Hydrodynamic shearing of DNA in a polymeric microfluidic device

Effects of Microfluidic Shear on the Plasmid DNA Structure: Implications for Polymeric Gene Delivery Vectors

Microfluidic manufacturing of advanced gene delivery vectors necessitates consideration of the effects of microfluidic shear forces on the structural integrity of plasmid DNA (pDNA). In this paper, we expose pDNA to variable shear forces in a two-phase, gas-liquid microfluidic reactor and apply gel electrophoresis to analyze the products of on-chip shear-induced degradation. The effects of shear rate, solvent environment, pDNA size, and copolymer complexation on shear-induced degradation are investigated. We find that small naked pDNA (pUC18, 2.7 kb) exhibits shear rate-dependent shear degradation in the microfluidic channels in a mixed organic solvent (dioxane/water/acetic acid; 90/10/<0.1 w/w/w), with the extents of both supercoil isoform relaxation and complete fragmentation increasing as the maximum shear rates increase from 4 × 105 to 2 × 106 s-1. However, over the same range of shear rates, the same pDNA sample shows no evidence of microfluidic shear-induced degradation in a pure aqueous environment. Quiescent control experiments in the same mixed organic solvent prove that a combination of solvent and shear forces is involved in the observed shear-induced degradation. Furthermore, we show that shear degradation effects in mixed organic solvents can be significantly attenuated by complexation of pDNA with the block copolymer polycaprolactone-block-poly(2-vinylpyridine) prior to exposure to microfluidic shear. Finally, we demonstrate that medium (pDSK519, 8.1 kb) and large (pRK290, 20 kb) naked pDNA are more sensitive to shear-induced microfluidic degradation in the mixed organic solvent environment than small pDNA, with both plasmids showing complete fragmentation even at the lowest shear rate, although we found no evidence of shear-induced damage in water for the largest investigated naked pDNA even at the highest flow rate. The resulting understanding of the interplay of the solvent and shear effects during microfluidic processing should inform microfluidic manufacturing routes to new gene therapy formulations.

Polydimethylsiloxane microstructure-induced acoustic streaming for enhanced ultrasonic DNA fragmentation on a microfluidic chip

Next-generation sequencing (NGS) is an essential technology for DNA identification in genomic research. DNA fragmentation is a critical step for NGS and doing this on-chip is of great interest for future integrated genomic solutions. Here we demonstrate fast acoustofluidic DNA fragmentation via ultrasound-actuated elastic polydimethylsiloxane (PDMS) microstructures that induce acoustic streaming and associated shear forces when placed in the field of an ultrasonic transducer. Indeed, acoustic streaming locally generates high tensile stresses that can mechanically stretch and break DNA molecule chains. The improvement in efficiency of the on-chip DNA fragmentation is due to the synergistic effect of these tensile stresses and ultrasonic cavitation phenomena. We tested these microstructure-induced effects in a DNA-containing microfluidic channel both experimentally and by simulation. The DNA fragmentation process was evaluated by measuring the change in the DNA fragment size over time. The chip works well with both long and short DNA chains; in particular, purified lambda (λ) DNA was cut from 48.5 kbp to 3 kbp in one minute with selected microstructures and further down to 300 bp within two and a half minutes. The fragment size of mouse genomic DNA was reduced from 1.4 kbp to 400 bp in one minute and then to 200 bp in two and a half minutes. The DNA fragmentation efficiency of the chip equipped with the PDMS microstructures was twice that of the chip without the microstructures. Exhaustive comparison shows that the on-chip fragmentation performance reaches the level of high-end professional standards. Recently, DNA fragmentation was shown to be enhanced using vibrating air microbubbles when the chip was placed in an acoustic field. We think the microbubble-free microstructure-based device we present is easier to operate and more reliable, as it avoids microbubble preparation and maintenance, while showing high DNA fragmentation performance.

High-Throughput Separation of Long DNA in Deterministic Lateral Displacement Arrays

Length-based separation of DNA remains as relevant today as when gel electrophoresis was introduced almost 100 years ago. While new, long-read genomics technologies have revolutionised accessibility to powerful genomic data, the preparation of samples has not proceeded at the same pace, with sample preparation often constituting a considerable bottleneck, both in time and difficulty. Microfluidics holds great potential for automated, sample-to-answer analysis via the integration of preparatory and analytical steps, but for this to be fully realised, more versatile, powerful and integrable unit operations, such as separation, are essential. We demonstrate the displacement and separation of DNA with a throughput that is one to five orders of magnitude greater than other microfluidic techniques. Using a device with a small footprint (23 mm × 0.5 mm), and with feature sizes in the micrometre range, it is considerably easier to fabricate than parallelized nano-array-based approaches. We show the separation of 48.5 kbp and 166 kbp DNA strands achieving a significantly improved throughput of 760 ng/h, compared to previous work and the separation of low concentrations of 48.5 kbp DNA molecules from a massive background of sub 10 kbp fragments. We show that the extension of DNA molecules at high flow velocities, generally believed to make the length-based separation of long DNA difficult, does not place the ultimate limitation on our method. Instead, we explore the effects of polymer rotations and intermolecular interactions at extremely high DNA concentrations and postulate that these may have both negative and positive influences on the separation depending on the detailed experimental conditions.

