Ultrasonic Preparation of Nano-CaCO3 Templates and Hollow Mesoporous SiO2 Nanoparticles for Voriconazole Loading

CaCO3 nanoparticles (nano-CaCO3) as nano-templates were prepared using CaCl2 and Na2CO3 solutions under controlled sonication (19.5 kHz). Using the same ultrasonic device, subsequently, hollow mesoporous silica nanoparticles (HMSNs) were obtained by the hard template of nano-CaCO3. HMSNs were selected as carriers for the antifungal drug voriconazole (VOR) loading to overcome poor water solubility. Three-dimensional CaCO3 nanosheets HMSNs were obtained under gentle sonication. Three-dimensional CaCO3 nanosheets of 24.5 nm (hydrodynamic diameter) were obtained under 17.6 W for 3 min. HMSNs were synthesized by double-template method with nano-CaCO3 as the hard template. Transmission electron microscopy measurements showed that the prepared HMSNs possess hollow structures with particle size between 110 and 120 nm. Nitrogen physisorption at -196 °C revealed that the HMSNs had high surface area (401.57 m2/g), high pore volume (0.11 cm3/g), and uniform pore size (2.22 nm) that facilitated the effective encapsulation of VOR in the HMSNs. The loading capacity of VOR (wt%) on the HMSNs was 7.96%, and the total VOR release amount of VOR-HMSNs material was 71.40% at 480 min. The kinetic model confirmed that the release mechanism of HMSNs nanoparticles followed Fickian diffusion at pH = 7.4 and 37 °C. Moreover, the cumulative VOR release at 42 °C (86.05%) was higher than that at 37 °C (71.40%). The cumulative release amount of VOR from the VOR-HMSNs material was 92.37% at pH = 5.8 at the same temperature. Both nano-CaCO3 templates and HMSNs were prepared by sonication at 19.5 kHz. The as-prepared HMSNs can effectively encapsulate VOR and released drug by Fickian diffusion.

Formulation of arginine-loaded mesoporous silica nanoparticles (Arg@MSNs) modified orthodontic adhesive

OBJECTIVES

The objective of this study was to synthesize arginine loaded mesoporous silica nanoparticles (Arg@MSNs), develop a novel orthodontic adhesive using Arg@MSNs as modifiers, and investigate the adhesive performance, antibacterial activity, and biocompatibility.

METHODS

Arg@MSNs were synthesized by immobilizing arginine into MSNs and characterized using transmission electron microscope (TEM), dynamic light scattering (DLS), and Fourier Transform Infrared Spectrometer (FT-IR). Arg@MSNs were incorporated into Transbond XT adhesive with different mass fraction to form functional adhesives. The degree of conversion (DC), arginine release behavior, adhesive performance, antibacterial activity against Streptococcus mutans biofilm, and cytotoxicity were comprehensively evaluated.

RESULTS

TEM, DLS, and FT-IR characterizations confirmed the successful preparation of Arg@MSNs. The incorporation of Arg@MSNs did not significantly affect DC and exhibited clinically acceptable bonding strength. Compared to the commercial control, the Arg@MSNs modified adhesives greatly suppressed the metabolic activity and polysaccharide production while increased the biofilm pH values. The cell counting kit (CCK)-8 test indicated no cytotoxicity.

CONCLUSIONS

The novel orthodontic adhesive containing Arg@MSNs exhibited significantly enhanced antibacterial activities and inhibitory effects on acid production compared to the commercial adhesive without compromising their bonding strength or biocompatibility.

CLINICAL SIGNIFICANCE

The novel orthodontic adhesive containing Arg@MSNs exhibits potential clinical benefits in preventing demineralization of enamel surfaces around or beneath orthodontic brackets due to its enhanced antibacterial activities and acid-producing inhibitory effects.

Gas-Phase Functionalization of Phytoglycogen Nanoparticles and the Role of Reagent Structure in the Formation of Self-Limiting Hydrophobic Shells

A suite of acyl chloride structural isomers (C6H11OCl) was used to effect gas-phase esterification of starch-based phytoglycogen nanoparticles (PhG NPs). The surface degree of substitution (DS) was quantified using X-ray photoelectron spectroscopy, while the overall DS was quantified using 1H NMR spectroscopy. Gas-phase modification initiates at the NP surface, with the extent of surface and overall esterification determined by both the reaction time and the steric footprint of the acyl chloride reagent. The less sterically hindered acyl chlorides diffuse fully into the NP interior, while the branched isomers are restricted to the near-surface region and form self-limiting hydrophobic shells, with shell thicknesses decreasing with increasing steric footprint. These differences in substitution were also reflected in the solubility of the NPs, with water solubility systematically decreasing with increasing DS. The ability to separately control both the surface and overall degree of functionalization and thereby form thin hydrophobic shells has significant implications for the development of polysaccharide-based biopolymers as nanocarrier delivery systems.

