The application of hydrogels for enamel remineralization

Enamel is composed of numerous uniformly wide, well-oriented hydroxyapatite crystals. It possesses an acellular structure that cannot be repaired after undergoing damage. Therefore, remineralization after enamel defects has become a focal point of research. Hydrogels, which are materials with three-dimensional structures derived from cross-linking polymers, have garnered significant attention in recent studies. Their exceptional properties make them valuable in the application of enamel remineralization. In this review, we summarize the structure and formation of enamel, present the design considerations of hydrogels for enamel remineralization, explore diverse hydrogels types in this context, and finally, shed light on the potential future applications in this field.

Nano-laponite encapsulated coaxial fiber scaffold promotes endochondral osteogenesis

Osteoinductive supplements without side effects stand out from the growth factors and drugs widely used in bone tissue engineering. Lithium magnesium sodium silicate hydrate (laponite) nanoflake is a promising bioactive component for bone regeneration, attributed to its inherent biosafety and effective osteoinductivity. Up to now, the in vivo osteogenic potential and mechanisms of laponite-encapsulated fibrous membranes remain largely unexplored. This study presents a unique method for homogeneously integrating high concentrations of laponite RDS into a polycaprolactone (PCL) matrix by dispersing laponite RDS sol into the polymer solution. Subsequently, a core-shell fibrous membrane (10RP-PG), embedding laponite-loaded PCL in its core, was crafted using coaxial electrospinning. The PCL core's slow degradation and the shell's gradient degradation enabled the sustained release of bioactive ions (Si and Mg) from laponite. In vivo studies on a critical-sized calvarial bone defect model demonstrated that the 10RP-PG membrane markedly enhanced bone formation and remodeling by accelerating the process of endochondral ossification. Further transcriptome analysis suggested that osteogenesis in the 10RP-PG membrane is driven by Mg and Si from endocytosed laponite, activating pathways related to ossification and endochondral ossification, including Hippo, Wnt and Notch. The fabricated nanocomposite fibrous membranes hold great promise in the fields of critical-sized bone defect repair.

Bone ECM-inspired biomineralization chitin whisker liquid crystal hydrogels for bone regeneration

As a particular cell niche, natural bone extracellular matrix (ECM) is an organic-inorganic composite material formed by mineralization of liquid crystal (LC) collagen fiber network. However, designing bone repair materials that highly imitate the LC characteristic and composite components of natural bone ECM is a great challenge. Here, we report a novel kind of bone ECM-inspired biomineralization chitin whisker LC hydrogels. First, photocurable chitin whisker LC hydrogels with bone ECM-like chiral nematic LC state and viscoelasticity are created. Next, biomineralization, guided by LC hydrogels, is carried out to truly mimic the mineralization process of natural bone, so as to obtain the organic-inorganic composite materials with bone ECM-like microenvironment. The chitin whisker LC hydrogels exhibit superior biomineralization, protein adsorption and osteogenesis ability, more importantly, LC hydrogel with negatively charged -COOH groups is more conducive to biomineralization and shows more desirable osteogenic activity than that with positively charged -NH₂ groups. Notably, compared with the pristine LC hydrogels, the biomineralization LC hydrogels display more favorable osteogenesis ability due to their bone ECM-like LC texture and bone-like hydroxyapatite. This study opens an avenue toward the design of bone ECM-inspired biomineralization chitin whisker LC hydrogels for bone regeneration.

Cooperative Calcium Phosphate Deposition on Collagen-Inspired Short Peptide Nanofibers for Application in Bone Tissue Engineering

In recent years, immense attention has been devoted over the production of osteoinductive materials. To this direction, collagen has a dominant role in developing hard tissues and plays a crucial role in the biomineralization of these tissues. Here, we demonstrated for the first time the potential of the shortest molecular pentapeptide domain inspired from collagen toward mineralizing hydroxyapatite on peptide fibers to develop bone-filling material. Our simplistic approach adapted the easy and facile route of introducing the metal ions onto the peptide nanofibers, displaying adsorbed glutamate onto the surface. This negatively charged surface further induces the nucleation of the crystalline growth of hydroxyapatite. Interestingly, nucleation and growth of the hydroxyapatite crystals lead to the formation of a self-supporting hydrogel to construct a suitable interface for cellular interactions. Furthermore, microscopic and spectroscopic investigations revealed the crystalline growth of the hydroxyapatite onto peptide fibers. The physical properties were also influenced by this crystalline deposition, as evident from the hierarchical organization leading to hydrogels with enhanced mechanical stiffness and improved thermal stability of the scaffold. Furthermore, the mineralized peptide fibers were highly compatible with osteoblast cells and showed increased cellular biomarkers production, which further reinforced the potential application toward effectively fabricating the grafts for bone tissue engineering.

