Fine structural tuning of diphenylaniline-based dyes for designing semiconductors relevant to dye-sensitized solar cells

Motivated by recent study on synthesized N, N-diphenylaniline (DPA)-based dyes [DOI: https://doi.org/10.1016/j.solener.2022.01.062 ] for use in dye-sensitized solar cells (DSSCs), we theoretically design several dyes and explore their potential for enhancing the efficiency of DSSCs. Our designed dyes are based on the molecular structure of synthesized DPA-azo-A and DPA-azo-N dyes with a donor-π-bridge-acceptor (D-π-A) framework. In this research, we aim to develop the power conversion efficiency (PCE) of DSSCs by fine-tuning the molecular structure of the synthesized dyes. To this end, we focus on designing dyes by replacing the units of DPA-azo-A and DPA-azo-N with a variety of donor, π-bridge, and acceptor. Hence the density functional theory (DFT) and time-dependent density functional theory (TD-DFT) calculations are done to explore their structure, electronic, optical, charge transport, and photovoltaic properties. Among all newly designed and reference dyes, the D3-azo-N and DPA-π3-N dyes which are designed by substituting the donor (DPA) and π-bridge (azo) units of DPA-azo-N with D3 and π3, respectively exhibit the highest PCE of 45.46% (for D3-azo-N) and 43.20% (for DPA-π3-N) and can be favorable dyes for improving the efficiency of DSSCs. Therefore, the dyes that are designed by substituting the donor and π-bridge units of synthesized dyes have more impact on improving the efficiency of DSSCs than those that involve replacing the acceptor units. Consequently, our theoretical findings will provide valuable insights for the experimentalists to employ these novel effective dyes and boost the performance of DSSCs.

Efficient Synthesis of a 2-Decyl-tetradecyl Substituted 7-Bromophenothiazine-3-carbaldehyde Building Block for Functional Dyes

(1) Polyfunctional molecules are versatile building blocks for efficient syntheses of novel phenothiazine-based materials with promising electronic properties. A prerequisite is a facile, high yielding access to these building blocks that bear solubilizing moieties and functional groups for orthogonal transformation. (2) Here, an efficient, improved two-step protocol for accessing a solubilizing 2-decyl-tetradecyl functionalized phenothiazine, i.e., an N-alkylated 7-bromophenothiazine-3-carbaldehyde, by Vilsmeier–Haack formylation and NBS (N-bromo succinimide) bromination is reported. (3) The sequence proceeds with higher yields and in shorter reaction times than the standard access employing bromination with elementary bromine. In addition, the work-up procedure essentially uses absorptive filtration on a plug of silica with the eluent.

The role of the donor group and electron-accepting substitutions inserted in π-linkers in tuning the optoelectronic properties of D-π-A dye-sensitized solar cells: a DFT/TDDFT study

The design of low-cost and high-efficiency sensitizers is one of the most important factors in the expansion of dye-sensitized solar cells (DSSCs). To obtain effective sensitizer dyes for applications in dye-sensitized solar cells, a series of metal-free organic dyes with the D–π–A–A arrangement and with different donor and acceptor groups have been designed by using computational methodologies based on density functional theory (DFT) and time-dependent density functional theory (TD-DFT). We have designed JK-POZ(1–3) and JK-PTZ(1–3) D–π–A–A organic dyes by modifying the donor and π-linker units of the JK-201 reference dye. Computational calculations of the structural, photochemical properties and electrochemical properties, as well as the key parameters related to the short-circuit current density and open-circuit voltage, including light-harvesting efficiency (LHE), singlet excited state lifetime (τ), reorganization energies (λ_total), electronic injection-free energy (ΔG^inject) and regeneration driving forces (ΔG^reg) of dyes were calculated and analyzed. Moreover, charge transfer parameters, such as the amount of charge transfer (q^CT), the charge transfer distance (D^CT), and dipole moment changes (μ^CT), were investigated. The results show that ΔG^reg, λ_max, λ_total and τ of JK-POZ-3 and JK-PTZ-3 dyes are superior to those of JK-201, indicating that novel JK-POZ-3 and JK-PTZ-3 dyes could be promising candidates for improving the efficiency of the DSSCs devices.