In Silico, In Vitro, and In Vivo Evaluation of Caffeine-Coated Nanoparticles as a Promising Therapeutic Avenue for AML through NF-Kappa B and TRAIL Pathways Modulation

BACKGROUND

Advancements in nanoscience have led to a profound paradigm shift in the therapeutic applications of medicinally important natural drugs. The goal of this research is to develop a nano-natural product for efficient cancer treatment.

METHODS AND RESULTS

For this purpose, mesoporous silica nanoparticles (MSNPs) were formulated, characterized, and loaded with caffeine to develop a targeted drug delivery system, i.e., caffeine-coated nanoparticles (CcNPs). In silico docking studies were conducted to examine the binding efficiency of the CcNPs with different apoptotic targets followed by in vitro and in vivo bioassays in respective animal models. Caffeine, administered both as a free drug and in nanomedicine form, along with doxorubicin, was delivered intravenously to a benzene-induced AML model. The anti-leukemic potential was assessed through hematological profiling, enzymatic biomarker analysis, and RT-PCR examination of genetic alterations in leukemia markers. Docking studies show strong inter-molecular interactions between CcNPs and apoptotic markers. In vitro analysis exhibits statistically significant antioxidant activity, whereas in vivo analysis exhibits normalization of the genetic expression of leukemia biomarkers STMN1 and S1009A, accompanied by the restoration of the hematological and morphological traits of leukemic blood cells in nanomedicine-treated rats. Likewise, a substantial improvement in hepatic and renal biomarkers is also observed. In addition to these findings, the nanomedicine successfully normalizes the elevated expression of GAPDH and mTOR induced by exposure to benzene. Further, the nanomedicine downregulates pro-survival components of the NF-kappa B pathway and upregulated P53 expression. Additionally, in the TRAIL pathway, it enhances the expression of pro-apoptotic players TRAIL and DR5 and downregulates the anti-apoptotic protein cFLIP.

CONCLUSIONS

Our data suggest that MSNPs loaded with caffeine, i.e., CcNP/nanomedicine, can potentially inhibit transformed cell proliferation and induce pro-apoptotic TRAIL machinery to counter benzene-induced leukemia. These results render our nanomedicine as a potentially excellent therapeutic agent against AML.

Gelation Dynamics during Photo-Cross-Linking of Polymer Nanocomposite Hydrogels

Embedding nanomaterials into polymer hydrogels enables the design of functional materials with tailored chemical, mechanical, and optical properties. Nanocapsules that protect interior cargo and disperse readily through a polymeric matrix have drawn particular interest for their ability to integrate chemically incompatible systems and to further expand the parameter space for polymer nanocomposite hydrogels. The properties of polymer nanocomposite hydrogels depend on the material composition and processing route, which were explored systematically in this work. The gelation kinetics of network-forming polymer solutions with and without silica-coated nanocapsules bearing polyethylene glycol (PEG) surface ligands were investigated using in situ dynamic rheology measurements. Network-forming polymers comprised either 4-arm or 8-arm star PEG with terminal anthracene groups, which dimerize upon irradiation with ultraviolet (UV) light. The PEG-anthracene solutions exhibited rapid gel formation upon UV exposure (365 nm); gel formation was observed as a crossover from liquid-like to solid-like behavior during in situ small-amplitude oscillatory shear rheology. This crossover time was non-monotonic with polymer concentration. Far below the overlap concentration (c/c* ≪ 1), spatially separated PEG-anthracene molecules were subject to forming intramolecular loops over intermolecular cross-links, thereby slowing the gelation process. Near the polymer overlap concentration (c/c* ∼ 1), rapid gelation was attributed to the ideal proximity of anthracene end groups from neighboring polymer molecules. Above the overlap concentration (c/c* > 1), increased solution viscosities hindered molecular diffusion, thereby reducing the frequency of dimerization reactions. Adding nanocapsules to PEG-anthracene solutions resulted in faster gelation than nanocapsule-free PEG-anthracene solutions with equivalent effective polymer concentrations. The final elastic modulus of nanocomposite hydrogels increased with nanocapsule volume fraction, signifying synergistic mechanical reinforcement by nanocapsules despite not being cross-linked into the polymer network. Overall, these findings quantify the impact of nanocapsule addition on the gelation kinetics and mechanical properties of polymer nanocomposite hydrogels, which are promising materials for applications in optoelectronics, biotechnology, and additive manufacturing.

