Advances in Computational Methods for Modeling Photocatalytic Reactions: A Review of Recent Developments

Photocatalysis is a fascinating process in which a photocatalyst plays a pivotal role in driving a chemical reaction when exposed to light. Its capacity to harness light energy triggers a cascade of reactions that lead to the formation of intermediate compounds, culminating in the desired final product(s). The essence of this process is the interaction between the photocatalyst's excited state and its specific interactions with reactants, resulting in the creation of intermediates. The process's appeal is further enhanced by its cyclic nature-the photocatalyst is rejuvenated after each cycle, ensuring ongoing and sustainable catalytic action. Nevertheless, comprehending the photocatalytic process through the modeling of photoactive materials and molecular devices demands advanced computational techniques founded on effective quantum chemistry methods, multiscale modeling, and machine learning. This review analyzes contemporary theoretical methods, spanning a range of lengths and accuracy scales, and assesses the strengths and limitations of these methods. It also explores the future challenges in modeling complex nano-photocatalysts, underscoring the necessity of integrating various methods hierarchically to optimize resource distribution across different scales. Additionally, the discussion includes the role of excited state chemistry, a crucial element in understanding photocatalysis.

Handleable TiO2-coated zeolitic material for photodecomposition of caffeine boosted by urine matrix

The photocatalytic decomposition of caffeine under UV-light irradiation was observed for the first time in a matrix of synthetic urine using granules of hydrogenated and iron-exchanged natural zeolite, coated with two loadings of TiO₂. A natural clinoptilolite-mordenite blend was used to prepare photocatalytic adsorbents coated with TiO₂ nanoparticles. The performance of the obtained materials was tested in the photodegradation of caffeine, a water contaminant of emerging concern. The photocatalytic activity was better in the urine matrix, due to the formation of surface complexes on the TiO₂ coating, cation exchange performed by the zeolite support, and use of the carrier electrons in the reduction of ions, affecting recombination of the electrons and holes during photocatalysis. The composite granules maintained photocatalytic activity for at least four cycles, with more than 50% of caffeine removal in the synthetic urine matrix.

Spectroscopic and kinetic characterization of photogenerated charge carriers in photocatalysts

The catastrophic consequences of increased power consumption, such as drastically rising CO₂ levels, natural disasters, environmental pollution and dependence on fossil fuels supplied by countries with totalitarian regimes, illustrate the urge to develop sustainable technologies for energy generation. Photocatalysis presents eco-friendly means for fuels production via solar-to-chemical energy conversion. The conversion efficiency of a photocatalyst critically depends on charge carrier processes taking place in the ultrafast time regime. Transient absorption spectroscopy (TAS) serves as a perfect tool to track those processes. The spectral and kinetic characterization of charge carriers is indispensable for the elucidation of photocatalytic mechanisms and for the development of new materials. Hence, in this review, we will first present the basics of TAS and subsequently discuss the procedure required for the interpretation of the transient absorption spectra and transient kinetics. The discussion will include specific examples for charge carrier processes occurring in conventional and plasmonic semiconductors.

Metal-Organic Frameworks as Photocatalysts for Solar-Driven Overall Water Splitting

Metal-organic frameworks (MOFs) have been frequently used as photocatalysts for the hydrogen evolution reaction (HER) using sacrificial agents with UV-vis or visible light irradiation. The aim of the present review is to summarize the use of MOFs as solar-driven photocatalysts targeting to overcome the current efficiency limitations in overall water splitting (OWS). Initially, the fundamentals of the photocatalytic OWS under solar irradiation are presented. Then, the different strategies that can be implemented on MOFs to adapt them for solar photocatalysis for OWS are discussed in detail. Later, the most active MOFs reported until now for the solar-driven HER and/or oxygen evolution reaction (OER) are critically commented. These studies are taken as precedents for the discussion of the existing studies on the use of MOFs as photocatalysts for the OWS under visible or sunlight irradiation. The requirements to be met to use MOFs at large scale for the solar-driven OWS are also discussed. The last section of this review provides a summary of the current state of the field and comments on future prospects that could bring MOFs closer to commercial application.

