily available liquid. One of the issues associated with current catalytic dehydrogenation systems is insufficient stability. Here, we present a robust and recyclable system for FA dehydrogenation by combining a ruthenium 1,1,1-tris(diphenylphosphinomethyl)ethane complex and aluminum trifluoromethanesulfonate (Al(OTf)₃ ). This robust system allows steady H₂ production under pressure and recycling for an additional 14 runs without any apparent loss of activity (turnover frequencies up to 1920 h^-1 , turnover numbers up to 20 000). Notably, the catalyst can also be used for the dehydrogenation of formates and the reverse hydrogenation of bicarbonates and CO₂ .

Iridium-based hydride transfer catalysts: from hydrogen storage to fine chemicals

Selective hydrogen transfer remains a central research focus in catalysis: hydrogenation and dehydrogenation have central roles, both historical and contemporary, in all aspects of fuel, agricultural, pharmaceutical, and fine chemical synthesis. Our lab has been involved in this area by designing homogeneous catalysts for dehydrogenation and hydrogen transfer that fill needs ranging from on-demand hydrogen storage to fine chemical synthesis. A keen eye toward mechanism has enabled us to develop systems with excellent selectivity and longevity and demonstrate these in a diversity of high-value applications. Here we describe recent work from our lab in these areas that are linked by a central mechanistic trichotomy of catalyst initiation pathways that lead highly analogous precursors to a diversity of useful applications.

Synthetic routes to a coordinatively unsaturated ruthenium complex supported by a tripodal, protic bis(N-heterocyclic carbene) phosphine ligand

A facile, one pot synthesis of a coordinatively unsaturated ruthenium complex supported by a tripodal, protic bis(N-heterocyclic carbene) phosphine ligand is presented. A number of coordination complexes were discovered en route during this synthesis, revealing some of the unique aspects of complexes ligated by this type of tridentate, protic bis(NHC) ligand. Through a combination of 1D and 2D NMR spectroscopic analysis and single crystal X-ray diffraction, we reveal the intermediacy of phosphine-ligated bisimidazole complexes and show that abstraction of inner-sphere halide ions facilitates conversion to the desired tridentate bis(NHC) coordination mode. Ultimately the use of N-methyl-2-pyrrolidone is shown to enable the use of the extreme temperatures needed to facilitate the direct, thermally activated tautomerization reaction that gives rise to the bis(NHC) motif.

DFT study of CO2 hydrogenation catalyzed by a cobalt-based system: an unexpected formate anion-assisted deprotonation mechanism

An unexpected formate anion-assisted deprotonation mechanism is unfolded by a DFT study of CO₂ hydrogenation catalyzed by a cobalt-based system.

Ruthenium PNN(O) Complexes: Cooperative Reactivity and Application as Catalysts for Acceptorless Dehydrogenative Coupling Reactions

The novel tridentate PNNOH pincer ligand LH features a reactive 2-hydroxypyridine functionality as well as a bipyridyl-methylphosphine skeleton for meridional coordination. This proton-responsive ligand coordinates in a straightforward manner to RuCl(CO)(H)(PPh3)3 to generate complex 1. The methoxy-protected analogue LMe was also coordinated to Ru(II) for comparison. Both species have been crystallographically characterized. Site-selective deprotonation of the 2-hydroxypyridine functionality to give 1' was achieved using both mild (DBU) and strong bases (KOtBu and KHMDS), with no sign of involvement of the phosphinomethyl side arm that was previously established as the reactive fragment. Complex 1' is catalytically active in the dehydrogenation of formic acid to generate CO-free hydrogen in three consecutive runs as well as for the dehydrogenative coupling of alcohols, giving high conversions to different esters and outperforming structurally related PNN ligands lacking the NOH fragment. DFT calculations suggest more favorable release of H2 through reversible reactivity of the hydroxypyridine functionality relative to the phosphinomethyl side arm.

Spectroscopic and reactivity differences in metal complexes derived from sulfur containing Triphos homologs

Spectroscopic, computational, and reactivity studies shed light on the different coordination behavior of sulfur containing Triphos derived complexes.

PdAu bimetallic nanoparticles anchored on amine-modified mesoporous ZrSBA-15 for dehydrogenation of formic acid under ambient conditions

Highly active catalysts for the dehydrogenation of formic acid were screened by using different amine-modified ZrSBA-15 as supports.

Selective Catalytic Synthesis Using the Combination of Carbon Dioxide and Hydrogen: Catalytic Chess at the Interface of Energy and Chemistry

The present Review highlights the challenges and opportunities when using the combination CO2 /H2 as a C1 synthon in catalytic reactions and processes. The transformations are classified according to the reduction level and the bond-forming processes, covering the value chain from high volume basic chemicals to complex molecules, including biologically active substances. Whereas some of these concepts can facilitate the transition of the energy system by harvesting renewable energy into chemical products, others provide options to reduce the environmental impact of chemical production already in today's petrochemical-based industry. Interdisciplinary fundamental research from chemists and chemical engineers can make important contributions to sustainable development at the interface of the energetic and chemical value chain. The present Review invites the reader to enjoy this exciting area of "catalytic chess" and maybe even to start playing some games in her or his laboratory.

A prolific catalyst for dehydrogenation of neat formic acid

Formic acid is a promising energy carrier for on-demand hydrogen generation. Because the reverse reaction is also feasible, formic acid is a form of stored hydrogen. Here we present a robust, reusable iridium catalyst that enables hydrogen gas release from neat formic acid. This catalysis works under mild conditions in the presence of air, is highly selective and affords millions of turnovers. While many catalysts exist for both formic acid dehydrogenation and carbon dioxide reduction, solutions to date on hydrogen gas release rely on volatile components that reduce the weight content of stored hydrogen and/or introduce fuel cell poisons. These are avoided here. The catalyst utilizes an interesting chemical mechanism, which is described on the basis of kinetic and synthetic experiments.

Formic acid as a hydrogen storage material – development of homogeneous catalysts for selective hydrogen release

Liquid energy: formic acid is an ideal candidate for catalytic release and storage of hydrogen.

Hydrogen energy future with formic acid: a renewable chemical hydrogen storage system

Formic acid, the simplest carboxylic acid, could serve as one of the better fuels for portable devices, vehicles and other energy-related applications in the future.

An active, stable and recyclable Ru(ii) tetraphosphine-based catalytic system for hydrogen production by selective formic acid dehydrogenation

Efficient catalytic formic acid dehydrogenation was achieved with Ru(ii) complexes ofmeso-tetraphos-1 under batch and continuous feed conditions.