Guided-wave liquid-crystal photonics

Light Propagation in Confined Nematic Liquid Crystals and Device Applications

Liquid crystals are interesting linear and nonlinear optical materials used to make a wide variety of devices beyond flat panel displays. Liquid crystalline materials can be used either as core or as cladding of switchable/reconfigurable waveguides with either an electrical or an optical control or both. In this paper, materials and main device structures of liquid crystals confined in different waveguide geometries are presented using different substrate materials, such as silicon, soda lime or borosilicate glass and polydimethylsiloxane. Modelling of the behaviour of liquid crystal nanometric molecular reorientation and related refractive index distribution under both low-frequency electric and intense optical fields is reported considering optical anisotropy of liquid crystals. A few examples of integrated optic devices based on waveguides using liquid crystalline materials as core for optical switching and filtering are reviewed. Reported results indicate that low-power control signals represent a significant feature of photonic devices based on light propagation in liquid crystals, with performance, which are competitive with analogous integrated optic devices based on other materials for optical communications and optical sensing systems.

Cylindrical Confinement of Nanocolloidal Cholesteric Liquid Crystal

The organization of nanocolloidal liquid crystals in constrained geometries has fundamental and practical importance, since under confinement, liquid crystals contain stable topological defects that can serve as templates for nanoparticle organization. Three-dimensional confinement of cholesteric (Ch) liquid crystals formed by cellulose nanocrystals (CNCs) have been extensively studied; however, their two-dimensional confinement remains under-investigated. Here, we report the results of systematic experimental studies of two-dimensional confinement of Ch-CNC liquid crystal in cylindrical capillaries with varying inner diameters. Confinement resulted in phase separation of the Ch-CNC liquid crystal into a Ch shell formed by concentric CNC pseudolayers with the helicoidal axis perpendicular to the inner surface of the capillary walls, and a micrometer-diameter isotropic core thread running parallel to the long axis of the capillary. The morphology of the confined Ch-CNC liquid crystal varied when progressively increasing the degree confinement. Finally, we show that phase separation of the Ch-CNC liquid crystal into a Ch shell and an isotropic core is preserved in flexible capillary tubing, suggesting the applicability of this system for the fabrication of flexible optical waveguides.

Fringe field-tunable LC refractive index interface for in-plane beam steering applications

We report on the electrically tunable optical structure based on dual-domain nematic liquid crystal (LC) alignment for in-plane beam steering applications. The device operates due to the total internal reflection of an extraordinary beam at the LC refractive index interface that separates homeotropic and planar-aligned nematics. Patterned electrodes were used in order to switch on the refractive index interface in the bulk of a planar-aligned LC layer. An outstanding feature of the proposed device is the function of tuning the spatial position of the LC interface by means of a fringing electric field, which allowed one to implement wide range light beam microscanning, as well as to realize in-plane angular beam steering with a milliradian resolution.

Electrically Controlled Self-Focusing and Self-Localization in the Guided Channels

In this paper, we demonstrate the potential of liquid crystals (LCs) on the applications of small, simple, and tunable optical guided channels. Experimental results show that three operation modes of beam coupling can be achieved, depending on the feature of the electrically controllable refractive index, the incident position, and the specific design of electrodes. The dependence of the beam polarization on self-focusing and coupling effect are also discussed. The electrically controllable self-focusing and beam coupling are highly potential on integrated photonic circuits.

Surface anchoring of nematic liquid crystal on swollen polymer brush studied by surface forces measurement

Surface anchoring plays a fundamental role in controlling the molecular alignment of a bulk liquid crystal (LC). It has been previously shown that the pretilt angle of a nematic liquid crystal (NLC) can be controlled by changing the grafting density of a liquid crystalline polymer, poly(6-(4-methoxy-azobenzene-4'-oxy) hexyl methacrylate) (PMMAZO). In this study, the thickness of the swollen PMMAZO brush was measured by employing the surface forces apparatus (SFA). NLC 4-cyano-4'-pentylbiphenyl (5CB) and toluene were used as the solvents. It was shown that both 5CB and toluene were good solvents for PMMAZO. The repulsive force in 5CB appeared at D₀ = 98.2 ± 4.6 nm for high grafting density (HD) surfaces, and at 32.1 ± 4.5 nm for the low grafting density (LD) surfaces. These results indicated that the PMMAZO molecules extended nearly perpendicular to the HD surfaces, while they laid on the substrate for the LD surfaces. The interaction between 5CB and the mesogenic group of PMMAZO was stronger than that for toluene. These results could support the expected surface anchoring mechanism of 5CB by the PMMAZO brush.