Morphology and Photocatalytic Activity of Zinc Oxide Reinforced Polymer Composites: A Mini Review

There is an approximately 3% of fresh water available globally for utilization, while the rest of the water is not available for usage, leaving billions of people with less water. Less water availability means that the majority of water consists of pollutants either in ground water or drinking water, which in turn may have a negative impact on the environment and people. Various methods such as plasma technology, flocculation, neutralization, and disinfection have been utilized for wastewater treatment. The wastewater treatment methods have been found to be selective in terms of the removal of other pollutants, as a result, the majority of them are unable to remove pollutants such as antibiotics at a trace level. In order to ensure that there is a complete removal of pollutants from water, there is a need for the development of alternative wastewater treatment methods. The use of solar light by photocatalysis is an alternative method for the degradation of toxic pollutants. Different photocatalysts such as zinc oxide (ZnO), titanium dioxide (TiO2), and silver (Ag) have been used in the process of photocatalysis. However, the above photocatalysts were found to have drawbacks such as agglomeration at higher contents and health problems during transportation. To solve the above problem, the nanoparticles were immobilized in various matrices such as polymers and ceramics, with polymers being preferred because of low cost, chemical inertness, and high durability. The current review discusses various methods for the preparation of ZnO and its synergy with other nanoparticles incorporated in various polymer matrices. Because it is known that the preparation method(s) affects the morphology, the morphology and the photocatalytic activity of various ZnO/polymer composites and hybrid systems of ZnO/other nanoparticles/polymer composites are discussed in depth.

Catalytic ozonation with vanadium oxide-doped TiO2 nanoparticles for the removal of di-2-ethylhexyl phthalate

Among various plastic additives, di-2-ethylhexyl phthalate (DEHP) has been a great concern due to its high leaching potential and harmful effects on both human and the ecosystem. For the effective oxidation and mineralization of DEHP by ozone in the existing TiO₂ catalytic processes, the heterogeneous catalyst, vanadium oxide (V₂O₅)-incorporated TiO₂ (V₂O₅/TiO₂), was synthesized. The generation of hydroxyl radicals was promoted by cyclic redox reactions of vanadium atoms in V₂O₅/TiO₂ via the increase of surface oxygen vacancies by the replacement of V⁵⁺ species in the lattice of TiO₂. The catalytic ozonation in the presence of V₂O₅/TiO₂ exhibited the significantly higher degradation of DEHP with the pseudo-second-order kinetic constant of 1.7 × 10⁵ mM^-1min^-1 and the removal efficiency of 58.7% after 60 s in 2 mg/L of ozone. The degradation of DEHP was initiated by the shortening of the alkyl-side chain followed by the opening of esterified benzene moieties.

Development of a TiO2/Sepiolite Photocatalyst for the Degradation of a Persistent Organic Pollutant in Aqueous Solution

A clay-based TiO₂ nanocomposite material was synthesized by a facile method, to investigate its structure and photocatalytic efficiency. The supported TiO₂ nanoparticles were generated using a sol-gel method, and subsequently, mixed with a suspension of sepiolite. The material was recovered in powder form (Mc-80) and then calcined to properly arrange the crystal lattice of the TiO₂ particles for use in heterogeneous photocatalysis (Mc-80-500). A powder X-ray diffractogram of Mc-80-500 revealed a dispersion of anatase and rutile phase TiO₂ particles on the clay surface, exhibiting a size in the order of 4-8 nm. TEM images of Mc-80-500 confirmed the presence of isolated TiO₂ beads on the surface of the fibrous sepiolite. The specific surface area of Mc-80-500 was larger than that of raw sepiolite and that of free TiO₂ nanoparticles. Mc-80-500 was found to be more efficient in heterogeneous photocatalysis compared to other TiO₂ materials based on sepiolite. Total depollution of a reactive dye (Orange G) was achieved after 1 h irradiation time, which is relatively quick compared to previous reports. The photocatalyst material can be washed with distilled water without chemical additives or calcination, and can be reused several times for photocatalysis, without loss of efficiency.

Designing Sites in Heterogeneous Catalysis: Are We Reaching Selectivities Competitive With Those of Homogeneous Catalysts?

A critical review of different prominent nanotechnologies adapted to catalysis is provided, with focus on how they contribute to the improvement of selectivity in heterogeneous catalysis. Ways to modify catalytic sites range from the use of the reversible or irreversible adsorption of molecular modifiers to the immobilization or tethering of homogeneous catalysts and the development of well-defined catalytic sites on solid surfaces. The latter covers methods for the dispersion of single-atom sites within solid supports as well as the use of complex nanostructures, and it includes the post-modification of materials via processes such as silylation and atomic layer deposition. All these methodologies exhibit both advantages and limitations, but all offer new avenues for the design of catalysts for specific applications. Because of the high cost of most nanotechnologies and the fact that the resulting materials may exhibit limited thermal or chemical stability, they may be best aimed at improving the selective synthesis of high value-added chemicals, to be incorporated in organic synthesis schemes, but other applications are being explored as well to address problems in energy production, for instance, and to design greener chemical processes. The details of each of these approaches are discussed, and representative examples are provided. We conclude with some general remarks on the future of this field.

