Fine structural tuning of diphenylaniline-based dyes for designing semiconductors relevant to dye-sensitized solar cells

Motivated by recent study on synthesized N, N-diphenylaniline (DPA)-based dyes [DOI: https://doi.org/10.1016/j.solener.2022.01.062 ] for use in dye-sensitized solar cells (DSSCs), we theoretically design several dyes and explore their potential for enhancing the efficiency of DSSCs. Our designed dyes are based on the molecular structure of synthesized DPA-azo-A and DPA-azo-N dyes with a donor-π-bridge-acceptor (D-π-A) framework. In this research, we aim to develop the power conversion efficiency (PCE) of DSSCs by fine-tuning the molecular structure of the synthesized dyes. To this end, we focus on designing dyes by replacing the units of DPA-azo-A and DPA-azo-N with a variety of donor, π-bridge, and acceptor. Hence the density functional theory (DFT) and time-dependent density functional theory (TD-DFT) calculations are done to explore their structure, electronic, optical, charge transport, and photovoltaic properties. Among all newly designed and reference dyes, the D3-azo-N and DPA-π3-N dyes which are designed by substituting the donor (DPA) and π-bridge (azo) units of DPA-azo-N with D3 and π3, respectively exhibit the highest PCE of 45.46% (for D3-azo-N) and 43.20% (for DPA-π3-N) and can be favorable dyes for improving the efficiency of DSSCs. Therefore, the dyes that are designed by substituting the donor and π-bridge units of synthesized dyes have more impact on improving the efficiency of DSSCs than those that involve replacing the acceptor units. Consequently, our theoretical findings will provide valuable insights for the experimentalists to employ these novel effective dyes and boost the performance of DSSCs.

Far-red active unsymmetrical squaraine dyes containing N-arylated indoline donors for dye sensitized solar cells

Squaraine dyes possess sharp far-red active transition with high extinction coefficient and form aggregates on TiO2 surface. Aggregation of dyes on TiO2 has been considered as a detrimental factor for DSSC device performance, which can be controlled by appending alkyl groups to the dye structures. Hence by integrating alkylated (alkyl groups with both in-plane and out-of-plane) aryl group with indoline moiety to make it compatible with other electrolytes and for controlling the dye-aggregation, a series of squaraine acceptor-based dyes SQA4-6 have been designed and synthesized. SQA4-6 dyes showed absorption between 642 and 653 nm (λmax), photophysical and electrochemical studies indicated that the HOMO energy levels of this sets of dyes are well aligned with the potentials of I-/I 3 - and [Co(bpy)3]2+/3+ redox shuttles for better dye regeneration process. DSSC device efficiency of 3% has been achieved for SQA5 dye with iodolyte (I-/I 3 - ) electrolyte in the presence of 0.3 mM of chenodeoxycholic acid (CDCA). The IPCE profile of DSSC device fabricated with SQA4-6 dyes indicated the contribution of aggregated structures for the photocurrent generation.

The role of the donor group and electron-accepting substitutions inserted in π-linkers in tuning the optoelectronic properties of D-π-A dye-sensitized solar cells: a DFT/TDDFT study

The design of low-cost and high-efficiency sensitizers is one of the most important factors in the expansion of dye-sensitized solar cells (DSSCs). To obtain effective sensitizer dyes for applications in dye-sensitized solar cells, a series of metal-free organic dyes with the D–π–A–A arrangement and with different donor and acceptor groups have been designed by using computational methodologies based on density functional theory (DFT) and time-dependent density functional theory (TD-DFT). We have designed JK-POZ(1–3) and JK-PTZ(1–3) D–π–A–A organic dyes by modifying the donor and π-linker units of the JK-201 reference dye. Computational calculations of the structural, photochemical properties and electrochemical properties, as well as the key parameters related to the short-circuit current density and open-circuit voltage, including light-harvesting efficiency (LHE), singlet excited state lifetime (τ), reorganization energies (λ_total), electronic injection-free energy (ΔG^inject) and regeneration driving forces (ΔG^reg) of dyes were calculated and analyzed. Moreover, charge transfer parameters, such as the amount of charge transfer (q^CT), the charge transfer distance (D^CT), and dipole moment changes (μ^CT), were investigated. The results show that ΔG^reg, λ_max, λ_total and τ of JK-POZ-3 and JK-PTZ-3 dyes are superior to those of JK-201, indicating that novel JK-POZ-3 and JK-PTZ-3 dyes could be promising candidates for improving the efficiency of the DSSCs devices.