Designed self-assembly of metamaterial split-ring colloidal particles in nematic liquid crystals

The fabrication of orientationally and positionally ordered colloidal clusters is of interest to several fields from materials science to photonics. An interesting possibility to obtain such colloidal crystalline structures is by the self-assembly of colloidal particles in a liquid crystal matrix. This work demonstrates the self-assembly in a nematic liquid crystal of a specific type of colloidal particle, split ring resonators (SRRs), which are well known in the field of photonic metamaterials and chosen for their ability to obtain resonances in response to a magnetic field. Using free energy minimisation calculations, we specifically optimise geometrical parameters of the SRR particles to reduce and prevent formation of irregular metastable colloidal states, which in more general view corresponds to concepts of pre-designed self-assembly. Using the pre-designed particles, we then show self-assembly into two- and three-dimensional nematic colloidal crystals of split-ring particles. Our work is a contribution to the development of designed large-scale colloidal crystals, the properties of which could be finely tuned with external parameters, and are of high interest for photonic applications, specifically as tunable metamaterials.

Nonlinear Optical Phenomena in a Silicon-Smectic A Liquid Crystal (SALC) Waveguide

Liquid crystals (LCs) are organic materials characterized by the intermediate properties between those of an isotropic liquid and a crystal with a long range order. The LCs possess strong anisotropy of their optical and electro-optical properties. In particular, LCs possess strong optical nonlinearity. LCs are compatible with silicon-based technologies. Due to these unique properties, LCs are promising candidates for the development of novel integrated devices for telecommunications and sensing. Nematic liquid crystals (NLCs) are mostly used and studied. Smectic A liquid crystals (SALCs) have a higher degree of long range order forming a layered structure. As a result, they have lower scattering losses, specific mechanisms of optical nonlinearity related to the smectic layer displacement without the mass density change, and they can be used in nonlinear optical applications. We theoretically studied the nonlinear optical phenomena in a silicon-SALC waveguide. We have shown theoretically that the stimulated light scattering (SLS) and cross-phase modulation (XPM) caused by SALC nonlinearity can occur in the silicon-SALC waveguide. We evaluated the smectic layer displacement, the SALC hydrodynamic velocity, and the slowly varying amplitudes (SVAs) of the interfering optical waves.

Liquid Crystal Elastomer Waveguide Actuators

While most photomechanical materials developed to date have relied on free-space illumination to drive actuation, this strategy fails when direct line-of-site access is precluded. In this study, waveguided light is harnessed by liquid crystal elastomer (LCE) nanocomposites to drive actuation. Using photo-chemical reduction of gold salts to plasmonic nanoparticles, prescription of photoresponsive regions within fibers of mono-domain LCEs is demonstrated with control over both the location along the fiber axis, as well as in the azimuthal direction. Due to localized photothermal heating provided by plasmonic absorption of waveguided light and resulting inhomogeneous thermally induced deformation of the LCE, reversible bending along multiple axes is demonstrated.

Anapole Modes in Hollow Nanocuboid Dielectric Metasurfaces for Refractometric Sensing

This work proposes the use of the refractive index sensitivity of non-radiating anapole modes of high-refractive-index nanoparticles arranged in planar metasurfaces as a novel sensing principle. The spectral position of anapole modes excited in hollow silicon nanocuboids is first investigated as a function of the nanocuboid geometry. Then, nanostructured metasurfaces of periodic arrays of nanocuboids on a glass substrate are designed. The metasurface parameters are properly selected such that a resonance with ultrahigh Q-factor, above one million, is excited at the target infrared wavelength of 1.55 µm. The anapole-induced resonant wavelength depends on the refractive index of the analyte superstratum, exhibiting a sensitivity of up to 180 nm/RIU. Such values, combined with the ultrahigh Q-factor, allow for refractometric sensing with very low detection limits in a broad range of refractive indices. Besides the sensing applications, the proposed device can also open new venues in other research fields, such as non-linear optics, optical switches, and optical communications.

