Biomedical applications of graphene-based nanomaterials: recent progress, challenges, and prospects in highly sensitive biosensors

Graphene-based nanomaterials (graphene, graphene oxide, reduced graphene oxide, graphene quantum dots, graphene-based nanocomposites, etc.) are emerging as an extremely important class of nanomaterials primarily because of their unique and advantageous physical, chemical, biological, and optoelectronic aspects. These features have resulted in uses across diverse areas of scientific research. Among all other applications, they are found to be particularly useful in designing highly sensitive biosensors. Numerous studies have established their efficacy in sensing pathogens and other biomolecules allowing for the rapid diagnosis of various diseases. Considering the growing importance and popularity of graphene-based materials for biosensing applications, this review aims to provide the readers with a summary of the recent progress in the concerned domain and highlights the challenges associated with the synthesis and application of these multifunctional materials.

Recent developments in MOF and MOF based composite as potential adsorbents for removal of aqueous environmental contaminants

With the growth of globalization which has been the primary cause of water pollution, it is utmost necessary for us living being to have access to clean water for the purpose of drinking, washing and various other useful applications. With the purpose of future security and to restore our ecological balance, it is essential to give much significance towards the removal of unwanted toxic contaminants from our water resources. In this regard adsorptive removal of toxic pollutants from wastewater with porous adsorbent is regarded as one of the most promising way for water decontamination process. Metal organic frameworks (MOFs) comprising of uniformly arranged pores, abundant active sites and containing an easily tunable structure has aroused as a promising material for adsorbent to remove the unwanted contaminants from water sources. The adsorption of pollutants by the different MOFs surface are driven by various interactions including π-π, acid-base, electrostatic and H-bonding etc. On the other hand, the removal of various contaminants by MOFs is influenced by various factors including pH, temperature and initial concentration. In this review we will specifically discuss the adsorptive removal of different organic and inorganic pollutants present in our water systems with the use of MOFs as adsorbent along with the various factors and interaction mechanism manipulating the adsorption behaviour.

Metal-organic frameworks/carbon-based materials for environmental remediation: A state-of-the-art mini-review

In recent years, many research groups started to study the combination of metal-organic frameworks (MOFs) with nanocarbon materials, which showed the excellent improved performances than MOFs alone. The addition of carbon materials such as graphene oxides (GOs) and carbon nanotubes (CNTs) into MOFs can improve the physico-chemical properties of parent MOFs with excellent chemical robustness, high mechanical and distinguished electronic thermal robustness. These advantages facilitate the wider applications of MOFs/carbon materials (MOFs-C) in more research fields. This paper is devoted to reviewing the recent studies about the preparation and applications of MOFs-C in environmental remediation. This paper discusses the efficient adsorptive removal of a wide range of pollutants by MOFs-C, including organic contaminants and heavy metals from water as well as VOCs and some other toxic gases from atmospheric environment. Additionally, the catalytic performance of these nanocomposites for photocatalysis and Fenton-like oxidation of water pollutants is discussed in details. Meanwhile, the significant roles of nanocarbons and in-depth mechanisms for improved adsorption or catalysis are summarized. Finally, future perspectives on the development and application of MOFs-C composites for pollution remediation are presented at the end of this paper.

A review on graphene-based nanocomposites for electrochemical and fluorescent biosensors

Biosensors with high sensitivity, selectivity and a low limit of detection, reaching nano/picomolar concentrations of biomolecules, are important to the medical sciences and healthcare industry for evaluating physiological and metabolic parameters.

Shape Controlled Hierarchical Porous Hydrophobic/Oleophilic Metal-Organic Nanofibrous Gel Composites for Oil Adsorption

A versatile and facile synthetic route toward a ultralight hierarchical poroushybrid composed of metal-organic gels and fluorinated graphene oxide is reported. The composite gels show excellent absorbency of oil and various organic solvents due to their prominent meso/macropores, notable hydrophobicity, and superoleophilicity.