Rapid microwave hydrothermal processed spinel Co3O4nanospheres infused N-doped graphene nanosheets for high-performance battery

Spinel Co₃O₄nanospheres have been synthesized by the microwave-assisted hydrothermal method. The N-doped graphene nanosheets (NGN) were synthesized using Hummer's method. The prepared spinel Co₃O₄and NGN were mixed under certain proportions using an ultrasonication process and treated with microwave radiation to prepare a novel spinel Co₃O₄nanospheres infused NGN. The synthesized samples were characterized by x-ray diffraction, Raman spectroscopy, Zetasizer, scanning electron microscope/transmission electron microscopy and x-ray photoelectron spectroscopy for identifying crystal structure and phase, particle size, and the morphology of the nanostructure and the elemental configuration, respectively. The prepared spinel Co₃O₄/NGN were used as anode material and lithium metal as a reference electrode to fabricate half cell using Swagelok cell components. The electrochemical properties were studied and found to exhibit a larger specific capacity of 575 mAh g^-1compared to traditional graphite electrodes, after 100 cycles under 0.1 C rate with a coulombic efficiency of ≈100%. The good electrochemical properties ascribe to the distinctive surface morphological nanostructures of nanoporous nanospheres of spinel Co₃O₄nanospheres and nanosheets of N-doped graphene that reduce the lithium-ion diffusion pathway. The developed anode material would be a potential electrode for lithium ion battery applications.

Hollow structures as drug carriers: Recognition, response, and release

Hollow structures have demonstrated great potential in drug delivery owing to their privileged structure, such as high surface-to-volume ratio, low density, large cavities, and hierarchical pores. In this review, we provide a comprehensive overview of hollow structured materials applied in targeting recognition, smart response, and drug release, and we have addressed the possible chemical factors and reactions in these three processes. The advantages of hollow nanostructures are summarized as follows: hollow cavity contributes to large loading capacity; a tailored structure helps controllable drug release; variable compounds adapt to flexible application; surface modification facilitates smart responsive release. Especially, because the multiple physical barriers and chemical interactions can be induced by multishells, hollow multishelled structure is considered as a promising material with unique loading and releasing properties. Finally, we conclude this review with some perspectives on the future research and development of the hollow structures as drug carriers.

Dual stimuli-responsive fungicide carrier based on hollow mesoporous silica/hydroxypropyl cellulose hybrid nanoparticles

The controlled release of pesticides based on nanoparticle platforms has emerged as a new technology for increasing the efficiency of pesticides and for reducing environmental pollution because of their size-dependent and target-modifying properties. In the present study, pH/cellulase dual stimuli-responsive controlled-release formulations (PYR-HMS-HPC) were designed by grafting hydroxypropyl cellulose onto pyraclostrobin-loaded hollow mesoporous silica nanoparticles via an ester linkage. The PYR-HMS-HPC formulations were characterized by Fourier transform infrared spectroscopy, thermogravimetric analyzer, transmission electron microscope and scanning electron microscope. The results demonstrated that PYR-HMS-HPC with a loading capacity of 12.1 wt% showed excellent pyraclostrobin release behaviors in response to acidic environments and the introduction of cellulase, could effectively prevented pyraclostrobin from photolysis. Compared with commercial pyraclostrobin formulations, the PYR-HMS-HPC formulations showed much stronger and statistically significant fungicidal activity against Magnaporthe oryzae from 7 to 21 days. Furthermore, the Allium cepa chromosome aberration assay demonstrated that the PYR-HMS-HPC formulations reduced the genotoxicity of pyraclostrobin. These pH/cellulase dual stimuli-responsive controlled-release formulations are of great interest for sustainable on-demand crop disease protection.

Thermoresponsive polymer gated and superparamagnetic nanoparticle embedded hollow mesoporous silica nanoparticles as smart multifunctional nanocarrier for targeted and controlled delivery of doxorubicin