A series of metal-free organic dyes with the D–π–A–A arrangement and with different donor and acceptor groups have been designed theoretically.

Molecular engineering of ruthenium-based photosensitizers with superior photovoltaic performance in DSSCs: novel N-alkyl 2-phenylindole-based ancillary ligands

In this work, we report the design and successful synthesis of two new heteroleptic polypyridyl Ru(ii) complexes (SD-5 and SD-6), by incorporating hetero-aromatic electron-donating N-alkyl-2-phenylindole moieties into the ancillary ligand.

Targeted and selective HOMO energy control by fine regulation of molecular planarity and its effect on the interfacial charge transfer process in dye-sensitized solar cells

In terms of the in-depth development of organic dyes, targeted and selective energy control is becoming a more and more important objective. Herein, four indoline sensitizers based on D-π-A-π-A construction were designed and synthesized with exactly the same donor and acceptor segments. Their molecular planarity was regulated by introducing various side chains into donor bridges. Interestingly, along with an improvement of planarity at a donor bridge, the HOMO levels of the dyes lift gradually, and more importantly, their LUMO levels remain at around the same value. Besides, better molecular planarity is obviously preferred to obtain higher charge injection efficiency but, an overly planar molecule may cause an overly high HOMO level, leading to poor dye regeneration efficiency. Furthermore, an appropriate side chain also restrains charge recombination to some extent, while an overly large side chain gives more chance for I3- to recombine with charge in the conduction band. Accordingly, our results demonstrated that regulation of planarity at a donor bridge not only provides targeted and selective control of the HOMO of the dye, but also enable fine adjustment with multiple interfacial charge transfer processes. Molecular planarity deserves to play an important role in the design of organic dyes, providing a significant strategy for the further development of organic sensitizers.

Effect of donor modification on the photo-physical and photo-voltaic properties of N-alkyl/aryl amine based chromophores

Six push–pull sensitizers (MD1 to MD6) having rhodanine-3-acetic acid acting as an electron withdrawing group and N-alkyl/aryl amine as a donor moiety were planned and prepared to rationalize the influence of donor alteration on absorption/emission properties and photon to current conversion efficiency (η).

Effects of the terminal donor unit in dyes with D-D-π-A architecture on the regeneration mechanism in DSSCs: a computational study

This theoretical study on dye-sensitized solar cells (DSSCs) includes design strategies for dye donor units to improve the efficiency of DSSCs, and further illuminates the organic dye regeneration mechanism. We have designed a series of new organic sensitizers based on a D-D-π-A architecture to exhibit easy electron transfer and to have remarkable light harvesting properties in the visible region by density functional theory (DFT) and time-dependent (TD)-DFT calculations. Furthermore, the interaction of the organic sensitizers with the conventional redox electrolyte using the triiodide/iodide couple (I3-/I-) is investigated. Our calculations indicate that incorporation of strong electron-donating groups remarkably improves the charge transfer characteristics, optoelectronic properties and rapid dye regeneration as compared to less electron donating substituents. In addition, our study demonstrates the possibility of second electron injection from the oxidized dye complex to the semiconductor surface, which further confirms our recently proposed dye regeneration mechanism.

Multimolecular assemblies on high surface area metal oxides and their role in interfacial energy and electron transfer

High surface area metal oxides offer a unique substrate for the assembly of multiple molecular components at an interface.

Simple adjustments to the molecular planarity of organic sensitizers: towards highly selective optimization of energy levels

Along with the specified planarization of molecular π-bridges, the LUMO levels of dyes can be effectively and selectively stabilized.

Molecular design of organic small molecules based on diindole–diimide with fused aromatic heterocycles as donors for organic solar cells

A series of novel diindole–diimide based molecules with different aromatic end groups have been designed as charge transport and donor materials for organic solar cells (OSCs).

Can fused-pyrrole rings act as better π-spacer units than fused-thiophene in dye-sensitized solar cells? A computational study

Fused-pyrrole rings can be potential π-spacers in dye-sensitized solar cells.