Infiltrated Photonic Crystal Fibers for Sensing Applications

Photonic crystal fibers (PCFs) are a special class of optical fibers with a periodic arrangement of microstructured holes located in the fiber's cladding. Light confinement is achieved by means of either index-guiding, or the photonic bandgap effect in a low-index core. Ever since PCFs were first demonstrated in 1995, their special characteristics, such as potentially high birefringence, very small or high nonlinearity, low propagation losses, and controllable dispersion parameters, have rendered them unique for many applications, such as sensors, high-power pulse transmission, and biomedical studies. When the holes of PCFs are filled with solids, liquids or gases, unprecedented opportunities for applications emerge. These include, but are not limited in, supercontinuum generation, propulsion of atoms through a hollow fiber core, fiber-loaded Bose⁻Einstein condensates, as well as enhanced sensing and measurement devices. For this reason, infiltrated PCF have been the focus of intensive research in recent years. In this review, the fundamentals and fabrication of PCF infiltrated with different materials are discussed. In addition, potential applications of infiltrated PCF sensors are reviewed, identifying the challenges and limitations to scale up and commercialize this novel technology.

Electrically controlled polarization rotator using nematic liquid crystal

Here we report a planar polarization rotator using a nematic liquid crystal waveguide, which is subject to a gradient electric field in parallel to the waveguide substrate plane. The fabricated polydimethylsiloxane (PDMS) device has demonstrated the electrically-controlled polarization rotation at a switching time of 70 ms and a propagation loss of 9 dB/cm at 532 nm. The unique features such as planar form, electric control, and soft material allows integration into planar lightwave circuits and flexible photonics.

Lensing and waveguiding in birefringent double-twist cylinders demonstrated using FDTD simulations

We demonstrate that birefringent profiles of double-twist cylinders, found in some chiral nematic systems such as blue phases, can perform as polarization-selective microlenses and waveguides in the regime of negative birefringence. Specifically, we solve Maxwell's equation using the finite-difference time-domain (FDTD) method, to simulate light propagation through double-twist cylinder birefringent structures. We show that, in case of negative material birefringence, azimuthally polarized beams experience lensing which can further be extended to waveguiding in double-twist cylinders. Lensing and waveguiding efficiency are shown to be strongly dependent on the ratio between the width of the double-twist cylinder profile and the beam width. We further characterize waveguiding in terms of losses, which are investigated in case of straight as well as curved double-twist cylinders. More generally, this work is a contribution to the design and development of (soft) birefringent profiles for optical and photonic applications.

Vertical Alignment of Liquid Crystals Over a Functionalized Flexible Substrate

A simple and effective approach for vertical alignment of liquid crystals (LCs) over a functionalized transparent flexible substrate is described. Surface characterization of this commercially available plastic substrate through X-ray photoelectron spectroscopy (XPS) and attenuated total reflection infrared spectroscopy (ATR-IR) indicated that cellulose acetate is main component of the transparent substrate. This substrate was chemically functionalized with a suitable LC compound. A trimethoxysilane terminated new rod-shaped mesogen is synthesized and covalently attached to the pre-treated film through silane condensation reaction. LC functionalization of the polymer film is confirmed through contact angle (CA), atomic force microscopy (AFM), XPS and ATR-IR spectroscopy studies. Versatility of the LC modified flexible substrates for the alignment of bulk LC sample at substrate-LC interface was assessed for nematic (N) and smectic A (SmA) phases. Remarkably, LC functionalized cellulose acetate films were found to be highly efficient in assisting a perfect homeotropic alignment of LCs (for both, a room temperature N and a high temperature SmA phase) over the entire area of the LC sample under observation indicating their superior aligning ability in comparison to their unmodified and octadecyltrimethoxysilane (OTS) modified counterparts. The demonstrated method of surface modification of flexible polymer film is easy, surface modified substrates are stable for several months, retained their aligning ability intact and more importantly they are reusable with maximum delivery.