Boosted Sensor Performance by Surface Modification of Bifunctional rht-Type Metal-Organic Framework with Nanosized Electrochemically Reduced Graphene Oxide

The surface and interface could be designed to enhance properties of electrocatalysts, and they are regarded as the key characteristics. This report describes surface modification of a bifunctional rht-type metal-organic framework (MOF, Cu-TDPAT) with nanosized electrochemically reduced graphene oxide (n-ERGO). The hybrid strategy results in a Cu-TDPAT-n-ERGO sensor with sensitive and selective response toward hydrogen peroxide (H₂O₂). Compared with Cu-TDPAT, Cu-TDPAT-n-ERGO exhibits significantly enhanced electrocatalytic activities, highlighting the importance of n-ERGO in boosting their electrocatalytic activity. The sensor shows a wide linear detection range (4-12 000 μM), and the detection limit is 0.17 μM (S/N = 3) which is even lower than horseradish peroxidase or recently published noble metal nanomaterial based biosensors. Moreover, the sensor displays decent stability, excellent anti-interference performance, and applicability in human serum and urine samples. Such good sensing performance can be explained by the synergetic effect of bifunctional Cu-TDPAT (open metal sites and Lewis basic sites) and n-ERGO (excellent conductive property). It is expected that rht-type MOF-based composites can provide wider application potential for the construction of bioelectronics devices, biofuel cells, and biosensors.

Covalent cross-linking as a strategy to generate novel materials based on layered (2D) and other low D structures

Covalent linking of 2D structures such as graphene, MoS₂and C₃N₄by employing coupling reactions provides a strategy to generate a variety of materials with new or improved properties.

Polyhydroquinone-graphene composite as new redox species for sensitive electrochemical detection of cytokeratins antigen 21-1

Polyhydroquinone-graphene composite as a new redox species was synthesized simply by a microwave-assisted one-pot method through oxidative polymerization of hydroquinone by graphene oxide, which exhibited excellent electrochemical redox activity at 0.124 V and can remarkably promote electron transfer. The as-prepared composite was used as immunosensing substrate in a label-free electrochemical immunosensor for the detection of cytokeratins antigen 21-1, a kind of biomarker of lung cancer. The proposed immunosensor showed wide liner range from 10 pg mL(-1) to 200 ng mL(-1) with a detection limit 2.3 pg mL(-1), and displayed a good stability and selectivity. In addition, this method has been used for the analysis of human serum sample, and the detection results showed good consistence with those of ELISA. The present substrate can be easily extended to other polymer-based nanocomposites.

New CNT/poly(brilliant green) and CNT/poly(3,4-ethylenedioxythiophene) based electrochemical enzyme biosensors

A combination of the electroactive polymer poly(brilliant green) (PBG) or conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) with carbon nanotubes to obtain CNT/PBG and CNT/PEDOT modified carbon film electrodes (CFE) has been investigated as a new biosensor platform, incorporating the enzymes glucose oxidase (GOx) as test enzyme, alcohol oxidase (AlcOx) or alcohol dehydrogenase (AlcDH). The sensing parameters were optimized for all biosensors based on CNT/PBG/CFE, CNT/PEDOT/CFE platforms. Under optimized conditions, both GOx biosensors exhibited very similar sensitivities, while in the case of AlcOx and AlcDH biosensors, AlcOx/CNT/PBG/CFE was found to give a higher sensitivity and lower detection limit. The influence of dissolved O2 on oxidase-biosensor performance was investigated and was shown to be different for each enzyme. Comparisons were made with similar reported biosensors, showing the advantages of the new biosensors, and excellent selectivity against potential interferents was successfully demonstrated. Finally, alcohol biosensors were successfully used for the determination of ethanol in alcoholic beverages.

Facile and controllable synthesis of triplex Au@Ag–Pt@infinite coordination polymer core–shell nanoparticles for highly efficient immobilization of enzymes and enhanced electrochemical biosensing activity

Well-dispersed Au@Ag–Pt@infinite coordination polymer core–shell nanoparticles (Au@Ag–Pt@ICPs NPs) are presented as effective host matrixes for biosensing of enzymes.

Network nanostructured polypyrrole hydrogel/Au composites as enhanced electrochemical biosensing platform

In this work, a new network nanocomposite composed of polypyrrole hydrogel (PPy hydrogel) loaded gold nanoparticles (AuNPs) was prepared. The PPy hydrogel was directly synthesized by mixing the pyrrole monomer and phytic acid, and the mixed solution can be gelated to form hydrogel at once. The three-dimensional network nanostructured PPy hydrogel not only provided a greater effective surface area for increasing the quantity of immobilized biomolecules and facilitated the transport of electrons and ions, but also exhibited an improved conductivity. Meanwhile, the electrodeposited AuNPs on the PPy hydrogel can further increase the specific surface area to capture a large amount of antibodies as well as improve the capability of electron transfer. The network PPy hydrogel/Au nanocomposites were successfully employed for the fabrication of a sensitive label-free amperometric immunosensor. Carcinoembryonic antigen (CEA) was used as a model protein. The proposed immunosensor exhibited a wide linear detection range from 1 fg mL(-1) to 200 ng mL(-1), and an ultralow limit of detection of 0.16 g mL(-1) (S/N = 3), and it also possessed good selectivity. Moreover, the detection of CEA in ten human serums showed satisfactory accuracy compared with the data determined by ELISA, indicating that the immunosensor provided potential application for clinical diagnosis.

