Enhancing decomposition of rhodamine (RhB) and methylene blue (MB) using CdS decorated with Ag or Ru driven by visible radiation

The development of photocatalysts has an influential role in solving the environmental pollution crisis. Herein, the two different noble metals of silver (Ag)/ruthenium (Ru) were separately decorated on cadmium sulfide (CdS) photocatalysts by novel chemical methods. Characterization tests confirmed the formation of Ag/Ru-decorated CdS with spherical morphologies. According to the DRS and PL experiments, Ru-decorated CdS accounted for the highest light absorbance and the most accelerated transfer and detachment of photoelectrons/holes, followed by Ag-decorated CdS compared to pure CdS, which brought proper optical properties of Ag/Ru-decorated CdS. The photodecomposition of methylene blue (MB)/rhodamine B (RhB) as dyes and phenol as a colorless pollutant in the presence of Ag-decorated CdS (96%, 95%, and 69%) and Ru-decorated CdS (100%, 100%, and 80%) exposed to visible light radiation climbed compared to pure CdS (80%, 67%, and 61%) respectively. The influence of various parameters on the MB/RhB photocatalytic activity was investigated. The quenching experiment determined the functions of active species. Finally, experimental results proved that the MB/RhB photodecomposition by Ag/Ru-decorated CdS followed the pseudo-first-order kinetic model.

Conductometric ppb-Level CO Sensors Based on In2O3 Nanofibers Co-Modified with Au and Pd Species

Carbon monoxide (CO) is one of the most toxic gases to human life. Therefore, the effective monitoring of it down to ppb level is of great significance. Herein, a series of In₂O₃ nanofibers modified with Au or Pd species or simultaneous Au and Pd species have been prepared by electrospinning combined with a calcination process. The as-obtained samples are applied for the detection of CO. Gas-sensing investigations indicate that 2 at% Au and 2 at% Pd-co-modified In₂O₃ nanofibers exhibit the highest response (21.7) to 100 ppm CO at 180 °C, and the response value is ~8.5 times higher than that of pure In₂O₃ nanofibers. More importantly, the detection limit to CO is about 200 ppb with a response value of 1.23, and is obviously lower than that (6 ppm) of pure In₂O₃ nanofibers. In addition, the sensor also shows good stability within 19 days. These demonstrate that co-modifying In₂O₃ nanofibers with suitable amounts of Pd and Au species might be a meaningful strategy for the development of high-performance carbon monoxide gas sensors.

High Sensing Performance Toward Acetone Vapor Using TiO2 Flower-Like Nanomaterials

For real-application gas sensors, high performances (response, selectivity, response/recovery time and stability) are demanded. An effective strategy is applying nanomaterials in gas sensors. In this study, the anatase TiO₂ flower-like nanomaterials (FLNMs) are prepared through a one-step hydrothermal method which exhibit high-performance toward acetone vapor. TiO₂ FLNMs sensors property are characterized at optimal working temperature of 330 °C with selectivity (acetone), response (S = 33.72 toward 250 ppm acetone), linear dependence (R² = 0.9913), response/recovery time (46/24 s toward 250 ppm acetone) and long-term stability (30 days). These demonstrate that TiO₂ FLNMs get a high performance for acetone sensor. Moreover, the limit of detection of acetone is 0.65 ppm which is lower than that of exhaled air for diabetes (0.8 ppm), indicating that TiO₂ FLNMs gas sensor gets potential application in medical diagnosis.

Nanofibers of Polyaniline and Cu(II)-l-Aspartic Acid for a Room-Temperature Carbon Monoxide Gas Sensor

In the present study, the carbon monoxide (CO) sensing property of Cu(II)-l-aspartic acid nanofibers/polyaniline (PANI) nanofibers composite was investigated at room temperature. The nanofiber composite was formed through the ultrasound mixing of emeraldine salt PANI nanofibers and Cu(II)-l-aspartic acid nanofibers, which were synthesized by using a polymerization process and simple self-assembly method, respectively. The nanofibers composite demonstrated a branched structure in which the Cu(II)-l-aspartic acid nanofiber framework is similar to the trunk of a tree and the polyaniline nanofibers is like its branches. It seems that this special structure and one-dimension/one-dimension interface are suitable for gas adsorption and sensing. The performance of the prepared sensor toward CO gas was investigated at room temperature in a wide concentration range (200-8000 ppm). The experimental results indicate that the incorporation of amino acid-based copper metal-biomolecule framework nanofibers to PANI nanofibers enhances the response value (12.41% to 4000 ppm), yielding good selectivity and acceptable response and recovery characteristics (220 s/240 s) at room temperature. The detection limit of Cu(II)-l-aspartic acid nanofibers/PANI nanofibers sensor for carbon monoxide is obtained at 120 ppm.