Mineralization of Biomaterials for Bone Tissue Engineering

Mineralized biomaterials have been demonstrated to enhance bone regeneration compared to their non-mineralized analogs. As non-mineralized scaffolds do not perform as well as mineralized scaffolds in terms of their mechanical and surface properties, osteoconductivity and osteoinductivity, mineralization strategies are promising methods in the development of functional biomimetic bone scaffolds. In particular, the mineralization of three-dimensional (3D) scaffolds has become a promising approach for guided bone regeneration. In this paper, we review the major approaches used for mineralizing tissue engineering constructs. The resulting scaffolds provide minerals chemically similar to the inorganic component of natural bone, carbonated apatite, Ca5(PO4,CO3)3(OH). In addition, we discuss the characterization techniques that are used to characterize the mineralized scaffolds, such as the degree of mineralization, surface characteristics, mechanical properties of the scaffolds, and the chemical composition of the deposited minerals. In vitro cell culture studies show that the mineralized scaffolds are highly osteoinductive. We also summarize, based on literature examples, the applications of 3D mineralized constructs, as well as the rationale behind their use. The mineralized scaffolds have improved bone regeneration in animal models due to the enhanced mechanical properties and cell recruitment capability making them a preferable option for bone tissue engineering over non-mineralized scaffolds.

Highly Mineralized Biomimetic Polysaccharide Nanofiber Materials Using Enzymatic Mineralization

Many biological high-performance composites, such as bone, antler, and crustacean cuticles, are composed of densely mineralized and ordered nanofiber materials. The mimicry of even simplistic bioinspired structures, i.e., of densely and homogeneously mineralized nanofibrillar materials with controllable mechanical performance, continues to be a grand challenge. Here, using alkaline phosphatase as an enzymatic catalyst, we demonstrate the dense, homogeneous, and spatially controlled mineralization of calcium phosphate nanostructures within networks of anionically charged cellulose nanofibrils (CNFs) and cationically charged chitin nanofibrils (ChNFs)-both emerging biobased nanoscale building blocks for sustainable high-performance materials design. Our study reveals that anionic CNFs lead to a more homogeneous nanoscale mineralization with very high mineral contents up to ca. 70 wt % with a transition from amorphous to crystalline deposits, while cationic ChNFs yield rod-like crystalline morphologies. The bone-inspired CNF bulk films exhibit a significantly increased stiffness, maintain good flexibility and translucency, and have a significant gain in wet state mechanical properties. The mechanical properties can be tuned both by the enzyme concentration and the mineralization time. Moreover, we also show a spatial control of the mineralization using kinetically controlled substrate uptake in a dialysis reactor, and by spatially selectively incorporating the enzyme into 2D printed filament patterns. The strategy highlights possibilities for spatial encoding of enzymes in tailored structures and patterns and programmed mineralization processes, promoting the potential application of mineralized CNF biomaterials with complex gradients for bone substitutes and tissue regeneration in general.

DNA-mediated biomineralization of calcium-deficient hydroxyapatite for bone tissue engineering

A random DNA duplex was utilized as the biotemplate to mediate the biomineralization of calcium-deficient hydroxyapatite with osteoconductive properties.

Bisphosphonic Acid-Functionalized Cross-Linkers to Tailor Hydrogel Properties for Biomedical Applications

Two bisphosphonic acid-functionalized cross-linkers (one novel) with different spacer chain characteristics were synthesized and incorporated into hydrogels by copolymerization with 2-hydroxyethyl methacrylate at different ratios to control the hydrogels' swelling, mechanical properties, and ability to support mineralization for biomedical applications. The cross-linkers were synthesized by reaction of 2-isocyanatoethyl methacrylate and bisphosphonated diamines followed by selective dealkylation of the bisphosphonate ester groups. The hydrogels provide in vitro growth of carbonated apatite, morphology affected by the cross-linker structure. The hydrogels exhibit a high Young's modulus E (up to 400 kPa) and can sustain up to 10.2 ± 0.1 MPa compressive stresses. E and hence the cross-link density significantly increases upon mineralization reflecting the formation of many bisphosphonate BP-Ca2+ bonds acting as additional cross-links. Cyclic mechanical tests reveal self-recoverability of hydrogels because of reversible nature of BP-Ca2+ bonds. The results suggest that these cross-linkers can add calcium-binding abilities to hydrogels synthesized from any monomer and improve their mechanical, swelling, and mineralization properties and hence are potentially useful materials for biomedical applications.