Electrochemical capacitance of Ni-doped metal organic framework and reduced graphene oxide composites: more than the sum of its parts

Composites of a Ni-doped metal organic framework (MOF) with reduced graphene oxide (rGO) are synthesized in bulk (gram scale) quantities. The composites are composed of rGO sheets, which avoid restacking from the physical presence of MOF crystals. At larger concentration of rGO, the MOF crystals are distributed on the overlapping and continuous rGO sheets. Ni in Ni-doped MOF is found to engage in a two-electron, reversible, efficient, redox reaction shuttling between Ni and Ni(OH)2 in aqueous potassium hydroxide (KOH) electrolyte. The reaction is rather unique as Ni-based supercapacitors use a one-electron transfer Faradaic redox reaction between Ni(OH)2 and NiO(OH). Employing electrochemical impedance spectroscopy, we determined the charge transfer resistance to be 184 mΩ for MOF, 74 mΩ for a Ni-doped MOF and 6 mΩ for a rGO-Ni-doped MOF composite, but these modifications do not affect the mass transfer resistance. This novel redox reaction in conjunction with the lowered charge transfer resistance from the introduction of rGO underpins the synergy that dramatically increases the capacitance to 758 F/g in the rGO-Ni-doped MOF composite, when the parent MOF could store only 100 F/g and a physical composite of rGO and Ni-doped MOF could algebraically achieve about 240 F/g. A generic approach of doping MOFs with a redox active metal and forming a composite with rGO transforms an electro-inactive MOF to high capacity energy storage material with energy density of 37.8 Wh/kg at a power density of 227 W/kg. These results can promote the development of high-performance energy storage materials from the wide family of MOFs available.

Facile preparation of graphene nanoribbon/cobalt coordination polymer nanohybrid for non-enzymatic H2O2 sensing by dual transduction: electrochemical and fluorescence

A novel graphene nanoribbon (GNR)/cobalt coordination polymer (MCPs) composite (MCPs@GNR) is prepared by in situ reduction of graphene oxide nanoribbon (GONR) with simultaneous growth of MCPs nanoparticles on its surface demonstrating high H₂O₂ sensing.

Edge-carboxylated graphene anchoring magnetite-hydroxyapatite nanocomposite for an efficient 4-nitrophenol sensor

Surface chemistry and electrochemical properties of ball milled edge-carboxylated graphene anchored with magnetite-hydroxyapatite nanocomposites were studied through the sensitive and selective detection of 4-NP by cyclic voltammetry and differential pulsed voltammetry.

Enzymatic electrochemical glucose biosensors by mesoporous 1D hydroxyapatite-on-2D reduced graphene oxide

A hydrothermally synthesized mesoporous 1D HAp-on-2D RGO sheets exhibiting direct electrochemistry of glucose biosensing.

Controlled growth of dense and ordered metal–organic framework nanoparticles on graphene oxide

A facile synthetic strategy is developed to modulate the growth and distribution of MOF–graphene oxide (GO) nanohybrids, achieving dense and ordered MOFs featuring different sizes and morphologies dispersed on GO.

CeO2/rGO/Pt sandwich nanostructure: rGO-enhanced electron transmission between metal oxide and metal nanoparticles for anodic methanol oxidation of direct methanol fuel cells

Pt-based nanocomposites have been of great research interest. In this paper, we design an efficient MO/rGO/Pt sandwich nanostructure as an anodic electrocatalyst for DMFCs with combination of the merits of rigid structure of metallic oxides (MOs) and excellent electronic conductivity of reduced oxidized graphene (rGO) as well as overcoming their shortcomings. In this case, the CeO(2)/rGO/Pt sandwich nanostructure is successfully fabricated through a facile hydrothermal approach in the presence of graphene oxide and CeO(2) nanoparticles. This structure has a unique building architecture where rGO wraps up the CeO(2) nanoparticles and Pt nanoparticles are homogeneously dispersed on the surface of rGO. This novel structure endows this material with great electrocatalytic performance in methanol oxidation: it reduces the overpotential of methanol oxidation significantly and its electrocatalytic activity and stability are much enhanced compared with Pt/rGO, CeO(2)/Pt and Pt/C catalysts. This work supplies a unique MO/rGO/Pt sandwich nanostructure as an efficient way to improve the electrocatalytic performance, which will surely shed some light on the exploration of some novel structures of electrocatalyst for DMFCs.