A series of metal-free organic dyes with the D–π–A–A arrangement and with different donor and acceptor groups have been designed theoretically.

Through structural isomerism: positional effect of alkyne functionality on molecular optical properties

Literature studies on the effects of alkyne functionality in manipulating the optical properties of donor-π-acceptor-type molecular scaffolds have been scarce compared to those on the alkene functional group. Here, two structurally isomeric donor-acceptor (D-A) dyes were synthesized to study the positional effect of alkyne functionality (triple bond) on their optical, electrochemical and charge generation properties in order to design efficient dyes for possible application in dye sensitized solar cells (DSSCs). These dyes, named CAPC and PACC, contain carbazole and cyanoacrylic acid as the donor and acceptor units, respectively, and the π-conjugation length within the molecules was controlled by the introduction of an alkyne group. The D-π-A design was followed in designing CAPC with the alkyne serving as the π-spacer, while in PACC, alkyne was placed on the donor, which was directly in conjugation with the acceptor. This rendered equal conjugation lengths within the designed dyes. With the help of photophysical characterizations, it was concluded that CAPC featured better characteristics for a DSSC dye than PACC. Our conclusions were further supported by the results of transient absorption spectroscopy, electrochemical analysis, fluorescence lifetime studies and density functional theory.

Non-metallic organic dyes as photosensitizers for dye-sensitized solar cells: a review

The advent of novel technologies has led to the need for environmental and economic integration. Energy consumption plays a vital role in human existence, and thereby sustainable development is the need of the hour. When the methods of energy production are discussed, renewable resources are opted to meet the needs of the future with the key resources being solar and wind energy. Solar energy is widely adapted and harnessed due to its abundance and various benefits. Silicon-based solar cells, though produced higher efficiencies, have many cons due to their toxicity and cost. Dye-sensitized solar cells have been grounded as a better alternative due to their ability to function under low light, wider angles, and low internal temperature. In this review paper, various organic metal-free dyes, and their efficiencies along with their cell parameters are discussed. These metal-free dyes are adopted over conventional ruthenium dyes due to their non-toxicity, availability, and cost.

Transition-Metal-Free Synthesis of N-Arylphenothiazines through an N- and S-Arylation Sequence

An efficient synthetic method of N-arylphenothiazines from o-sulfanylanilines under transition-metal-free conditions is disclosed. An N- and S-arylation sequence of o-sulfanylanilines enabled us to synthesize a wide variety of N-arylphenothiazines. In particular, one-pot synthesis of N-arylphenothiazines was accomplished from easily available modules through preparation of o-sulfanylanilines by thioamination of aryne intermediates and following N- and S-arylation sequence.

Nucleophilic Aromatic Substitution of Polyfluoroarene to Access Highly Functionalized 10-Phenylphenothiazine Derivatives

Nucleophilic aromatic substitution (S_NAr) reactions can provide metal-free access to synthesize monosubstituted aromatic compounds. We developed efficient S_NAr conditions for p-selective substitution of polyfluoroarenes with phenothiazine in the presence of a mild base to afford the corresponding 10-phenylphenothiazine (PTH) derivatives. The resulting polyfluoroarene-bearing PTH derivatives were subjected to a second S_NAr reaction to generate highly functionalized PTH derivatives with potential applicability as photocatalysts for the reduction of carbon–halogen bonds.

Ferrocene Derivatives Functionalized with Donor/Acceptor (Hetero)Aromatic Substituents: Tuning of Redox Properties

A series of functionalized ferrocene derivatives carrying electron-donor and electron-withdrawing (hetero)aromatic substituents has been designed as potential alternative electrolyte redox couples for dye-sensitized solar cells (DSSC). The compounds have been synthesized and fully characterized in their optical and electrochemical properties. A general synthetic approach that implies the use of a microwave assisted Suzuki coupling has been developed to access a significative number of compounds. The presence of different electron-rich and electron-poor substituents provided fine tuning of optical properties and energy levels. HOMO and LUMO energy values showed that the substitution of one or two cyclopentadienyl rings of ferrocene can be successfully exploited to increase the maximum attainable voltage from a standard DSSC device using TiO2 as a semiconductor, opening the way to highly efficient, non-toxic, and cheap redox shuttles to be employed in solar energy technologies.