Boosting Room Temperature Sensing Performances by Atomically Dispersed Pd Stabilized via Surface Coordination

The urgent requirement of monitoring air pollution worldwide evokes intensive research interest in developing chemiresistive gas sensing techniques. To overcome the limits in sensitivity and selectivity of room temperature (RT) chemiresistive sensing materials, a new strategy using single-atom catalysts (SACs) via surface coordination is proposed. As a proof-of-concept, single Pd atoms on TiO₂ (Pd₁-TiO₂) possess high efficiency in generating adsorbed O₂^- as well as high activity and selectivity in catalyzing CO oxidation at RT. As a result, Pd₁-TiO₂ shows record high sensitivity among the reported RT sensing materials, which is even comparable to those of the best materials working at high temperature. It also provides an approximately 1 order of magnitude lower limit of detection than the best CO sensing materials. Moreover, Pd₁-TiO₂ presents high selectivity toward 12 kinds of interference gases. This work not only paves a way to design high-performance RT gas sensing materials but also extends the application of SACs.

Schottky-Contacted Nanowire Sensors

The progress of the Internet-of-Things in the past few years has necessitated the support of high-performance sensors. Schottky-contacted nanowire sensors have attracted considerable attention owing to their high sensitivity and fast response time. Their progress is reviewed here, based on several kinds of important nanowires, for applications such as bio/chemical sensors, gas sensors, photodetectors, and strain sensors. Although Schottky-contacted nanowire sensors deliver excellent performance in these fields, they can be further improved by various methods, including defect engineering, surface modification, the piezotronic effect, and the piezophototronic effect, all of which are discussed here. With regard to practical applications, further efforts are required to address challenges such as the stability, selectivity, ultrafast response, multifunctionality, flexibility, distributed energy supply, and sustainability of Schottky-contacted nanowire sensors. Finally, future perspectives and solutions are discussed.

GaN/Ga2O3 Core/Shell Nanowires Growth: Towards High Response Gas Sensors

The development of sensors working in a large range of temperature is of crucial importance in areas such as monitoring of industrial processes or personal tracking using smart objects. Devices integrating GaN/Ga2O3 core/shell nanowires (NWs) are a promising solution for monitoring carbon monoxide (CO). Because the performances of sensors primarily depend on the material properties composing the active layer of the device, it is essential to control them and achieve material synthesis in the first time. In this work, we investigate the synthesis of GaN/Ga2O3 core-shell NWs with a special focus on the formation of the shell. The GaN NWs grown by plasma-assisted molecular beam epitaxy, are post-treated following thermal oxidation to form a Ga2O3-shell surrounding the GaN-core. We establish that the shell thickness can be modulated from 1 to 14 nm by changing the oxidation conditions and follows classical oxidation process: A first rapid oxide-shell growth, followed by a reduced but continuous oxide growth. We also discuss the impact of the atmosphere on the oxidation growth rate. By combining XRD-STEM and EDX analyses, we demonstrate that the oxide-shell is crystalline, presents the β-Ga2O3 phase, and is synthesized in an epitaxial relationship with the GaN-core.

Discovery of Layered Indium Hydroxide via a Hydroperoxyl Anion Coordinated Precursor at Room Temperature

All reported layered metal hydroxides have brucite-like metal-hydroxyl host layers, and the discovery of other types of layered metal hydroxides could significantly extend the layered metal hydroxide families, which is meaningful in both theory and applications. Here, through hydroperoxyl anion coordinated In³⁺ cations as a precursor, a new layered indium hydroxide was synthesized, where only a three-dimensional cubic phase had existed before. The layer of the product exhibits an unusual structure where In(OH)₆ octahedra share edges and vertexes with each other to form layers, which is completely different from the common edge-sharing brucite-like metal-hydroxyl layers. By investigating the formation mechanism, the new layered structure is found to be formed by changing the traditional crystallization path through the hydroperoxyl anion coordinated intermediates. Many other new phases could also be discovered by following the same intrinsic principle.