DNA fragmentation in a steady shear flow

We have determined the susceptibility of T4 DNA (166 kilobase pairs, kbp) to fragmentation under steady shear in a cone-and-plate rheometer. After shearing for at least 30 min at a shear rate of 6000 s - 1 , corresponding to a Reynolds number of O ( 10 3 ) and a Weissenberg number of O ( 10 3 ) , 97.9 ± 1.3 % of the sample is broken into a polydisperse mixture with a number-averaged molecular weight of 62.6 ± 3.2  kbp and a polydispersity index of 1.29 ± 0.03 , as measured by pulsed-field gel electrophoresis (with a 95% confidence interval). The molecular weight distributions observed here from a shear flow are similar to those produced by a (dominantly extensional) sink flow of DNA and are qualitatively different than the midpoint scission observed in simple extensional flow. Given the inability of shear flow to produce a sharp coil-stretch transition, the data presented here support a model where polymers can be fragmented in flow without complete extension. These results further indicate that DNA fragmentation by shear is unlikely to be a significant issue in microfluidic devices, and anomalous molecular weight observations in experiments are due to DNA processing prior to observation in the device.

The enhancement of DNA fragmentation in a bench top ultrasonic water bath with needle-induced air bubbles: Simulation and experimental investigation

Shearing DNA to a certain size is the first step in many medical and biological applications, especially in next-generation gene sequencing technology. In this article, we introduced a highly efficient ultrasonic DNA fragmentation method enhanced by needle-induced air bubbles, which is easy to operate with high throughput. The principle of the bubble-enhanced sonication system is introduced and verified by flow field and acoustic simulations and experiments. Lambda DNA long chains and mouse genomic DNA short chains are used in the experiments for testing the performance of the bubble-enhanced ultrasonic DNA fragmentation system. Air bubbles are an effective enhancement agent for ultrasonic DNA fragmentation; they can obviously improve the sound pressure level in the whole solution, thus, achieving better absorption of ultrasound energy. Growing bubbles also have a stretched function on DNA molecule chains and form a huge pressure gradient in the solution, which is beneficial to DNA fragmentation. Purified λDNA is cut from 48.5 to 2 kbp in 5 min and cut to 300 bp in 30 min. Mouse genomic DNA (≈1400 bp) decreases to 400 bp in 5 min and then reduces to 200 bp in 30 min. This bubble-enhanced ultrasonic method enables widespread access to genomic DNA fragmentation in a standard ultrasonic water bath for many virus sequencing demands even without good medical facilities.

DNA fragmentation in complicated flow fields created by micro-funnel shapes

Micro-funnels have been widely applied to produce extensionally dominant flows for DNA manipulation, such as DNA extension for DNA mapping and DNA fragmentation for gene sequencing. However, it still lacks a systematic understanding of DNA fragmentation behaviors in complicated flow fields regulated by different funnel shapes with high flow rates. This limits the rational design and application scope of related microfluidic devices. In this study, fragmentation experiments of λ DNA were carried out in microfluidic chips with four different micro-funnel shapes, namely a sudden finish, a linear contraction, a constant acceleration, and an increasing extension rate funnel. The experimental results demonstrated a significant effect of the micro-funnel shape on the produced DNA fragment size. Then, the dynamical behaviors of DNA molecules in flow fields created by different micro-funnels were simulated using a numerical method of Brownian dynamics-computational fluid dynamics. The numerical simulation revealed that both the magnitude and distribution of the extension rate of flow fields were drastically altered by the funnel shape, and the extension rate at the micro-scale was the dominant factor of DNA fragmentation. The different DNA fragmentation behaviors in four micro-funnels were investigated from the perspectives including the fragment size distribution, fragmentation location, percentage of broken molecules, conformational type and stretched length of DNA before fragmentation. The results elucidated the significant impact of funnel shape on the dynamical behaviors of DNA fragmentation. This study offers insights into the rational design of microfluidic chips for DNA manipulation.

