Development and Validation of a New TaqMan Real-Time PCR for the Detection of Ornithobacterium rhinotracheale

Ornithobacterium rhinotracheale (ORT) has been associated with poultry respiratory disease worldwide. The organism is fastidious and isolation is challenging. One TaqMan real-time PCR (qPCR) assay has been developed for the detection of ORT. However, during validating the ORT qPCR, the assay performance was suboptimal. During the in silico evaluation, deviations from the basic parameters for primers and probes designs (e.g., presence of stable undesirable primer-dimers) were observed. The suboptimal design led to low efficiency and low sensitivity of the assay. Initially, modification on the probe was carried out to improve the performance of the assay. However, the assay’s performance (efficiency and sensitivity) was still suboptimal. In this manuscript, we describe the development of a new qPCR assay and the comparison of its performance with the currently available assay. A highly efficient, sensitive, and specific qPCR assay was developed with approximately 1000-folds reduction in the limit of detection (from 3 × 10⁶ plasmid DNA copies/mL to 1 × 10³ plasmid DNA copies/mL). Additionally, the efficiency of the new assay (E = 98.70%) was significantly better than the current assay (E = 73.18%). The newly developed assay is an improved diagnostic tool for the sensitive and efficient diagnosis of ORT from clinical samples.

Label-free bioassay with graphene oxide-based fluorescent aptasensors: A review

Bioassays using a fluorophore and DNA aptamer have been extensively developed due to the ultrasensitivity of fluorophores and recognition ability of DNA aptamers. Conventional fluorescent aptamer-based sensors (aptasensors) require chemical labeling between the fluorophore and aptamer and is technologically impracical for various sensing and assay applications. A simple "mix and go" strategy has been introduced that uses label-free technology as a platform for sensor development. The biosensors comprise a fluorophore, a ssDNA aptamer, and eco-friendly graphene oxide (GO). In the absence of the sensor target, GO quenches the fluorescence of the fluorophore and single-strand DNA aptamer complex. When the target is added, the DNA aptamer conformationally turns into a duplex, G-quadruplexe, or other secondary structure. This structure change leads to release of GO by the fluorophore-aptamer-target complex, generating dramatic fluorescence recovery and amplification. With this sensing method, the DNA aptamer does not need to be chemically labeled. Therefore, flexible fluorophore indicators and ssDNA aptamers can be used in this label-free aptasensing strategy. In this review, we discuss various unlabeled fluorophores, including synthetic small molecular fluorophores and genetically encoded fluorescent proteins, as indicators for generating GO-based fluorescent DNA aptasensors for label-free bioassay.

DNA-templated Au nanoclusters coupled with proximity-dependent hybridization and guanine-rich DNA induced quenching: a sensitive fluorescent biosensing platform for DNA detection

In this paper, the fluorescence signal of poly(A) DNA-templated Au nanoclusters (AuNCs) is found to be greatly quenched by photoinduced electron transfer (PET) when they are close to guanine (G)-rich DNA. Based on the findings, we have designed a low-cost fluorescence biosensing strategy for the sensitive detection of DNA. Highly luminescent and photo-stable poly(A) DNA-AuNCs were utilized as the fluorescent indicator and G-rich DNA was utilized as the fluorescent quencher. In the absence of target DNA, DNA-AuNCs failed to hybridize with the G-rich DNA and did not form the duplex DNA structure. Strong fluorescence intensity at 475 nm was observed due to the DNA-AuNCs being far away from the G-rich DNA. However, in the presence of target DNA, the DNA-AuNCs together with G-rich DNA could hybridize with the target DNA, leading to the 5' terminus of the DNA-AuNCs and the 3' terminus of G-rich DNA being in close proximity and promoting the cooperative hybridization. Therefore, a "Y" junction structure was formed and the G-rich sequences were brought close to the AuNCs. Therefore, the fluorescence intensity of the sensing system decreased significantly. Taking advantage of the poly(A) DNA-templated Au nanoclusters and G-rich DNA proximity-induced quenching, the strategy could be extended to determine other biomolecules by designing appropriate sequences of DNA probes.

The G-BHQ synergistic effect: Improved double quenching molecular beacons based on guanine and Black Hole Quencher for sensitive simultaneous detection of two DNAs

We designed two double quenching molecular beacons (MBs) with simple structure based on guanine (G base) and Black Hole Quencher (BHQ), and developed a new analytical method for sensitive simultaneous detection of two DNAs by synchronous fluorescence analysis. In this analytical method, carboxyl fluorescein (FAM) and tetramethyl-6-carboxyrhodamine (TAMRA) were respectively selected as fluorophore of two MBs, Black Hole Quencher 1 (BHQ-1) and Black Hole Quencher 2 (BHQ-2) were respectively selected as organic quencher, and three continuous nucleotides with G base were connected to organic quencher (BHQ-1 and BHQ-2). In the presence of target DNAs, the two MBs hybridize with the corresponding target DNAs, the fluorophores are separated from organic quenchers and G bases, leading to recovery of fluorescence of FAM and TAMRA. Under a certain conditions, the fluorescence intensities of FAM and TAMRA all exhibited good linear dependence on their concentration of target DNAs (T1 and T2) in the range from 4 × 10^-10 to 4 × 10^-8molL^-1 (M). The detection limit (3σ, n = 13) of T1 was 3 × 10^-10M and that of T2 was 2×10^-10M, respectively. Compared with the existing analysis methods for multiplex DNA with MBs, this proposed method based on double quenching MBs is not only low fluorescence background, short analytical time and low detection cost, but also easy synthesis and good stability of MB probes.