An Ultrahigh Sensitivity Acetone Sensor Enhanced by Light Illumination

Au:SmFe0.9Zn0.1O₃ is synthesized by a sol-gel method and annealed at 750 °C. Through XRD, SEM and XPS analysis methods, the microstructure of the material has been observed. The average particle size is about 50 nm. The sensor shows a high sensitivity toward acetone vapor. As the relative humidity increases, the resistance and sensitivity of the sensor decline. To obtain a low optimum operating temperature, light illumination with different wavelengths has been introduced. The sensitivity toward acetone is improved at lower operating temperature when the sensor is irradiated by light. The smaller the wavelengths, the better the sensitivity of the sensor. Compared with other gases, the sensor shows excellent selectivity to acetone vapor, with better sensitivity, selectivity and stability when under light illumination.

High Sensing Properties of 3 wt % Pd-Doped SmFe1- xMg xO3 Nanocrystalline Powders to Acetone Vapor with Ultralow Concentrations under Light Illumination

Nanocrystalline powders of 3 wt % Pd-doped SmFe_{1- x}Mg _xO₃ ( x = 0, 0.1, 0.2, and 0.3) were prepared by a sol-gel method and annealed at 750 °C. Pd:SmFe_0.9Mg_0.1O₃ has a maximum response at 220 °C. When exposed to 0.5 ppm acetone vapor, the response of undoped SmFeO₃ is 2.26 and the response of Pd:SmFe_0.9Mg_0.1O₃ is 7.16. Under light illumination, Pd:SmFe_0.9Mg_0.1O₃ has a better sensing performance and lower optimal operating temperature. The sensor shows good selectivity and stability for acetone vapor. The high response and good selectivity of Pd:SmFe_0.9Mg_0.1O₃ to ultralow concentrations of acetone vapor indicate its potential for applications in many areas.

Controlled synthesis of Pt and Co3O4 dual-functionalized In2O3 nanoassemblies for room temperature detection of carbon monoxide

Innovative Pt and Co₃O₄ nanostructure co-decorated In₂O₃ nanobundles have been successfully developed and demonstrated as high-performance room-temperature CO gas sensors.

Realizing Synergy between In2O3 Nanocubes and Nitrogen-Doped Reduced Graphene Oxide: An Excellent Nanocomposite for the Selective and Sensitive Detection of CO at Ambient Temperatures

Hierarchical mesoporous In₂O₃ nanocubes and nitrogen-doped reduced graphene oxide-indium oxide nanocube (In_NrGO) composites were prepared for carbon monoxide (CO) sensing. The as-synthesized materials were systematically investigated by different characterization techniques such as field emission scanning electron microscopy, transmission electron microscopy, X-ray diffraction, thermogravimetic analysis, X-ray photoelectron spectroscopy, micro-Raman, Fourier transform infrared spectroscopy, and photoluminesce analysis. The obtained results are consistent with each other. The CO-sensing characteristics of the In₂O₃ nanocubes and In_NrGO composites were examined at different operating temperatures (35 °C < T_s < 300 °C) and CO concentrations (1-1000 ppm). Owing to their large surface-to-volume ratio and porosity, the In₂O₃ nanocubes exhibited a superior sensitivity with a detection limit of 1 ppm at 250 °C. Furthermore, to enhance the sensing characteristics and reduce the operating temperature, a composite of NrGO and In₂O₃ nanocubes was fabricated. The incorporation of NrGO drastically improved the sensing performance of the In₂O₃ nanocubes, showing an excellent sensitivity (S_R ∼ 3.6-5 ppm of CO at ∼35 °C) with appreciably fast response (Γ_RES ∼ 22 s) and recovery (Γ_REC ∼ 32 s) times. The sensing studies supported by the structural and morphological material characteristics lead to the plausible sensing mechanism proposed.