The design and development of drug-delivery nanocarriers with high loading capacity, excellent biocompatibility, targeting ability and controllability have been the ultimate goal of the biomedical research community. In this work, we have reported the synthesis and characterization of novel and smart thermoresponsive polymer coated and Fe₃O₄ embedded hollow mesoporous silica (HmSiO₂) based multifunctional superparamagnetic nanocarriers for the delivery of doxorubicin (Dox) for cancer treatment. P(NIPAM-MAm) coated and Fe₃O₄ nanoparticle (NP) embedded hollow mesoporous silica nanocomposite (HmSiO₂-F-P(NIPAM-MAm)) was prepared by the in situ polymerization of NIPAM and MAm monomers on the surface of hollow mesoporous silica NPs (HmSiO₂) in the presence of Fe₃O₄ NPs, oxidizer and crosslinker. TEM analysis showed nearly spherical morphology of HmSiO₂-F-P(NIPAM-MAm) nanocarrier with a diameter in the range of 100-300 nm. The coating of P(NIPAM-MAm) layer and embedding of Fe₃O₄ NPs on the surface of the HmSiO₂ NPs was revealed by HRTEM analysis. XRD and FTIR analysis also confirmed the presence of P(NIPAM-MAm) shells and Fe₃O₄ NPs on hollow mesoporous silica NPs. VSM analysis suggested the superparamagnetic nature of HmSiO₂-F-P(NIPAM-MAm) nanocarrier. DSC analysis of HmSiO₂-F-P(NIPAM-MAm) nanocarrier showed a phase transition at the temperature of ∼38 °C. The prepared HmSiO₂-F-P(NIPAM-MAm) nanocarrier was investigated for its suitability for drug-delivery application using doxorubicin as the model drug by an in vitro method. The encapsulation efficiency and encapsulation capacity were found to be 95% and 6.8%, respectively. HmSiO₂-F-P(NIPAM-MAm)-Dox has shown a pH and temperature-dependent Dox release profile. A relatively faster release of Dox from the nanocarrier was observed at temperature above the lower critical solution temperature (LCST) than below the LCST. HmSiO₂-F-P(NIPAM-MAm) nanocarrier was found to be biocompatible in nature. In vitro cytotoxicity studies against Hela cells suggested that the HmSiO₂-F-P(NIPAM-MAm)-Dox nanocomposite nanocarrier has good anticancer activity. In vitro cellular uptake study of HmSiO₂-F-P(NIPAM-MAm)-Dox nanocomposite nanocarrier demonstrated its good internalisation ability into Hela cells. Thus, the prepared nanocomposites show potential as nanocarrier for targeted and controlled drug delivery for cancer treatment.

Effects of shell thickness of hollow poly(lactic acid) nanoparticles on sustained drug delivery for pharmacological treatment of glaucoma

Structural designing of carriers with extended drug release profiles is critically important for achieving long-acting drug delivery systems toward efficient managements of chronic diseases. Here, we present a strategy to exploit the effects of the shell thickness of hollow poly(lactic acid) nanoparticles (HPLA NPs) in sustained glaucoma therapy. Formulations based on pilocarpine-loaded HPLA NPs with tailorable shell thickness ranging from 10 to 100 nm were shown to be highly compatible with human lens epithelial cells in vitro and with rabbit eyes in vivo. Specifically, shell thickness regulated the release of pilocarpine, with thick shells (~70 to 100 nm) providing sustained drug release performance but limited drug-loading efficiency, whereas ultrathin shells (~10 nm) induced the opposite effects. Remarkably, moderately thick shells (~40 nm) showed the most effective release profile of pilocarpine (above the therapeutic levels of ~10 µg/mL for over 56 days). In a rabbit model of glaucoma, single intracameral administration of an HPLA NP-based formulation with shell thickness of ~40 nm sustainably alleviated ocular hypertension for over 56 days, consequently protecting the structural integrity of the corneal endothelium, preserving the electrophysiological functions of the retina, and attenuating retinal and optic nerve degeneration in progressively glaucomatous eyes. The findings therefore implied a promising use of shell thickness effects in the development of long-acting drug delivery systems for pharmacological treatment of chronic ocular diseases. STATEMENT OF SIGNIFICANCE: Owing to their large surface areas and modifiable structures, nanoparticles have been considered as a promising platform for drug delivery; however, achieving drug nanocarrier systems with reduced burst release and sustained therapeutic efficacy remains challenges. This work presents the first report on rational design of hollow poly(lactic acid) nanocarriers for tailoring the structure-property-function relationships toward effective treatment of glaucoma. The shell thickness of the hollow nanocarriers is demonstrated to have influential impacts on pilocarpine encapsulation efficiency and release profile, indicating that the most sustained delivery performance (maintaining the release of pilocarpine above therapeutic level over 56 days) can be obtained for the polymeric nanoparticles with moderate shell thickness of ~40 nm.

Direct silica coating of drug crystals for ultra-high loading

To push the limit of synthetic control, we create a thin layer (5 nm) of silica on the surface of drug nanocrystals, achieving a loading content (88%) that approaches the theoretical limit. The uniform silica shell provides a tailored diffusion barrier for controlled drug release. The method can be generally applied to 11 organic crystals, including 4 drugs.

Regulating Payload Release from Hybrid Nanocapsules with Dual Silica/Polycaprolactone Shells

We describe a facile strategy to synthesize hybrid nanocapsules with an oil core for hindering interactions between payloads and silica shell. Polycaprolactone/silica nanocapsules are synthesized by an interfacial sol-gel process occurring simultaneously with internal phase separation of the polymer produced by a miniemulsion-solvent evaporation technique. The localization of the polycaprolactone in the nanocapsules is depending on the ratio between polymer and silica. Formation of hybrid nanocapsules is found to significantly hinder interactions of drugs such as ibuprofen and carbamazepine with the silica surface.