Tunable Bragg defect mode in one-dimensional photonic crystal containing a graphene-embedded defect layer

Using the transfer matrix method, the transmission properties of defective one-dimensional photonic crystal are analyzed in the terahertz region. The defect layer is composed of a graphene-embedded dielectric layer. We investigate the variation of the defect mode's frequency as a function of graphene chemical potential for different values of incident angles. The numerical results show that the frequency of the defect mode can be tuned effectively as the chemical potential of graphene nanolayers changes using an applied gate voltage. The present results can be useful in designing tunable graphene-based photonic devices such as filters and sensors in terahertz regions.

Key-lock colloids in a nematic liquid crystal

The Landau-de Gennes free energy is used to study theoretically the effective interaction of spherical "key" and anisotropic "lock" colloidal particles. We assume identical anchoring properties of the surfaces of the key and of the lock particles, and we consider planar degenerate and perpendicular anchoring conditions separately. The lock particle is modeled as a spherical particle with a spherical dimple. When such a particle is introduced into a nematic liquid crystal, it orients its dimple at an oblique angle θ_{eq} with respect to the far field director n_{∞}. This angle depends on the depth of the dimple. Minimization results show that the free energy of a pair of key and lock particles exhibits a global minimum for the configuration when the key particle is facing the dimple of the lock colloidal particle. The preferred orientation ϕ_{eq} of the key-lock composite doublet relative to n_{∞} is robust against thermal fluctuations. The preferred orientation θ_{eq}^{(2)} of the dimple particle in the doublet is different from the isolated situation. This is related to the "direct" interaction of defects accompanying the key particle with the edge of the dimple. We propose that this nematic-amplified key-lock interaction can play an important role in self-organization and clustering of mixtures of colloidal particles with dimple colloids present.

Liquid microlenses and waveguides from bulk nematic birefringent profiles

We demonstrate polarization-selective microlensing and waveguiding of laser beams by birefringent profiles in bulk nematic fluids using numerical modelling. Specifically, we show that radial escaped nematic director profiles with negative birefringence focus and guide light with radial polarization, whereas the opposite - azimuthal - polarization passes through unaffected. A converging lens is realized in a nematic with negative birefringence, and a diverging lens in a positive birefringence material. Tuning of such single-liquid lenses by an external low-frequency electric field and by adjusting the profile and intensity of the beam itself is demonstrated, combining external control with intrinsic self-adaptive focusing. Escaped radial profiles of birefringence are shown to act as single-liquid waveguides with a single distinct eigenmode and low attenuation. Finally, this work is an approach towards creating liquid photonic elements for all-soft matter photonics.

Optical properties of V-groove silicon nitride trench waveguides

We numerically investigate the mode properties of the V-groove silicon nitride trench waveguides based on the experimental results. The trench waveguides are suitable for nonlinear applications. By manipulating the waveguide thicknesses, the waveguides can achieve zero dispersion or a maximized nonlinear parameter of 0.219  W^-1·m^-1 at 1550 nm. Broadband four-wave mixing with a gain of 5.545  m^-1 is presented as an example. The waveguides can also be applied in sensing applications with an optimized evanescent intensity ratio. By etching away the top flat slabs, wider trapezoidal trench waveguides can be utilized for plasmonic sensing thanks to their TE fundamental modes.

Sensing and tuning microfiber chirality with nematic chirogyral effect

Microfibers with their elongated shape and translation symmetry can act as important components in various soft materials, notably for their mechanics on the microscopic level. Here we demonstrate the mechanical response of a micro-object to imposed chirality, in this case, the tilt of disclination rings in an achiral nematic medium caused by the chiral surface anchoring on an immersed microfiber. This coupling between chirality and mechanical response, used to demonstrate sensing of chirality of electrospun cellulose microfibers, is revealed in the optical micrographs due to anisotropy in the elastic response of the host medium. We provide an analytical explanation of the chirogyral effect supported with numerical simulations and perform an experiment to test the effect of the cell confinement and fiber size. We controllably twist the microfibers and demonstrate the response of the nematic medium. More generally the demonstrated study provides means for experimental discrimination of surface properties and allows mechanical control over the shape of disclination rings.