DNA Aptamers against Taiwan Banded Krait α-Bungarotoxin Recognize Taiwan Cobra Cardiotoxins

Bungarus multicinctus α-bungarotoxin (α-Bgt) and Naja atra cardiotoxins (CTXs) share a common structural scaffold, and their tertiary structures adopt three-fingered loop motifs. Four DNA aptamers against α-Bgt have been reported previously. Given that the binding of aptamers with targeted proteins depends on structural complementarity, in this study, we investigated whether DNA aptamers against α-Bgt could also recognize CTXs. It was found that N.atra cardiotoxin 3 (CTX3) reduced the electrophoretic mobility of aptamers against α-Bgt. Analysis of the changes in the fluorescence intensity of carboxyfluorescein-labeled aptamers upon binding toxin molecules revealed that CTX3 and α-Bgt could bind the tested aptamers. Moreover, the aptamers inhibited the membrane-damaging activity and cytotoxicity of CTX3. In addition to CTX3, other N. atra CTX isotoxins also bound to the aptamer against α-Bgt. Taken together, our data indicate that aptamers against α-Bgt show cross-reactivity with CTXs. The findings that aptamers against α-Bgt also suppress the biological activities of CTX3 highlight the potential utility of aptamers in regard to the broad inhibition of snake venom three-fingered proteins.

Ultrasensitive and universal fluorescent aptasensor for the detection of biomolecules (ATP, adenosine and thrombin) based on DNA/Ag nanoclusters fluorescence light-up system

We report here an ultrasensitive strategy based on the recognition-induced conformational alteration of aptamer and fluorescence turn-on abilities of guanine-rich (G-rich) DNA sequence in proximity to silver nanoclusters for adenosine triphosphate (ATP), adenosine (A) and thrombin (TB) detection. Herein, we designed two tailored DNA sequences noted as complementary DNA (abbreviated as c-DNA) and signal probe DNA (abbreviated as s-DNA), respectively. c-DNA is designed as a special structure consisting of a sequence complementary to aptamer at the 3'-end and a guanine-rich DNA sequence at the 5'-end; s-DNA contains a cytosine-rich sequence responsible for Ag NCs templated synthesis at the 3'-end and a link sequence (part of aptamer) complementary to partial of the c-DNA at the 5'-end. In the presence of target, the aptamer associated with the target, resulting in the formation of duplex DNA (dsDNA), the DNA-Ag NCs thereafter could close to the guanine-rich sequence, leading to enhanced fluorescence signal readout. The widespread application of the sensing system is achieved success in the detection of three biomolecules. ATP, adenosine and thrombin in the range of 0.5-8.0 μM, 0.5-7.0 μM and 50-900 nM could be linearly detected with the detection limits of 91.6 nM, 103.4 nM and 8.4 nM, respectively. This label-free and turn-on fluorescent sensing system employing the mechanism proposed here turns out to be sensitive, selective, and convenient for the detection of biomolecules without washing and separation steps.

Highly specific fluorescence detection of T4 polynucleotide kinase activity via photo-induced electron transfer

Sensitive and reliable study of the activity of polynucleotide kinase (PNK) and its potential inhibitors is of great importance for biochemical interaction related to DNA phosphorylation as well as development of kinase-targeted drug discovery. To achieve facile and reliable detection of PNK activity, we report here a novel fluorescence method for PNK assay based on a combination of exonuclease cleavage reaction and photo-induced electron transfer (PIET) by using T4 PNK as a model target. The fluorescence of 3'-carboxyfluorescein-labeled DNA probe (FDNA) is effectively quenched by deoxyguanosines at the 5' end of its complementary DNA (cDNA) due to an effective PIET between deoxyguanosines and fluorophore. Whereas FDNA/cDNA hybrid is phosphorylated by PNK and then immediately cleaved by lambda exonuclease (λ exo), fluorescence is greatly restored due to the break of PIET. This homogeneous PNK activity assay does not require a complex design by taking advantage of the quenching ability of deoxyguanosines, making the proposed strategy facile and cost-effective. The activity of PNK can be sensitively detected in the range of 0.005 to 10 U mL(-1) with a detection limit of 2.1×10(-3) U mL(-1). Research on inhibition efficiency of different inhibitors demonstrated that it can be explored to evaluate inhibition capacity of inhibitors. The application for detection of PNK activity in complex matrix achieved satisfactory results. Therefore, this PIET strategy opens a promising avenue for studying T4 PNK activity as well as evaluating PNK inhibitors, which is of great importance for discovering kinase-targeted drugs.

The binding of the Co(II) complex of dimeric chromomycin A3 to GC sites with flanking G:G mismatches

Some neurological diseases are correlated with expansion of (CXG)n trinucleotide repeats, which contain many contiguous GpC flanked by mismatched X/X base pair. This study focused on the binding of the Co(II) complex of dimeric chromomycin A3(Chro), Co(II)(Chro)2, to DNA with CXG trinucleotide repeats. The present study showed that GC sites with flanking G:G mismatches provide an excellent binding site for Co(II)(Chro)2 as shown by surface plasmon resonance and fluorescence analysis, compared to GC sites with flanking A:A, T:T, or C:C mismatches. In addition, we measured the ability of Co(II)(Chro)2 to act on the hairpin DNA of (CGG)16. We observed that Co(II)(Chro)2 could stabilize and trap the cruciform conformation of (CGG)16. Furthermore, two Co(II)(Chro)2 molecules may bind at the two GpC sites separated by at least one GC site in the hairpin structure of (CGG)16. In a synthetic self-priming DNA model, 5'-(CGG)16(CCG)6-3', Co(II)(Chro)2 can interfere with the expansion process of CGG triplet repeats, as shown by a gel electrophoretic expansion assay. Here, we first report the acting of Co(II)(Chro)2, the groove-binding drug, to trinucleotide repeats. Our results provide the possible biological consequence of Co(II)(Chro)2 bound to CGG triplet repeat sequences.