Nanocarriers and Their Loading Strategies

Nanocarriers are of paramount significance for drug delivery and nanomedicine technology. Given the imperfect systems and nonideal therapeutic effects, there are works to be done in synthesis as much as in biological studies, if not more so. Building the foundation of synthesis would offer more tools and deeper insights for exploring the biological systems with extreme complexity. This review aims at a broad-scope summary and classification of nanocarriers for drug delivery, with focus on the synthetic strategy and structural implications. The nanocarriers are divided into four categories according to the loading principle: molecular-level loading, surface loading, matrix loading, and cavity loading systems. Making comparisons across diverse nanocarrier systems would make it easier to see the fundamental characteristics, from where the weakness can be addressed and the strengths combined. The systematic comparisons may also inspire new ideas and methods.

An amphiphilic organosilicon framework (AOF): a new solid Pickering catalyst carrier

The amphiphilicity of the AOF carrier originates from the amphiphilic pyridine groups in the frameworks of the nanoparticles.

Chlorhexidine-encapsulated mesoporous silica-modified dentin adhesive

OBJECTIVES

This work aims to explore the feasibility of chlorhexidine-encapsulated mesoporous silica (CHX@pMSN) as a modifier of a commercial dental adhesive via the evaluation of physicochemical properties and antibacterial capabilities of adhesive-dentin interface.

METHODS

Therapeutic adhesives were developed in the present study by incorporating CHX@pMSN into a commercial adhesive at four mass fractions (0, 1, 5 and 10 wt.%). The antibacterial capability on Streptococcus mutans (S. mutans) biofilm, conversion degree, adhesive morphology, microtensile bond strength (MTBS) and nanoleakage expression were evaluated comprehensively.

RESULTS

MTT and CLSM evaluation showed that CHX@pMSN-doped adhesive inhibits S. mutans biofilm growth, while CHX is released from the modified adhesive continuously. The incorporation of CHX@pMSN did not affect immediate bond strength at the concentration of 1% and 5% (P >  0.05). Moreover, these bonds were mainly preserved in 5% CHX@pMSN group after one month of collagenase ageing. Meanwhile, CHX@pMSN-doped adhesive groups exhibited similar nanoleakage distribution compared with the control.

CONCLUSION

This study showed that the 5% CHX@pMSN-modified adhesive achieved balance amongst unaffected immediate bonding strength, well-preserved bonds against collagenase ageing and effective inhibition of S. mutans biofilm growth.

CLINICAL SIGNIFICANCE

CHX@pMSN-modified dentin adhesive can potentially extend the service life of adhesive restoration in clinic.

Confined small-sized cobalt catalysts stimulate carbon-chain growth reversely by modifying ASF law of Fischer-Tropsch synthesis

Fischer–Tropsch synthesis (FTS) is a promising technology to convert syngas derived from non-petroleum-based resources to valuable chemicals or fuels. Selectively producing target products will bring great economic benefits, but unfortunately it is theoretically limited by Anderson–Schulz–Flory (ASF) law. Herein, we synthesize size-uniformed cobalt nanocrystals embedded into mesoporous SiO₂ supports, which is likely the structure of water-melon seeds inside pulps. We successfully tune the selectivity of products from diesel-range hydrocarbons (66.2%) to gasoline-range hydrocarbons (62.4%) by controlling the crystallite sizes of confined cobalt from 7.2 to 11.4 nm, and modify the ASF law. Generally, larger Co crystallites increase carbon-chain growth, producing heavier hydrocarbons. But here, we interestingly observe a reverse phenomenon: the uniformly small-sized cobalt crystallites can strongly adsorb active C* species, and the confined structure will inhibit aggregation of cobalt crystallites and escape of reaction intermediates in FTS, inducing the higher selectivity towards heavier hydrocarbons.

Fischer–Tropsch synthesis (FTS) is theoretically limited by Anderson–Schulz–Flory (ASF) law. Here, the authors successfully tune the selectivity of products from diesel-range hydrocarbons to gasoline-range hydrocarbons in FTS by controlling the crystallite sizes of confined cobalt, and modify the ASF law.

Size and morphology-controlled synthesis of vernier yttrium oxyfluoride towards enhanced photoluminescence and white light emission

In this study, various shapes and sizes of vernier yttrium fluoride (Y₅O₄F₇ denoted as V-YOF) were synthesized to improve fluorescence properties.