Synthesis, photophysical properties, and density functional theory studies of phenothiazine festooned vinylcyclohexenyl-malononitrile

A novel phenothiazine derivative conjugated with vinylcyclohexenyl-malononitrile (PTZ-CDN) was synthesized through the Knoevenagel reaction of 10-octyl-10H-phenothiazine-3,7-dicarbaldehyde with 2-(3,5,5-trimethylcyclohex-2-en-1-ylidene)-malononitrile and fully characterized. The UV-vis absorption spectra of PTZ-CDN in different solvents showed a λ_max band at 497-531 nm with a high molar extinction coefficient attributed to intramolecular charge transfer (ICT) with the characteristics of a π-π* transition. Increasing the solvent polarity resulted in a bathochromic shift of λ_max . The PTZ-CDN fluorescence emission spectra were more sensitive to increasing the solvent polarity than the absorption spectra; they displayed a blue shift of λ_em by 85 nm. To understand the behaviour of the PTZ-CDN derivative, Stokes' shift ( Δ ν ¯ ) with respect to the solvent polarity, Lippert-Mataga and linear solvation-energy relationship (LSER) models were applied in which the LSER showed better regression than the Lippert-Mataga plots (r² = 0.9627). Finally, the TD-density functional theory (DFT) electronic transition spectra in dioxane and dimethyl formamide (DMF) were calculated. The DFT data showed that λ_max resulted from the support of the highest occupied molecular orbital to the lowest unoccupied molecular orbital transition with 74% and 99% in dioxane and DMF, respectively.

Single-Molecular White-Light Emitters and Their Potential WOLED Applications

White organic light-emitting diodes (WOLEDs) are superior to traditional incandescent light bulbs and compact fluorescent lamps in terms of their merits in ensuring pure white-light emission, low-energy consumption, large-area thin-film fabrication, etc. Unfortunately, WOLEDs based on multilayered or multicomponent (red, green, and blue (RGB)) emissive layers can suffer from some remarkable disadvantages, such as intricate device fabrication and voltage-dependent emission color, etc. Single molecules, which can emit white light, can be used to replace multiple emitters, leading to a simplified fabrication process, stable and reproducible WOLEDs. Recently, the performance of WOLEDs by using single molecules is catching up with that of the state-of-the-art devices fabricated by multicomponent emitters. Therefore, an increasing attention has been paid on single white-light-emitting materials for efficient WOLEDs. In this review, different mechanisms of white-light emission from a single molecule and the performance of single-molecule-based WOLEDs are collected and expounded, hoping to light up the interesting subject on single-molecule white-light-emitting materials, which have great potential as white-light emitters for illumination and lighting applications in the world.

Hexyl dithiafulvalene (HDT)-substituted carbazole (CBZ) D–π–A based sensitizers for dye-sensitized solar cells

Two carbazole based dyes with donor hexyl dithiafulvalene at C6 position using D–π–A concept having either cyanoacrylic acid (HDT-C1) or rhodanine-3-acetic acid (HDT-C2) as acceptor group for the applied to DSSCs with an efficiency of 7.38%.