Nematic liquid crystals confined in microcapillaries for imaging phenomena at liquid-liquid interfaces

Here, we report the development of an experimental system based on liquid crystals (LCs) confined in microcapillaries for imaging interfacial phenomena. The inner surfaces of the microcapillaries were modified with octadecyltrichlorosilane to promote an escaped-radial configuration of LCs. We checked the optical appearance of the capillary-confined LCs under a crossed polarizing microscope and determined their arrangement based on side and top views. We then placed the capillary-confined LCs in contact with non-surfactant and surfactant solutions, producing characteristic textures of two bright lines and a four-petal shape, respectively. We also evaluated the sensitivity, stability, and reusability of the system. Our imaging system was more sensitive than previously reported LC thin film systems. The textures formed in microcapillaries were stable for more than 120 h and the capillaries could be reused at least 10 times. Finally, we successfully applied our system to image the interactions of phospholipids and bivalent metal ions. In summary, we developed a simple, small, portable, sensitive, stable, and reusable experimental system that can be broadly applied to monitor liquid-liquid interfacial phenomena. These results provide valuable information for designs using confined LCs as chemoresponsive materials in optical sensors.

Tunable terahertz fishnet metamaterials based on thin nematic liquid crystal layers for fast switching

The electrically tunable properties of liquid-crystal fishnet metamaterials are theoretically investigated in the terahertz spectrum. A nematic liquid crystal layer is introduced between two fishnet metallic structures, forming a voltage-controlled metamaterial cavity. Tuning of the nematic molecular orientation is shown to shift the magnetic resonance frequency of the metamaterial and its overall electromagnetic response. A shift higher than 150 GHz is predicted for common dielectric and liquid crystalline materials used in terahertz technology and for low applied voltage values. Owing to the few micron-thick liquid crystal cell, the response speed of the tunable metamaterial is calculated as orders of magnitude faster than in demonstrated liquid-crystal based non-resonant terahertz components. Such tunable metamaterial elements are proposed for the advanced control of electromagnetic wave propagation in terahertz applications.

Optically switchable grating based on dye-doped ferroelectric liquid crystal with high efficiency

We demonstrate an all-optically switchable ferroelectric liquid crystal (FLC) grating constructed in an alternating binary configuration with different optical properties from domain to domain. A dye-doped FLC is uniformly aligned in one type of domains whereas it is infiltrated into the photo-polymerized networks of reactive mesogens in the other. Compared to conventional nematic LC cases, our FLC grating allows more efficient all-optical modulation and faster diffraction switching between the 0th and the 1st orders in subsecond since the optical response associated with the dye molecules in the layered state is less hindered than in the orientationally ordered state. Our dye-doped FLC grating with periodically infiltrated structures will be useful for designing a new class of all-optically switching systems.

Particle selection through topographic templates in nematic colloids

Liquid crystal colloids have been proposed as suitable candidates for responsive photonic crystals. Large scale growth of such colloidal systems is, however, a challenge and recently template-assisted assembly has been proposed to guide the growth of colloidal crystals, with controlled symmetries, in nematic liquid crystals. Known for their long-range anisotropic interactions, these colloidal systems are stabilized typically at the center of the cells due to strong particle-wall repulsion from the confining substrates. This behaviour is dramatically changed in the presence of topographic patterning. Here we propose the use of topographic modulation of surfaces to select and localize particles in nematic colloids. By considering convex and concave deformations of one of the confining surfaces we show that the colloid-flat surface repulsion may be enhanced or switched into an attraction. In particular, we find that when the colloidal particles have the same anchoring conditions as the patterned surfaces, they are strongly attracted to concave dimples, while if they exhibit different anchoring conditions they are pinned at the top of convex protrusions. Although dominated by elastic interactions the first mechanism is reminiscent of the depletion induced attraction or of the key-lock mechanism, while the second is specific to liquid crystal colloids. These long-ranged, highly tunable, surface-colloid interactions contribute to the development of template-assisted assembly of large colloidal crystals, with well defined symmetries, as required for applications.

Topological switching and orbiting dynamics of colloidal spheres dressed with chiral nematic solitons

Metastable configurations formed by defects, inclusions, elastic deformations and topological solitons in liquid crystals are a promising choice for building photonic crystals and metamaterials with a potential for new optical applications. Local optical modification of the director or introduction of colloidal inclusions into a moderately chiral nematic liquid crystal confined to a homeotropic cell creates localized multistable chiral solitons. Here we induce solitons that “dress” the dispersed spherical particles treated for tangential degenerate boundary conditions, and perform controlled switching of their state using focused optical beams. Two optically switchable distinct metastable states, toron and hopfion, bound to colloidal spheres into structures with different topological charges are investigated. Their structures are examined using Q-tensor based numerical simulations and compared to the profiles reconstructed from the experiments. A topological explanation of observed multistability is constructed.