Two-step synthesis of hole structure bastnasite (RECO3F RE = Ce, La, Pr, Nd) sub-microcrystals with tunable luminescence properties

A two-step synthetic route using RE(OH)CO₃ colloid spheres as the sacrificial template was designed to prepare monodisperse, pure bastnasite (RECO₃F: RE = Ce, La, Pr, Nd) with a hole structure for the first time.

Development of Polymer Microcapsules Functionalized with Fucoidan to Target P-Selectin Overexpressed in Cardiovascular Diseases

New tools for molecular imaging and targeted therapy for cardiovascular diseases are still required. Herein, biodegradable microcapsules (MCs) made of polycyanoacrylate and polysaccharide and functionalized with fucoidan (Fuco-MCs) are designed as new carriers to target arterial thrombi overexpressing P-selectin. Physicochemical characterizations demonstrated that microcapsules have a core-shell structure and that fucoidan is present onto the surface of Fuco-MCs. Furthermore, their sizes range from 2 to 6 µm and they are stable on storage over 30 d at 4 °C. Flow cytometry experiments evidenced the binding of Fuco-MCs for human activated platelets as compared to MCs (mean fluorescence intensity: 12 008 vs. 9, p < 0.001) and its absence for nonactivated platelets (432). An in vitro flow adhesion assay showed high specific binding efficiency of Fuco-MCs to P-selectin and to activated platelet aggregates under arterial shear stress conditions. Moreover, both types of microcapsules reveal excellent compatibility with 3T3 cells in cytotoxicity assay. One hour after intravenous injection of microcapsules, histological analysis revealed that Fuco-MCs are localized in the rat abdominal aortic aneurysm thrombotic wall and that the binding in the healthy aorta is low. In conclusion, these microcapsules appear as promising carriers for targeting of tissues characterized by P-selectin overexpression and for their molecular imaging or treatment.

Stability effect of cholesterol-poly(acrylic acid) in a stimuli-responsive polymer-liposome complex obtained from soybean lecithin for controlled drug delivery

The development of polymer-liposome complexes (PLCs), in particular for biomedical applications, has grown significantly in the last decades. The importance of these studies comes from the emerging need in finding intelligent controlled release systems, more predictable, effective and selective, for applications in several areas, such as treatment and/or diagnosis of cancer, neurological, dermatological, ophthalmic and orthopedic diseases, gene therapy, cosmetic treatments, and food engineering. This work reports the development and characterization of a pH sensitive system for controlled release based on PLCs. The selected hydrophilic polymer was poly(acrylic acid) (PAA) synthesized by atom transfer radical polymerization (ATRP) with a cholesterol (CHO) end-group to improve the anchoring of the polymer into the lipid bilayer. The polymer was incorporated into liposomes formulated from soybean lecithin and stearylamine, with different stearylamine/phospholipid and polymer/phospholipid ratios (5, 10 and 20%). The developed PLCs were characterized in terms of particle size, polydispersity, zeta potential, release profiles, and encapsulation efficiency. Cell viability studies were performed to assess the cytotoxic potential of PLCs. The results showed that the liposomal formulation with 5% of stearylamine and 10% of polymer positively contribute to the stabilization of the complexes. Afterwards, the carboxylic acid groups of the polymer present at the surface of the liposomes were crosslinked and the same parameters analyzed. The crosslinked complexes showed to be more stable at physiologic conditions. In addition, the release profiles at different pHs (2-12) revealed that the obtained complexes released all their content at acidic conditions. In summary, the main accomplishments of this work are: (i) innovative synthesis of cholesterol-poly(acrylic acid) (CHO-PAA) by ATRP; (ii) stabilization of the liposomal formulation by incorporation of stearylamine and CHO-PAA; (iii) new approach for CHO-PAA crosslinking, resulting in more stable PLCs at physiological conditions; (iv) destabilization of PLCs upon slight changes of pH, showing their pH sensitivity; and (v) the PLCs do not exhibit cellular toxicity.

Redox stimuli-responsive hollow mesoporous silica nanocarriers for targeted drug delivery in cancer therapy

In order to specifically deliver drugs into cancer cells with targeted recognition and controlled release, biocompatible hollow mesoporous silica nanocarriers with tumor-targeting and glutathione-responsive release dual properties were developed. These multifunctional nanocarriers were fabricated by anchoring transferrin on the surface of hollow mesoporous silica nanoparticles through disulfide bond conjugation, which could be cleaved in the presence of glutathione. In this case, transferrin acted as the gatekeeper to control the drug release, and as a tumor-targeting agent to improve drug accumulation at the tumor site simultaneously. The detailed investigations indicate that the anticancer drug (doxorubicin) release from the nanocarriers was strongly dependent on the concentration of glutathione. The capacity of the nanocarriers to selectively deliver doxorubicin to the tumor cells was demonstrated in vitro and in vivo. The doxorubicin-loaded nanocarriers showed enhanced inhibition of tumor growth and minimal side-effects in vivo compared to free doxorubicin. These redox stimuli-responsive nanocarriers that achieved a combination of tumor targeting and controlled drug release provide a promising platform for efficient cancer therapies.