Hole utilization in solar hydrogen production

In photochemical production of hydrogen from water, the hole-mediated oxidation reaction is the rate-determining step. A poor solar-to-hydrogen efficiency is usually related to a mismatch between the internal quantum efficiency of photon-induced hole generation and the apparent quantum yield of hydrogen. This waste of photogenerated holes is unwanted yet unavoidable. Although great progress has been made, we are still far away from the required level of dexterity to deal with the associated challenges of wasted holes and its consequential chemical effects that have placed one of the greatest bottlenecks in attaining high solar-to-hydrogen efficiency. A critical assessment of the hole and its related phenomena in solar hydrogen production would, therefore, pave the way moving forward. In this regard, we focus on the contextual and conceptual understanding of the dynamics and kinetics of photogenerated holes and its critical role in driving redox reactions, with the objective of guiding future research. The main reasons behind and consequences of unused holes are examined and different approaches to improve overall efficiency are outlined. We also highlight yet unsolved research questions related to holes in solar fuel production.

Advances in nanomaterials for heterogeneous photocatalysis

Photocatalysis method for environmental applications has been using for a long time. This review article traces back the origin of catalysis, its classification and journey of development to heterogeneous photocatalysis and the article’s novelty is in the simplicity, and easily understandable language, designed for the beginners. These heterogeneous photocatalysts are grouped into eleven different categories. As the paper is focused on photocatalysis, an insight on fundamental principles and mechanisms of photocatalysis are explained systematically with schematic illustrations and reactions that take place during redox- oxidation and reduction reactions in photocatalysis. With an approach towards utilizing green energy and expanding the photocatalyst’ absorption wavelength range towards the visible regime, bandgap engineering techniques by adopting doping and hetero-structures are explained with examples of different materials. In addition, dominating factors of photocatalysis reaction viz. composition of a heterogeneous photocatalyst, doping, hetero-structures, pH, surface defects on photocatalysis reaction are explored, focussing on variable charge transfer mechanisms. The main influencing factor in generating reactive oxygen species is pH of the photocatalysis reaction and are studied indetail. The effect of alkalinity or acidity in catalyst surfaces and molecular interaction depending upon the point zero charges of the photocatalyst are discussed. For the better study of catalyst properties, careful analysis and study is a much-needed field as a scope for further improvement. Hence, this article will guide a beginner to understand the photocatalysis topic with ease.

Unpredicted photocatalytic activity of clinoptilolite-mordenite natural zeolite

Zeolites are not often used directly as photocatalysts. Their framework and nanocavities have served as support or hosts for photoactive materials or traces of transition metals functioning as photoactive sites for catalysing decomposition and oxidation reactions in the gas phase. Research in this area has been limited to a few synthetic zeolites and in this context, efforts are directed to the preparation of new zeolite-based photocatalysts, when in nature there is an abundance of materials with properties yet to be discovered. We report the application of a natural clinoptilolite–mordenite zeolite as an efficient self-photocatalytic material for the decomposition of caffeine in aqueous solution. Adsorption experiments, combined with textural, crystallographic, and spectroscopic characterization were performed comparatively for the natural zeolite, a synthetic homologue, and the iron-exchanged zeolite. The neat zeolite containing 1.2 wt% of endogenous iron exhibited 99% decomposition of caffeine after 4 h irradiation and a faster reaction rate, followed by the synthetic sample. In contrast, the iron-loaded sample was the less effective zeolite because of pore blocking. Caffeine adsorption occurred on the outer zeolite surface and the photoproducts were hydroxylated pyrimidine rings and linear amide derivatives.

Clinoptilolite + mordenite are self-photocatalytic in the decomposition of caffeine under UV-irradiation because endogenous iron originates photoinduced species and intermediates are confined in zeolite nanopores.

