Tunable synthesis of metal-graphene complex nanostructures and their catalytic ability for solvent-free cyclohexene oxidation in air

Rational Design of ZIF-8 for Constructing Luminescent Biosensors with Glucose Oxidase and AIE-Type Gold Nanoclusters

The development of modern technologies has acclimatized biosensors to complicated applicable scenarios with integrated properties as a whole instead of the pursuit of a single-point breakthrough. Here, we targeted a few concerns in the development of enzyme-based biosensors, including stability, analyte enrichment, and signal transduction, and developed a general biosensing model utilizing enzymes, aggregation-induced emission (AIE) luminogens, and stimuli-responsive framework materials as the units. We propose such proof-of-concept of glucose biosensors by coencapsulating glucose oxidase and AIE-type gold nanoclusters into acid-sensitive zeolite imidazolate framework (ZIF)-8 nanocrystals. The acid-activated degradation of ZIF-8 bridges the molecular signals produced by the enzyme-catalytic reaction of glucose and the photon signals generated by ZIF-8-induced AIE effects of gold nanoclusters, resulting in the "turn-off" model nanoprobes for glucose detection with high selectivity. After embedding the nanoprobes into hollow-out tapes, the formed paper biosensors can conveniently detect glucose with the help of a smartphone.

Advances in Graphene/Inorganic Nanoparticle Composites for Catalytic Applications

Graphene-based nanocomposites with inorganic (metal and metal oxide) nanoparticles leads to materials with high catalytic activity for a variety of chemical transformations. Graphene and its derivatives such as graphene oxide, highly reduced graphene oxide, or nitrogen-doped graphene are excellent support materials due to their high surface area, their extended π-system, and variable functionalities for effective chemical interactions to fabricate nanocomposites. The ability to fine-tune the surface composition for desired functionalities enhances the versatility of graphene-based nanocomposites in catalysis. This review summarizes the preparation of graphene/inorganic NPs based nanocomposites and their use in catalytic applications. We discuss the large-scale synthesis of graphene-based nanomaterials. We have also highlighted the interfacial electronic communication between graphene/inorganic nanoparticles and other factors resulting in increased catalytic efficiencies.

Modulation of Bi2 MoO6 -Based Materials for Photocatalytic Water Splitting and Environmental Application: a Critical Review

Highly active photocatalysts driving chemical reactions are of paramount importance toward renewable energy substitutes and environmental protection. As a fascinating Aurivillius phase material, Bi₂ MoO₆ has been the hotspot in photocatalytic applications due to its visible light absorption, nontoxicity, low cost, and high chemical durability. However, pure Bi₂ MoO₆ suffers from low efficiency in separating photogenerated carriers, small surface area, and poor quantum yield, resulting in low photocatalytic activity. Various strategies, such as morphology control, doping/defect-introduction, metal deposition, semiconductor combination, and surface modification with conjugative π structures, have been systematically explored to improve the photocatalytic activity of Bi₂ MoO₆ . To accelerate further developments of Bi₂ MoO₆ in the field of photocatalysis, this comprehensive Review endeavors to summarize recent research progress for the construction of highly efficient Bi₂ MoO₆ -based photocatalysts. Furthermore, benefiting from the enhanced photocatalytic activity of Bi₂ MoO₆ -based materials, various photocatalytic applications including water splitting, pollutant removal, and disinfection of bacteria, were introduced and critically reviewed. Finally, the current challenges and prospects of Bi₂ MoO₆ are pointed out. This comprehensive Review is expected to consolidate the existing fundamental theories of photocatalysis and pave a novel avenue to rationally design highly efficient Bi₂ MoO₆ -based photocatalysts for environmental pollution control and green energy development.