Rational Molecular Engineering of Indoline-Based D-A-π-A Organic Sensitizers for Long-Wavelength-Responsive Dye-Sensitized Solar Cells

Indoline-based D-A-π-A organic sensitizers are promising candidates for highly efficient and long-term stable dye-sensitized solar cells (DSSCs). In order to further broaden the spectral response of the known indoline dye WS-2, we rationally engineer the molecular structure through enhancing the electron donor and extending the π-bridge, resulting in two novel indoline-based D-A-π-A organic sensitizers WS-92 and WS-95. By replacing the 4-methylphenyl group on the indoline donor of WS-2 with a more electron-rich carbazole unit, the intramolecular charge transfer (ICT) absorption band of dye WS-92 is slightly red-shifted from 550 nm (WS-2) to 554 nm (WS-92). In comparison, the incorporation of a larger π-bridge of cyclopentadithiophene (CPDT) unit in dye WS-95 not only greatly bathochromatically tunes the absorption band to 574 nm but also largely enhances the molar extinction coefficients (ε), thus dramatically improving the light-harvesting capability. Under the standard global AM 1.5 solar light condition, the photovoltaic performances of both organic dyes have been evaluated in DSSCs on the basis of the iodide/triiodide electrolyte without any coadsorbent or cosensitizer. The DSSCs based on WS-95 display better device performance with power conversion efficiency (η) of 7.69%. The additional coadsorbent in the dye bath of WS-95 does not improve the photovoltaic performance, indicative of its negligible dye aggregation, which can be rationalized by the grafted dioctyl chains on the CPDT unit. The cosensitization of WS-95 with a short absorption wavelength dye S2 enhances the IPCE and improves the η to 9.18%. Our results indicate that extending the π-spacer is more rational than enhancing the electron donor in terms of broadening the spectral response of indoline-based D-A-π-A organic sensitizers.

Dynamic Characteristics of Aggregation Effects of Organic Dyes in Dye-Sensitized Solar Cells

Two organic dyes (LS-1 and IQ4) containing identical electron donor and acceptor units but distinct π units result in significantly different power conversion efficiency of the corresponding dye-sensitized solar cells (DSSCs): LS-1, 4.4%, and IQ4, 9.2%. Herein, we combine first-principle calculations and molecular dynamics to explore the aggregation effects of LS-1 and IQ4 by comparing their optical properties and intermolecular electronic couplings. The calculated absorption spectra are in good agreement with the experimental observations and reveal them to be evidently affected by the dimerization. Furthermore, molecular dynamics simulations show that steric hindrance induced by the diphenylquinoxaline unit in IQ4 can elongate the distances between intermolecular π units or electron donors, which are responsible for the fact that the intermolecular electronic coupling of LS-1 is about 10 times larger than that of IQ4. More importantly, the aggregated IQ4 remains almost perpendicular to the TiO2 surface, whereas LS-1 gradually tilts during the dynamic simulation, impacting electron injection and recombination in several ways, which clarifies why IQ4 leads to larger photocurrent and higher conversion efficiency. The deep understanding of the dye aggregation effects sheds new light on the complex factors determining DSSC function and paves the way for rational design of high-efficiency self-anti-aggregation sensitizers.

Improvement of dye-sensitized solar cells performance through introducing different heterocyclic groups to triarylamine dyes

The overall power conversion efficiency (PCE) of DSSCs based on TTR1–3 with chenodeoxycholic acid (CDCA) coadsorbant are 5.20%, 5.71% and 6.30%, respectively, and the value of TTR3 is close to that of N719 (6.62%).

The effect of porphyrins suspended with different electronegative moieties on the photovoltaic performance of monolithic porphyrin-sensitized solar cells with carbon counter electrodes

Compared with WH-C3 and WH-C4, the WH-C5-sensitized device shows a significantly enhanced V_oc, J_sc and power conversion efficiency (η).

Functional tuning of organic dyes containing 2,7-carbazole and other electron-rich segments in the conjugation pathway

Organic dyes containing a triarylamine donor, a cyanoacrylic acid acceptor and a conjugation pathway composed of 2,7-carbazole, thiophene and fluorene have been synthesized and characterized as sensitizers for TiO₂-based dye-sensitized solar cells.