Light-driven catalysis with engineered enzymes and biomimetic systems

Efforts to drive catalytic reactions with light, inspired by natural processes like photosynthesis, have a long history and have seen significant recent growth. Successfully engineering systems using biomolecular and bioinspired catalysts to carry out light-driven chemical reactions capitalizes on advantages offered from the fields of biocatalysis and photocatalysis. In particular, driving reactions under mild conditions and in water, in which enzymes are operative, using sunlight as a renewable energy source yield environmentally friendly systems. Furthermore, using enzymes and bioinspired systems can take advantage of the high efficiency and specificity of biocatalysts. There are many challenges to overcome to fully capitalize on the potential of light-driven biocatalysis. In this mini-review, we discuss examples of enzymes and engineered biomolecular catalysts that are activated via electron transfer from a photosensitizer in a photocatalytic system. We place an emphasis on selected forefront chemical reactions of high interest, including CH oxidation, proton reduction, water oxidation, CO₂ reduction, and N₂ reduction.

Plasma Enhanced Wet Chemical Surface Activation of TiO2 for the Synthesis of High Performance Photocatalytic Au/TiO2 Nanocomposites

To enhance the effectiveness of TiO2 as a photocatalyst, it was believed that the drawbacks of the large bandgap and the rapid electron-hole recombination can be overcome by coupling TiO2 with plasmonic metal nanoparticles. The incorporation of the nanoparticles onto the TiO2 surface requires a suitable procedure to achieve the proper particle adhesion. In this work, we propose a simple, clean, and effective surface activation of TiO2 using plasma enhanced wet chemical surface treatment. Under only 5 min of plasma treatment in a 3% NH3/3% H2O2 solution, gold nanoparticles were found better adhered onto the TiO2 surface. Hence, the methylene blue degradation rate of the Au/TiO2 under sunlight treated was improved by a factor of 3.25 times in comparison to non-treated Au/TiO2 and by 13 times in comparison to the bare rutile TiO2.

UPS and UV spectroscopies combined to position the energy levels of TiO2 anatase and rutile nanopowders

Positioning of absolute energy levels and the quantitative description of occupied levels obtained for TiO₂ nanopowders, combining UPS and UV-Vis spectroscopies.

Size-controlled gold nanoparticles on octahedral anatase particles as efficient plasmonic photocatalyst

Octahedral anatase particles (OAPs), prepared by ultrasonication-hydrothermal reaction (US-HT), were modified with 2 wt% of gold by photodeposition. Conditions of US-HT process such as durations of US and durations of HT were varied to obtain OAPs products different by physicochemical and morphological properties. Au/OAPs samples were characterized by X-ray diffraction (XRD), scanning transmission electron microscopy (STEM), X-ray photoelectron spectroscopy (XPS) and diffuse reflectance spectroscopy (DRS). The photocatalytic activity was tested under UV irradiation for decomposition of acetic acid (CO2 system) and dehydrogenation of methanol (H2 system) under aerobic and anaerobic conditions, respectively, and for oxidation of 2-propanol under visible light irradiation. Photodeposition of gold was very fast for all OAPs samples (0.5-10 min) under Ar atmosphere, and the clear correlation between the content of electron traps (ETs) and the induction period, during which nanoparticles (NPs) of gold are formed, indicates that ETs in titania samples are a key-factor for rapidity of gold photodeposition on titania surface. It was found that better morphology of titania (larger content of faceted particles) resulted in formation of larger gold NPs, while small gold NPs were deposited on structural defects. Modification of OAPs with gold NPs resulted in significant enhancement of photocatalytic activity, being e.g., 1.5 (CO2 system), 7.7 (H2 system), and even more than 40 under vis irradiation. It was found that both the properties of titania and gold are crucial for resultant photocatalytic activity, but a direct correlation between one structural/physical property and photocatalytic activity could not be obtained since all structural properties changed simultaneously when conditions of photocatalyst preparation (US-HT) were changed. Therefore, gold NPs of controlled sizes were deposited on OAPs product with the best morphology by modified photodeposition method. Clear correlation between photocatalytic activity under visible light and the size of gold NPs indicates that gold properties are decisive for visible light activity rather than titania properties. 3D-FDTD simulations confirm that an increase in the size of gold NPs results in extended surface areas with field enhancement.