Magnetically separable and reusable rGO/Fe3O4 nanocomposites for the selective liquid phase oxidation of cyclohexene to 1,2-cyclohexane diol

A series of magnetically separable rGO/Fe₃O₄ nanocomposites with various amounts of graphene oxide were successfully prepared by a simple ultrasonication assisted precipitation combined with a solvothermal method and their catalytic activity was evaluated for the selective liquid phase oxidation of cyclohexene using hydrogen peroxide as a green oxidant. The prepared materials were characterized using XRD, FTIR, FESEM, TEM, HRTEM, BET/BJH, XPS and VSM analysis. The presence of well crystallized Fe₃O₄ as the active iron species was seen in the crystal studies of the nanocomposites. The electron microscopy analysis indicated the fine surface dispersion of spherical Fe₃O₄ nanoparticles on the thin surface layers of partially-reduced graphene oxide (rGO) nanosheets. The decoration of Fe₃O₄ nanospheres on thin rGO layers was clearly observable in all of the nanocomposites. The XPS analysis was performed to evaluate the chemical states of the elements present in the samples. The surface area of the nanocomposites was increased significantly by increasing the amount of GO and the pore structures were effectively tuned by the amount of rGO in the nanocomposites. The magnetic saturation values of the nanocomposites were found to be sufficient for their efficient magnetic separation. The catalytic activity results show that the cyclohexene conversion reached 75.3% with a highest 1,2-cyclohexane diol selectivity of 81% over 5% rGO incorporated nanocomposite using H₂O₂ as the oxidant and acetonitrile as the solvent at 70 °C for 6 h. The reaction conditions were further optimized by changing the variables and a possible reaction mechanism was proposed. The enhanced catalytic activity of the nanocomposites for cyclohexene oxidation could be attributed to the fast accomplishment of the Fe²⁺/Fe³⁺ redox cycle in the composites due the sacrificial role of rGO and its synergistic effect with Fe₃O₄, originating from the conjugated network of π-electrons in its surface structure. The rapid and easy separation of the magnetic nanocomposites from the reaction mixture using an external magnet makes the present catalysts highly efficient for the reaction. Moreover, the catalyst retained its activity for five repeated runs without any drastic drop in the reactant conversion and product selectivity.

A series of magnetically-separable and reusable rGO/Fe₃O₄ nanocomposites were successfully synthesized for the selective liquid-phase oxidation of cyclohexene to 1,2-cyclohexane-diol.

One-step synthesis of ZnS-N/C nanocomposites derived from Zn-based chiral metal–organic frameworks with highly efficient photocatalytic activity for the selective oxidation of cis-cyclooctene

ZnS-N/C derived from Zn-based chiral MOFs exhibits excellent photocatalytic activity for the selective oxidation of cis-cyclooctene under mild conditions.

Three-dimensional graphene-based spheres and crumpled balls: micro- and nano-structures, synthesis strategies, properties and applications

3D spherical and crumpled-ball graphene-based architectures with diverse, fascinating properties and applications are reviewed for the first time.

Room-temperature synthesis of mesoporous CuO and its catalytic activity for cyclohexene oxidation

CuO nanoleaves with a mesoporous structure have been synthesized in the presence of triethylamine at room temperature. The mesoporous CuO nanoleaves exhibit excellent catalytic activity for solvent-free cyclohexene oxidation with oxygen.

Copper nanoparticle/carbon quantum dots hybrid as green photocatalyst for high-efficiency oxidation of cyclohexane

Cu/CQDs hybrids as photocatalysts exhibit efficient photocatalytic activity in the oxidation of cyclohexane under visible light and mild conditions.

Modification of the catalytic properties of the Au4 nanocluster for the conversion of methane-to-methanol: synergistic effects of metallic adatoms and a defective graphene support

By means of the density functional theory calculations, enhanced catalytic activity of Au₄ cluster for the partial oxidation of methane with the N₂O oxidant is observed when the cluster is deposited on top of the Pd/graphene.

Silver modified carbon quantum dots for solvent-free selective oxidation of cyclohexane

The silver modified carbon quantum dots (Ag–CQDs) exhibit excellent catalytic ability for cyclohexane oxidation under visible light.

CuNi/Co composites prepared by electroless deposition: structure and catalytic activity for the oxidation of cyclohexene with oxygen

CuNi/Co composites prepared by electroless deposition behave as novel catalysts for the solvent-free oxidation of cyclohexene with oxygen. Both Cu content and microstructure can significantly affect the catalytic activity.