Synergistic combination of natural bioadhesive bael fruit gum and chitosan/nano-hydroxyapatite: A ternary bioactive nanohybrid for bone tissue engineering

In this work, we have explored the polysaccharide nature of bael fruit gum (BFG) motivated from the current findings about the substantial role of the polysaccharides in bone tissue engineering. The nanocomposite scaffold (CSH-BFG) was prepared by blending BFG, nano-hydroxyapatite (n-HA) and chitosan (CS) by co-precipitation approach and compared with n-HA and CS binary system (CSH). The analysis of different properties was carried out by SEM, TEM, FTIR, XRD and mechanical testing. The CSH-BFG scaffolds revealed a rough morphology and uniform distribution of particles along with strong chemical interactions among different components compared to the CSH scaffold. The incorporation of BFG in the scaffold resulted in significant increase of the compressive strength, compressive modulus, protein adsorption, biodegradation and swelling behaviour. The ternary system exhibited superior antibacterial activity against different bacterial pathogens compared to the binary system. The in vitro biomineralization ability was elucidated from the formation of thick apatite layer complementing the result of ARS study in the CSH-BFG nanocomposite. Our findings also revealed that BFG reinforced CSH nanocomposite exhibited enhanced cell adhesion and proliferation, osteogenic differentiation along with phenomenal cytocompatibility. Overall, our results signified that the fabricated CSH-BFG nanocomposite carries enormous potential to be applied in the bone remodelling procedures.

Fabrication and biological properties of calcium phosphate/chitosan composite coating on titanium in modified SBF

In order to increase the biocompatibility and bioactivity of chitosan, hydroxyapatite was in situ combined into the spin-coated chitosan layer on the titanium substrate by incubating in modified simulated body fluid (m-SBF). The calcium phosphate/chitosan (CaP/CS) composite prepared in m-SBF showed a homogeneous distribution of spherical nano-clusters. The hydrophilicity of the coatings was increased by performing NaOH post-treatment of CaP/CS composites, which also affected apatite formation. Biocompatibility of the coatings was assessed by investigating the cellular response of human osteoblast-like MG-63 cells with 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay. Cell adhesion and osteogenic properties of the mesoporous CaP/CS composite were evaluated by SEM and ALPase assay, respectively. This in vitro study showed improved cell adhesion and differentiation on nanostructured CaP/CS composites. These results indicate that this CaP/CS composite could be a promising candidate for bone tissue engineering.

Synthesis of Biocompatible Hydroxyapatite Using Chitosan Oligosaccharide as a Template

In this study, a novel biocompatible hydroxyapatite (HA) was synthesized by using chitosan oligosaccharide (COS) as a template. These HA samples were studied by Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy (TEM). The biocompatibility of HA samples was evaluated via cell viability, cell morphology and alkaline phosphatase staining of MG-63 cell lines. The results show that HA synthesized in the presence of COS was favorable to proliferation and osteogenic differentiation of MG-63 cells. These hydroxyapatites are potentially attractive biomaterials for bone tissue engineering applications.

Continuous expansion of the interplanar spacing of octacalcium phosphate by incorporation of dicarboxylate ions with a side chain

We investigate the (100) interplanar spacing expansion behavior of octacalcium phosphate (OCP), revealing that OCP shows continuous and non-continuous interplanar spacing expansion upon incorporation of mercaptosuccinate and succinate ions, respectively.

Synthesis of organic–inorganic hybrid microcapsules through in situ generation of an inorganic layer on an adhesive layer with mineralization-inducing capability

A facile and efficient route is developed to prepare (PDA–PEI)/titania hybrid microcapsules by in situ generation of an inorganic layer on an adhesive layer with mineralization-inducing capability under mild conditions.

Biological Evaluation and Characterisation of Novel Hydrogel Matrices as Scaffolds for Bone Tissue Engineering

Novel photopolymerised composite hydrogels based on PEGDMA, maleic chitosan and maleic PVA were investigated for their suitability in bone tissue engineering applications. Initial swelling and compression studies revealed that the hydrogels permitted the retention of aqueous solution while still maintaining structural integrity. Promising cytotoxicity data was obtained during direct and indirect contact exposure of composite hydrogels to pre-osteoblast (MC3T3-E1) cells. Hybrid hydrogels displayed minimal cytotoxic properties and allow tailoring of mechanical properties by variation of the loading of the maleic component in the composite. Scanning electron microscopy and live-dead staining of composite hydrogels also revealed that maleic chitosan based gels supported the adhesion of MC3T3-E1 cells and may have potential as bone tissue engineering scaffolds.