DFT/TD-DFT study of novel T shaped phenothiazine-based organic dyes for dye-sensitized solar cells applications

Five novel T shaped phenothiazine-based organic dyes DTTP1~5 with different spacers at N (10) position were designed. The geometries, electronic structures, absorption spectra, electron transfer and injection properties of these isolated dyes and dye/(TiO₂)₉ systems were investigated via density functional theory (DFT) and time dependent density functional theory (TD-DFT) calculation. The optimized geometries indicate that these T shaped dyes show non-planar conformations, which are helpful in suppressing the close intermolecular π-π aggregation in device and enhancing thermal stability. The calculated results indicate that type of π-conjugated spacers can affect the molecular absorption spectra. Introduction of thiophene-benzothiadizole-thiophene unit as π-conjugated spacer can most effectively shift the light absorption to near infrared region and enhance the light harvesting efficiency (LHE). Moreover, it is found that these dyes show a good performance of electron injection and dye regeneration owing to the proper electron injection driving force (ΔG_inject) and dye regeneration driving force (ΔG_reg). The theoretical results reveal that these dyes could be used as potential sensitizers for DSSCs, and DTTP4 would be the most plausible sensitizer for high-efficiency DSSCs due to the narrow HOMO-LUMO energy gap (Δ_H-L), broad absorption spectrum, high LHE value, and large dipole moment (μ_normal).

Structure and Photoelectrical Properties of Natural Photoactive Dyes for Solar Cells

A series of natural photoactive dyes, named as D1–D6 were successfully extracted from six kinds of plant leaves for solar cells. The photoelectrical properties of dyes were measured via UV-Vis absorption spectra, cyclic voltammetry as well as photovoltaic measurement. To theoretically reveal the experimental phenomena, the chlorophyll was selected as the reference dye, where the ground and excited state properties of chlorophyll were calculated via density functional theory (DFT) and time-dependent density functional theory (TD-DFT). The experimental results show that the absorption peaks of those dyes are mainly distributed in the visible light regions of 400–420 nm and 650–700 nm, which are consistent with the absorption spectrum of chlorophyll. The photoelectrical conversion efficiencies of the solar cells sensitized by the six kinds of natural dyes are in the order of D1 > D4 > D2 > D5 > D6 > D3. The dye D1 performance exhibits the highest photoelectrical conversion efficiency of 1.08% among the investigated six natural dyes, with an open circuit voltage of 0.58 V, a short-circuit current density of 2.64 mA cm−2 and a fill factor of 0.70.

Interaction of pyridine π-bridge-based poly(methacrylate) dyes for the fabrication of dye-sensitized solar cells with the influence of different strength phenothiazine, fluorene and anthracene sensitizers as donor units with new anchoring mode

A simple and low-cost approach for the synthesis of three novel propeller-shaped (D₂)–π–A type organic polymer dyes has been developed; a new acceptor and π-bridge (PYN) were used to tune the photoelectric properties: DFT studies.

A new class of triphenylamine-based novel sensitizers for DSSCs: a comparative study of three different anchoring groups

Triphenylamine-based dyes with chloro groups suitably placed on their π-linkers affect DSSC efficiency.

Applications of Fluorogens with Rotor Structures in Solar Cells

Solar cells are devices that convert light energy into electricity. To drive greater adoption of solar cell technologies, higher cell efficiencies and reductions in manufacturing cost are necessary. Fluorogens containing rotor structures may be helpful in addressing some of these challenges due to their unique twisted structures and photophysics. In this review, we discuss the applications of rotor-containing molecules as dyes for luminescent down-shifting layers and luminescent solar concentrators, where their aggregation-induced emission properties and large Stokes shifts are highly desirable. We also discuss the applications of molecules containing rotors in third-generation solar cell technologies, namely dye-sensitized solar cells and organic photovoltaics, where the twisted 3-dimensional rotor structures are used primarily for aggregation control. Finally, we discuss perspectives on the future role of molecules containing rotor structures in solar cell technologies.

A circulating electrolyte for a high performance carbon-based dye-sensitized solar cell

Novel Pt-free dye-sensitized solar cells with a circulating electrolyte demonstrate much better photovoltaic performance than those with a stationary one.