Colloidal synthesis of Cu-ZnO and Cu@CuNi-ZnO hybrid nanocrystals with controlled morphologies and multifunctional properties

Metal-semiconductor hybrid nanocrystals have received extensive attention owing to their multiple functionalities which can find wide technological applications. The utilization of low-cost non-noble metals to construct novel metal-semiconductor hybrid nanocrystals is important and meaningful for their large-scale applications. In this study, a facile solution approach is developed for the synthesis of Cu-ZnO hybrid nanocrystals with well-controlled morphologies, including nanomultipods, core-shell nanoparticles, nanopyramids and core-shell nanowires. In the synthetic strategy, Cu nanocrystals formed in situ serve as seeds for the heterogeneous nucleation and growth of ZnO, and it eventually forms various Cu-ZnO hetero-nanostructures under different reaction conditions. These hybrid nanocrystals possess well-defined and stable heterostructure junctions. The ultraviolet-visible-near infrared spectra reveal morphology-dependent surface plasmon resonance absorption of Cu and the band gap absorption of ZnO. Furthermore, we construct a novel Cu@CuNi-ZnO ternary hetero-nanostructure by incorporating the magnetic metal Ni into the pre-synthesized colloidal Cu nanocrystals. Such hybrid nanocrystals possess a magnetic Cu-Ni intermediate layer between the ZnO shell and the Cu core, and exhibit ferromagnetic/superparamagnetic properties which expand their functionalities. Finally, enhanced photocatalytic activities are observed in the as-prepared non-noble metal-ZnO hybrid nanocrystals. This study not only provides an economical way to prepare high-quality morphology-controlled Cu-ZnO hybrid nanocrystals for potential applications in the fields of photocatalysis and photovoltaic devices, but also opens up new opportunities in designing ternary non-noble metal-semiconductor hybrid nanocrystals with multifunctionalities.

Nanostructured Materials for Room-Temperature Gas Sensors

Sensor technology has an important effect on many aspects in our society, and has gained much progress, propelled by the development of nanoscience and nanotechnology. Current research efforts are directed toward developing high-performance gas sensors with low operating temperature at low fabrication costs. A gas sensor working at room temperature is very appealing as it provides very low power consumption and does not require a heater for high-temperature operation, and hence simplifies the fabrication of sensor devices and reduces the operating cost. Nanostructured materials are at the core of the development of any room-temperature sensing platform. The most important advances with regard to fundamental research, sensing mechanisms, and application of nanostructured materials for room-temperature conductometric sensor devices are reviewed here. Particular emphasis is given to the relation between the nanostructure and sensor properties in an attempt to address structure-property correlations. Finally, some future research perspectives and new challenges that the field of room-temperature sensors will have to address are also discussed.

Ultrasensitive sensing performances to sub-ppb level acetone for Pd-functionalized SmFeO3packed powder sensors

Pd-SmFeO₃is functionalized by mixing PdCl₂with nanocrystalline powders and subsequently followed by an annealing at 750 °C.

Hollow V₂O₅ Nanoassemblies for High-Performance Room-Temperature Hydrogen Sensors

Nanostructured oxides with characteristic morphologies are essential building blocks for high-performance gas-sensing devices. We describe the high-yield fabrication of a series of functionalized V2O5 nanoassemblies through a facile polyol approach with specific varieties of polyvinylpyrrolidone. The synthesized V2O5 nanoassemblies consisting of tiny one-dimensional nanoblocks with the absence of any extrinsic catalysts exhibit distinct hemispherical or spherical hollow morphologies and operate as room-temperature hydrogen sensors with remarkable sensitivities and responses.

Pd-loaded In2O3 nanowire-like network synthesized using carbon nanotube templates for enhancing NO2 sensing performance

Pd–In₂O₃ nanowire-like network sensor with characteristic response curve has potential application in preparing multi-functional gas sensors.

A novel electronic nose based on porous In2O3 microtubes sensor array for the discrimination of VOCs

We have innovatively developed an electronic nose consisting of only one type of semiconductor metal oxide (SMO) material. The representative SMO material, porous In2O3 microtubes in this work, offered great surface area and large gas penetration channels. By using a solvent casting process, different amounts of porous In2O3 microtubes were coated on Al2O3 substrate, forming a resistometric SMO sensor array-based electronic nose. Each sensing unit in the electronic nose exhibited independent response toward ethanol. We have successfully applied this electronic nose to distinguish four alcohols at the same concentrations (100 ppm), and also utilized the electronic nose for the discrimination of 14 volatile organic compounds (VOCs). Clear differentiation among all the 14 VOCs both at their immediately dangerous to life or health (IDLH) and the permissible exposure limit (PEL) concentrations has been achieved with no errors or misclassifications. We expect that this method will expand the application of SMO sensor array-based electronic nose which has been largely limited by the selection of commercially available SMOs and dopants.