Mineralization and drug release of hydroxyapatite/poly(l-lactic acid) nanocomposite scaffolds prepared by Pickering emulsion templating

Biodegradable and bioactive nanocomposite (NC) biomaterials with controlled microstructures and able to deliver special drugs have gained increasing attention in bone tissue engineering. In this study, the hydroxyapatite (HAp)/poly(l-lactic acid) (PLLA) NC scaffolds were facilely prepared using solvent evaporation from templating Pickering emulsions stabilized with PLLA-modified HAp (g-HAp) nanoparticles. Then, in vitro mineralization experiments were performed in a simulated body fluid (SBF) to evaluate the bioactivity of the NC scaffolds. Moreover, in vitro drug release of the NC scaffolds using anti-inflammatory drug (ibuprofen, IBU) as the model drug was also investigated. The results showed that the NC scaffolds possessed interconnected pore structures, which could be modulated by varying the g-HAp nanoparticle concentration. The NC scaffolds exhibited excellent bioactivity, since they induced the formation of calcium-sufficient, carbonated apatite nanoparticles on the scaffolds after mineralization in SBF for 3 days. The IBU loaded in the NC scaffolds showed a sustained release profile, and the release kinetic followed the Higuchi model with diffusion process. Thus, solvent evaporation based on Pickering emulsion droplets is a simple and effective method to prepare biodegradable and bioactive porous NC scaffolds for bone repair and replacement applications.

Introduction to cell-hydrogel mechanosensing

The development of hydrogel-based biomaterials represents a promising approach to generating new strategies for tissue engineering and regenerative medicine. In order to develop more sophisticated cell-seeded hydrogel constructs, it is important to understand how cells mechanically interact with hydrogels. In this paper, we review the mechanisms by which cells remodel hydrogels, the influence that the hydrogel mechanical and structural properties have on cell behaviour and the role of mechanical stimulation in cell-seeded hydrogels. Cell-mediated remodelling of hydrogels is directed by several cellular processes, including adhesion, migration, contraction, degradation and extracellular matrix deposition. Variations in hydrogel stiffness, density, composition, orientation and viscoelastic characteristics all affect cell activity and phenotype. The application of mechanical force on cells encapsulated in hydrogels can also instigate changes in cell behaviour. By improving our understanding of cell-material mechano-interactions in hydrogels, this should enable a new generation of regenerative medical therapies to be developed.

The use of physiological solutions or media in calcium phosphate synthesis and processing

This review examined the literature to spot uses, if any, of physiological solutions/media for the in situ synthesis of calcium phosphates (CaP) under processing conditions (i.e. temperature, pH, concentration of inorganic ions present in media) mimicking those prevalent in the human hard tissue environments. There happens to be a variety of aqueous solutions or media developed for different purposes; sometimes they have been named as physiological saline, isotonic solution, cell culture solution, metastable CaP solution, supersaturated calcification solution, simulated body fluid or even dialysate solution (for dialysis patients). Most of the time such solutions were not used as the aqueous medium to perform the biomimetic synthesis of calcium phosphates, and their use was usually limited to the in vitro testing of synthetic biomaterials. This review illustrates that only a limited number of research studies used physiological solutions or media such as Earle's balanced salt solution, Bachra et al. solutions or Tris-buffered simulated body fluid solution containing 27mM HCO3(-) for synthesizing CaP, and these studies have consistently reported the formation of X-ray-amorphous CaP nanopowders instead of Ap-CaP or stoichiometric hydroxyapatite (HA, Ca10(PO4)6(OH)2) at 37°C and pH 7.4. By relying on the published articles, this review highlights the significance of the use of aqueous solutions containing 0.8-1.5 mMMg(2+), 22-27mM HCO3(-), 142-145mM Na(+), 5-5.8mM K(+), 103-133mM Cl(-), 1.8-3.75mM Ca(2+), and 0.8-1.67mM HPO4(2-), which essentially mimic the composition and the overall ionic strength of the human extracellular fluid (ECF), in forming the nanospheres of X-ray-amorphous CaP.