Fabrication of low-cost thermo-optic variable wave plate based on waveguides patterned on di-ureasil hybrids

An integrated variable wave plate device based on a thermo-optic (TO) effect was fabricated by patterning a waveguide channel through direct UV laser writing on the surface of sol-gel derived organic-inorganic hybrid (di-ureasil) films. The di-ureasil layer is stable up to 250 °C and has a high TO coefficient calculated as -(4.9 ± 0.5) × 10(-4) °C(-1) at 1550 nm. The waveguide temperature was tuned, inducing optical phase retardation between the transverse electric and transverse magnetic modes, resulting in a controllable wave plate. A maximum phase retardation of 77 ° was achieved for a waveguide induced temperature increase of 5 °C above room temperature, with a power consumption of 0.4 W. The thermal linear retardation coefficient was calculated to be 19 ± 1 °/ °C.

Switchable beam steering with zenithal bistable liquid-crystal blazed gratings

Switchable beam steerers based on zenithal bistable liquid crystal (LC) gratings are designed and theoretically investigated. The nematic orientation profiles and the optical transmittance properties of the gratings are rigorously calculated, respectively, via a tensorial formulation of the Landau-de Gennes theory and the full-wave finite-element-method. By proper design of the grating geometry, beam steering with high diffraction efficiency is demonstrated between the two stable LC states. The tolerance of the device performance with respect to material parameters is assessed, evidencing spectral operation windows of more than 50 nm in the visible for a beam steering efficiency higher than 90%.

Beam-splitter switches based on zenithal bistable liquid-crystal gratings

The tunable optical diffractive properties of zenithal bistable nematic liquid-crystal gratings are theoretically investigated. The liquid-crystal orientation is rigorously solved via a tensorial formulation of the Landau-de Gennes theory and the optical transmission properties of the gratings are investigated via full-wave finite-element frequency-domain simulations. It is demonstrated that by proper design the two stable states of the grating can provide nondiffracting and diffracting operation, the latter with equal power splitting among different diffraction orders. An electro-optic switching mechanism, based on dual-frequency nematic materials, and its temporal dynamics are further discussed. Such gratings provide a solution towards tunable beam-steering and beam-splitting components with extremely low power consumption.

Tunable photonic crystals with partial bandgaps from blue phase colloidal crystals and dielectric-doped blue phases

Blue phase colloidal crystals and dielectric nanoparticle/polymer doped blue phases are demonstrated to combine multiple components with different symmetries in one photonic material, creating a photonic crystal with variable and micro-controllable photonic band structure. In this composite photonic material, one contribution to the band structure is determined by the 3D periodic birefringent orientational profile of the blue phases, whereas the second contribution emerges from the regular array of the colloidal particles or from the dielectric/nanoparticle-doped defect network. Using the planewave expansion method, optical photonic bands of the blue phase I and II colloidal crystals and related nanoparticle/polymer doped blue phases are calculated, and then compared to blue phases with no particles and to face-centred-cubic and body-centred-cubic colloidal crystals in isotropic background. We find opening of local band gaps at particular points of Brillouin zone for blue phase colloidal crystals, where there were none in blue phases without particles or dopants. Particle size and filling fraction of the blue phase defect network are demonstrated as parameters that can directly tune the optical bands and local band gaps. In the blue phase I colloidal crystal with an additionally doped defect network, interestingly, we find an indirect total band gap (with the exception of one point) at the entire edge of SC irreducible zone. Finally, this work demonstrates the role of combining multiple - by symmetry - differently organised components in one photonic crystal material, which offers a novel approach towards tunable soft matter photonic materials.

Photo-aligned ferroelectric liquid crystals in microchannels

In this Letter we disclose a method to realize a good alignment of ferroelectric liquid crystals (FLCs) in microchannels, based on photo-alignment. The sulfonic azo dye used in our research offers variable anchoring energy depending on the irradiation energy and thus provides good control on the FLC alignment in microchannels. The good FLC alignment has been observed only when anchoring energy normalized to the capillary diameter is less than the elastic energy of the FLC helix. The same approach can also be used for the different microstructures viz. photonic crystal fibers, microwaveguides, etc. which gives an opportunity for designing a photonic devices based on FLC.