Analyte-responsive gated hollow mesoporous silica nanoparticles exhibiting inverse functionality and an AND logic response

A multifunctional nanoparticle with designed selectivity was made using hollow mesoporous silica, ship-in-a-bottle synthesis of a crystalline solid-state detector, and protection of the crystal by acid-responsive nanogates. The system demonstrates the inverse application of the usual trapping of contents by the gate followed by their release. Instead, the gate protects the contents followed by selective exposure. Crystallization of [Pt(tpy)Cl](PF₆) (tpy = 2,2':6',2''-terpyridine) inside the cavity of hollow mesoporous silica created the unique core/shell nanoparticle. The crystalline core becomes fluorescent in the presence of perchlorate. By condensing an acid-sensitive gate onto the particle, access to the pores is blocked and the crystal is protected. The new nanomaterial obeys Boolean AND logic; only the presence of both the analyte (ClO₄^-) and acid results in the optical response.

Interfacial engineering for silica nanocapsules

Silica nanocapsules have attracted significant interest due to their core-shell hierarchical structure. The core domain allows the encapsulation of various functional components such as drugs, fluorescent and magnetic nanoparticles for applications in drug delivery, imaging and sensing, and the silica shell with its unique properties including biocompatibility, chemical and physical stability, and surface-chemistry tailorability provides a protection layer for the encapsulated cargo. Therefore, significant effort has been directed to synthesize silica nanocapsules with engineered properties, including size, composition and surface functionality, for various applications. This review provides a comprehensive overview of emerging methods for the manufacture of silica nanocapsules, with a special emphasis on different interfacial engineering strategies. The review starts with an introduction of various manufacturing approaches of silica nanocapsules highlighting surface engineering of the core template nanomaterials (solid nanoparticles, liquid droplets, and gas bubbles) using chemicals or biomolecules which are able to direct nucleation and growth of silica at the boundary of two-phase interfaces (solid-liquid, liquid-liquid, and gas-liquid). Next, surface functionalization of silica nanocapsules is presented. Furthermore, strategies and challenges of encapsulating active molecules (pre-loading and post-loading approaches) in these capsular systems are critically discussed. Finally, applications of silica nanocapsules in controlled release, imaging, and theranostics are reviewed.

AIE Luminogen-Functionalized Hollow Mesoporous Silica Nanospheres for Drug Delivery and Cell Imaging

Hollow mesoporous silica nanospheres functionalized with aggregation-induced emission (AIE) luminogen tetraphenylethene were prepared by postgrafting method. The as-prepared inorganic-organic hybrid nanospheres show bright blue emission and good biocompatibility as shown by MTT assays. The large cavities of the materials enable high loading of the anticancer drug doxorubicin hydrochloride (DOX), and the mesoporous silica shells allow pH-dependent drug release. The materials can be effectively taken up by cells and function as luminescent bioprobes, demonstrating their potential application in imaging-guided therapy.

A pH-responsive nanocontainer based on hydrazone-bearing hollow silica nanoparticles for targeted tumor therapy

pH-responsive hollow silica nanoparticles blocked with hyaluronic acid molecules for targeted tumor therapy with high efficiency and good biocompatibility.

Facile synthesis of hollow mesoporous zinc silicate nanoparticles using a dual surfactant system

A new synthetic route for hollow mesoporous zinc silicate and silica nanoparticles is developed using a dual surfactant system.

One-pot controllable synthesis of carboxylic group functionalized hollow mesoporous silica nanospheres for efficient cisplatin delivery

A simple one-pot synthesis and functionalization of HMSNs with COOH as a sustained and controlled release drug delivery system.

Improved optical properties of silica/UV-cured polymer composite films made of hollow silica nanoparticles with a hierarchical structure for light diffuser film applications

This study successfully improved the optical properties of silica/UV-cured polymer composite films made of hollow silica nanoparticles having a hierarchical structure.