Bi-anchoring Organic Dyes that Contain Benzimidazole Branches for Dye-Sensitized Solar Cells: Effects of π Spacer and Peripheral Donor Groups

Benzimidazole-branched bi-anchoring organic dyes that contained triphenylamine/phenothiazine donors, 2-cyanoacrylic acid acceptors, and various π linkers were synthesized and examined as sensitizers for dye-sensitized solar cells. The structure-activity relationships in these dyes were systematically investigated by using absorption spectroscopy, cyclic voltammetry, and density functional theory calculations. The wavelength of the absorption peak was more-heavily influenced by the nature of the π linker than by the nature of the donor. For a given donor, the absorption maximum (λmax ) was red-shifted on changing the π linker from phenyl to 2,2'-bithiophene, whilst the dyes that contained triphenylamine units displayed higher molar extinction coefficients (ϵ) than their analogous phenothiazine-based triphenylamine dyes, which led to good light-harvesting properties in the triphenylamine-based dyes. Electrochemical data for the dyes indicated that the triphenylamine-based dyes possessed relatively low-lying HOMOs, which could be beneficial for suppressing back electron transfer from the conduction band of TiO2 to the oxidized dyes, owing to facile regeneration of the oxidized dye by the electrolyte. The best performance in the DSSCs was observed for a dye that possessed a triphenylamine donor and 2,2'-bithiophene π linkers. Electron impedance spectroscopy (EIS) studies revealed that the use of triphenylamine as the donor and phenyl or 2,2'-bithiophene as the π linkers was beneficial for disrupting the dark current and charge-recombination kinetics, which led to a long electron lifetime of the injected electrons in the conduction band of TiO2 .

Artificial evolution of coumarin dyes for dye sensitized solar cells

The design and discovery of novel molecular structures with optimal properties has been an ongoing effort for materials scientists. This field has in general been dominated by experiment driven trial-and-error approaches that are often expensive and time-consuming. Here, we investigate if a de novo computational design methodology can be applied to the design of coumarin-based dye sensitizers with improved properties for use in Grätzel solar cells. To address the issue of synthetic accessibility of the designed compounds, a fragment-based assembly is employed, wherein the combination of chemical motifs (derived from the existing databases of structures) is carried out with respect to user-adaptable set of rules. Rather than using computationally intensive density functional theory (DFT)/ab initio methods to screen candidate dyes, we employ quantitative structure-property relationship (QSPR) models (calibrated from empirical data) for rapid estimation of the property of interest, which in this case is the product of short circuit current (Jsc) and open circuit voltage (Voc). Since QSPR models have limited validity, pre-determined applicability domain criteria are used to prevent unacceptable extrapolation. DFT analysis of the top-ranked structures provides supporting evidence of their potential for dye sensitized solar cell applications.

Synthesis of Novel Derivatives of Carbazole-Thiophene, Their Electronic Properties, and Computational Studies

A series of carbazole-thiophene dimers,P1–P9, were synthesized using Suzuki-Miyaura and Ullmann coupling reactions. InP1–P9, carbazole-thiophenes were linked at the N-9 position for different core groups via biphenyl, dimethylbiphenyl, and phenyl. Electronic properties were evaluated by UV-Vis, cyclic voltammogram, and theoretical calculations. Particularly, the effects of conjugation connectivity on photophysical and electrochemical properties, as well as the correlation between carbazole-thiophene and the core, were studied. Carbazole connecting with thiophenes at the 3,6-positions and the phenyl group as a core group leads to increased stabilization of HOMO and LUMO energy levels where the bandgap (ΔE) is significantly reduced.

New D–D–π–A type organic dyes having carbazol-N-yl phenothiazine moiety as a donor (D–D) unit for efficient dye-sensitized solar cells: experimental and theoretical studies

DSSCs using novel organic dyes (CPhTnPA, n = 0–2) with carbazol-N-yl phenothiazine moiety as a donor (D–D) unit as the sensitizers exhibited efficiency as high as 7.78% which reached 95% with respect to that of the reference N719-based device (8.20%).

Aggregation-induced emission enhancement and cell imaging of a novel (carbazol-N-yl)triphenylamine–BODIPY

The AIEE fluorogen BCPA–BODIPY emits strong red fluorescence and shows a good uptake by MCF-7 cells.