Wavelength-tunable light shaping with cholesteric liquid crystal microlenses

The ability to guide light on the mesoscopic scale is important both scientifically and technologically. Especially relevant is the development of wavelength-tunable light-shaping microdevices. Here we demonstrate the use of cholesteric liquid crystal polygonal textures organized as an array of microlenses for this purpose. The beam shaping is controlled by tuning the wavelength of the incident light in the visible spectrum. By taking advantage of the self-organization property of liquid crystals, the structure of the lens and its optical response are tailored by changing the annealing time of the single layer material during a completely integrated one-step process. The intrinsic helical organization of the layer is the cause of the light shaping and not the shape of the surface as for conventional lenses. A new concept of light manipulation using the structure chirality of liquid crystals is demonstrated, which concerns soft matter photonic circuits to mould the light.

Liquid crystal assisted optical fibres

Microstructured fibres which consist of a circular step index core and a liquid crystal inclusion running parallel to this core are investigated. The attenuation and electro-optic effects of light coupled into the core are measured. Coupled mode theory is used to study the interaction of core modes with the liquid crystal inclusion. The experimental and theoretical results show that these fibres can exhibit attenuation below 0.16 dB cm(-1) in off-resonant wavelength regions and still have significant electro-optic effects which can lead to a polarisation extinction of 6 dB cm(-1).

Liquid crystal (LC) monolayer on Indium Tin Oxide (ITO): structural and electrochemical characterization

Superior quality, stable monolayers of LC compounds on ITO substrates are found to be very effective in orienting bulk LC samples.

Dual-band electro-optic polarization switch based on dual-core liquid-crystal photonic crystal fibers

Compact voltage-controlled all-in-fiber polarization switches are designed and investigated based on dual-core photonic crystal fibers, by selectively infiltrating one of the fiber's cores with a nematic liquid crystal. The electro-optical control of the liquid crystal core's optical properties allows for the splitting of the two orthogonal polarizations, showing crosstalk values lower than -20 dB in a 40 nm window at 1550 nm, for an ultracompact length less than 0.6 mm. With proper selection of the control voltage and the component length, dual-band operation with a crosstalk lower than -20 dB is also demonstrated for the 1300 and 1550 nm telecom bands.

Confinement-sensitive optical response of cholesteric liquid crystals in electrospun fibers

Soft self-assembling photonic materials such as cholesteric liquid crystals are attractive due to their multiple unique and useful properties, in particular, an optical band gap that can be continuously and dynamically tuned in response to weak external influences, easy device integration, compatibility with flexible architectures, and, as shown here, potential for submicrometer optical applications. We study such a system formed by a short-pitch cholesteric confined in the core of polymer fibers produced by coaxial electrospinning, showing that the selective reflection arising from the helical photonic structure of the liquid crystal is present even when its confining cavity is well below a micrometer in thickness, allowing as little as just half a turn of the helix to develop. At this scale, small height variations result in a dramatic change in the reflected color, in striking difference to the bulk behavior. These conclusions are made possible by combining focused ion beam (FIB) dissection and imaging of the internal fiber morphology with optical microscopy. The FIB dissection further reveals that the cross section of the cavity within the fiber can have a shape that is quite different from that of the outside fiber. This is critical for the photonic behavior of the composite fiber because different optical textures are generated not only by change in thickness but also by the shape of the cavity. Our results provide insights into the behavior of cholesterics in submicrometer cavities and demonstrate their potential at such dimensions.

Long-range plasmonic directional coupler switches controlled by nematic liquid crystals

A liquid-crystal tunable plasmonic optical switch based on a long-range metal stripe directional coupler is proposed and theoretically investigated. Extensive electro-optic tuning of the coupler's characteristics is demonstrated by introducing a nematic liquid crystal layer above two coplanar plasmonic waveguides. The switching properties of the proposed plasmonic structure are investigated through rigorous liquid-crystal studies coupled with a finite-element based analysis of light propagation. A directional coupler optical switch is demonstrated, which combines very low power consumption, low operation voltages, adjustable crosstalk and coupling lengths, along with sufficiently reduced insertion losses.