Nitrogen-doped graphene interpenetrated 3D Ni-nanocages: efficient and stable water-to-dioxygen electrocatalysts

Herein, we report the synthesis of a nitrogen-doped graphene (NGr) interpenetrated 3D Ni-nanocage (Ni-NGr) electrocatalyst by a simple water-in-oil (w/o) emulsion technique for oxidation of water to dioxygen. Correlation of adsorption of NGr and subsequent interpenetration through the specific surface plane of nickel particles as well as the concomitant interaction of N and C with Ni in the nano-regime has been investigated. Apart from the benefits of the synergistic interactions between Ni, N, and C, the overall integrity of the structure and its intra-molecular connectivity within the framework help in achieving better oxygen evolution characteristics at a significantly reduced overpotential. The engineered Ni-NGr nanocage displays a substantially low overpotential of ∼290 mV at a practical current density of 20 mA cm(-2) in 0.1 M KOH. In comparison, NGr and Ni-particles as separate entities give overpotentials of ∼570 and ∼370 mV under similar conditions. Moreover, the long term stability of Ni-NGr was investigated by anodic potential cycling for 500 cycles and an 8.5% increment in the overpotential at 20 mA cm(-2) was observed. Additionally, a chronoamperometric test was performed for 15 h at 20 mA cm(-2), which highlights the better sustainability of Ni-NGr under the actual operating conditions. Finally, the quantitative estimation of evolved oxygen was monitored by gas chromatography and was found to be 70 mmol h(-1) g(-1) of oxygen, which is constant in the second cycle as well.

A highly sensitive electrochemical sensor for simultaneous determination of hydroquinone and bisphenol A based on the ultrafine Pd nanoparticle@TiO2 functionalized SiC

A titanium dioxide-silicon carbide nanohybrid (TiO2-SiC) with enhanced electrochemical performance was successfully prepared through a facile generic in situ growth strategy. Monodispersed ultrafine palladium nanoparticles (Pd NPs) with a uniform size of ∼2.3 nm were successfully obtained on the TiO2-SiC surface via a chemical reduction method. The Pd-loaded TiO2-SiC nanohybrid (Pd@TiO2-SiC) was characterized by transmission electron microscopy and X-ray diffractometry. A method for the simultaneous electrochemical determination of hydroquinone (HQ) and bisphenol A (BPA) using a Pd@TiO2-SiC nanocomposite-modified glassy carbon electrode was established. Utilizing the favorable properties of Pd NPs, the Pd@TiO2-SiC nanohybrid-modified glassy carbon electrode exhibited electrochemical performance superior to those of TiO2-SiC and SiC. Differential pulse voltammetry was successfully used to simultaneously quantify HQ and BPA within the concentration range of 0.01-200 μM under optimal conditions. The detection limits (S/N=3) of the Pd@TiO2-SiC nanohybrid electrode for HQ and BPA were 5.5 and 4.3 nM, respectively. The selectivity of the electrochemical sensor was improved by introducing 10% ethanol to the buffer medium. The practical application of the modified electrode was demonstrated by the simultaneous detection of HQ and BPA in tap water and wastewater samples. The simple and straightforward strategy presented in this paper are important for the facile fabrication of ultrafine metal NPs@metal oxide-SiC hybrids with high electrochemical performance and catalytic activity.

Primary and tertiary amines bifunctional graphene oxide for cooperative catalysis

In this study, primary and tertiary amine bifunctional graphene oxide (GO-NH2-NEt2) was prepared by silylanization of graphene oxide (GO) with amine-terminal silanes. The obtained GO-NH2-NEt2 was characterized by infrared spectrum (FTIR), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), high-resolution transmission electron microscopy (HRTEM) and X-ray photoelectron spectroscopy (XPS). Systematic studies demonstrated the GO-NH2-NEt2 had excellent catalytic activities and 100% selectivity in the classic trans-β-nitrostyrene forming reaction.