Influence of the Terminal Electron Donor in D-D-π-A Organic Dye-Sensitized Solar Cells: Dithieno[3,2-b:2',3'-d]pyrrole versus Bis(amine)

With respect to the electron-withdrawing acceptors of D-A-π-A organic dyes, reports on the second electron-donating donors for D-D-π-A organic dyes are very limited. Both of the dyes have attracted significant attention in the field of dye-sensitized solar cells (DSCs). In this work, four new D-D-π-A organic dyes with dithieno[3,2-b:2',3'-d]pyrrole (DTP) or bis(amine) donor have been designed and synthesized for a investigation of the influence of the terminal electron donor in D-D-π-A organic dye-sensitized solar cells. It is found that DTP is a promising building block as the terminal electron donor when introduced in the dithiophenepyrrole direction, but not just a good bridge, which exhibits several characteristics: (i) efficiently increasing the maximum molar absorption coefficient and extending the absorption bands; (ii) showing stronger charge transfer interaction as compared with the pyrrole direction; (iii) beneficial to photocurrent generation of DSCs employing cobalt electrolytes. DSCs based on M45 with the Co-phen electrolyte exhibit good light-to-electric energy conversion efficiencies as high as 9.02%, with a short circuit current density (JSC) of 15.3 mA cm(-2), open circuit voltage (VOC) of 867 mV and fill factor (FF) of 0.68 under AM 1.5 illumination (100 mW cm(-2)). The results demonstrate that N,S-heterocycles such as DTP unit could be promising candidates for application in highly efficient DSCs employing cobalt electrolyte.

Synthesis, photophysical and electrochemical properties of two novel carbazole-based dye molecules

Two carbazole-based dye molecules: 3-(6-benzothiazol-2-yl-9H-hexylcarbazole-3-yl)-2-cyano-acylic acid (D3) and 3-[5-(6-benzothiazol-2-yl-9H-hexylcarbazole-3-yl)-thiophen-2-yl]-2-cyan-acylic acid (D4) were synthesized by an approach from carbazole derivate using Vilsmeier-Haack, Suzuki cross-coupling and Knoevenagel reactions. Their physical and electrochemical properties were investigated. D3 and D4 exhibit different optical properties, such as UV absorption, photoluminescence, fluorescence quantum yield and fluorescence lifetime in different solvents. Compared with D3 without a thiophene unit, the maximum absorption wavelength of D4 red-shift obviously and its fluorescence intensity is also enhanced. A shift of the EHOMO and ELUMO is observed for D3 (EHOMO=2.06 V, ELUMO=-1.39 V vs. NHE) and D4 (EHOMO=1.73 V, ELUMO=-1.33 V vs. NHE). D3 and D4 can be used as dyes for dye-sensitized solar cells (DSSCs) with TiO2 nanomaterial because their EHOMO are lower than the conduction band edge of TiO2 [-0.5 V (vs. NHE)] and their ELUMO are higher than the I(3-)/I(-) redox potential [0.42 V (vs. NHE)].

Strategies for optimizing the performance of carbazole thiophene appended unsymmetrical squaraine dyes for dye-sensitized solar cells

Unsymmetrical squaraine dyes (CTSQ-1 and CTSQ-2) with carbazole thiophene donor units were synthesized, characterized and used as sensitizers in dye-sensitized solar cells (DSSCs).

The effect of porphyrins suspended with different electronegative moieties on the photovoltaic performance of monolithic porphyrin-sensitized solar cells with carbon counter electrodes

Compared with WH-C3 and WH-C4, the WH-C5-sensitized device shows a significantly enhanced V_oc, J_sc and power conversion efficiency (η).

Visible light induced hydrogen production over thiophenothiazine-based dye sensitized TiO2 photocatalyst in neutral water

Novel thiophenothiazine sensitized TiO₂ photocatalysts show high photocatalytic hydrogen production from water splitting under visible light illumination.

Phenothiazine based sensor for naked-eye detection and bioimaging of Hg(ii) and F− ions

The design and development of new phenothiazine-based fluorescent probes, which displays selective fluorescence response to Hg²⁺ and F⁻ ions in a reversible manner. The probe is the first example that facilitates the detection of Hg²⁺ at nanomolar concentration.