Platinum nanoparticles on electrospun titania nanofibers as hydrogen sensing materials working at room temperature

Platinum nanoparticles (PtNPs), with diameters of 3-10 nm, were synthesized by water phase reduction, using 3-mercapto-1-propanesulfonate (3MPS) as a hydrophilic capping agent. PtNPs were deposited by a dipcoating technique on titania nanofibers (TiO2NFs), obtained by electrospinning. The investigated properties of the Pt-TiO2 hybrid at room temperature show that this material combines the properties of photoconduction of titania and the photocatalytic activity of the hybrid. To assess the best performance of Pt-TiO2, different measurements were performed at room temperature, comparing hydrogen response under UV of the uncoated TiO2NFs, compared with the Pt-TiO2 system prepared with two different amounts of PtNPs. During the sensing tests toward hydrogen an enhancement of photoconductivity (150%), an increase in response (400%) and an overall improvement of their dynamic behaviour were observed.

Effective decoration of Pd nanoparticles on the surface of SnO2 nanowires for enhancement of CO gas-sensing performance

Decoration of noble metal nanoparticles (NPs) on the surface of semiconducting metal oxide nanowires (NWs) to enhance material characteristics, functionalization, and sensing abilities has attracted increasing interests from researchers worldwide. In this study, we introduce an effective method for the decoration of Pd NPs on the surface of SnO2 NWs to enhance CO gas-sensing performance. Single-crystal SnO2 NWs were fabricated by chemical vapor deposition, whereas Pd NPs were decorated on the surface of SnO2 NWs by in situ reduction of the Pd complex at room temperature without using any linker or reduction agent excepting the copolymer P123. The materials were characterized by advanced techniques, such as high-resolution transmission electron microscopy, scanning transmission electron microscopy, and energy-dispersive X-ray spectroscopy. The Pd NPs were effectively decorated on the surface of SnO2 NWs. As an example, the CO sensing characteristics of SnO2 NWs decorated with Pd NPs were investigated at different temperatures. Results revealed that the gas sensor exhibited excellent sensing performance to CO at low concentration (1-25ppm) with ultrafast response-recovery time (in seconds), high responsivity, good stability, and reproducibility.

Platinum nanostructures via self-assembly of an amyloid-like peptide: a novel electrocatalyst for the oxygen reduction

An aniline-GGAAKLVFF peptide (AFP) was prepared by solid-phase synthesis. The peptide can readily self-assemble into fibrils. Platinum nanoparticles (Pt NPs) were directly immobilized on the surface of the AFP fibrils via electrostatic interaction. Compared to other currently available techniques for the fabrication of metal-peptide fibrils, the noncovalent functionalization strategy is able to deposit nanoparticles on peptide fibrils with different morphologies and high metal loading, which is important for applications in catalysis, electronic materials and other corresponding fields. The Pt-AFP fibrils were employed to modify the electrode, which exhibits high electrocatalytic activities towards oxygen reduction. Thus, the Pt-AFP fibrils hold great potential for polymer electrolyte fuel cells and other electrochemical applications.

High-performance room-temperature hydrogen sensors based on combined effects of Pd decoration and Schottky barriers

A new hydrogen sensor was fabricated by coating a Pd-decorated In2O3 film on Au electrodes. In response to 1 vol% H2 at room temperature, an ultra high sensitivity of 4.6 × 10(7) was achieved. But after an annealing treatment in vacuum, its sensitivity degenerated by 4 orders of magnitude. In addition, the response time and recovery time were also extended from 28 s and 32 s to 242 s and 108 s, respectively. It was found from contrast experiments that Pd decoration was essential to make the sensor work at room temperature and Schottky barriers played a vital role in enhancing the sensor's performance. The methodology demonstrated in this paper shows that a combination of novel sensing materials and Schottky contact is an effective approach to design high-performance gas sensors.