Densely packed siloxane barrier for blocking electron recombination in dye-sensitized solar cells

A challenge in developing photovoltaic devices is to minimize the loss of electrons, which can seriously deteriorate energy conversion efficiency. In particular, minimizing this negative process in dye-sensitized solar cells (DSCs) is imperative. Herein, we use three different kinds of siloxanes, which are adsorbable to titania surfaces and polymerizable in forming a surface passivation layer, to reduce the electron loss. The siloxanes used are tetraethyl orthosilicate (TEOS or compound A), 1-(3-(1H-imidazol-1-yl)propyl)-3-(3-triethoxysilyl) propyl) urea (compound B), and N-(3-triethoxysilylpropyl)-N'[3-(3-methyl-1H-imidazol-3-ium) propyl] urea iodide (compound C). Titania surface passivation by either compound B or C was comparatively more effective in increasing the electron lifetime than TEOS. In the case of small-sized TEOS combined with either large-sized compound B or C, a thinner and denser passivation layer was presumably developed, thus increasing electron lifetime further. Intriguingly, device AB shows the longest electron lifetime, whereas device AC has the highest energy conversion efficiency among these experimental conditions. These results suggest that, in this special case, the electron lifetime may not be a dominant parameter in determining the energy conversion efficiency.

Theoretical investigation of phenothiazine-triphenylamine-based organic dyes with different π spacers for dye-sensitized solar cells

Three phenothiazine-triphenylamine-based organic dyes (CD-1, CD-2 and CD-3) are designed based on the dye WD-8. The geometries, electronic structures, and electronic absorption spectra of these dyes before and after binding to TiO2 are studied by density functional theory (DFT) and time-dependent density functional theory (TD-DFT). The calculated geometries indicate that these dyes show good steric hindrance effect which is advantage to inhibit the close intermolecular π-π aggregation effectively. The lowest unoccupied molecular orbital (LUMO) and highest occupied molecular orbital (HOMO) energy levels of these dyes could ensure positive effect on the process of electron injection and dye regeneration. The simulated spectra of CD-1∼3 show better absorption than that of WD-8 in the low energy zone. All the calculated results demonstrate that these dyes could be used as potential sensitizers for DSSCs and show better performances than WD-8.

Hierarchical visible-light-response Ag/AgCl@TiO2 plasmonic photocatalysts for organic dye degradation

A plasmonic photocatalyst of Ag/AgCl@TiO2 nanoparticles (NPs) was directly prepared by a one-step sonochemical method. Both Ag NPs and AgCl were co-deposited on TiO2 NPs to form Ag@TiO2 and Ag/AgCl@TiO2 using the method. Due to the localized surface plasmonic effects of Ag NPs, the visible-light absorbance of the Ag/AgCl@TiO2 photocatalyst was dramatically increased and the photocatalytic activity to decompose Rhodamine B was much improved under visible light. In addition, due to the advantages of the sonochemical approach, only a very small amount of Ag is required to obtain a high photocatalytic activity in the plasmonic catalyst. The mechanism for the enhancement of the visible-light-driven photocatalytic activities was also analyzed.

Arylamine organic dyes for dye-sensitized solar cells

Arylamine organic dyes with donor (D), π-bridge (π) and acceptor (A) moieties for dye-sensitized solar cells (DSCs) have received great attention in the last decade because of their high molar absorption coefficient, low cost and structural variety. In the early stages, the efficiency of DSCs with arylamine organic dyes with D-π-A character was far behind that of DSCs with ruthenium(II) complexes partly due to the lack of information about the relationship between the chemical structures and the photovoltaic performance. However, exciting progress has been recently made, and power conversion efficiencies over 10% were obtained for DSCs with arylamine organic dyes. It is thus that the recent research and development in the field of arylamine organic dyes employing an iodide/triiodide redox couple or polypyridyl cobalt redox shuttles as the electrolytes for either DSCs or solid-state DSCs has been summarized. The cell performance of the arylamine organic dyes are compared, providing a comprehensive overview of arylamine organic dyes, demonstrating the advantages/disadvantages of each class, and pointing out the field that needs to reinforce the research direction in the further application of DSCs.