Heterometallic Lanthanide-Titanium Oxo Clusters: A New Family of Water Oxidation Catalysts

We report the synthesis and photoelectrochemical activity of three lanthanide-titanium oxo clusters (LTOCs), formulated as [Ln₈Ti₁₀(μ₃-O)₁₄(tbba)₃₄(Ac)₂(H₂O)₄(THF)₂]·2Htbba [Ln = Eu (1), Sm (2), and Gd (3); Htbba = 4-tert-butylbenzoic acid; Ac^- = acetate]. These stable compounds are efficient catalysts of photoelectrochemical water oxidation with high turnover numbers (7581.0 for 1, 5172.4 for 2, and 5413.0 for 3) and high turnover frequencies (2527.0 for 1, 1724.1 for 2, and 1804.0 for 3). The differences in the photoelectrochemical activity among these three compounds may be related to the differences in their band gaps. This work shows that the heterometallic LTOCs provide a tunable platform for the design of highly effective water oxidation catalysts.

Water Will Be the Coal of the Future-The Untamed Dream of Jules Verne for a Solar Fuel

This article evokes the futuristic visions of two giants, one a writer, Jules Verne, who foresaw water as the coal of the future, and the other a scientist, Giacomo Ciamician, who foresaw the utilization of solar energy as an energy source with which to drive photochemical and photocatalytic reactions for the betterment of mankind. Specifically, we examine briefly the early work of the 1960s and 1970s on the photosplitting of free water and water adsorbed on solid supports, based mostly on metal oxides, from which both hydrogen and oxygen evolve in the expected stoichiometric ratio of 2 to 1. The two oil crises of the 1970s (1973 and 1979) spurred the interest of researchers from various disciplines (photochemistry, photo-catalysis and photoelectrochemistry) in search of a Holy Grail photocatalyst, process, or strategy to achieve efficient water splitting so as to provide an energy source alternative to fossil fuels. Some approaches to the photosplitting of water adsorbed on solid insulators (high bandgap materials; E_bg ≥ 5 eV) and semiconductor photocatalysts (metal oxides) are described from which we deduce that metal oxides with bandgap energies around 5 eV (e.g., ZrO₂) are more promising materials to achieve significant water splitting on the basis of quantum yields than narrower bandgap photocatalysts (e.g., TiO₂; E_bg ≈ 3.0-3.2 eV), which tend to be relatively inactive by comparison. Although proof of concept of the photosplitting of water has been demonstrated repeatedly in the last four decades, much remains to be done to find the Holy Grail photocatalyst and/or strategy to achieve significant yields of hydrogen.

Facile preparation of N-doped TiO2at ambient temperature and pressure under UV light with 4-nitrophenol as the nitrogen source and its photocatalytic activities

This article reports the facile preparation of N-doped TiO₂(P25) in aqueous media at ambient temperature and pressure under inert conditions with 4-nitrophenol as the nitrogen source.

Preparation of h-MoO3 and α-MoO3 nanocrystals: comparative study on photocatalytic degradation of methylene blue under visible light irradiation

A detailed study on visible light photocatalytic degradation of methylene blue (MB) has been investigated in aqueous heterogeneous media containing hexagonal phase molybdenum oxide (h-MoO3) nanocrystals (NCs) which was identified as a new material for visible light driven photocatalysis. A simple and template-free solution based chemical precipitation method was employed to synthesize h-MoO3 NCs by reacting ammonium heptamolybdate tetrahydrate (AHM) with nitric acid. The formation and growth mechanism of h-MoO3 microstructures was explained. In addition, by annealing the h-MoO3 sample, the phase stability of hexagonal was retained up to 410 °C and showed an irreversible phase transition from hexagonal (h-MoO3) to highly stable orthorhombic phase (α-MoO3). Finally, the photocatalytic activities of h-MoO3 and α-MoO3 samples were evaluated using the degradation of MB, representing an organic pollutant of dye wastewater. The effects of various experimental parameters such as catalyst loading, initial dye concentration, light intensity, and operating temperature were analyzed for the degradation of MB. The results demonstrated that the efficiency of visible light assisted MB degradation using h-MoO3 NCs can be effectively enhanced by catalyst loading, light intensity, and operating temperature. However, the efficiency declined with the increase in initial dye concentration. Optimum conditions for higher photocatalytic performance were recognized as a catalyst loading of 100 mg L(-1), a dye concentration of 12 mg L(-1), a light intensity of 350 mW cm(-2), and an operating temperature of 45 °C.

Review on modified N–TiO2 for green energy applications under UV/visible light: selected results and reaction mechanisms

Modifications of the activity, band structure, morphology, optical and electronic properties of N–TiO₂ for energy and environmental applications.

Solar photocatalysis for water disinfection: materials and reactor design

This comprehensive review addresses the fundamentals of photocatalytic mechanism, recent developments in materials synthesis and reactor design.