Borophosphates and silicophosphates as plausible contributors to the emergence of life

Scientific explanations for the origin of life are incomplete and may differ on some issues. Here, we argue that some prebiological steps have occurred in environments with borophosphates and/or silicophosphates in the form of hydrogels, on the basis of their chemical groups and structural properties. These could have decreased the diffusion rate of some prebiotic molecules, stabilized molecules with vicinal cis-diol groups, reduced the hydrolytic activity of water and inserted catalytic metal ions into their networks. Additionally, these hydrogels could have acted as reaction media, supplied a phosphate source for phosphorylations and produced crystals that may have permitted enantiomeric enrichment of prebiotic molecules, thus providing conditions for the emergence of protocells.

Probe spectrum measurements of Eu3+ions as a relevant tool for monitoring in vitro hydroxyapatite formation in a new borate biomaterial

CaB₂O₄powders and ceramics were prepared by the conventional solid-state reaction.

Resorbable, amino acid-based poly(ester urea)s crosslinked with osteogenic growth peptide with enhanced mechanical properties and bioactivity

Materials currently used for the treatment of bone defects include ceramics, polymeric scaffolds and composites, which are often impregnated with recombinant growth factors and other bioactive substances. While these materials have seen instances of success, each has inherent shortcomings including prohibitive expense, poor protein stability, poorly defined growth factor release and less than desirable mechanical properties. We have developed a novel class of amino acid-based poly(ester urea)s (PEU) materials which are biodegradable in vivo and possess mechanical properties superior to conventionally used polyesters (<3.5 GPa) available currently to clinicians and medical providers. We report the use of a short peptide derived from osteogenic growth peptide (OGP) as a covalent crosslinker for the PEU materials. In addition to imparting specific bioactive signaling, our crosslinking studies show that the mechanical properties increase proportionally when 0.5% and 1.0% concentrations of the OGP crosslinker are added. Our results in vitro and in an in vivo subcutaneous rat model show the OGP-based crosslinkers, which are small fragments of growth factors that are normally soluble, exhibit enhanced proliferative activity, accelerated degradation properties and concentration dependent bioactivity when immobilized.

Sulfobetaine as a zwitterionic mediator for 3D hydroxyapatite mineralization

Both positively and negatively charged residues play pivotal roles in recruiting precursor ions or ion clusters, and lowering interfacial energy in natural biomineralization process. Synergistic utilization of opposite charges, however, has rarely been implemented in the design of cytocompatible synthetic scaffolds promoting hydroxyapatite (HA)-mineralization and osteointegration. We report the use of cytocompatible zwitterionic sulfobetaine ligands to enable 3-dimensional in vitro mineralization of HA across covalently crosslinked hydrogels. The overall charge-neutral zwitterionic hydrogel effectively recruited oppositely charged precursor ions while overcame excessive swelling exhibited by anionic and cationic hydrogels under physiological conditions, resulting in denser and structurally well-integrated mineralized composites. Further controls over the size, content, and spatial distribution of the mineral domains within the zwitterionic hydrogel are accomplished by facile adjustments of hydrogel crosslinking densities and the supersaturation rate governing heterogeneous mineral nucleation and growth. These findings should inspire many creative uses of zwitterionic polymers and polymer coatings for skeletal tissue repair and regeneration.

Crystallization of bioinspired citrate-functionalized nanoapatite with tailored carbonate content

Novel citrate-functionalized carbonate-apatite nanoparticles with mean lengths ranging from 20 to 100 nm were synthesized by a thermal-decomplexing batch method. Needle-like and plate-shaped morphologies were obtained in the absence and presence of sodium carbonate in the precipitation medium, respectively. The precipitation time and the presence of sodium carbonate strongly affect the chemical composition as well as the dimensions and the crystallinity of nanoparticles. At a short precipitation time, poorly crystalline apatites of 100 nm mean length with a low degree of carbonation (1.5% w/w, mainly in B-position) and a high citrate content (5.9% w/w) were precipitated. This citrate content is close to that recently measured in bone apatite. When increasing the precipitation time up to 96 h the mean length and the citrate content progressively decrease and at the same time the nanoparticles become more crystalline. They are composed of a well-ordered carbonate-substituted apatitic core embedded in a non-apatitic hydrated layer containing citrate ions. This layer progressively transforms into a more stable apatite domain upon maturation in aqueous media. The nanoparticles displayed excellent compatibility properties in cell biological systems, since they were not cytotoxic to a mouse carcinoma cell line when added to a final concentration of 100 μgml(-1). This work provides new insights into the role of citrate on the crystallization of nanoapatites. Moreover, the synthesized nanoparticles are promising materials for use as nanocarriers for local targeted drug delivery systems as well as building blocks for the preparation of nanostructured scaffolds for cells in bone tissue engineering.