Constructing high-efficiency D-A-π-A-featured solar cell sensitizers: a promising building block of 2,3-diphenylquinoxaline for antiaggregation and photostability

Controlling the sensitizer morphology on a nanocrystalline TiO2 surface is beneficial to facilitating electron injection and suppressing charge recombination. Given that the grafted alkyl chain on a π-bridge thiophene segment for preventing π aggregation can deteriorate its intrinsic photostability, we incorporate a promising building block of 2,3-diphenylquinoxaline as the additional acceptor to construct a novel D-A-π-A-featured dye IQ4, which exhibits several characteristics: (i) efficiently decreasing the molecular HOMO-LUMO energy gap by extending its absorption bands; (ii) showing a moderate electron-withdrawing capability for an ideal balance in both promising photocurrent and photovoltage; (iii) endowing an ideal morphology control with strong capability of restraining the intermolecular aggregation and facilitating the formation of a compact sensitizer layer via two twisted phenyl groups grafted onto the quinoxaline unit. The coadsorbent-free dye-sensitized solar cell (DSSC) based on dye IQ4 exhibits very promising conversion efficiency as high as 9.24 ± 0.05%, with a short-circuit current density (Jsc) of 17.55 mA cm(-2), an open-circuit voltage (Voc) of 0.74 V, and a fill factor (FF) of 0.71 under AM 1.5 illumination (100 mW cm(-2)). IQ4-based DSSC devices with an ionic liquid electrolyte can keep constant performance during a 1000 h aging test under 1 sun at 60 °C. Because of spatial restriction, the two phenyl groups grafted onto the additional electron-withdrawing quinoxaline are demonstrated as efficient building blocks, not only improving its photostability and thermal stability but also allowing it to be a successful antiaggregation functional unit. As a consequence, the incorporated 2,3-diphenylquinoxaline unit can realize a facile structural modification for constructing organic coadsorbent-free D-A-π-A-featured sensitizers, thus paving a way to replace the common, stability-deleterious grafted alkyl chain on the thienyl bridge.

Solution-processed organic photovoltaics based on indoline dye molecules developed in dye-sensitized solar cells

A donor-acceptor (D-A) type indoline dye, D149, was used as an electron donor in solution-processed organic solar cells (OSCs). For bulk-heterojunction (BHJ) type OSCs with PC₇₀BM as electron acceptor, the power conversion efficiency (PCE) is sensitive to the amount of D149 in the D149/PC₇₀BM blend film. When the concentration of D149 in the blend film was as low as 5%, the highest PCE of up to 1.29%, together with a short-circuit current density (Jsc) of 4.58 mA·cm⁻², an open-circuit voltage (Voc) of 0.90 V and a fill factor (FF) of 0.31, was achieved. In order to improve the PCE of D149-based OSCs, a bilayer-heterojunction configuration with C₇₀ as electron acceptor has been employed. By optimizing the thickness of the D149 layer and varying the electron- and hole-transport layers, a highest PCE of up to 2.28% with a Jsc of 4.38 mA·cm⁻², a Voc of 0.77 V, and an FF of 0.62 was achieved under AM 1.5G solar illumination (100 mW·cm⁻²).

Organic sensitizers from D-π-A to D-A-π-A: effect of the internal electron-withdrawing units on molecular absorption, energy levels and photovoltaic performances

The high performance and low cost of dye-sensitized solar cells (DSSCs) have drawn great interest from both academic and industrial circles. The research on exploring novel efficient sensitizers, especially on inexpensive metal-free pure organic dyes, has never been suspended. The donor-π bridge-acceptor (D-π-A) configuration is mainstream in the design of organic sensitizers due to its convenient modulation of the intramolecular charge-transfer nature. Recently, it has been found that incorporation of additional electron-withdrawing units (such as benzothiadiazole, benzotriazole, quinoxaline, phthalimide, diketopyrrolopyrrole, thienopyrazine, thiazole, triazine, cyanovinyl, cyano- and fluoro-substituted phenyl) into the π bridge as internal acceptors, termed the D-A-π-A configuration, displays several advantages such as tuning of the molecular energy levels, red-shift of the charge-transfer absorption band, and distinct improvement of photovoltaic performance and stability. We apply the D-A-π-A concept broadly to the organic sensitizers containing additional electron-withdrawing units between electron donors and acceptors. This review is projected to summarize the category of pure organic sensitizers on the basis of the D-A-π-A feature. By comparing the structure-property relationship of typical photovoltaic D-A-π-A dyes, the important guidelines in the design of such materials are highlighted.