Modelling DNA extension and fragmentation in contractive microfluidic devices: a Brownian dynamics and computational fluid dynamics approach

Fragmenting DNA into short pieces is an essential manipulation in many biological studies, ranging from genome sequencing to molecular diagnosis. Among various DNA fragmentation methods, microfluidic hydrodynamic DNA fragmentation has huge advantages especially in terms of handling small-volume samples and being integrated into automatic and all-in-one DNA analysis equipment. Despite the fast progress in experimental studies and applications, a systematic understanding of how DNA molecules are distributed, stretched and fragmented in a confined microfluidic field is still lacking. In this work, we investigate the extension and fragmentation of DNA in a typical contractive microfluidic field, which consists of a shear flow-dominated area and an elongational flow-dominated area, using the Brownian dynamics-computational fluid dynamics method. Our results show that the shear flow at the straight part of the microfluidic channel and the elongational flow at the contractive bottleneck together determine the performance of DNA fragmentation. The average fragment size of DNA decreases with the increase of the strain rate of the elongational flow, and the upstream shear flow can significantly precondition the conformation of DNA to produce shorter and more uniform fragments. A systematic study of the dynamics of DNA fragmentation shows that DNA tends to break at the mid-point when the strain rate of elongational flow is small, and the breakage point largely deviates from the midpoint as the strain rate increases. Our simulation of the thorough DNA fragmentation process in a realistic microfluidic field agrees well with experimental results. We expect that our study can shed new light on the development of future microfluidic devices for DNA fragmentation and integrated DNA analysis devices.

High Efficiency Hydrodynamic DNA Fragmentation in a Bubbling System

DNA fragmentation down to a precise fragment size is important for biomedical applications, disease determination, gene therapy and shotgun sequencing. In this work, a cheap, easy to operate and high efficiency DNA fragmentation method is demonstrated based on hydrodynamic shearing in a bubbling system. We expect that hydrodynamic forces generated during the bubbling process shear the DNA molecules, extending and breaking them at the points where shearing forces are larger than the strength of the phosphate backbone. Factors of applied pressure, bubbling time and temperature have been investigated. Genomic DNA could be fragmented down to controllable 1-10 Kbp fragment lengths with a yield of 75.30-91.60%. We demonstrate that the ends of the genomic DNAs generated from hydrodynamic shearing can be ligated by T4 ligase and the fragmented DNAs can be used as templates for polymerase chain reaction. Therefore, in the bubbling system, DNAs could be hydrodynamically sheared to achieve smaller pieces in dsDNAs available for further processes. It could potentially serve as a DNA sample pretreatment technique in the future.

Simple microfluidic stagnation point flow geometries

A geometrically simple flow cell is proposed to generate different types of stagnation flows, using a separation flow and small variations of the geometric parameters. Flows with high local deformation rates can be changed from purely rotational, over simple shear flow, to extensional flow in a region surrounding a stagnation point. Computational fluid dynamic calculations are used to analyse how variations of the geometrical parameters affect the flow field. These numerical calculations are compared to the experimentally obtained streamlines of different designs, which have been determined by high speed confocal microscopy. As the flow type is dictated predominantly by the geometrical parameters, such simple separating flow devices may alleviate the requirements for flow control, while offering good stability for a wide variety of flow types.

Fragmentation of DNA in a sub-microliter microfluidic sonication device

Fragmentation of DNA is an essential step for many biological applications including the preparation of next-generation sequencing (NGS) libraries. As sequencing technologies push the limits towards single cell and single molecule resolution, it is of great interest to reduce the scale of this upstream fragmentation step. Here we describe a miniaturized DNA shearing device capable of processing sub-microliter samples based on acoustic shearing within a microfluidic chip. A strong acoustic field was generated by a Langevin-type piezo transducer and coupled into the microfluidic channel via the flexural lamb wave mode. Purified genomic DNA, as well as covalently cross-linked chromatin were sheared into various fragment sizes ranging from ∼180 bp to 4 kb. With the use of standard PDMS soft lithography, our approach should facilitate the integration of additional microfluidic modules and ultimately allow miniaturized NGS workflows.

Application of metatranscriptomics to soil environments

The activities of soil microbial communities are of critical importance to terrestrial ecosystem functioning. The mechanisms that determine the interactions between soil microorganisms, their environment and neighbouring organisms, however, are poorly understood. Due to advances in sequencing technologies, an increasing number of metagenomics studies are being conducted on samples from diverse environments including soils. This information has not only increased our awareness of the functional potential of soil microbial communities, but also constitutes powerful reference material for soil metatranscriptomics studies. Metatranscriptomics provides a snapshot of transcriptional profiles that correspond to discrete populations within a microbial community at the time of sampling. This information can indicate the potential activities of complex microbial communities and the mechanisms that regulate them. Here we summarise the technical challenges for metatranscriptomics applied to soil environments and discuss approaches for gaining biologically meaningful insight into these datasets.