Double loaded self-decomposable SiO₂ nanoparticles for sustained drug release

Sustained drug release for a long duration is a desired feature of modern drugs. Using double-loaded self-decomposable SiO2 nanoparticles, we demonstrated sustained drug release in a controllable manner. The double loading of the drugs was achieved using two different mechanisms-the first one via a co-growth mechanism, and the second one by absorption. A two-phase sustained drug release was firstly revealed in an in vitro system, and then further demonstrated in mice. After a single intravenous injection, the drug was controllably released from the nanoparticles into blood circulation with a Tmax of about 8 h, afterwards a long lasting release pattern was achieved to maintain drug systemic exposure with a plasma elimination half-life of approximately 28 h. We disclosed that the absorbed drug molecules contributed to the initial fast release for quickly reaching the therapeutic level with relatively higher plasma concentrations, while the "grown-in" drugs were responsible for maintaining the therapeutic level via the later controlled slow and sustained release. The present nanoparticle carrier drug configuration and the loading/maintenance release mechanisms provide a promising platform that ensures a prolonged therapeutic effect by controlling drug concentrations within the therapeutic window-a sustained drug delivery system with a great impact on improving the management of chronic diseases.

The control of epidermal growth factor grafted on mesoporous silica nanoparticles for targeted delivery

The performance of biomaterials in a biological environment is largely influenced by the surface properties of the biomaterials. In particular, grafted targeting ligands significantly impact the subsequent cellular interactions. The utilisation of a grafted epidermal growth factor (EGF) is effective for targeted delivery of drugs to tumours, but the amount of these biological attachments cannot be easily quantified as most characterization methods could not detect the extremely low amount of EGF ligands grafted on the surface of nanoparticles. In this study, hollow mesoporous silica nanoparticles (HMSNs) were functionalized with amine groups to conjugate with EGFs via carbodiimide chemistry. Time of flight secondary ion mass spectrometry (ToF-SIMS), a very surface specific technique (penetration depth <1.5 nm), was employed to study the binding efficiency of the EGF to the nanoparticles. Principal component analysis (PCA) was implemented to track the relative surface concentrations of EGFs on HMSNs. It was found that ToF-SIMS combined with the PCA technique is an effective method to evaluate the immobilization efficiency of EGFs. Based on this useful technique, the quantity and density of the EGF attachments that grafted on nanoparticles can be effectively controlled by varying the EGF concentration at grafting stages. Cell experiments demonstrated that the targeting performance of EGFR positive cells was affected by the number of EGFs attached on HMSNs.

Tumor-Targeting Multifunctional Rattle-Type Theranostic Nanoparticles for MRI/NIRF Bimodal Imaging and Delivery of Hydrophobic Drugs

The development of theranostic systems capable of diagnosis, therapy, and target specificity is considerably significant for accomplishing personalized medicine. Here, a multifunctional rattle-type nanoparticle (MRTN) as an effective biological bimodal imaging and tumor-targeting delivery system is fabricated, and an enhanced loading ability of hydrophobic anticancer drug (paclitaxel) is also realized. The rattle structure with hydrophobic Fe3 O4 as the inner core and mesoporous silica as the shell is obtained by one-step templates removal process, and the size of interstitial hollow space can be easily adjusted. The Fe3 O4 core with hydrophobic poly(tert-butyl acrylate) (PTBA) chains on the surface is not only used as a magnetic resonance imaging (MRI) agent, but contributes to improving hydrophobic drug loading amount. Transferrin (Tf) and a near-infrared fluorescent dye (Cy 7) are successfully modified on the surface of the nanorattle to increase the ability of near-infrared fluorescence (NIRF) imaging and tumor-targeting specificity. In vivo studies show the selective accumulation of MRTN in tumor tissues by Tf-receptor-mediated endocytosis. More importantly, paclitaxel-loaded MRTN shows sustained release character and higher cytotoxicity than the free paclitaxel. This theranostic nanoparticle as an effective MRI/NIRF bimodal imaging probe and drug delivery system shows great potential in cancer diagnosis and therapy.

One-step synthesis of amine-functionalized hollow mesoporous silica nanoparticles as efficient antibacterial and anticancer materials

In this study, amine-functionalized hollow mesoporous silica nanoparticles with an average diameter of ∼100 nm and shell thickness of ∼20 nm were prepared by an one-step process. This new nanoparticulate system exhibited excellent killing efficiency against mycobacterial (M. smegmatis strain mc(2) 651) and cancer cells (A549).

A soft–hard template approach towards hollow mesoporous silica nanoparticles with rough surfaces for controlled drug delivery and protein adsorption

Novel hollow mesoporous silica nanoparticles (HMSNs) with rough surfaces have been successfully prepared using a facile soft–hard template route.

Silica-based nanocapsules: synthesis, structure control and biomedical applications

Synthesis and structure engineering of silica-based nanocapsules for biomedical applications.

A facile and novel approach for preparing monodispersed hollow aluminosilica microspheres with thin shell structures

Monodispersed hollow aluminosilica microspheres with thin shell structures have been successfully synthesized via a facile, novel method.